A tip 3M sells a kit for removing spoilers, body side mouldings is a spatula and a spray bottle to make easy on removing parts with double sided tape also 3M sells adhesive promoter so just in case u r going to use double sided tape it will stick very good to the surface and it won't peel later
nice install. However one thing I learned when drilling through metal. It's best to tape over the area you are going to drill. It helps to achieve a better clean hole. I use masking tape, mark and drill. It works every-time for me.
A couple suggestions for you, when you are inserting the screw into the trunk lid to secure the spoiler, specifically the one you dropped, put a piece of masking tape over the hex head and force the socket on top, this will hold the ball in the socket until it is secure then you can wiggle the socket off and pull the tape off with a pair of needle-nose pliers. It will make life a lot simpler and avoid the headache you went through. Also with the metal shavings that landed on your car, snatch them up with a magnet so they won't scratch your paint when you clean them up. Also when you have the holes filled and painted make sure they also paint around the holes you drilled on the underside. If you don't do this rust will set in. Every point where water can get in contact with bare metal is a breeding point for rust.
The tape idea I will attempt for a next project if I need to. I didn't think of that doing that. I ended up blowing away the metal shavings after I realized what I was doing. Lesson learned. As for the holes, I will cover them up. Just waiting on the stripes and looking at the best way to do it. The spoiler will be removed and holes will be painted before I put it back on.
Remember when you drilling holes whatever you're installing remember your old ring seal the old rain seal one for vibration like music systems sometimes is better the O-ring seal it inner and outer sometimes a double layer or just a really thick layer something like a nut and bolt steel o-ring nutting bolt double seal to prevent vibration so because of the vibration itself sometimes the key ring itself or vibrate out then the trunk pops up and then sometimes people just walk in there and steal just because of the vibration so preventing theft with the O-ring seal is no different than the keyless ignition that he rang a prevent stealth it prevents stealth and stealing but it prevents stealing or manipulation of the motherboard the motherboard thing the computer system tell if anyone messes with the computer system in modern-day the car it might move for a little while but eventually the system of shut down the swing being stolen it'll shut down and it might shut down on the highway regardless if the key Rings there are not it's in his hacking of the motherboard of manipulation of the ignition system there's a key system check that always has to be accounted for with the computer system under the motherboard startup system check without that the car system will start or it will not start or shut down prevention of theft 911 issue when they stole the airplane this is what I wanted to basically build he'll put into play to prevent anything from being stolen from Cars to airplanes system check DEFCON 5
Looks great. I give you credit for your ability to forge ahead and drill holes into that beautiful car. No margin for error. No way I could stomach doing that on my 350 ... I freak out from splattered bug guts on my bumper so this process would kill me. Again great job!!
It wasn't that bad once you make the first hole. But even then, making sure that everything was lined first was the scary part. I just have to address holes though.
don't know why I didn't I did not immediately noticed your channel before and you also. I'm just amazed how you do your love to cars especially to your mustang, and how you able to do the maintenance, modifications and other stuff on it, that's really amazing😊 by the way you're just beautiful as your mustang gt350R
Great job on the placement of that spoiler. I cringed every time the drill went into that trunk lid. I've seen too many people mess that up. Finished install looks great.
I got to give you props. Not only do you love cars but you actually love working on them too. Seen some of your videos and my jaw drops everytime. Keep up the great work .
@@ironmarshmallow5362 Not everyone is a pervert. Some of us love the car culture no matter who is on the tube Male or female.. .. So speak for yourself perv boy...
You can use fishing line to cut the tape and an eraser wheel to remove any leftover adhesive. A quick polish of the area and youre done. Good job on the pry tool method though.
The spoiler has these guide rods that go into the trunk. That is why I have holes. So the line would not be able to pass through them. A polish is needed which will get done.
Hey Doris...Woooow, "The Beast" looks soooo cool with the new Spoiler..I am like you...I LOVE Carbon Fibre Parts...You did a great Job, Doris...Enjoy "The Beast" and drive safely...Take care...Hugs from Switzerland..
