Black PC Build | No RGB | Ryzen 7800X3D | RTX 4080 | Noctua NH-D15 | FSP Hydro PTM PRO | Samsung 990
Вставка
- Опубліковано 5 жов 2024
- Black PC Build 2023, No RGB, Ryzen 7800X3D, RTX 4080 Founder Edition,
Noctua NH-D15, FSP Hydro PTM PRO, Samsung 990 Pro, Meshify 2, NZXT N7 B650E
► Thanks to FSP for sending me a review sample. For more information visit: www.fsplifesty...
Hydro PTM PRO 1200W - PSU www.fsplifesty...
► Note:
Total cost of building this PC without the GPU is $1472
Nvidia Geforce RTX 4080 Founder Edition MSRP is $1200
If anyone has questions, please subscribe to my channel and write your questions on my video. Thanks.
► Parts list: (Amazon & Newegg Affiliate)
FSP Hydro PTM PRO 1200W amzn.to/3NHzjht
AMD Ryzen 7 7800x3d amzn.to/44mME68
Meshify 2 Black ATX Flexible Light Tinted Case amzn.to/3OfbWgV
Noctua NH-D15 chromax.Black amzn.to/3PQC4zE
Noctua NA-HC4 chromax.Black amzn.to/3XExvKR
Noctua NM-AMB12 AM5 Offset Mounting Bars amzn.to/44xOFfl
NZXT NZXT N7 B650E Motherboard amzn.to/3JQyEsO
G.SKILL Flare X5 32G 6000 Memory amzn.to/43hAQ3m
Samsung 990 PRO 1TB amzn.to/3NMmEcW
Nvidia Geforce RTX 4080 Founder Edition amzn.to/3pIxt7W
► Tool:
Xiaomi USB Cordless Electric Screwdriver amzn.to/3w5OauN
► Wall:
Art3d Textures 3D Wall Panels White amzn.to/36fhkNh
► Camera:
Samsung Galaxy S21 Ultra amzn.to/43LL3Xo
► Music:
----------------------------------------------------------------
Boundary - Anthony Palmer
Combat is Real - Damma Beatz
RESPECOGNIZE by Diamond Ortiz
----------------------------------------------------------------
겜임 컴퓨터 조립
#NoRGB #7800X3D #Noctua
no RGB build = best build
exactly man !!!!!
Макул
No glass case = best of the best build ❤
Really
Agree fully
Beautiful build and ALMOST affordable.
Would have loved to have you throw in just little on screen messages with the cables you were hooking up. I've only built a couple PC's and getting ready to do another one, it's been over a decade, and the extra bit of guidance would have been great!
Love the build!!
Nice build! I love it, FSP makes some great power supplies. I installed the Hydro G Pro in mine recently
these look awesome! I am not a RGB fan but in my current system ( 11900k, 3080ti 32gb ram ) its all white parts with RGB fans SET TO STATIC WHITE. The white colour on a black Lian Li 011D with all White parts looks amazing.
Finally, a pc build has no childish look. ❤
Those NZXT AMD boards are gorgeous. Pretty sure they are basically ASRock Steel Legends. I almost got a B550 NZXT buts instead got a Taichi X570.
Beautiful case, and clean look.
Have absolutely zero idea what cords are connecting to what and why! Incredibly informative!
so CLEAN
Nice clean build! In all honesty though dissapointed to see such temp results as 85.8 degrees for a monster cooler like Noctua NH-D15. And I presume based on the result from Cinebench (16940 pts) that you have limited it by the temp around 86 degrees or by the power limit around 80W.
I've just tested it on my system with Ryzen 7 7800x3d and 4x times cheaper cooler ID-Cooling SE-214-XT 85C and 85W limit - got 17269 pts and 85.9C max temp, while around 17674 pts with 89.9C (94C temp limit and 89W power limit). In games it's like 60-70 degrees. Kind of considered a possible upgrade to Noctua NH-D15 but if it's not a mistake, then there's clearly no point to pay considerably more in this case.
Temperature would be a lot better if I used a different GPU. The founder edition rear fan is blowing hot air directly to the CPU fan.
No RGB .. You the Man .
