I am broke, like ready to declare bankruptcy broke, but I hope one day to be able to buy your master class to say thank you. For now, I will just continue watching the ads in the hope that it helps you in some small way. You are so easy to understand. Your instructions are so clear. I can't thank you enough.
@@nikitamiroschnichenko560 you put the object somewhere on the perimeter and move center of rotation (of the 'rotate copies' effect) to the center of circle
I have been an Inkscape user for years and sort of consider myself an experienced user but I am always amazed about how I keep learning new tricks over and over again watching your videos, Nick. Sometimes I do know how to accomplish the same results but rarely as easily - or nearly as accurate - as with your methods. Thanks for your awesome videos and keep them coming!
3:13 If you need something other than 15°-increments (e.g. you want 10 copies at 36° steps), the Rotate tab in the Transform panel also respects the offset rotation centre. So basically after you have set up the centre and typed in the correct rotation angle, hit CTRL/D to make a copy, then click Apply to rotate the copy, CTRL/D and Apply again to rotate the copy of the copy, and so on until you complete the circle.
I can't believe I just found such a good tutorial on exactly what I want to do. I only heard of Inkscape about five minutes ago! Excuse me while I go download it ...... I'll be back ..... probably a lot.
Can never get enough of your tutorials. Your teachings have proved invaluable in my own upcoming project, and it seems you've stepped up your video game as well. Can't wait for the next one.
2020.11.03 - 15.04'.45'' SUPER! P.S.: Whenever I hear the vignette music coming, I already know that a good thing is coming. It reminds me of my childhood days in the 60s! When I saw LOTS of cartoons!
Love your videos and starting to feel more confident with using Inkscape. It's to the point where I'm saying your next move before you do it lol can't wait to start putting my designs to use!
From what I notice, only if you are holding the left click on the object is that the spacebar stamp will work. If you just have the object selected, but no mouse down event (clicking and holding) on it, no stamps are made.
Again a very informative video. Despite these showcase videos demonstrate us what is possible with Inkspace, I want to learn more. That's why I am right now enrolling your Design and also Inkspace courses. Thank you for the awesome content.
Great tutorial as always, thank you. Just made a peacock feather ring. I find them very complementary to your masterclass. It's easier to search for a precise action on youtube and grasp it in seconds once you've acquired all the fundamentals in the masterclass.
there is an arrange command. First, to create a leaf, 1. use pencil and ellipse shape to draw one(or whatever) second, align, 1. keep pressing ctrl+d to copy the leaf until you are tired 2. select all leaves, goto object -> arrange, under rectangular grid, make them stack into either one column or one row, and adjust corresponding row spacing or column spacing, basically you want leaves to line up 3. group the leaves temporarily 4. create a circle with the radius of the alignment 5. put the circle at the center of the leaves lineup group, turn on snap object center to help 6. select all objects, and go to object -> arrange, under polar coordinate, 6.1. since now the circle and the leaves group has the same center, choose either objects' bounding boxes or objects' rotational center, 6.2. set arrange on last selected circle(or the first selected), 6.3 you might want to check the rotate object option 6.4 now click arrange and voila, you have leaves line up around around the circle perfectly
Absolutely loved the video. I’m wanting to learn how to create simple patterns for wallet making that I can use to cut on a laser. I would be creating a basic rectangular design with rounded corners and adding a pocket at either end and then stitching holes that would line up with both the main panel and the pocket. My question is, do you already have a video(s) that you would suggest just showing those basic things or even better one specific for that? Subscribed! Thanks
Hi Nick, congratulations for you amazing tutorial... could you please link or somehow reference the tutorials that you mention at the beginning of your videos? am struggling trying to find this one with the "transform+paste" in your portfolio with no luck... Thanks!! 😀
Hi Nick, how to arrange random objects in as tight as possible but with spacing, i will use it to cut individual pieces of the objects so they will occupy a minimal space of material as possible
Awesome Nick!! Your tutorials are so refined and on the point that it makes me believe as if I already know how to do it (Even though I haven't thought of it). I have been following your tutorials for years and your way of Explaining ways has influenced how I teach others in real life. Thank you for your awesome tutorials.