Don't pass such type of comment. If anyone passes the same to your sister then how would you feel!!! Judge the same first on your own and then pass it... No at all appreciated for such comment..
Doris, One Word describes the look of your Stang with the new spoiler.....HARDCORE !! Btw, you are NOT alone. When those garage door springs pop, EVERYBODY things "Damn......who's Shooting ????"
Just a little tip for ya if you ever have to do this again. Buy you fishing line, slip it under wing and shimmy the line back and forth after using heat like you did and continue to do that from one end to the other and the glue will be sliced which releases the spoiler from the glue faster. Also prevents from damaging your paint.
Friendly TIP: Next time...use fishing line. It will get the two sided tape from the spoiler, then using the chemicals or heat gun for cleanup. YOU looking fabulous as always...and appreciate your videos.
The fishing line trick has worked on other cars..like BMW..but not with this one. The spoiler has these guide rods that go into the trunk. That is why I have holes. So the line would not be able to pass through them.
Woman.Driven ... YES, I did notice them in the video...and the holes left behind. However, the fishing line should have worked for the other area of the spoiler (maybe) lol!! Still, that was a lot of work...and YOU really did a fabulous job! Merci
Enjoyed your well done video on the installation of your new spoiler. Your car looks great either way, sadly though, now you have those holes mid deck lid. I did want to recommend that you squeeze a bit of GE Silicone around the new holes you drilled in your deck lid to seal them from getting water to the raw metal and prevent rusting.
They actually sell this carbon fiber piece that covers the holes so I'm getting that next. If I don't like now it looks, then mesh, bondo, sand so it's flush, paint and re-stripe the trunk.
Great Shelby and keep doing whatever you want to it cuz its yours dont listen to ppls comments about being fake. Its a Shelby and it will always be one. Keep going
You're comment did not get deleted. It got sent to spam. Why? You keep leaving the same comments over and over. I could understand a GT non GT350 being a fake GT350R...but when this car is an actual GT350 (same engine, look, drivetrain) Putting a spoiler that serves a purpose on a track better than the original one means I care about making changes to better then aero for a car I will be taking to the track.
I love how your GT350 is coming alone and can’t wait for the next video. I got my 2018 GT in June and it’s scary wrenching on a new car, but your skills make it happen all day long and it’s on a Shelby too, I have nothing but love and respect for you! Keep up the great content and motivation.
Congratulations on your GT! It is a great car. What trans did you get? We got our cars around the same time then. It is scary but part of the process of installing these modifications. If we don't do it, either way someone else will at a shop. Thank you, I do appreciate your support.
Woman.Driven Hola from Tampa, Fl. I bought my GT with the 10 speed auto and 3.55 gearing. I plan to make my car breath with a better exhaust setup, tune, and traction. I also want to do body mods that are functional. I rather do the mods myself as you truly know your vehicle inside-out. If there’s trouble at the track, you know how to modify it on the spot. You are a lot further than me on mods, but I’ll get there. Once again, I wish you great success with your channel.
You could still open your garage that's what that pull cord that hangs down is for pull that it disconnects it from the garage door opener and you can by hand pull and push door open!
Nice, the finger nail polish Oder is the clear coat on the spoiler and if you can smell it from unpacking that's a sign of it being freshly made just like cookies
Garage door springs usually take about 15 minutes to replace and I would recommend replacing them both and not just one because when one goes out it's not long before the second goes out and you don't want another loud bang in the night scaring the crap out of you and yours. Just my advice. BTW nice wing it does tie in the car and complete the look.
The gentleman that came out recommended the same thing. Both were replaced along with the bearings for the pole that spins in place. All is working good. Thanks, the wing does complete it. 👍
Nice job. I'm not certain where you live but I'm concerned about leaving those holes unfilled. The car may spend much of its time in the garage, but you can get caught in the rain while you're out, then you'll water issues in the trunk. I'm impressed with the 4 car garage. Found the video educational. Thx
I will fix the holes myself. Just some simple body work and re-stripe. None of the center pieces I found to cover up look good to me. Thank you for watching.
