Watched and followed along on the series. If it weren't for low rang off road making these videos, I wouldn't have bought a samurai for $400 with a blown engine... a donor engine for $60 and ended up rebuilding it all myself. You guys gave me the confidence and courage to undertake the project. Thank you!
Very good series, I watched them all in a row they were so good. My old car which I still keep for occasional use has similar engine. This is G13A while mine has G10B.
+Mohd. Hashim Khan So didI! excellent series. I have a cast iron SJ410 block, 'learnt a lot thanks! Just one thing, I'd of used a small Dewalt 12v cordless driver in lieu of the nut driver though :-)
+Mike Edwards i mean yeah, but the g10b engine it's the one you can find in a suzuki alto, the code name for the Alto it's sh410 , I know about the samurai. Thanks anyways
After snugging the bolts down you'd get a good sitting if you Titan it to spec in increments. let's say for example he's going to 3 lb.. which isn't a lot but in other cases it could be bigger number snug them down after in increments of 1 lb till reaching 3 it'll give you a real even and flush sitting... 🤔 Well I think three would suck just go to three.. lol I could be wrong .. but it works for me I strip less bolts like that 😩
Hello in video 7 the valve setting according to manual in PMS is 1-2-5-7 and then 3-4-6-8 ¡¡because in this video it is 3-4-6-8 and then 1-2 -5-7 ?????
Watched and followed along on the series. If it weren't for low rang off road making these videos, I wouldn't have bought a samurai for $400 with a blown engine... a donor engine for $60 and ended up rebuilding it all myself. You guys gave me the confidence and courage to undertake the project. Thank you!
Aaron Raufman was it sucsessful? i kinda want to give it a try
Awesome series, just finished watching them all. Thanks for the upload!
Very good series, I watched them all in a row they were so good. My old car which I still keep for occasional use has similar engine. This is G13A while mine has G10B.
+Mohd. Hashim Khan Thanks for watching!!
+Mohd. Hashim Khan So didI! excellent series. I have a cast iron SJ410 block, 'learnt a lot thanks! Just one thing, I'd of used a small Dewalt 12v cordless driver in lieu of the nut driver though :-)
It is a suzuki alto??
+Rodrigo Cossio No, a 1987 SJ410
+Mike Edwards i mean yeah, but the g10b engine it's the one you can find in a suzuki alto, the code name for the Alto it's sh410 , I know about the samurai. Thanks anyways
Thanks again guys good video quality,representation and awesome mechanic from low range keep it up im impressed 👌
Beautiful series. I learned a lot from your step by step, simple to understand approach. Looking forward to more videos from you. Cheers
ESOS MECÁNICOS SON TAN LIMPIOS, EN PERÚ ES MUY DIFERENTE, BUEN VIDEO!
Thanks for uploading these videos, awesome series! Watched them all and learned a lot.
You are welcome. Thanks for viewing and commenting.
@@lowrangeoffroad1 i need support for g14a engine. Can u plz share yr email address?
What a great series of videos. Many Thanks. Regards Bondy.
Glad you enjoyed it. Thanks for watching and commenting1
Great series learned a lot thanks much!
Could you do a video about the ignition timing ?
1. Should i replace my direct fan with electric motorized fan with temperature on/off option?
I watched the entire series thinking this was a motorcycle engine haha.
perfect video. Thanks.
After snugging the bolts down you'd get a good sitting if you Titan it to spec in increments. let's say for example he's going to 3 lb.. which isn't a lot but in other cases it could be bigger number snug them down after in increments of 1 lb till reaching 3 it'll give you a real even and flush sitting... 🤔 Well I think three would suck just go to three.. lol I could be wrong .. but it works for me I strip less bolts like that 😩
Hello in video 7 the valve setting according to manual in PMS is 1-2-5-7 and then 3-4-6-8 ¡¡because in this video it is 3-4-6-8 and then 1-2 -5-7 ?????
perfect idea. thanks
Where to get that torque wrench
Where is tempersture sensor?
How to install and set timing for distributor?
00:57 the cover is dirty from inside 🤔
No rest running
where is part 10?
lleva silicone ???
Toyota duet
I have a problem
Good for you.