Babe wake up!! Pc Technician uploaded another pc build with no RGB! And it's black aswell!!💦
The music choice, the bass!🔥🔥
Aaaaah as a PC builder this indeed pleases me
Just got the Ryzen 7 7800x3d, my 4080 FE comes in Friday 😭 excited to build it
this is art.
Need more non-gaming aesthetics pc parts!!! Just plain and simple.
Impresiv!! noRGB
simple and elegant. Screw RGB :)
Clean AF
Nice clean build👍
hey i was copying this build i was wondering if u could show a better look of we're all the case and fan cables plug into
Another beautiful build
Insane that the d15 is still being used in 2023
Cool build though the 1200W PSU seems overkill for the parts used in this build. A 1000W or even a 850W 80+ Gold Rated PSU would have probably been just fine to run this.
Yes, even 850W works fine here. I like to use more power because it's better to run a higher wattage at half capacity than a lower wattage unit at full capacity. A PSU that runs at 85% efficiency will use less electricity (and dissipate less heat) than one that runs at 75% efficiency.
98😮
78 be?
😊😅😅😅😅😅😊😅😅🎉😢😂😂🎉😂
Ni🎉😅😂😂😂❤H on@@PCTechnician
Do you think this exact setup would be a good fit for a 7950x3d and a 7900xtx? Or should a different cooler be used? Additional fans? Love the aesthetic!
This setup will be very good with 7950x3d & 7900xtx too. Noctua is good as AIO.
Glad to see another upload! love the matte black
Ah, just what I was looking for! I have been considering switching back to my NH-D15 from a 360MM AIO liquid cooler for my 7800X3D - but I wanted to see some temps with the NH-D15 first as my AIO seems to have my CPU often hitting 80-83° (with it configured in the BIOS to always run at full power in DC mode). So I figured that the NH-D15 would have it sitting at that temperature range for a much lengthier period of time lol.
So, while I might still switch back to the NH-D15, I would simply have to get used to not being able to see my all white, non-RGB part setup if I do... Idk if I should be happy or sad about the tradeoff lmaoo.
Side note, but I just got and installed the 1000W FSP Hydro Ti Pro yesterday! It's good to see others using their OP power supplies!
Kudos!
which AIO were you using? because i'm upgrading to a 7800x3d and i'm contemplating wether i should get a 360mm AIO or the nh d15
@nebukadnezar7519 I believe that the AIO I was using was the Lumen S36. But, I have switched back to my NH-D15 (along with a ThermalGrizzly CPU cooling pad) since making that comment, and I haven't had any issues! Things have also been moving a bit smoother for AMD's 7000 series CPUs (finally) with the BIOS updates that rolled out last week.
@@NippleSauce what kind of case are you using? I'm using a fractal design pop xl silent and i'm wondering if that would pair well with a 360mm AIO on the front of the case
@nebukadnezar7519 I'm using the Fractal Design Torrent as my current case. It has the same 360mm compatibility in the front, along with 3x140mm fans across the bottom.
In all honesty, the NH-D15 just works so much more effectively with my setup. Since my case - and possibly yours too - has such great air intake, the D15 keeps the CPU super cool. Just note that you may have to customize your fan curves in the BIOS for this to work effectively.
@@NippleSauce that’s the problem with my case, since it’s a silent case it has very poor air intake, only a small gap on one side which is why I am on the fence between the nh-d15 and a 360mm AIO but I don’t know which would work better with the small amount of air available
2700 just for my satisfaction Most of is are too poor for that.But it's beautiful.
An all white build or non-black build in general is a lot more difficult these days. The default is apparently a black case with all-black internals, a glass window and tons of LEDs. This applies to 99% of all avilable components, even standoffs are usually black. I don't get what people like about that, I open a black case with all black components, I can hardly see anything, like where that black screw has fallen on that black board in this black case with the black power supply. Try to build a white workstation without that stupid glass window, I couldn't even find a case for that. Imagine you enter an office and everbody has computer on their desk with a glass window and tons of blinking stuff in all rainbow colors in it. How annoying!
@ 2:52 you've got enough thermal paste to do three cpu mounts, at least. Waaay too much. Should be a paper thin layer spread thin.
