There is a temp sensor there below the upper radiator hose on the thermostat housing that shorts out and causes that short circuit in the shutoff solenoid system. It's very common on those tractors. If you unplug the sensor and replace the fuse it will run fine.
Every time I watch you in the mud rain and snow it brings back bad memories to me of working in those conditions. I can feel the effects while I watch. Keep going Warren.
Hey Warren, some great troubleshooting there on those jobs. The only thing I might have done differently is push the tractor a little farther in the shelter so you wouldn’t have to lay in the mud. Cute puppy you got there. He must miss being right next to you. Thanks much for the Sunday video. Much appreciated!
Oh no... as soon as you said "reman" I knew exactly which tractor that is. I remember you had to get your wife to pull you back to the shop. Man, I'll take that old iron over today's junk (specially JD junk). Warren, my JD4710 compact utility is gravity feed and made roughly the same year as that 5410 is, I believe the 6000 models and higher may have the lift pump, can't say for sure though. I was going to say, fuses should be directly underneath the steering wheel, they are on my 4710. I said, I believe 6000 models and up, they changed things. Sure can hear that Yanmar engine run though... Great video as always, cheers :)
Hi Warren, another great video. We have a fleet of Deere 5620's No transfer pumps on them , they rely on the vane pump on the injection pump to pull fuel, the cab models came with an electric transfer pump. And yes it's a dumb idea.
Awesome job. Tough working conditions. Hey Warren, when corporate put the pressure or whatever they did to my once favorite stand alone John Deere dealer, he committed suicide. I hate saying much about it as that is horrible. A multi dealer corporation took over and it was just not good from then on. All the former employees lost their jobs permanently. They lost me as a longtime customer.
Same thing here, they have monopolized their tractor sales because they eliminated dealer competition, and they have tried to monopolize their service with their proprietary approach to software on their newer tractors. I personally hope they go broke.
The 5-10 series are notorious for the ect sensor killing the tractor. Have done several that the tractor was parked running fine then would no start. I usually unplug those right off and see on a crank no start issue
That is just sad about that 9620T, really shows the mess we are in, can’t even get a good reman engine, anyone thinking about going with a reman should watch the 9620T series, Look forward to the rebuild, Thanks for sharing 👍
@@rogerjohnson6218 Yep I should have paid more attention to the original comment. What a shitshow that repair turned into through no fault of Warren. I hope deere learned a lesson there.
The pup is too cute and the dogs are too. I confer that the dogs are more important than people. Well done tracing that problem under that greasy mess.
Trust me buddy I have noticed in my older age I tend to try to find easy way .but other day sucked had to install a heating system under house and retrofit duct work believe it or not works awsome I'm still hurting from being in small sardines area 😂
Great video Warren really enjoy watching you work on your service calls. Figuring out the troubles on the drilling rig and getting it off the road. The electrical gremlins on the 5410 JD. Thanks for sharing stay safe Warren.
As I work on drill rigs of all types and been a long time viewer it’s nice seeing a video of you working on one ! Thanks for all the videos Warren as always
Too bad about the Deere Engine. It will be interesting to see what went wrong with it. Pretty cool old drill rig. Hooch is a cute little pup. We had a litter of Black Lab Pups back in 2005. We had a hard time getting rid of them, so they went to a few friends. We were able to watch them grow old and become awesome dogs. One of my friends was going through some tough times and the dog was exactly what he needed and she turned out to be a great dog. Glad you were able to spend some time with your son. Thanks a bunch for the videos, really appreciate them.
Looks like Warren has another doggie to ride shotgun with him. Has he still got Duke? or is Duke too old to ride about with him. Warren has a heart of gold as far as doggies are concerned, people not so much, LoL. Warren is an all round good guy.
@@westerntruckandtractorrepa1353 Bless him, he always comes across as a chilled dog, but I bet he's always looking after the people in the house. What breed of doggie is your new copilot?
