V3X Long Range Bow Setup For Total Archery Challenge
Вставка
- Опубліковано 2 жов 2024
- BEEREAL MERCH - beerealmerch.com
ULTRAVIEW - ultraviewarche...
MY LAS ARCHERY EQUIPMENT - www.lancastera....
15% OFF BRCC - partner.blackr....
Check out my PODCAST - apple.co/3vyQ6JP
INSTAGRAM - / chrisbeereal
SAVE 20% ON HUNTWISE - huntwise.com/c...
My CAMERA Gear
My MAIN Camera - rb.gy/nzanez
My Favorite Mic - rb.gy/vbl1vn
My VLOG Lens - rb.gy/5pk6eg
Best DO-IT All Lens - rb.gy/klx2x5
Best Hunting Lens - rb.gy/wvwxan
Audio Recorder - rb.gy/5pklm2
Other Gear
Editing Laptop - rb.gy/jps8mn
Editing Software - rb.gy/pwwuo9
Best Action Cam - rb.gy/w302ih
Camera Case - rb.gy/ie3n8l
Best Beginner Camera to Film Hunts - rb.gy/j902od
My wife bought a 29" V3X for me as a Christmas gift. I finally collected all of the accessories I needed to be able to shoot it. This is the first bow that I have shot in around 30 years. I will be using mine for the Park City TAC this year. I have enjoyed watching your videos on bow setup, and look forward to a lot of fun at TAC and my first archery hunts later this year.
Chris Bee watching videos of Chris Bee while driving to a tourney. Thats what legends are made of.
Videos like this are what's making people get into archery
One adjustment, wait 2, wait 3, hold on, wait, let's just start over lol. That's exactly how it goes every time. Good thing you didn't do bare shafts
Those gloves you are wearing are great for centerpinning winter steelhead
Glad to see I wasn’t the only one, putting on a sight tape the day before!
In school and watching Chris Bee. Great day!
Just curious, why didn’t you swap the top hats instead of moving the rest away from center shot? Also, I’ve been watching the bow builds for years and I’ve never seen you time the cams in a draw board when you are setting up. That could have possibly been part of the high tear issue in this video along with the shaft diameter differences. I’m sure you do but maybe it’s not included in the videos?
Also, for tac and asa, do you think bare shaft tuning would get better flight for the longer yardage? I’d love to see a bow build video with swapping the hats and also hitting on cam timing as well as bare shaft tuning.
Top hats????? I never move the rest papertuning. Only micro adjust when walkback tuning. Just saying
just bought an ultraview UV3 with 4x lens and the rod! adding it to my collection. I bought the hinge last year.
Damn you rich rich huh?
So what sight and/or accessory are you using that you love so much for adjustability combination? That the rest of your viewers can try out?
That looks like a kickass bow 👍👍. Love it . Hunting rigs rock
@chris are you gonna be at the San Antonio TAC!
How n the hell are you able to not go crazy with that bino bag on your chest while shooting man??? It drove me NUTS when I tried it before hunting season 🤣
I would love to see your review of the Dialed Archery sight
I am continually amazed at the number of people I meet at various shoots that set up their gear like the a day or two before heading to these shoots. There can be so many variables to work out no matter who you are at setting up. Looking forward to spending a lot of money and time why would anyone not make sure the equipment is in perfect condition and 100% ready. Guess I’m OCD on stuff like this. In every TAC video there’s always several that have equipment issues.
What draw weight and arrow spine are you rocking in this set up?
Hey Chris if I can be of some assistance,I'll help you get rid of one of those foam targets!!😂😂
I just picked up your guys' (ultraview)/nockon pse grip. So excited to try it out!
When is that black cork patch hat going to be listed for sale on your website?
@TEXT+①(⑧①③) ⑨②②-⑤①⑧⑦ Please go away Scammer
This Setup is incredible
I see a little fish tail action too.
Where are you getting all of those high roller foam targets? Are you the reason they are sold out?
