Nothing like a nutritional breakfast with a starter, alternator, a TFSi head, piston and rings.. and 5 qts of syn Mobil 1 to wash it all down.. LOL you have that awesome palace of a shop and yet your kitchen is the place where turbie lives .. excellent video I like the sound of the ported exhaust flange 👍🏻
I just put one in yesterday and I get +1.5MPG and slightly better performance out of the engine. The increase in sound is very slight for my though. Best $30 spent on a car, thank you!
Other parts I have noticed can be cheap while still being good are the turbo charge pipes. I got a whole set off ARM for a tad over 160$ and my buddy bought only the turbo pipe from ECS tuning and it costed him over 200$. Looking at the two they are exactly the same, bends, welds, etc.. Except the paint on them.. I'm not looking to cheap out on parts but when I see stuff like that there's zero point in burning money away that could be put somewhere else lol
Dat was one bad muffler delete! But Naptown sure showed dat muffler delete who the daddy was!! What a bad-ass!! BTW, dat was real man's kitchen...no pots or pans, just engine part strewn all over!🤣
Haha dude your fuckin awesome I love how you explain every single step in a funny and understanding way.so I wanna say thank you very much for your really helpful video.
Love your channel bro‼️ And look at that bachelor pad‼️🤣🤣🤣🤣 no chick tell you to get that alternator off the counter or that rubber mallet out of the kitchen 😂😂😂😂 Keep up the great work dude ✌🏼
This is actually the way i found out my turbo was replaced before, i wanted to buy a muffler delete but i checked out the turbo first and i was kind of confused that my turbo does not have those bolts there so i can't change that because that part is fused together with the rest of the turbo. It's a borgwarner one, i think is as good as the OEM and it does have an advantage, the wastegate actuator is adjustable so if it's just a little sloppy there you could tight the nut a little bit and wastegate will get a little bit tighter, that is what i did anyway.
Hey bro you seem like a solid dude an s straight shooter in all your videos where are you located? I've got a mk6 GTI I'm doing the head on now and am hoping to build or have a foraged internals motor put together, I do my own wrenching but I appreciate your info you been giving away in the videos lmk I'm in southern cali
Great video. I've got a video suggestion! I recently got a 2013 Audi Q5 and found out there were multiple recalls (fuel flange, heater something, and water pump). Could you go over what these were, the technical issues, show the old part's shortcomings (hopefully if you have them), the dealer installed/exchanged parts, and ultimately your thoughts whether these new parts will help. Thanks! Keep doing what you're doing for the community!
The fuel flange is like a piece of sticky rubber that just goes over the top of the fuel pump, the after run coolant pump I recently did a video on and the heater something I can’t remember what that might be.
Pay naptown does a noisy timing chain sound like a vacuum leak or a hissing coming from the very front of the engine near the timing chain cover.? I could tell it was replaced there was a hole drilled and the radiator support to get the one bolt out of the camshaft oil dipstick holder and it was broke farther down. And there's some kind of sealant on the top of the timing chain cover evidence that it was removed
Sounds like a vacuum leak you should probably have a lean fault you can hear the idle raise by spraying carb cleaner near the hissing sound but more accurate way of doing it is with a scan tool looking at fuel trims when you spray
Hey Man, I love watching your videos and I'm a tech too. I also own the Shitty Famous Audi A52.0tfsi CDNB Engine code. I had the piston rings problem and some other usual ones too, i solved everything out and also have done a full engine rebuild, valves, pistons, rings, bearings etc. i have ran my engine in for total 5k miles, its running smooth, no problems what so ever. Im looking to do a Stage 1 Remap. After engine rebuild im running as a estimated 200BHP. Stock power was 185BHP. i have a few mods, better coil packs, plugs and Custom Valved exhaust Catback that i made at work, vacuum controlled by boost using a secondary vacuum pump that i installed near the manifold so the valves open under boost. Anyways, Stage 1 qoutes are giving me 260-270BHP Estimated on dyno. I wanted to get some insight from you, im thinking a overall 60-90bhp increase from stock may cause damage to the engine. whats your option on the engines, i know they are good for power. I usually tell my customers that have other makes and models not to tune their cars for max power on stage 1. but theres many people pulling crazy numbers with the EA1888 Blocks and the CDNB, CDNC engine codes. Whats your thoughts on this? Would it be trust worthy and safe to run 260+ bhp on "stock internals" I Haven't got any further issues with the engine and have resolved everything
Hey mr naptown I need your help! What diagnostic scanner would you suggest to buy for vag cars? Maybe an idea for a video in the future. I had a maxme from matco but it took a dump and I’m looking for a new one, I’m just curious on what the audi god has to say.
