Це відео не доступне.
Перепрошуємо.
Evinrude ETEC Spark Plug Change & Plug Indexing Instructions / 3 Year 300 Hour Service
Вставка
- Опубліковано 9 вер 2021
- Step by step instructions on how to change your spark plugs on the Evinrude ETEC outboard motor. Save yourself time and money by doing this simple outboard motor maintenance yourself.
Always verify part numbers for your particular outboard motor model. 3 Year 300 Hour Service
amzn.to/4cCujGF - E-Tec HPF Pro Gearcase Lube
amzn.to/3VMX6lW - Marine Lower Unit Fill Pump (Quart)
amzn.to/4aDyxvR - XPS Marine XD100 E-TEC Oil
amzn.to/3TIlx0Z - USB Diagnostic Tool Scanner KIT for EVINRUDE Outboard Engine E-TEC
amzn.to/3U2Xv21 - Champion Iridium 9005 Spark Plug - QC10WEP
amzn.to/3JbyETr - OEM BRP Evinrude Triple-Guard Marine Grease 14 oz
amzn.to/3xkRjK2 - Power Tilt & Trim Fluid
^Above are Affiliate Links^
ETEC 150
Model: DBCXMO158222
Spark Plug: Champion 9005 (QC10WEP)
Spark Plug Gap: .0028 In (+-) .003 In
Spark Plug Torque: 15 ftlb (Up to 30 ftlb)
Thanks for the video, Paul. Since I've changed the plugs and fuel filter on my ETEC 40, it's idling so smoothly and the gas mileage has increased remarkably.
Good to hear... and glad this video helped
Thanks for the video, the drama I read on various blogs can scare the hell out of a lot people.
Just gotta take your time
Dude thank you 🙏
I was always scared to work on my engine hearing that they are super tech sensitive and what not but watching your videos is giving confidence to start. Thank you 🙏
I subscribe off this one brotha
Glad these can help, us ETEC owners have to stick together
Tech tip I have seen the spark follow the marker line, I make a very short line on the top of the insulator and use die electric grease to insulator it
Goof tip...I have heard of this happening in a few cases, but can't remember the specifics...like insulation or marker type contributing.
Thanks dude perfect for an none mechanic like me to do stuff like this myself!
Glad I could help, pretty easy job...so save yourself some money for bait :)
It is really very helpful and useful tutorial. Thank you for sharing. 💞💞💞
Thank you so much 😊
Don't have a boat yet like that but still had to watch and give you a like my friend!
Much appreciated...now I need to get out a do some fishing, but finding time has been rough
@@1Cast1Fish ya man I have had the same problem with all this crazy covid crap and how messed up my sons school is I have not had much time to fish ever since all this crap started!
FYI...If you are applying grease to threads, you are increasing torque value dramatically above 15 or 30lbs. That's fact and a risky move...must use 14mm plug shims if you can't achieve proper index after musical plugs or 30lbs dry thread. Cheers !
The shims will cause more problems than greasing the threads. Don't add shims, find plugs that index correctly.
Good stuff, I love my Evinrude. Too bad they quit making them.
I love mine to, and no real issues...much more reliable and cheaper to operate than the Merc Optimax I had on my old boat.
Thanks for the great video my friend 👍
Thank you
This is good, but I do not know what the injector pin is or what it looks like.
at 3:59, you can see it is facing the injector...I also use the small looking dot directly across that you can see between 2 bolts as a reference.
@@1Cast1Fish /Thank you. I will look in the morning and let you know. I have a 75 etcch motor, 3 cylinder. Thanks again.
For starbord mounting side it s very clear and the indexation is shown. But for the port side indexation is not shown, we easily undestand that spark oplu should be oriented to the injectors (tolerence zone)
Should be the same on both sides
Keep it going. 💓💕💞
Thank you
Hi Kevin. Great video man!!
Could you please make a video on where and how to change the sacrificial anodes that are inside and on the motor.
Thank you!
I want to help my etech last forever 😁 it is an awesome work horse.
I have not made a video on that, however they should be replaced if they start to show signs of wear....normally they are just bolted on and easy to remove and replace.