Love how clean everything looks in your garage entirely must lots of work , not worried about the finger prints, however, didn't like the dusting of the metal shaves with your hands across the paint not safe for you or the paint. Sorry obsess about paint finishes lol, but great video.
I caught myself after the first few times. After that, I just blew them off. I will have to polish my trunk anyways. I have some light scratches due to the pulling of the spoiler 😅
The DRVNFAST giveaway is officially live! ENTER TO WIN my 2019 Ford Mustang GT. Get your entries here: www.drvnfast.com
A tip 3M sells a kit for removing spoilers, body side mouldings is a spatula and a spray bottle to make easy on removing parts with double sided tape also 3M sells adhesive promoter so just in case u r going to use double sided tape it will stick very good to the surface and it won't peel later
nice install. However one thing I learned when drilling through metal. It's best to tape over the area you are going to drill. It helps to achieve a better clean hole. I use masking tape, mark and drill. It works every-time for me.
I did not know that. It's actually a clever idea. I will remember that for next time. Thanks for watching!
A couple suggestions for you, when you are inserting the screw into the trunk lid to secure the spoiler, specifically the one you dropped, put a piece of masking tape over the hex head and force the socket on top, this will hold the ball in the socket until it is secure then you can wiggle the socket off and pull the tape off with a pair of needle-nose pliers. It will make life a lot simpler and avoid the headache you went through. Also with the metal shavings that landed on your car, snatch them up with a magnet so they won't scratch your paint when you clean them up. Also when you have the holes filled and painted make sure they also paint around the holes you drilled on the underside. If you don't do this rust will set in. Every point where water can get in contact with bare metal is a breeding point for rust.
The tape idea I will attempt for a next project if I need to. I didn't think of that doing that. I ended up blowing away the metal shavings after I realized what I was doing. Lesson learned. As for the holes, I will cover them up. Just waiting on the stripes and looking at the best way to do it. The spoiler will be removed and holes will be painted before I put it back on.
Shoutout to u Woman Driven!! after every install or work u do on your car you can see the excitement and joy in your face.
Thank you, I appreciate it. Seeing how the mods came out once I'm finished does bring a smile to my face.
I do not know who is more beautiful, the car or the owner.
But the beauty of this woman is incredible.
Thank you for your kind words.
All success for you and your channel.
@@woman.driven May I know your name Please
The GT350 now looks much better and... you look wonderful Doris, congratulations for another excellent video
Thank you. The look is wonderful. I love the way it flows.
You always make great videos. That's what I do for a living I m a mechanic. And it's great to see women doing the same thing.
Thank you. Hopefully I'm doing things right lol.
@@woman.driven yes you do everything right and If don't know you look it up and then you do it
I'm a Ford man I got a 08 Ford F-150 4+4 my dream car is what you got right they're in the garage that GT350
Thanks for sharing this. Getting ready to swap a 2020 GT500 spoiler with Gurnee flap on mine
This is what ladies on the model runway should look like.
😅🤗 Thanks.
@@woman.driven no. Thank you.
Yeah
So you don't like girls 6'2 108 pounds 😁
@@ironmarshmallow5362 if you don't know what he meant by runaway then gtfo.
3:54 The rear looks good :)
6:19 I know!!