I bought the same part, Followed the same process of "forcing" 😂😂 it worked but the breaking in was a little scary with acceleration just cutting in and out...stopped after 1 day..anyone think it was something else? also your kitchen is hilarious!!
I put it in one of my cars and never experienced that, it’s hard to tell a difference with it installed but I like the idea of a smooth pipe without the turbulence
You can hear it the best when it’s up hill with a load and accelerating. It doesn’t make that much of a difference in noise unless you’re paying attention with the window down, for that reason it’s hard to get on film. At the very end of this video I try to get the noise but like I said it works better up a hill with acceleration and I don’t really have any hills close to where I live. ua-cam.com/video/vimABEhnb78/v-deo.html
Not much after that maybe charge pipes downpipe and a stage 2 tune with a stage 2 clutch (or stage 1 just not stock)I wouldn’t recommend going to a stage 1 cuz the power gain from stage 2 is much more only spending a few hundred extra on the downpipe (stage 1 doesn’t really require it but it’s recommended so eh 🤷♂️) also front intercooler i got an intake and diverter valve and i already get crazy turbo spools i have a vid on my page if u wanna check it out 🫶🏻
It’s probably fine but I stay away from China parts as much as possible. A rule of thumb is, you need to buy parts from a reputable parts supplier and not off some Amazon or eBay store
If you notice that updated piece had a two stage o-ring the top o-ring seals so it’s a smooth pipe all the way down. I don’t believe the factory muffler piece even reaches to the top. I did think about that as well though because I believe in jb weld enough that it wouldn’t fall or break out with the turbo heat but it’s still probably just a bad idea.
Definitely make more power with the bigger profile on the turbo wheel but it’s always a slight trade off for waiting for boost until a little further in the rpm range then it hits a little harder. For this reason I think it’s pointless to waist time and money for anything bigger than a k04. On a 2.0t 4 cylinder.
@@NaptownTuner FOR SURE. are ko4's less prone to have the whole wastegate failure? whats the going rate for a NAPTOWN TUNER 's EYE certified KO4? and if u have an extra pair of the NEPEX PLIERS ,that would be greatLY APPRECIATED! jk but not really
@@newacount1777 ya only the factory k03 ihi turbos do that with the junk bushing in the linkage that wears out and gets sloppy. K04 starts at $1500 that one I have that I haven’t installed yet I show in one of my videos, I paid $2300 it came with a down pipe and it’s a slightly better turbo made by borgwarner
Would you say the 2.0 tfsi is a reliable engine once the timing chain and oil consumption issues etc have been resolved? I have had all the major issues dealt with on my A4 B8, but i still dont trust the car.
It’s a good platform, especially the car itself. everything is great once all the updates are done. Even some Toyota’s drink oil from bad pistons. I have been all over the Midwest and east coast even doing towing.
@@rizwanhaque9735 eventually I’ll get around to most everything but these 2.0t in the USA are 6 and 8 speed with a torque converter and don’t have many problems. I’ll do a transmission flush and filter change soon and I can talk about them maybe take some stuff apart
I’m going to cover all the stuff on this platform (mostly) before I move to other cars other audis and vw’s. If the channel grows enough I’ll get different cars to go all the way through but barely making it so far
@@NaptownTuner My timing chain failed on my A4 B8, and my Mechatronic failed with a fried TCM on my Golf Mk6. So i have had both luck with both cars, hopefully they will last a while so i can get my moneys worth out of them!
@@NaptownTuner would you happen to have a motor and if so where are you? Maybe I can get you to do a swap out for me. If not how about a cost to do a piston replacement job, 2012 Audi Q5 2.0
My schedule is all over the place. I don’t set alarms these days unless I’m going to church.. I should probably put myself on an actual schedule though! Need to take more advantage of all the daylight.