Too much thermal pastes can cause past flow and messy but thermal pastes are electrically non-conductive. You only going to have problem with tiny paste. Check out the gamersnexus article. bit.ly/3kNyPrf
@@PCTechnician just because you can, doesn't mean you should
Did you even read the article? you don't need to argue with me. Simply google it yourself about the thermal paste amount. This topic has been talked about over many years.
@@PCTechnician I'm not arguing. Just saying it is too much. Just because it doesn't hurt anything doesn't mean it's not too much. It works though I admit. Just makes unnecessary mess and wastes paste as long as it's not conductive.
It looks good except I think you should have gone with some cable extensions, I see that as the only eye sore in my opinion. 👍
The problem with these FE cards is that hot air is directly blown into the heatsink fan. Temps will be bad in this build.
Please build a full Black budget pc build with ryzen 5 5600g
Great build. I have almost the same build, now I just need to buy 4080 to complete it.
The one think that I'm worried about is how "tall" the GPU can be to don't have forces / pressure applied by the side panel to the GPU power connector cable (you know, the recent reports of melting / fire caused by that)
Can you say if the side panel is pressuring the cable in your build? How much is the gap between the side panel and GPU? (manufacters state that 4.0-4.5 cm is safe)
Meshify 2 case is 1inch+ wider than most mid-ATX cases so there are no issues with GPU power cable. Take a look at this clip 8:01
@@PCTechnician wow, how did I missed this shot? Thanks. Looks like the side panel doesn't even touch the cable. That's more than fortunate, because the card I want to buy (PNY 4080) is exactly the same width as FE (137mm). Great, thanks a lot
I was thinking about doing the same build but using bigger case meshify 2 xl and rog strix x670 e-e. I was wondering if i should add all 9extra fans that this case allows as well. My psu would be the thor platinum 1000w and 4080super from tuf.
Nice build. It’s pretty much the one I’m going to build soon. Do you still have it assembled?
How tall ist the 4080 and how much space do you have for the side panel? I’m concerned the GPU Power cable won’t fit properly and gets bent with the side panel closed.
Meshify 2 case is 1inch+ wider than most mid-ATX cases so there are no issues with GPU power cable. Take a look at this clip 8:01
Hey im about to get a similar build but how did u fit the d15 with g. Skill flare??? I thought the ram clearance of the cooler was 32mm and the g skill is like 33-34mm ?
No problems at all. 3:08
Very likely my next buiid. Was planning a complete blackout.
Very nice! Did you notice any performance increase/lower cpu temps using the offset bracket with the NH-D15?
I haven't compared the two but according to the Noctua website, temperatures have reduced by 1-3C.
@@PCTechnician Thanks, also noticed you were using the G.Skill Flare ram and wondering if you had any issues with the cooler clearance with the right fan mounted above?
@@therealbdbeatz Not at all as G.Skill is low profile ram
How is temperature without PBO with this cooler ? I have problem with temps with my 7800X3d.Nice build :) !
Everything was on default. I couldn't remember if PBO is enabled or not
It screams for custom power cables 😅 looks solid though.
I like it, although I prefer a mb with 4 M.2 slots. Options?
clean
Does anyone have any Ram Dimensions/Kits that allow the front cpu fan to be level with the center postition fan other than the one used in the video?
Sensational
Nice
Can you build a full asus tuf pc with aio cooler
Hi. Did you flash the bios before adding the CPU? Or it works out of the box? I've seen posts on reddit that you need to flash the bios before adding the 7800x3d into this motherboard (NZXT b650e).Thanks!
The CPU works out the box
I am massively interested in this as I'm about to purchase a system with your referred components, and can't help but notice that the video didn't show you removing the coldplate protection. I mean no offense, but could it be the reason why your 7800X3D going as high as 85c on a powerful NH D-15? Or is it safe to say that I should use an AIO on this CPU? Thank you, your expertise is appreciated.
Copper plastic was removed. The temperature will be a lot better if you use a different GPU because RTX 4080 FE is blowing hot air to the CPU. Max 85c here is pretty normal here. And Noctua is good as AIO.
bruh if the coldplate protection is still on the cpu would jump to 100c+ right at the moment it has to do some heavy work, and NH D-15 is not that powerful, it gives better temp than other air coolers like 1-2c max and it will be beaten badly by some decent aio
It would have been an price/perf. build with RX 7900XTX
Hurt to see an RTX 4080 :(
Both have the same price lmao
@@cg79h3b RX 7900XTX Starts for $900 whereas RTX 4080 starts for $1100 .