Thanks , I still have one year until the 3 year maintenance, but I'll be doing it myself now that I watched your videos, have you done a video for every 3 yr maintenance?
A lot of the basic maintenance is pretty easy IMO, I have not done a video on everything though.
I have a 40hp etec runs terrible at low speed 3mph to 8mph " missing, chugging. Idle seam good, top end is good , had champion plugs switched to nkg iridium plugs the situation got worse ! Would you think e3 plugs might correct this ? An authorized evenrude mechanic did the 3 yrs service and switched out plugs an said he did all the necessary work?? But it runs like crap at low speed ......charged me arm and a 🦵 .... Help !!!!!
Wish I could help, but I am by no means a pro, and it's sounds like it would be tough to diagnose the issue without seeing it. I would check to be sure all the spark plug wires are attached securely, also check the indexing on the plugs.
I don't understand, if it has 4 cylinders what position the spark plug should be in, I have an Envirude e-tech 115
Should be the same orientation with the injector as on the 6.
Hello. We changed the e tech 25 hp petrol pump. but everything works normally, the energy comes, the pump works, but the engine does not start by gurgling.. we spray the cylinders with lining spray. Hello..
Honestly not sure what the issue may be, but maybe fuel related
@@1Cast1Fish Is the fuel pump relay not in the ecu? The ecu has been tested in another engine and it is valid. Is there a contact in another contact place?.. Can you tell me which ends of the ecu's 12 volt input socket?. I wonder if I have a short circuit in the 12 volt energy entering the ecu, I'm asking to measure..ecu is solid, no problem..
Wish I could help more, but honestly, this one may be over my level of expertise. Do you have the service and maintenance manual? Might be time for a shop visit.
who else got a sick feeling a cringed when he was torqueing the first sparkplug.........BWHAHAHH!!
Hey! What would be the safest way to do a compression test on a 05 etec 90hp
I mean with out damage any electronics, thanks
There are multiple steps in performing a compression test, It would be difficult to put the whole process here and be 100% you understand.....Honestly I would look up other videos or take it to a qualified mechanic...I would love to help the best I can, but don't want to give bad advice or miss something since I do not have a 05 95hp.
If it doesn’t line up you can also torque up to 30lbs
Yep, I always have at least one thats a pain
I didn’t see where the fire point on the block can you show me please
Watch at 4:00 see the small silver dot near the plug....thats it
@@1Cast1Fish The line is facing directly away from the silver dot.
So what is a good way to clean out the arteries that the water goes through is clogged???
Use the flush port on the motor, there are also videos of disassembling the water lines while flushing to find the plugged spots. I however have never done this
@1Cast1Fish ok thanks. I got all the stuff out of the hoses. Now, it pisses water good but not at idle speed at all. What do u think I should do now???
Mine does not flow a ton at idle speed either. Is it overheating?
@1Cast1Fish what does it do if it overheats. ? How will I know if/when it overheats.?
@1Cast1Fish it's a 1989 60hp amd I don't have the money for a new one but I'm willing to do anything to get it going so I can fish with it.
The triple guard grease should only be applied to the gasket of the spark plug, not the threads!!
Where is the injector pin on the motor pl
Watch at 4:00 see the small silver dot near the plug....thats it
22 ft lbs MAX. 30 ft lbs in older manuals is wrong. Grease also effects torque
How do you know when it’s lined up to the air intake? I don’t get that part. Thanks
I meant lined up to the air and fuel mixture.
There is a small indent there...its noticeable if you look close at about 3:01 its kinda silver looking just above the bolt head
where is the indexing pin on the head?
about the 3 min mark, look across from my black line on the plug you can see the indent
@@1Cast1Fish Thank you very much, i see it now!
2-cyl e-tec. Bought 5 spark plugs, only one fits to another cylinder. This is so stupid.
Dang thats really bad luck with them, sometimes they get real close given a fair amount of play with the torque specs. I usually buy 2 times as many just in case. You can also buy indexing washers, but I remember reading they are not recommended somewhere...but honestly can't remember who or where I heard that from. Might be worth checking with Evinrude and trying.
Take a wrench and turn it counter clock wise…..😂
Righty tighty lefty loosie :)