Is it an option to chop the top off of to the base-plate from the factory one? and make an smooth edge on the base-plate part that would mount to the housing ?
@@NaptownTuner I installed that 3" downpipe and been trying different spacers until I get a tune but I'm hesitant because I'm thinking about getting a rebuild/piston replacement done.
Everything is going wrong! Someone get a joint rolled! Lol I'd definitely smoke up with this guy. Don't know if I'd let him near my car, but definitely higher than a kite lol
Kitchen full of audi parts now thats a car guy !
Nothing like a nutritional breakfast with a starter, alternator, a TFSi head, piston and rings.. and 5 qts of syn Mobil 1 to wash it all down.. LOL you have that awesome palace of a shop and yet your kitchen is the place where turbie lives .. excellent video I like the sound of the ported exhaust flange 👍🏻
Eats breakfast in the garage.
I just put one in yesterday and I get +1.5MPG and slightly better performance out of the engine. The increase in sound is very slight for my though. Best $30 spent on a car, thank you!
Other parts I have noticed can be cheap while still being good are the turbo charge pipes. I got a whole set off ARM for a tad over 160$ and my buddy bought only the turbo pipe from ECS tuning and it costed him over 200$.
Looking at the two they are exactly the same, bends, welds, etc.. Except the paint on them.. I'm not looking to cheap out on parts but when I see stuff like that there's zero point in burning money away that could be put somewhere else lol
Great video thanks....That's showing real life ,
Dat was one bad muffler delete! But Naptown sure showed dat muffler delete who the daddy was!! What a bad-ass!! BTW, dat was real man's kitchen...no pots or pans, just engine part strewn all over!🤣
Haha dude your fuckin awesome I love how you explain every single step in a funny and understanding way.so I wanna say thank you very much for your really helpful video.
Love your channel bro‼️
And look at that bachelor pad‼️🤣🤣🤣🤣 no chick tell you to get that alternator off the counter or that rubber mallet out of the kitchen 😂😂😂😂
Keep up the great work dude ✌🏼
Piston ring video would be great, we'll be waiting :P
Is it possible to buy heat shield wrap and wrap around shaft where the slots are to seal it shut ?? Thanks
Just another day modding I see. Everything that can go wrong, will. 😂
This is actually the way i found out my turbo was replaced before, i wanted to buy a muffler delete but i checked out the turbo first and i was kind of confused that my turbo does not have those bolts there so i can't change that because that part is fused together with the rest of the turbo. It's a borgwarner one, i think is as good as the OEM and it does have an advantage, the wastegate actuator is adjustable so if it's just a little sloppy there you could tight the nut a little bit and wastegate will get a little bit tighter, that is what i did anyway.
Borgwarner is one of the best
I see you got 0w-40. Do you recommend that for the B8 2.0Ts?
What will happen if I weld it with aluminum n close all those opening infront n put it back?
Hey bro you seem like a solid dude an s straight shooter in all your videos where are you located? I've got a mk6 GTI I'm doing the head on now and am hoping to build or have a foraged internals motor put together, I do my own wrenching but I appreciate your info you been giving away in the videos lmk I'm in southern cali
I have that same turbo muffler delete and it's hella hard to put in.
My place is alike. Rebuilding a head on my coffee table toolbox on my kitchen counter.🤷♂️🤣
Max BHPPP safe power can be pushed on Stage 1? Audi a5 2.0 tfsi CDNB
That's a fuckin metal ass kitchen. Badass
Great video. I've got a video suggestion! I recently got a 2013 Audi Q5 and found out there were multiple recalls (fuel flange, heater something, and water pump). Could you go over what these were, the technical issues, show the old part's shortcomings (hopefully if you have them), the dealer installed/exchanged parts, and ultimately your thoughts whether these new parts will help. Thanks! Keep doing what you're doing for the community!
The fuel flange is like a piece of sticky rubber that just goes over the top of the fuel pump, the after run coolant pump I recently did a video on and the heater something I can’t remember what that might be.