I like it ! I like shooting anything really . Been doing .22 s after picking up a used Marlin model 60 with the last round bolt hold open , 22” barrel and 18 round capacity which was changed in 1990 I believe to 19” barrel and 14 round capacity . Pretty accurate .22 and I have a few to compare with . Take down is easy too . Highly recommend used Marlin model 60 s .22 or older Remingtons or anything older is so well made . There’s probably 10 bows in the wall and the one I grab a lot is an old 2008 diamond bowtech marquis . Try one or get one 👍👍. Not bad at all . There’s also a matthews I really like too. Compounds last a good while taken care of properly like any weapon that fires . There’s something natural about shooting bows that I like . Like it s a real damn hunt when I go out with a bow . Totally dig the woods 👍👍
My TAC set up this year is the V3X-29 with Ultraview UV3XL 2 pin with HHA Tetra and Hamskea Epsilon.
And Black Eagle X-impacts with AAE Max veins.
Can’t wait
Did you have any windage clearance issues running the uv3xl and the bridge lock mounting method? Basically was your sight housing tucked behind your riser at all?
@@scottrice1812
I will report back to you on that next week after the build is completed.
Still waiting on the HHA UV3 post, Infinite adjust bracket, and HHA short dovetail to come in.
Should be here next week.
Maybe someone else can chime in in the meantime.
I’ve had other sights in the past that ended up being tucked behind the riser tiny bit.
Dude! We were there too! I saw you shooting! I didn’t want to bother you so we watched for awhile and moved on! Great to see you buddy! We will meet again my friend.
Keep living the dream!
One of mine was hitting the rest and it was driving me nuts so I switched it whisker biscuit and problem was solved . Not sure if it’s the best tech but it works for my hunting bow . Drives me nuts to see an arrow not fly true and straight .
What jig is that for second axis?
That was painful. Good luck
I'm curious was there an offset bar required for this hha sight setup to compensate right travel clearance some others experienced with the bridge-lock technology or was hha's sight divot bar adjustment with micro tune enough to surpass it?
Bee real tuque sorry beenie haha and I from Canada looks deadly
You coming to Michigan TAC
It wouldn't be a chris bee video if he didn't drop his release atleast 5 times.
Chris, I received an email stating that I won a prize from you channel but I think its a scam...
"Congrats you have been selected among our shortlisted winners from our previous giveaway, Contact the number above... "
the prize being Hoyt carbon RX-7.
I thought that you should know
Wow! that's fast! You're shooting #75 I guess...
What sight bar is that?
Chris I will buy your bow case
I'd love to own a Mathews bow 🏹
Just do it! Get one, they're badass!!
Where can I buy your stabilizers,I already have the grips, the UV3XL, waiting for the Landslyde! I like your classes!
They're made by Shrewd
Do you run a helical on a four fletch?
Could you help me out on like how to sight in a sub $50 5 pin sight, I’ve been having lots of trouble getting in roughly dialed in past 30
so many excuses lol def the wind .........ugh this goofy jacket
Please have enough respect for others and don't watch videos or use your phone while driving...
Also in one of your videos you had a “blackout” edition UV3, how can I get one??
That's the only way you should shoot a boat is bare shaft otherwise you're just lying to yourself if you're not shootin Is a bear shaft through paper and you're just adjusting the rest that's crazy you know you flip the top pants you said the last then the middle and flip the top hats correct I've never had one argumental thing to say about anything but I thought that's how you got them
you got 10x50 binoculars?
Love seeing the V3X being shot! Reminds me of the 2018/2019 vids. Good stuff Chris.🤙🏽🐝
Exelente vídeo meu brother tmj 👊🦾
First
I am getting a nock right tear and I have moved the rest a bunch and it is the same exact tear. How do I fix that? Is it form or the bow
A) Are you sure you're correcting the tear the right way? B) Check it's not your form. C) Move your cams.
@@jbr9433 if it’s a nock right tear then I would move the rest to the right. Correct?
@@camabit8819 Opposite. Nock right tear = rest to the left
Let’s go
Im curious about the song that was in the end anyone know?