O heck Warren . I do remember all the trouble you had with that 9620T .one reman engine after another .if I remember correctly they tried to blame you and where supposed to be there when you did the last engine. So if you are going to do the engine rebuild then it will be fine. Nice bit of fault finding there 👍👍👍
It’s usually not the coil, it’s the temp sensor in the water manifold just above the pump. Unplug it and the fuse will hold. That 5410 obviously hasn’t been washed enough to screw up the fuse holders yet. Clean tractors on a farm have corroded fuses! 20 series was the same but on the 25 series the geniuses moved the fuse panel down in front of the rear axle by your left heel! There will be so much crap and mud packed around it, you’ll have to dig for it! Needed to have the fuses under the hood where engine heat will keep them dry! Got a 5420 with over 9000 hours still.
Juan deere…. Fuckin funny man. Perfect. Chinese and Mexican junk is killing everything . I work in construction, and the influence of garbage is strong from top to bottom and sideways. Has me screaming,spitting,and cussing everyday
Where i worked we had 3 cat forklifts with 3208 man they run hard just change oil and fuel filters often ran them very hard we screamed the hell out of them but when a 3208 grenades wow it sure makes a mess
I have a 5410 and think it is gravity fed. I know when you change the fuel filter you better have the tank full or it is impossible to get the air out and reprimed.
This engine is a squealing squeaker or is it a squeaking squealer? 😂 Best from Thomas in good ol' Germany. Hey, at least it runs in contrast to the Juanita Deere reman junk.
Oh, I got a JD-5410 and that sum-b#>-×h is broken again...Only starts on a jump box & there's no da>m front bucket locks, Scoopin up manure is all it can do, stinks & smells like poo poo.....I'm here all week....
Man that pile of junk 9620T needs an engine again? Wow, just goes to show the lack of quality workmanship in remanufactured engines. If that's the same tractor you put at least 2 engines in before I remember how much trouble it gave you. The engines you rebuild seem to hold up, but that's because of your attention to detail and making sure everything is done right. I feel bad for the owner of that 9620T. Sounds like it's cost him a small fortune.
Always a good Sunday with a video from Warren, cheers!
There is a temp sensor there below the upper radiator hose on the thermostat housing that shorts out and causes that short circuit in the shutoff solenoid system. It's very common on those tractors. If you unplug the sensor and replace the fuse it will run fine.
Every time I watch you in the mud rain and snow it brings back bad memories to me of working in those conditions. I can feel the effects while I watch. Keep going Warren.
Hey Warren, some great troubleshooting there on those jobs. The only thing I might have done differently is push the tractor a little farther in the shelter so you wouldn’t have to lay in the mud. Cute puppy you got there. He must miss being right next to you. Thanks much for the Sunday video. Much appreciated!
Front end loader and box blade were down.
Man you really gotta love what you do to work on dirty oil and dirt soaked shit like that day in day out
I think it's better than working in a room full of "personality,s"
Absolutely I’m a plumber/gasfitter and prefer working on my own without to many chimps around me
@@butchphillips873 under statement. :)
Hi warren i just love your field repair videos. The best on you tube.
Oh no... as soon as you said "reman" I knew exactly which tractor that is. I remember you had to get your wife to pull you back to the shop.
Man, I'll take that old iron over today's junk (specially JD junk).
Warren, my JD4710 compact utility is gravity feed and made roughly the same year as that 5410 is, I believe the 6000 models and higher may have the lift pump, can't say for sure though. I was going to say, fuses should be directly underneath the steering wheel, they are on my 4710. I said, I believe 6000 models and up, they changed things. Sure can hear that Yanmar engine run though... Great video as always, cheers :)
Thanks Warren for the video. Glad you had a good time out by the old mines. That does sound like fun!
i really like your videos you seam like a very honest and strait forward person good job
.
Hi Warren, another great video. We have a fleet of Deere 5620's No transfer pumps on them , they rely on the vane pump on the injection pump to pull fuel, the cab models came with an electric transfer pump. And yes it's a dumb idea.
PETE, nice looking job, keep up the good work, nice to see you plowing the fields like we use to. 😊😊😊
Hello Warren dogs to me are my world as well
Thanks again for another great video
Always a joy to watch
Regards
Another head scratcher eh,
Thanks for sharing Warren,safe travels bud
Good work Warren! Happy Thanksgiving! Wish you and the family the best!!