Pay naptown does a noisy timing chain sound like a vacuum leak or a hissing coming from the very front of the engine near the timing chain cover.? I could tell it was replaced there was a hole drilled and the radiator support to get the one bolt out of the camshaft oil dipstick holder and it was broke farther down. And there's some kind of sealant on the top of the timing chain cover evidence that it was removed
Sounds like a vacuum leak you should probably have a lean fault you can hear the idle raise by spraying carb cleaner near the hissing sound but more accurate way of doing it is with a scan tool looking at fuel trims when you spray
Hey Man, I love watching your videos and I'm a tech too. I also own the Shitty Famous Audi A52.0tfsi CDNB Engine code. I had the piston rings problem and some other usual ones too, i solved everything out and also have done a full engine rebuild, valves, pistons, rings, bearings etc. i have ran my engine in for total 5k miles, its running smooth, no problems what so ever. Im looking to do a Stage 1 Remap. After engine rebuild im running as a estimated 200BHP. Stock power was 185BHP. i have a few mods, better coil packs, plugs and Custom Valved exhaust Catback that i made at work, vacuum controlled by boost using a secondary vacuum pump that i installed near the manifold so the valves open under boost. Anyways, Stage 1 qoutes are giving me 260-270BHP Estimated on dyno. I wanted to get some insight from you, im thinking a overall 60-90bhp increase from stock may cause damage to the engine. whats your option on the engines, i know they are good for power. I usually tell my customers that have other makes and models not to tune their cars for max power on stage 1. but theres many people pulling crazy numbers with the EA1888 Blocks and the CDNB, CDNC engine codes. Whats your thoughts on this? Would it be trust worthy and safe to run 260+ bhp on "stock internals" I Haven't got any further issues with the engine and have resolved everything
Highly entertaining 😂
Nice kitchen naptown im jealous bro
Ciao , video interessante !
Monta su 2.0 fsi turbo ea113 bwa?
1:01 Why TF you cant hold my hand on everything!? lol
Hey mr naptown I need your help! What diagnostic scanner would you suggest to buy for vag cars? Maybe an idea for a video in the future. I had a maxme from matco but it took a dump and I’m looking for a new one, I’m just curious on what the audi god has to say.
same. bidirectional also
OBD11 or Vagcom
I’m still using a retired factory scan tool that was gifted to me so vas pc old school but I have a Ross tech that I haven’t used yet
Thanks for the input guys!
I bought the same part, Followed the same process of "forcing" 😂😂 it worked but the breaking in was a little scary with acceleration just cutting in and out...stopped after 1 day..anyone think it was something else? also your kitchen is hilarious!!
I put it in one of my cars and never experienced that, it’s hard to tell a difference with it installed but I like the idea of a smooth pipe without the turbulence
Can you make a video where we can hear that turbo muffler delete noises?
You can hear it the best when it’s up hill with a load and accelerating. It doesn’t make that much of a difference in noise unless you’re paying attention with the window down, for that reason it’s hard to get on film. At the very end of this video I try to get the noise but like I said it works better up a hill with acceleration and I don’t really have any hills close to where I live.
ua-cam.com/video/vimABEhnb78/v-deo.html
Does this work on ko4
Other than diverter valve and muffler what other mods/upgrades are there for k03?
Not much after that maybe charge pipes downpipe and a stage 2 tune with a stage 2 clutch (or stage 1 just not stock)I wouldn’t recommend going to a stage 1 cuz the power gain from stage 2 is much more only spending a few hundred extra on the downpipe (stage 1 doesn’t really require it but it’s recommended so eh 🤷♂️) also front intercooler i got an intake and diverter valve and i already get crazy turbo spools i have a vid on my page if u wanna check it out 🫶🏻
What's your opinion on the made in china K04 turbos they sell on EBay?
It’s probably fine but I stay away from China parts as much as possible. A rule of thumb is, you need to buy parts from a reputable parts supplier and not off some Amazon or eBay store
the k03 i have doesnt have the bolts to remove the stock muffler, any idea how i can do this?
You can't, same problem here, your turbo was changed.
the muffler part is fused with the rest of the turbo and you can't remove it.
Couldnt you just jb weld those holes in the factory one ??
If you notice that updated piece had a two stage o-ring the top o-ring seals so it’s a smooth pipe all the way down. I don’t believe the factory muffler piece even reaches to the top. I did think about that as well though because I believe in jb weld enough that it wouldn’t fall or break out with the turbo heat but it’s still probably just a bad idea.
so im thinking about KO4 FROM STOCK KO3. JUST FOR THE TURBO NOISE IS THAT THE ONLY DIFFERENCE?
