Cool video, Dave! I recommend storing your PTO shafts separated. All it takes is a little moisture to start rusting the two halves together and then you really will have some content getting them apart. Also, sounds like there's a bad bearing or two on the "new" finish mower. I look forward to seeing more vids on this piece.
Good morning The power take-off must rotate at the right speed with the expected engine speed (+/-1000 rpm) after selecting the appropriate speed (forward or reverse) then the tool obviously does not rotate fast enough and does not cut anything at all, you should make adjustments the performance will be better.👍
definitely a good mower and I agree with you totally whenever you can keep your machine clean you should, after all you are investing a lot of money into the machinery, I also think some painting to, I realized this at the wrong time of the year but I'm just saying always try to make your machines look clean and presentable especially if you are doing customers yards they look at your machinery and judge you that way to. Awesome job Dave I like this video
I used a 6' finish for a while. Decided I was better off with a belly mower. Too awkward trying to mow grass with it stuck off the rear end like my bush hog. Nothing in the woods or field to worry about hitting with the hog. Too many obstacles trying to mow with the rear finish. Sure gave my neck workout looking back all the time,
hey turkey you dont use finishing mower to mow long grass with rocks and junk in it ,,,,,,,,,,,the orange slasher is made for that and a lot cheeper to fix,,,,finishing mower were built to mow grass
I like finish mowers for firmer ground. They don't do all that well in the sandy soil around my place because the deck is pretty heavy. The deck itself should last you forever! The spindles...not so much. I believe that deck has removable spindles so you can change out the bearings.
Great. Now I want one. Would really make my lawn look better than the clumps the brush hog leaves behind. I dont know how you keep finding these deals. A tilt Equipment trailer for 1200 bucks. You just kerp finding great deals. On another note. I can picture you adding a nice two or three car garage on the right side of your house. A breezeway or a small 10 X 18 foot room. Then your garage. You can angle it too. But just make sure you put a nice game room or man cave above it. I can see it.
The guy that sold me the international tractor I was using also sold me this finish mower and trailer, by the way the tractor was a $1000 with the brush hog, and yes that the plan a breeze way and garage
I remember that video and at the time told you I was envious of you. I've past by there myself. But like you said. You have to be in the right place at the right time. Looking forward to the restoration of the trailer. You sure have plenty of stuff to work on, in future video's. Keep it up!
Good score Dave .
Open that you're all right up, man, make it look like a nice big field. I love your house.
Thanks,
Sounds like some bearings are on the way out. Looks pretty clean though.
No there just loud.
Cool video, Dave! I recommend storing your PTO shafts separated. All it takes is a little moisture to start rusting the two halves together and then you really will have some content getting them apart. Also, sounds like there's a bad bearing or two on the "new" finish mower. I look forward to seeing more vids on this piece.
Thank you for sharing, great job👍👍👍👍
Good morning
The power take-off must rotate at the right speed with the expected engine speed (+/-1000 rpm) after selecting the appropriate speed (forward or reverse) then the tool obviously does not rotate fast enough and does not cut anything at all, you should make adjustments the performance will be better.👍
It cut nice
definitely a good mower and I agree with you totally whenever you can keep your machine clean you should, after all you are investing a lot of money into the machinery, I also think some painting to, I realized this at the wrong time of the year but I'm just saying always try to make your machines look clean and presentable especially if you are doing customers yards they look at your machinery and judge you that way to. Awesome job Dave I like this video
Helps to make your life a bit nicer around the property.
It’s got a very nice ride compared to the zero turn, my back was a lot happier
Looks great nice find
Looks great...good luck with it too
Looks like you got a good deal and seems to work pretty well.
I paid $550 for it, it was a great deal
Awesome deal on the trailer!
Yeah, it needs some work but it was a great deal
Nice one buddy I like it is better than my one, just have to keep an eye for the stones blades don't like stones aider than that is happy days.
Looks useful!
It’s definitely nice,
Woods makes some nice equipment. That is an unfortunate wet spot you have to deal with, grass makes it appear frequent enough to need remedying.
I used a 6' finish for a while. Decided I was better off with a belly mower. Too awkward trying to mow grass with it stuck off the rear end like my bush hog. Nothing in the woods or field to worry about hitting with the hog. Too many obstacles trying to mow with the rear finish. Sure gave my neck workout looking back all the time,
Like the new mower Dave but for tall grasse the bush hog is better .and no no big rocks ,
hey turkey you dont use finishing mower to mow long grass with rocks and junk in it ,,,,,,,,,,,the orange slasher is made for that and a lot cheeper to fix,,,,finishing mower were built to mow grass
I didn’t know the rock was there,
I like finish mowers for firmer ground. They don't do all that well in the sandy soil around my place because the deck is pretty heavy. The deck itself should last you forever! The spindles...not so much. I believe that deck has removable spindles so you can change out the bearings.
Great. Now I want one. Would really make my lawn look better than the clumps the brush hog leaves behind. I dont know how you keep finding these deals. A tilt Equipment trailer for 1200 bucks. You just kerp finding great deals. On another note. I can picture you adding a nice two or three car garage on the right side of your house. A breezeway or a small 10 X 18 foot room. Then your garage. You can angle it too. But just make sure you put a nice game room or man cave above it. I can see it.
The guy that sold me the international tractor I was using also sold me this finish mower and trailer, by the way the tractor was a $1000 with the brush hog, and yes that the plan a breeze way and garage
I remember that video and at the time told you I was envious of you. I've past by there myself. But like you said. You have to be in the right place at the right time. Looking forward to the restoration of the trailer. You sure have plenty of stuff to work on, in future video's. Keep it up!
I thought while you’re washing it you might of lifted it up and washed underneath and checked the blades after your dad hit those rocks!👍
Awesome video. There's gotta be a bad bearing or something in there making that noise.
Looks like a great finish mower but not a good substitute for a brush hog.
Yeah the blades won’t hold up if your brush hogging,
Thank you very much for the video. 👍🤗👍🇸🇯
Your welcome
Woods top of the line JD green finishing deck nice how much Dave??
$559
I paid $550
@@Dumpster_Dave damn stole it Dave good for you!!
You know Dave, I think it’s time to bring back frosted tips and your just to guy who can get the movement off the ground! #BBFT
Lmao 🤣
Im really suprised that tractor doesnt have a live pto..
👍
Dave is that wetland or a septic field that is all muddy?
I don’t have a septic field, just in desperate need of drainage 😂
have you a pto gear lever? Looks like it's in ground drive if you're reversing up and it stops when you do, whereas you kinda want it to still spin
The tractor doesn’t have a live PTO
@@Dumpster_Dave oh that kinda sucks
👍👍
Dave Its COOL Video
A mower from Finland
You should check the oil in the gear box kinda noisy
I did check it, the fluids were done right before I got it
what a bargain $1500 for that trailer
$1200
haha even better mate... well done, how much was the finisher >=???@@Dumpster_Dave
what a bargain either way..... looks like a great trailer, i look forward to the video
72in but a 50in ZTR is still faster and leaves a better cut.
50” is way to small
12:22 Hey, they need one of them, a Heritage RD72” Finish Mower for biden's swamp.
Lol
Non taglia.
Sorry but not one of your best efforts