Hello, Thanks you for your vidéo, i have à question for you, do you know what is the best brand for nozzle in 2.5 TDI V6 ? A4 B7. And for you the manifold is nécessary if you put 2265 mfs turbo ? Your are really different with your manifold ? Thanks you
Hi, I have Skoda Superb 2.5Tdi 120kw BDG engine, are these manifolds necessary to buy on this engine? I would like to have 300Hp on mine. What do you think?
@@thomas_s85 hard to tell if it works out because the stucture is quite odd on stock manifolds. Quite a job i think. Probably with the same time and effort new manifolds are done 🤔
OK thank you for the information I can get the Turbo with vac conversion brand new but they saying it should be run on a tubular manifold I will try and find some nozzles and see if I can find someone to fabricate me a manifold but is it OK to contact you when I wand to buy the exhaust manifold and Turbo collector pipes and thank you for your help
hi I am finding it hard to find information on tuning my engine it is a 2001/2002 A4 2.5 tdi V6 180 bhp I am wanting to tune it to 300 bhp is this possible and what would I need to do in order to get this power from it any information would be appreciated
+Ian Preston Hi, Basic recipe is "easy". You need big turbo, big nozzles and supporting mods. Basically turbo like GTB2260VK converted to use vacuum, bigger nozzles for example from CPC (even they have some quality issues) or buy AFB injectors and install Bosio Race683 nozzles. Supporting mods are bigger intercooler, cleaned and not worn heads, 4 bar map and Some ecu tuning is needed too.
hi there. I'm affraid there are no manifolds available anymore. The welder who made those did garbaged the jig for those already since nobody wanted those for years. :) I should have some flanges left if wanted
@@bigdiffas ahh thats ashame. The flanges might be handy but im not sure. Im not running crazy power just about 260 and do have a turbo coming capable of 280, so was just wanting to future proof the car a bit! Might just try and get some oem manifolds
Full Sre-clutch set with stock flywheel seems to work out pretty nice. Takes 700+nm easy. When using small turbo like 2260 you probably need to limit torque under 2000rpm to somewhere 400-450nm
ok got it looking for 1.right exhaust manifold 2.left exhaust manifold 3.custom turbo all for the same toureg How and where can i purchase this i will handle shipping and handling
Hello, Thanks you for your vidéo, i have à question for you, do you know what is the best brand for nozzle in 2.5 TDI V6 ? A4 B7.
And for you the manifold is nécessary if you put 2265 mfs turbo ?
Your are really different with your manifold ?
Thanks you
Hi, whats your power goal? There are not that many anymore available. You probably have bdg engine so cummins oe dsla142p970 is good option to go
@@bigdiffas hello Thanks to answer, it’s for my friend, he want about 280HP, i think turbo in 2265, nozzles, intercooler and full exhaust
@@lithsooo with good tune 280 doable with cummins nozzles. Also external lift pump with around 300-350l/h 1.2-1 5bar
Hi, I have Skoda Superb 2.5Tdi 120kw BDG engine, are these manifolds necessary to buy on this engine? I would like to have 300Hp on mine. What do you think?
To be honest i feel it is must. I have destroyed two turbos because manifolds and it was around 300hp range
@@bigdiffas So do I need a custom headers? Or can i just cut stovk headers, remove the canals from inside and weld them back?
@@thomas_s85 hard to tell if it works out because the stucture is quite odd on stock manifolds. Quite a job i think. Probably with the same time and effort new manifolds are done 🤔
hello, what was the diameter of the pipe
About 42mm
OK thank you for the information I can get the Turbo with vac conversion brand new but they saying it should be run on a tubular manifold I will try and find some nozzles and see if I can find someone to fabricate me a manifold but is it OK to contact you when I wand to buy the exhaust manifold and Turbo collector pipes and thank you for your help
+Ian Preston Tubular manifolds are nonsense in diesels. You want to keep manifold as short as possible and not to loss any flow and heat.
hi I am finding it hard to find information on tuning my engine it is a 2001/2002 A4 2.5 tdi V6 180 bhp I am wanting to tune it to 300 bhp is this possible and what would I need to do in order to get this power from it any information would be appreciated
+Ian Preston Hi,
Basic recipe is "easy". You need big turbo, big nozzles and supporting mods. Basically turbo like GTB2260VK converted to use vacuum, bigger nozzles for example from CPC (even they have some quality issues) or buy AFB injectors and install Bosio Race683 nozzles. Supporting mods are bigger intercooler, cleaned and not worn heads, 4 bar map and Some ecu tuning is needed too.
🌟🏁AUDI ONLY LOVE 🏁🌟
junk
Hi diffas, any chance you still have or make these?
hi there. I'm affraid there are no manifolds available anymore. The welder who made those did garbaged the jig for those already since nobody wanted those for years. :) I should have some flanges left if wanted
@@bigdiffas ahh thats ashame. The flanges might be handy but im not sure. Im not running crazy power just about 260 and do have a turbo coming capable of 280, so was just wanting to future proof the car a bit! Might just try and get some oem manifolds
the flanges are made from stainless steel or normal steel ??
Thanks
Normal stainless steel. 1.4404
+bigdiffas will these fit the ake engine and so I can fit the GTB2260VK turbo thank you for your help
+Ian Preston gtb2260vk uses different flange so you need to make New collector for that.
+bigdiffas could fin Turbo make this for me and Turbo manifold to fit my ake engine
Well fin-turbo can make you bolt on turbo for you current collector or you have gtb2260 already in your hands?
what best clutch to use and flywheel for the ake cheers
Full Sre-clutch set with stock flywheel seems to work out pretty nice. Takes 700+nm easy. When using small turbo like 2260 you probably need to limit torque under 2000rpm to somewhere 400-450nm
ok got it looking for
1.right exhaust manifold
2.left exhaust manifold
3.custom turbo
all for the same toureg
How and where can i purchase this i will handle shipping and handling
For v10 or v6 engine? There are no jigs for 3.0tdi or 5.0tdi engines, so not possible to weld them. This set is for 2.5tdi v6, touareg has 3.0tdi v6
+bigdiffas engine is a 2.5 TDI so am I in luck ?
+bigdiffas I have 2.5 TDI so how do I purchase the stated items and how much will it cost me ?
+musa kiema it is i5 engine then
+bigdiffas give your email adress
👍🏁🌟💙💛🌟🏁👍
How much to make me one of these???
Price is 600€ for manifolds and with up-link pipes 900€. (including VAT)
Can i pay This ??
Hmmm. What do you wanna pay?
bigdiffas
Whom I could buy from you, would I buy it, too, what should it cost?
@@professionaltdi4386 you can ask from bike & tuning teemu facebook.com/moottoripyorahuolto/
I did order mine from him