Definitely make more power with the bigger profile on the turbo wheel but it’s always a slight trade off for waiting for boost until a little further in the rpm range then it hits a little harder. For this reason I think it’s pointless to waist time and money for anything bigger than a k04. On a 2.0t 4 cylinder.
@@NaptownTuner FOR SURE. are ko4's less prone to have the whole wastegate failure? whats the going rate for a NAPTOWN TUNER 's EYE certified KO4? and if u have an extra pair of the NEPEX PLIERS ,that would be greatLY APPRECIATED! jk but not really
@@newacount1777 ya only the factory k03 ihi turbos do that with the junk bushing in the linkage that wears out and gets sloppy. K04 starts at $1500 that one I have that I haven’t installed yet I show in one of my videos, I paid $2300 it came with a down pipe and it’s a slightly better turbo made by borgwarner
getting a plastic hammer for my kitchen.
I don't have these screws... maybe I have a different turbo? B8 1.8 tfsi 2014
Same boat as you I believe we have updated k03’s
Does the turbo need to be removed to put that on?
No but it you get the cheap one you might need to force it in like I did.
Would you say the 2.0 tfsi is a reliable engine once the timing chain and oil consumption issues etc have been resolved? I have had all the major issues dealt with on my A4 B8, but i still dont trust the car.
It’s a good platform, especially the car itself. everything is great once all the updates are done. Even some Toyota’s drink oil from bad pistons. I have been all over the Midwest and east coast even doing towing.
@@NaptownTuner Could you make some vids on the S tronic and Dsg transmissions, or is it strictly engines only??
@@rizwanhaque9735 eventually I’ll get around to most everything but these 2.0t in the USA are 6 and 8 speed with a torque converter and don’t have many problems. I’ll do a transmission flush and filter change soon and I can talk about them maybe take some stuff apart
I’m going to cover all the stuff on this platform (mostly) before I move to other cars other audis and vw’s. If the channel grows enough I’ll get different cars to go all the way through but barely making it so far
@@NaptownTuner My timing chain failed on my A4 B8, and my Mechatronic failed with a fried TCM on my Golf Mk6. So i have had both luck with both cars, hopefully they will last a while so i can get my moneys worth out of them!
Looking for a good motor without the oil burning issue, can you assist me with that?
Where are you located
@@NaptownTuner Tennessee
@@NaptownTuner would you happen to have a motor and if so where are you? Maybe I can get you to do a swap out for me. If not how about a cost to do a piston replacement job, 2012 Audi Q5 2.0
5 am... getting up early or came home late? =)
My schedule is all over the place. I don’t set alarms these days unless I’m going to church.. I should probably put myself on an actual schedule though! Need to take more advantage of all the daylight.
8:07 Kids need hugs not drugs.
Is it an option to chop the top off of to the base-plate from the factory one? and make an smooth edge on the base-plate part that would mount to the housing ?
Bout to try that shit on my stock turbo tomorrow I'll let you know how she sounds if you want 🤙
@@smokeymcpot992 id love to hear it still had no time to try it myself
@@smokeymcpot992 And how dit it work out?
Any help with error code p013a?
Probably an oxygen sensor
@@NaptownTuner I installed that 3" downpipe and been trying different spacers until I get a tune but I'm hesitant because I'm thinking about getting a rebuild/piston replacement done.
Everything is going wrong! Someone get a joint rolled! Lol I'd definitely smoke up with this guy. Don't know if I'd let him near my car, but definitely higher than a kite lol
That your kitchen man? The woman must be pleased. I have synths and electronic parts everywhere. Must be a part of a reason why I got no woman
I haven’t looked for a woman in a while, just enjoying being single. They are all a wreck these days
@@NaptownTuner true words man
Your wife must love you for you to take over her place of house!
I don’t have to worry about that, the last gf I had pretty much made me realize I’m better off single, although it has its downfalls as well
Lol.. this is why you don't buy cheap parts
Why are you always so angry? Have you ever had a diagnosis? I think you might know a little to much about horrible VW motors.
Most of it is me just trying to be entertaining