Thanks for the video. I'm doing my plugs soon, and you gave me some good info. I think I'll change the intake gasket, but I'll decide when i have it off.
I love this video. You make it look so easy and smooth. I will subscribe to your channel, perhaps their are other things I can learn from your videos. Thank you again.
@brimet5701 When you open the individual boxes there should be either cardboard or plastic cylinders protecting the spark plug electrode from getting bent 👍
its crazy how hard they make things to get to parts that need to be replaced...I didnt realiz theres was so much to remove to get to these plugs...was going to tackle this next spring...
@@flyer8493 Yeah some manufactures recommend it and some don't mention it at all. I don't think I've come across one yet that said specifically not to. I like using it but it's up to you 👍
@@shawneberhardt9004 These rubber gaskets are reusable. Most of the time they are still good. They aren't too expensive though and it may feel good knowing they are new.
Great video. Not much on UA-cam that does a complete walk through on this motor like you did. Thanks!
@@walk4God Glad this video was helpful! Overall it's not a bad job 👍
That video really makes all the steps clear for the home mechanic who has not done a spark plug change on this vehicle before👍
@@timothyboucher9371 Glad this was helpful 🙂
Great job! Thanks!
Excellent advice and video. Was able to complete the task with zero problems. Thanks!!
@@dustinhart9094 Nice! 👊 Glad this video was helpful 🙂
You tube needs more like you
Thanks! Glad this video was helpful 🙂
Thank you for sharing I am ready to do mine now.
@@mateodemateus5444 You got this 👊. If you have any questions or you learn some tips or tricks feel free to share 🙂
Great video, very instructive made it pretty simple
@@bryandavis2571 Glad this was helpful 🙂
It was and because I had to go back in to tighten a spark plug I definitely recommend listening to using a torque wrench
Thanks for the video. I'm doing my plugs soon, and you gave me some good info. I think I'll change the intake gasket, but I'll decide when i have it off.
@@toolinhand You're welcome! If you have any questions feel free to post them 👍
I love this video. You make it look so easy and smooth. I will subscribe to your channel, perhaps their are other things I can learn from your videos. Thank you again.
@@jamesk.herder624 Glad this video was helpful 🙂
I have a 2013 Chevy traverse with 107,000 would you recommending doing the plugs and the intake gasket at the same time
@@dvaidm I think it's a good idea. The intake gasket doesn't cost that much more and you're already in there working 👍
A question friend, I hope you can help me. I need to change the OCV oil control Valve where a 2014 Chevy Traverse is located.
Good video. Well done. Do you have to set the spark plug gap, or is it pre-set from the factory? What would the gap be if necessary?
@@brimet5701 They are factory gapped and are ready out of the box. The bottom of the spark plugs should be protected by a cardboard cylinder.
@ValleyMobileAutomotive Thanks for your reply. I bought my plugs at the local GM dealership. They were in individual boxes.
@brimet5701 When you open the individual boxes there should be either cardboard or plastic cylinders protecting the spark plug electrode from getting bent 👍
its crazy how hard they make things to get to parts that need to be replaced...I didnt realiz theres was so much to remove to get to these plugs...was going to tackle this next spring...
it’s actually very easy just did it today took about a 1-2 hrs
How did you really get that front hose off...I seen the scene skip ... mine is beyond stuck and I'm not trying to cut it off
@@arecipe4life995 Do you mean the brake booster hose? No special trick other than using a pick to slide under the hose.
Is it 13 ft lbs or 15 for the plugs?
I've seen both, just dont know what to settle on
@@anthonytech The manual I have says 13 foot pounds 👍
I’ve read somewhere (don’t remember where) that chrome threaded spark plugs don’t need anti seize. But it definitely doesn’t hurt either.
@@flyer8493 Yeah some manufactures recommend it and some don't mention it at all. I don't think I've come across one yet that said specifically not to. I like using it but it's up to you 👍
Nice job men.
@@AlbertoMtz560 Thanks! Glad this is helpful 👍
How likely the gasket manifold would “need” to be changed? Want to buy all parts needed before I tear it all apart being my only available vehicle…
@@shawneberhardt9004 These rubber gaskets are reusable. Most of the time they are still good. They aren't too expensive though and it may feel good knowing they are new.
"the good news is, its not too scary"....proceeds to disconnect 7 million hoses, clamps, tabs and bolts
@@akumasiouxpreme Haha I guess it's all relative. Compared to most V6 transverse engines this one isn't too bad.
Negative Ghost Rider. The intake DOES NOT have to be removed.
@@elcomandante9299 That's step one in the repair manual. Glad you were able to do yours without removing the intake 👍
How to do it without removing it?