Thanks for the video Warren, enjoyed watching. Nice job of troubleshooting problems, appreciate your work and time.
Thanks for sharing Your content whenever You are able Warren.
Best Wishes to You, Your Family and Friends.
#HappyThanksgiving
Great video! Happy Thanksgiving to you and the family!
i love old equipment
Warren, the Temp Sensor failure is a common problem on those JD tractors.
Awesome video thanks for your time and consideration top job 🔧🛠️🚛🚜
Awesome job. Tough working conditions. Hey Warren, when corporate put the pressure or whatever they did to my once favorite stand alone John Deere dealer, he committed suicide. I hate saying much about it as that is horrible. A multi dealer corporation took over and it was just not good from then on. All the former employees lost their jobs permanently. They lost me as a longtime customer.
Same thing here, they have monopolized their tractor sales because they eliminated dealer competition, and they have tried to monopolize their service with their proprietary approach to software on their newer tractors. I personally hope they go broke.
Hey Warren. Kindest regards,Bill 🇨🇦🇨🇦
Warren, when I see you working in those weather conditions I have to put on a sweat shirt and I'm IN my house!
Hail rain or shine you look after your customers good for you
Your type of work Warren means you'll never suffer dementia.
That's good
The 5-10 series are notorious for the ect sensor killing the tractor. Have done several that the tractor was parked running fine then would no start. I usually unplug those right off and see on a crank no start issue
Not too many of those around here, usually a 6 series is the smallest I see.
@ there are a lot of just individuals here in south ga with just a few cows and maybe a small hay operation and the 5 series are pretty popular
That is just sad about that 9620T, really shows the mess we are in, can’t even get a good reman engine, anyone thinking about going with a reman should watch the 9620T series, Look forward to the rebuild, Thanks for sharing 👍
Everything made after 2020 is complete trash! From engines to batteries!
A few years back Warren put a reman engine in a (maybe) 9620t and it didn't survive the test drive.
@@Bodhranarama yes ... this is the one he is talking about... on the side of the road...dead...
@@rogerjohnson6218 Yep I should have paid more attention to the original comment. What a shitshow that repair turned into through no fault of Warren. I hope deere learned a lesson there.
@@Bodhranarama This is the same tractor sadly... i just finished up that adventure only to start a new one on this thing.
The pup is too cute and the dogs are too. I confer that the dogs are more important than people. Well done tracing that problem under that greasy mess.
Problem on top of problems, followed by jury rigged fixes and hackery, on a POS JD, in the mud and snow. Good times!
1:05 Interesting, I hope you video the progress on this. I seem to remember your wife had a good name for this tractor.
Thanks for the video, take care
Well worked out warren, great as usual
Trust me buddy I have noticed in my older age I tend to try to find easy way .but other day sucked had to install a heating system under house and retrofit duct work believe it or not works awsome I'm still hurting from being in small sardines area 😂
That would have taken Jaun Deer 2 weeks to figure out..........!
Good old wiring always gives a guy the geares
The weather looks quite miserable there Warren
I remember Enloe from when I worked for Steve's Pumps 30 years ago.
They have been around along time. One of their relatives Thaya was my teacher in highschool.
100% the temp sensor on the thermostat housing, controls the cold weather advance on the pump. I have had to change a bunch of them.
Great video Warren really enjoy watching you work on your service calls. Figuring out the troubles on the drilling rig and getting it off the road. The electrical gremlins on the 5410 JD. Thanks for sharing stay safe Warren.
Hi Warren , top vid this one , thank you , good job , cheers
As I work on drill rigs of all types and been a long time viewer it’s nice seeing a video of you working on one ! Thanks for all the videos Warren as always
Thanks Warren! Love the vidjeos !
That drill rig seen better days, dogs are good stress relievers they make a bad day go away.
You bet! 🇨🇦
Yep, go to the tavern for an hour or 2 leave your lady in the front and your doģ in the back and just see which one is most happy to see you return.
Thank you.
Too bad about the Deere Engine. It will be interesting to see what went wrong with it. Pretty cool old drill rig. Hooch is a cute little pup. We had a litter of Black Lab Pups back in 2005. We had a hard time getting rid of them, so they went to a few friends. We were able to watch them grow old and become awesome dogs. One of my friends was going through some tough times and the dog was exactly what he needed and she turned out to be a great dog.