I’d eat it out
I'm hungry now
Not all heros wear cape
This helped me a lot installing this wing on my gt350
Remember when you drilling holes whatever you're installing remember your old ring seal the old rain seal one for vibration like music systems sometimes is better the O-ring seal it inner and outer sometimes a double layer or just a really thick layer something like a nut and bolt steel o-ring nutting bolt double seal to prevent vibration so because of the vibration itself sometimes the key ring itself or vibrate out then the trunk pops up and then sometimes people just walk in there and steal just because of the vibration so preventing theft with the O-ring seal is no different than the keyless ignition that he rang a prevent stealth it prevents stealth and stealing but it prevents stealing or manipulation of the motherboard the motherboard thing the computer system tell if anyone messes with the computer system in modern-day the car it might move for a little while but eventually the system of shut down the swing being stolen it'll shut down and it might shut down on the highway regardless if the key Rings there are not it's in his hacking of the motherboard of manipulation of the ignition system there's a key system check that always has to be accounted for with the computer system under the motherboard startup system check without that the car system will start or it will not start or shut down prevention of theft 911 issue when they stole the airplane this is what I wanted to basically build he'll put into play to prevent anything from being stolen from Cars to airplanes system check DEFCON 5
Costume B for the win! The 350 is looking great......more please!
I'll say it again just beautiful
I got click baited by the thighs in the thumbnail
No click bait here, what you see is what you get lol
@@woman.driven click bait in a good way :)
@@woman.driven yeahhhhh
So did I, but like the car too
@@woman.driven yep they look just as thick thank god you have them :)
Gotta love a queen who knows how to work on a car
Looks great. I give you credit for your ability to forge ahead and drill holes into that beautiful car. No margin for error. No way I could stomach doing that on my 350 ... I freak out from splattered bug guts on my bumper so this process would kill me. Again great job!!
It wasn't that bad once you make the first hole. But even then, making sure that everything was lined first was the scary part. I just have to address holes though.
These thumbnails are killing me woman! >_
🙌🏻🙌🏻🙌🏻 my Saturday was definitely a lil boring til now!! 😍
😀
don't know why I didn't I did not immediately noticed your channel before and you also. I'm just amazed how you do your love to cars especially to your mustang, and how you able to do the maintenance, modifications and other stuff on it, that's really amazing😊 by the way you're just beautiful as your mustang gt350R
I'm glad you noticed my channel now. Hopefully my content is good enough. Thanks for watching. 😀
@@woman.driven wow thank you for noticing my comment. Yes I do I love your videos 😊
Great job on the placement of that spoiler. I cringed every time the drill went into that trunk lid. I've seen too many people mess that up. Finished install looks great.
That was the most concerning parts. Making sure they were done right for the spoiler placement. Thank you.
I got to give you props. Not only do you love cars but you actually love working on them too. Seen some of your videos and my jaw drops everytime. Keep up the great work .
You're so kind, I do enjoy working and taking care of my cars. Thanks for watching, I do appreciate it.
Nice looking rear end, both the GT, and yours . Nice install. Have a nice day 😍😍
creep
Lmao this guy
Show some respect please..Why cant we be gentlemen..
@@ironmarshmallow5362 Not everyone is a pervert. Some of us love the car culture no matter who is on the tube Male or female.. .. So speak for yourself perv boy...
I laughed so much when I saw how much wrapping plastic that was on the spoiler. Your spoiler looks real good so it was worth it. 👍🏻
It was was too much. I thought I was done and then nope, more plastic lol. Thank you, it has the look now.
You can use fishing line to cut the tape and an eraser wheel to remove any leftover adhesive. A quick polish of the area and youre done. Good job on the pry tool method though.
The spoiler has these guide rods that go into the trunk. That is why I have holes. So the line would not be able to pass through them. A polish is needed which will get done.
Hey Doris...Woooow, "The Beast" looks soooo cool with the new Spoiler..I am like you...I LOVE Carbon Fibre Parts...You did a great Job, Doris...Enjoy "The Beast" and drive safely...Take care...Hugs from Switzerland..
I love the look. I will add a few more carbon pieces in the future to finish it up. But for now, I will enjoy the look it has. Thank you, take care.
That E92 tho !!
Yes, it's a great car and sounds amazing!
Idk how I missed this video but I found it since this is the spoiler I’m about to pull the trigger on...great video again 👌🏾
It's great, looks great and actually works at higher speeds..so be careful changing lanes too quick lol. Thanks for watching.