Do you use a lens and clarifier? I didn't catch if ya do in the video
Why don't you ever shoot your v3x33 ???????
what sitka jacket are you wearing in this vid
Drink less coffee my friend....;-)
Glad you got better weather for TAC. Can’t wait for mine at 7Springs, PA. Were you able to your sight set to beyond 100 yards or did you have to just gap shoot beyond the 100 yard distance?
What mount is the ultraview scope mounted to
HHA
@chris bee you said you want a new bow case I have and use a skb branded case it is a hard case tsa approved and it can be locked. It comes with a key. The case is made in California a very well put together very nice case highly recommend it I love my skb case I paid 150$ for it but totally worth the money
Last year for Pennsylvania I did the same thing. Good to know there are others, and you will still have a blast.
This year we are going to make Tennessee and Colorado, very excited.
Good Luck, shoot straight.
Hey any possible way you can do a intermediate bow build, I’m ready to get a second bow but also do not want to spend over 1300 on a bow, keep it under 1000? Or around 1000
That cmd Z comment was funny haha
Yo @Chris Bee. What's the brand/name of that bow case of yours? Also keen to see what you put up for TAC this year.
Sweet video. Got to be careful shooting out a window. Would be awful for a utilities worker come check your meter and catch one in the leg or something.
My boy Bryce Fitzgerald hit the 12 ring twice right in front of you… now you gotta make a set up for it!lol please win the truck
Thanks for the video Chris! I would love to see a video of you dumping your tournament bag so we can see what goes into that sucker.
I was thinking about setting up my for my bow for hunting with 3 pin ,22-33-43 see if u can try that set up
What strings? Ive had my V3X for a couple months. What do you recommend?
What style of Sitka jacket is that?
I went out Thursday evening before Oklahoma TAC to do one last check on everything. When I went to dial my sight the entire thing dropped about a quarter inch. I ended up getting everything tightened back up and sighted in the dark with a spot light. Had a great time out there Friday and Sunday.
What sight was that
Did I win a giveaway
what release model is that?
bee is a shooting machine
Are you doing a bow giveaway? You mentioned it a couple of videos ago
Which hha sight is this?
Looks like a short bow for long distance. Why not the 33 inch?
If stays tear high that many times sometimes a half twist here or there in the buss or yoke can help.
Do you want to have a shoot off a TAC for an ultra view in Michigan?
just bought one today $2,300. can't wait to go shoot!
Bro!!!! Chris my Mathews brother lmao.......why is my sight not in line with my arrow? Ppl have told me it's cause my riser actually flexes when I'm at full draw.? I wanted your opinion or someone that has a little more experience than me. My bow is dead on even at 80 yards so please Chris I would like your in put thanks. Keep em flying straight bro! Lol
Hey, why does a person named Kimberly savage want me to send her money for the shipping on my son's prize?
That's odd.....🤔
THIS IS A SCAM!!!! This person, who goes by the name Kimberly Savage, is using Chris's name to scam people by telling them they've won a prize and then asking them to send $133 for the shipping on the prize. Don't fall for it!! There is no prize. She tried to do this to my son and I'm turning her in!
Would you be able to show us how to correctly read a tear through paper?
What does Chris shoot, the UV3XL or just UV3 for hunting
You should give the bow case to a subscriber. 😃
Oh! You are the one that got registered =) Congrats!
durability test? chris will find out
How do you like the .003 axis long ranges?
Do you have a vid for your sight setup?
You should sell me one of those big high rollers
you gotta drop that hat on the merch sight
Lazy tuning, change the top hats.
cool you are a perfectionist
Taking my V3X 33 to seven Springs 👍
Hyped for the tac episodes!!
For TAC, why not use the 33 instead of the 29? It's the perfect bow for TAC
There is no one perfect bow for all.
Dos the single pin make a huge difference in shooting longer ranges ? Thinking about it.
I got the hha tetra after having a four pin sight and really like the change. Gives me a lot less to focus on and doesn’t clutter the picture
I peeped the new hats 😉
Yesss! This is the video I’ve hoped for 💪🏼
Good way to end the work day.
Love all the vids Chris
Cool