Glad you were able to spend some time with your son. Thanks a bunch for the videos, really appreciate them.
I worked on a 5410 about 10 years ago I believe it was the exact same problem, If my memory serves me correct.
Crazy to think you are getting the same weather we are in the Midwest... we are finally just now getting real cold to freeze up.
Looks like Warren has another doggie to ride shotgun with him.
Has he still got Duke? or is Duke too old to ride about with him. Warren has a heart of gold as far as doggies are concerned, people not so much, LoL.
Warren is an all round good guy.
He's retired.
@@westerntruckandtractorrepa1353 Bless him, he always comes across as a chilled dog, but I bet he's always looking after the people in the house. What breed of doggie is your new copilot?
You always teach some something new in every video fucking loves it keep em coming 🙏❤️🔥
O heck Warren . I do remember all the trouble you had with that 9620T .one reman engine after another .if I remember correctly they tried to blame you and where supposed to be there when you did the last engine.
So if you are going to do the engine rebuild then it will be fine.
Nice bit of fault finding there 👍👍👍
Thanks for video Warren John Deere sure cause you some problems
It’s usually not the coil, it’s the temp sensor in the water manifold just above the pump.
Unplug it and the fuse will hold. That 5410 obviously hasn’t been washed enough to screw up the fuse holders yet. Clean tractors on a farm have corroded fuses! 20 series was the same but on the 25 series the geniuses moved the fuse panel down in front of the rear axle by your left heel! There will be so much crap and mud packed around it, you’ll have to dig for it! Needed to have the fuses under the hood where engine heat will keep them dry!
Got a 5420 with over 9000 hours still.
Juan deere…. Fuckin funny man. Perfect. Chinese and Mexican junk is killing everything . I work in construction, and the influence of garbage is strong from top to bottom and sideways. Has me screaming,spitting,and cussing everyday
Where i worked we had 3 cat forklifts with 3208 man they run hard just change oil and fuel filters often ran them very hard we screamed the hell out of them but when a 3208 grenades wow it sure makes a mess
Sounded like the belts started squealing when you disconnected the jump box?
Re: 5410 - At least it ain't a Paccar....
Wonder how many hrs on that little tractor.
Puppy is cute as a button
I carry a bag of resettable fuses makes testing easier and cheaper.
Had that problem on a Ford key switch was bad
take that 9620to junkyard
da man
Old T-4 rig
Hooch is a good looking pup. Remans suck. Auto business is the same
👍
Warren. Sometimes you just gotta say screw the vids mate
Those packrats sure do like eating John Deere seat upholstery, right?
Better get that cracked windshield fixed before the dot natzis get ya.
I have a 5410 and think it is gravity fed. I know when you change the fuel filter you better have the tank full or it is impossible to get the air out and reprimed.
Have ptsd from it i need comp hand in there
This engine is a squealing squeaker or is it a squeaking squealer? 😂 Best from Thomas in good ol' Germany.
Hey, at least it runs in contrast to the Juanita Deere reman junk.
Yup I hate those people I've had em take out when it has blown motor
I like to diagnose problems, but not in cold, miserable weather with time short and customers on your back, asking why your'e running late!
Next time just look up fuel pump part will at least tell you it's cam or electric or whatever type
1 dollar windscreen
Oh, I got a JD-5410 and that sum-b#>-×h is broken again...Only starts on a jump box & there's no da>m front bucket locks, Scoopin up manure is all it can do, stinks & smells like poo poo.....I'm here all week....
Man that pile of junk 9620T needs an engine again? Wow, just goes to show the lack of quality workmanship in remanufactured engines. If that's the same tractor you put at least 2 engines in before I remember how much trouble it gave you.
The engines you rebuild seem to hold up, but that's because of your attention to detail and making sure everything is done right.
I feel bad for the owner of that 9620T. Sounds like it's cost him a small fortune.
Same POS John Deere.
It's a JD. Of course you can't get to anything....
Hello Warren dogs to me are my world as well
Thanks again for another great video
Always a joy to watch
Regards