Woman.Driven thanks!!! What type of shop did you go to for the middle holes? Also have you had any wobbling or flex of the wing at the track
I am so glad that you Received The Package today!
I wasn't going to ask
We are very excited about your rear end looks very good
Thank you
😂😂😂👌
lol did she get it?
Don't pass such type of comment. If anyone passes the same to your sister then how would you feel!!! Judge the same first on your own and then pass it... No at all appreciated for such comment..
Farook Chowdhury hugh!!! tenías que ser aguafiestas!!!!! go get a life!
its looks awesome know
and you look gorgeous 💛
Thank you for your kind words.
Good job mamita! I love to see a woman who’s not afraid to get her hands dirty. The install looks awesome!
Thanks for watching. Install was fine after the initial shock of drilling into my trunk lol.
It’s great to see a woman that is both beautiful and loves cars. Nice job!
The wing looks good keep up the good work my friend awesome video
4:50 Booyah!!
This did make it look so much better! Also I've got 17 videos left. Already seen the other 34 😉 Obviously loving the channel.
lol..It got a few people to comment their distaste of it..but you can't please them all. I love it! Thank you!
The GT 350 Track Pack one looks so much better imo, nice and subtle for a GT
Damn that rear end looks just right 😉
Thank you!
04:07
They're both looking good but which one u ment? 😄
Buick Regal thirsty much too bad for you won’t be gettin it might as well enjoy the car my friend he he
*damn your channel blew up quick, you must have alot of groupies*
Including me.
Doris, One Word describes the look of your Stang with the new spoiler.....HARDCORE !! Btw, you are NOT alone. When those garage door springs pop, EVERYBODY things "Damn......who's Shooting ????"
I love it. It really looks good. 😂 you're not lying about the sound. I thought someone broke in the house shooting.
Just a little tip for ya if you ever have to do this again. Buy you fishing line, slip it under wing and shimmy the line back and forth after using heat like you did and continue to do that from one end to the other and the glue will be sliced which releases the spoiler from the glue faster. Also prevents from damaging your paint.
Sorry, just noticed someone else recommended this idea and you stated it could not work on this spoiler.
no worries. I tried that before and it didn't work. I just didn't waste film on it.
I really like ur video...Great work...Big lover of car....LOVE FROM INDIA
Thank you. Thanks for taking the time to watch.
Stopped watching college football & clicked on the video
😀 thank you.
Anytime, I enjoy watching your videos💯. Mustang's are my dream car, I'm 21 & working to buy my own Mustang soon
The coyote gen 2 or 3 Or a GT350. I cant decide which one
A coyote and GT350 are different cars, so it depends on what you plan to do with it.
I'll go twin turboz, from Hellion Turbo
Dorace, I just love all your videos and can't stop watching. Keep up the good work and smile.
Thanks so much for watching them. I really appreciate it. Cheers!
This is now my favorite channel and this the first video ive seen
Thank you! I do have a ZL1 video you might like judging by your username lol.
@@woman.driven hell yeah ill turn the post notification on lol 👍
Friendly TIP: Next time...use fishing line. It will get the two sided tape from the spoiler, then using the chemicals or heat gun for cleanup. YOU looking fabulous as always...and appreciate your videos.
The fishing line trick has worked on other cars..like BMW..but not with this one. The spoiler has these guide rods that go into the trunk. That is why I have holes. So the line would not be able to pass through them.
Woman.Driven ... YES, I did notice them in the video...and the holes left behind. However, the fishing line should have worked for the other area of the spoiler (maybe) lol!! Still, that was a lot of work...and YOU really did a fabulous job! Merci
One beautiful woman that loves cars and knows how to work on them .a perfect woman. My dream girl!!!!
Pen
Hope those holes will be fixed. I watched this video 2x. On 📺 and phone 📱. U all know why. 😂 respect to her man!