Can you make a video showing us how to make an esports character, I have been having a lot of trouble making one, It would be great if you made a tutorial!!!!
so what if i want to replicate a specific number and the same size i want to replicate in a bigger circle same quantity but spaced out as it's the same size? am i making sense? this tutorial was awesome...i've subscribed....will check if your other tutorials answer my question. thanks
I use Inkscape right now for logodesign, but thinking of going to illustrator. Are there some advantages using illustrator instead of Inkscape, when designing logos? What do you think? 🙂
Hello Nick, I am a regular viewer of your channel..I have a video idea for u. " CREATE A 3D EBOOK MOCKUPS/COVER IN GIMP/INKSCAPE " if u make a video on this I will be more than happy..😄
If I create visiting card and in coral draw in print preview we can click 24 cards at a time by just clicking and also cut mark auto..is any possibility in this software.. thanks
Are you using a Mac? I learned Inkscape because of your awesome videos. I now I have an iMac and since updating to the 1.01 version it’s horrible. Super slow and laggy, takes me for we to create one design! Any suggestions? I’m running Catalina version 10.15.7
yes... the compatibility of inkscape is bad especially for mac in the new update. it work better in windows and run perfect in linux. you can use the older version of inkscape like version 0.92 or 0.95. inkscape.org/id/release/0.92.2/mac-os-x/ inkscape-manuals.readthedocs.io/en/latest/installing-on-mac.html
Hi nick, do you know how to pull text or images from a CSV and create multiple images from a template for POD designs. (with Inkscape, gimp, or affinity). Many thanks
Is there a way to have an image stamped around a circle and have the image rotate a certain number of degrees as each images progress around the circle effectively making a Phenakistoscope ?
I am broke, like ready to declare bankruptcy broke, but I hope one day to be able to buy your master class to say thank you. For now, I will just continue watching the ads in the hope that it helps you in some small way. You are so easy to understand. Your instructions are so clear. I can't thank you enough.
in new inkscape you can also use path effect 'routate copies'. it's non destructive and you can set any number of copies around given point.
Thanks! I just wanted to ask how to evenly space n objects
But how can you do it around the circle?
They rotate around themselves
@@nikitamiroschnichenko560 you put the object somewhere on the perimeter and move center of rotation (of the 'rotate copies' effect) to the center of circle
@@olaff667 ok,thanks
Teach me
Magic again Nick.
You are an excellent communicator and we really appreciate the work you put into these tutorials.
I have been an Inkscape user for years and sort of consider myself an experienced user but I am always amazed about how I keep learning new tricks over and over again watching your videos, Nick. Sometimes I do know how to accomplish the same results but rarely as easily - or nearly as accurate - as with your methods. Thanks for your awesome videos and keep them coming!
me too... Great job Nick.
3:13 If you need something other than 15°-increments (e.g. you want 10 copies at 36° steps), the Rotate tab in the Transform panel also respects the offset rotation centre. So basically after you have set up the centre and typed in the correct rotation angle, hit CTRL/D to make a copy, then click Apply to rotate the copy, CTRL/D and Apply again to rotate the copy of the copy, and so on until you complete the circle.
Game changer. Big thanks
Thanks
Thanks for that, perfect!
I can't believe I just found such a good tutorial on exactly what I want to do. I only heard of Inkscape about five minutes ago!
Excuse me while I go download it ...... I'll be back ..... probably a lot.
Can never get enough of your tutorials. Your teachings have proved invaluable in my own upcoming project, and it seems you've stepped up your video game as well. Can't wait for the next one.
Nick you an excellent presenter and a gift to your generation, many thanks as this is priceless
Thank you so much Nick, I am learnig a lot !! I don't speak english but I can understad that you teach us. hugs from Colombia, you are the best
2020.11.03 - 15.04'.45''
SUPER!
P.S.: Whenever I hear the vignette music coming, I already know that a good thing is coming. It reminds me of my childhood days in the 60s! When I saw LOTS of cartoons!