A $200 difference !
Ryzen 7800X3D Noctua NH-U9S is good?
I would recommend NH-D15 or NH-U12A for 7800X3D
Cinebench R23 scores are way too low, my 7745HX laptop gets 1800/18000 something.
Is it necessary to add one more intake 140 fan at the front or two 140 intake fans are adaquate ? Thanks.
This case come with two front fans(140mm) and one rear(140mm). I would add 140mm on top to make neutral air flow.
@@PCTechnician Thanks a lot. I'm gonna realize the same build.
Hello, I am looking at getting this mobo and cpu. Did the cpu work out of the box? Or did you have to flash the bios. How would you flash the bios if you only have the x3d? Thanks for your reply if you do!
CPU works out of box. You can update the bios afterward.
Did you turn of PBO? Your score and temps seems that way on cinebench
Everything is on default setting
Which motherboard is that? The N7-B65XT-B1 or the N7-B65XT-W1
N7-B65XT-B1
1200 wat 80+ plat? you got sent that right?
i like the look of the d15 more then the u12a, but this d15 covers the ram. what option should i go for?
There isn't an option for D15. You have to use low profile rams.
What’s your cpu (tctl/tdie) idle temps like? I’ve got the same 7800X3D and NH-D15 and mine hovers around 50C at idle
42C
@@PCTechnician damn what am I doing wrong 😖
@@HazzyDevil Mine is howering around 47c @ 38W idle and cinebench R23 around 86-88c @ 97W ambient 23c.
Why would anyone put the fan on top of the case while using Noctua cooler in horizontal direction?
What other GPU would you use for around 500--800$ on this build?
Check out the link benchmarks.ul.com/compare/best-gpus?amount=0&sortBy=SCORE&reverseOrder=true&types=DESKTOP&minRating=0
do the case come with fans? if no, how many should I get at minimum?
3:22 Come with two front fans and one rear. I just added one more on top.
@@PCTechnician thank you!
Hi, please is noctua NH-D15 good for 7800x3d ?
Someone told me not to get it and get corsair 150i\170i instead of it
What do you advise ?
If the NH-D15 good and enough and cool the 7800x3d very good.. i might get it
Yes. In my opinion, Noctua is the best air cooler for 7800x3d.
@@PCTechnician
Thanks, which one is better to chose .. Noctua NH-D15 Chromax 140mm Premium Dual Tower CPU Air Cooler or NOCTUA NH-U12A Premium ?
Would this pc build work with a rtx 4080 by zotac by any chance? and a 850watt evga platinum psu? (supernova 850 p2 and zotac amp airo)
Yes, no problems
@@PCTechnician Thank you very much! I am close to getting enough money to get my build, and this is perfect!
Where did you get that electric screwdriver
Xiaomi USB Cordless Electric Screwdriver amzn.to/3w5OauN
Does the cristal fit?
your used the xl meshify 2 right?
No. Meshify 2.
Hello is there any problem that the video card is very close to the processor??
Not at all
hey i am making a build similar to yours, may i ask some questions?
The Intel backplate, it scared me for a second because i swore i saw it in someons build-prob an intel one lmao, but i'm still scared that i need it but i probably am delirious. I a working with a corsair 5000d case, b650 tomahawk am5 mb, ryzen 7950 amd chip.
How much is the total price???
Check out the description for price and detailed information
Why "Microsoft Basic Display Adapter", update your drivers before running those benchmarks 🤦♂
Will Noctua NH-D15 be enough to cool i9 13900K ?
Yes I would definitely use Noctua
@@PCTechnician Thank you.
Can I change the GPU with a RX 6900XT?
Yes
(32x2)gb 64gb operative 5drr if I do something will be damaged?
No. 64GB will be fine
@@PCTechnician Should I buy rtx 3080 ti or 3090 ti or 4070?
@@PCTechnician thanks
OR WHAT THE TEMP normal usage
Check out cinebench & furmark temps at the end of the video
Pc gamer with negative FPS bc the lack of RGB 😢 /jk
good set of components ... apart from ... :( ... the AMD platform