Enjoyed your well done video on the installation of your new spoiler. Your car looks great either way, sadly though, now you have those holes mid deck lid. I did want to recommend that you squeeze a bit of GE Silicone around the new holes you drilled in your deck lid to
seal them from getting water to the raw metal and prevent rusting.
They actually sell this carbon fiber piece that covers the holes so I'm getting that next. If I don't like now it looks, then mesh, bondo, sand so it's flush, paint and re-stripe the trunk.
Legal os seus vídeos, mais tarde coloca uma legenda enquanto você fala em português. Obrigado
Thesecomments are hella thirsty lol
I am into games..mainly racing..and mainly Forza and Forza Horizons.
Great Shelby and keep doing whatever you want to it cuz its yours dont listen to ppls comments about being fake. Its a Shelby and it will always be one. Keep going
Thank you. Oh, I don't listen at all. I'm going to keep doing whatever I want with my car as long as I enjoy it.
@@woman.driven hey if you still looking for cars to race i got a 2011 gt500 ill be glad to race my gt500 vs your gt350
Great job! Kudos to doing it yourself!
Notification Gang 💪
Hey now.
Like future said " im looking for her" beautiful lady
👍😀
Awesome job, the spoiler is sick!!! I love it!!!!👍🏾👍🏾👍🏾
love this spoiler. I bought one used and now I gotta find the the plastic pieces soni can drill and mount it! spoiler looks great
Do you also do the dishes?
😍😍😍😘😘
Great install, and good techniques and a heads up on the bolt dropping into that spot.... two thumbs up!!
That was a pain to take back out. Someone mentioned on here to use tape next time. Thanks.
Great job on the install and breaking ground to have more women involved in motor sports. Nice home and car collection as well
Hopefully other women can join and always show they can work on their cars. Thank you, my collection only consists of one car..the GT350.
Vidéos Very Nice my beautiful girl 😍 😍 😍
looks nice but now looks like a fake 350R. I dont like posers but will make exception for u lol
Why did ur comment get deleted?
You're comment did not get deleted. It got sent to spam. Why? You keep leaving the same comments over and over. I could understand a GT non GT350 being a fake GT350R...but when this car is an actual GT350 (same engine, look, drivetrain) Putting a spoiler that serves a purpose on a track better than the original one means I care about making changes to better then aero for a car I will be taking to the track.
His comment got sent to spam by going around saying the same thing over and over again to other people.
he thinks u deleted his comment but u didnt sometimes youtube falsely flags comments as spam i had it happen to me a few times
Unless you are forging your own parts in your backyard Mr. Sanders, someone has already been there done that, to each their own.
Great job, have been following your upgrades on GT350R and each one of them is awesome! More to come for sure, cheers!!
Wow, you know things. Awsome to see a woman knows how to work on cars
Thank you I appreciate it. Thanks for taking the time to watch. Cheers!
Woman u have high amount of determination, you do your best every time, very nice and neat work
Thank you, I appreciate it. Thanks for watching and take care.
Woman.Driven how old are you?
the smell is because of the curing process,great video
These guys are so in love no-one caught that no paint or primer was applied to the drilled holes.
Looks great than factory Spoiler, Fantastic!
?. Im in love with you. How could i fix that?
I love how your GT350 is coming alone and can’t wait for the next video. I got my 2018 GT in June and it’s scary wrenching on a new car, but your skills make it happen all day long and it’s on a Shelby too, I have nothing but love and respect for you! Keep up the great content and motivation.
Congratulations on your GT! It is a great car. What trans did you get? We got our cars around the same time then. It is scary but part of the process of installing these modifications. If we don't do it, either way someone else will at a shop. Thank you, I do appreciate your support.
Woman.Driven Hola from Tampa, Fl. I bought my GT with the 10 speed auto and 3.55 gearing. I plan to make my car breath with a better exhaust setup, tune, and traction. I also want to do body mods that are functional. I rather do the mods myself as you truly know your vehicle inside-out. If there’s trouble at the track, you know how to modify it on the spot. You are a lot further than me on mods, but I’ll get there. Once again, I wish you great success with your channel.
Really like that new spoiler! Well done!
I do as well..love the look.
wish we had more women like you who knows about cars in my country
Any woman driving a shelby is just badass
Yeah that rear end does look good! Thx for sharing
You could still open your garage that's what that pull cord that hangs down is for pull that it disconnects it from the garage door opener and you can by hand pull and push door open!
Geezzzzzz such a nice car along with the owner!!! Oh boy
I just joined your channel and right of the back I can honestly say that I'm liking what I'm seeing. Take care and keep up the good work!
Thank you so much. Very much appreciated. Hope you'll enjoy my future uploads. Thanks for watching. Cheers!
Felicidades era s una princesa y sabes de autos whauuuu dios te bendiga regalame el spoiler que le quitas
Awesome spoiler great job installing it 👍🏻
Looks way better. Nicely done
you are an inspiration. just binged almost your whole channel and can't wait to climb under my truck again
Thank you, I appreciate it. Glad you enjoyed the videos, more to come.
Wow you made that look easy, good video thanks
Nice, the finger nail polish Oder is the clear coat on the spoiler and if you can smell it from unpacking that's a sign of it being freshly made just like cookies
lol..well if cookies smelled like that 😂. Makes sense though. Thank you.
It came out really good, looks more agressive, itll stand out even more when its out during day light.
It does stand out. Especially from the rear. Looks really good. Thank you.
This would make me so nervous but you did a great job Doris!
Oh I was nervous..at first, then I had no choice to finish the job. Thank you!
Your welcome!!
Your garage is legit the size of my house 😯
Garage door springs usually take about 15 minutes to replace and I would recommend replacing them both and not just one because when one goes out it's not long before the second goes out and you don't want another loud bang in the night scaring the crap out of you and yours. Just my advice. BTW nice wing it does tie in the car and complete the look.
The gentleman that came out recommended the same thing. Both were replaced along with the bearings for the pole that spins in place. All is working good. Thanks, the wing does complete it. 👍
Very impressed by your work. U can easily work in a custom shop. You are detailed orientated. Great job.
Nice job. I'm not certain where you live but I'm concerned about leaving those holes unfilled. The car may spend much of its time in the garage, but you can get caught in the rain while you're out, then you'll water issues in the trunk. I'm impressed with the 4 car garage. Found the video educational. Thx
I will fix the holes myself. Just some simple body work and re-stripe. None of the center pieces I found to cover up look good to me. Thank you for watching.
Gorgeous and works on her own car 😍
Nice choice..... I bought the same spoiler, it looks beautiful in my car👍
Thank you. What car do you have? Either way it must look great 👍
Woman.Driven I have a mustang fastback 2016 😉
My soul hurts seeing the trunk getting drilled, but anything to make the beast lookin good 💪 good video though.
I give a lot a respect that you done it yourself 🙌🙌💕💕
Thank you. It was a challenge but I got it done.
Beautiful!!! ....oh..the car looks great too! I think. Barely noticed it
😂👍
We all appreciate the good view of to beautiful rearends. An good job on the install of the spoiler
Looks brutal with the spoiler! But you should have put some paint on the edges of those fresh drilled holes :)
Love how clean everything looks in your garage entirely must lots of work , not worried about the finger prints, however, didn't like the dusting of the metal shaves with your hands across the paint not safe for you or the paint. Sorry obsess about paint finishes lol, but great video.
I caught myself after the first few times. After that, I just blew them off. I will have to polish my trunk anyways. I have some light scratches due to the pulling of the spoiler 😅
Let them haters hate beautiful, ...your doing an amazing job.
Thank you.
Came out well. Definitely completes the rear of the car
I'm making my rounds. Another great video
Thank you!
I injoyed watching your video on this install! 👀
Thank you for watching. I appreciate it.