I'm a woodworker, and this little trick makes it super easy to make clock faces. Thanks!!
I love inkscape more than illustrator because u the best teacher for inkscape ❤
حبيبي واللة
Very good video . I follow you . I'M a kid of 14 years and I make inkscape from your video. Love you from India👌👌👍👍
Love your videos and starting to feel more confident with using Inkscape. It's to the point where I'm saying your next move before you do it lol can't wait to start putting my designs to use!
Such a good channel. your tutorials are always so clear and easy to follow! thank you
The thumbnail is very high quality looking, wowi. Thanks for the vid
Thanks Nick, It is always interesting to follow your tutorial.
This is a superior method to the commonly cited "Pattern along path" tool and the "Scatter" tool.
From what I notice, only if you are holding the left click on the object is that the spacebar stamp will work. If you just have the object selected, but no mouse down event (clicking and holding) on it, no stamps are made.
THANK YOU! Was going nuts.
Again a very informative video. Despite these showcase videos demonstrate us what is possible with Inkspace, I want to learn more.
That's why I am right now enrolling your Design and also Inkspace courses. Thank you for the awesome content.
Dang, this opens crazy doors for me. Thank you so much for sharing.
Perfect. You teach really well.
Great tutorial as always, thank you. Just made a peacock feather ring. I find them very complementary to your masterclass. It's easier to search for a precise action on youtube and grasp it in seconds once you've acquired all the fundamentals in the masterclass.
I like this method. Thanks, Nick.
Never seizes to amaze me
👍💕 Your videos are so great! You always make them so easy to follow and understand. Thank you and please keep making videos.
This is a super useful tutorial, I never knew about the snapping to the centre button.
Awesome information!!
Thanks nick. This is amazing.
Please add more simple and tiny trick Like this.
The great command "repeat" in CorelDraw is great, but this technique is good too.
there is an arrange command.
First, to create a leaf,
1. use pencil and ellipse shape to draw one(or whatever)
second, align,
1. keep pressing ctrl+d to copy the leaf until you are tired
2. select all leaves, goto object -> arrange, under rectangular grid, make them stack into either one column or one row, and adjust corresponding row spacing or column spacing, basically you want leaves to line up
3. group the leaves temporarily
4. create a circle with the radius of the alignment
5. put the circle at the center of the leaves lineup group, turn on snap object center to help
6. select all objects, and go to object -> arrange, under polar coordinate,
6.1. since now the circle and the leaves group has the same center, choose either objects' bounding boxes or objects' rotational center,
6.2. set arrange on last selected circle(or the first selected),
6.3 you might want to check the rotate object option
6.4 now click arrange and voila, you have leaves line up around around the circle perfectly
I was just saying why nick is not uploading any tutorials and BOOM then I got the notification!
I'm so happy I found your channel, yet sad I didn't find it sooner. But still incredibly happy :D
Always the best information out there. Thank you.
2:11 "Hold SHIFT and click on it". Thankyou, I was boring to manually CTRL-X and sert "0" in inkscape:transform-center-[x|y]. Thankyou!!!
Wow, I learned about 2 dozen things! Thanks!
Saw logos by nick notification had to check that out fast
Excelente tutorial, muchas gracias amigo
Bro your channel is awesome
Now have just subbed you and make type of tutorial for us
Keep it up
You are amazing, thanks for all tutorials 👌🏻
Wow ! We need more tutorial.
Love this. Simple and beautiful
I like your tutorials a lot!
so cool, thanks nick
This is so awesome! Thanks for the explaination!
didn't mention leaf once. respect.
Shift+click to re-center...! Oh thank you! 👍👍
Fantastic! That is so neat! Thank you.
awesome as always!
Thank you again! You have very useful videos!
Thank you Nick ❤️
Absolutely loved the video. I’m wanting to learn how to create simple patterns for wallet making that I can use to cut on a laser. I would be creating a basic rectangular design with rounded corners and adding a pocket at either end and then stitching holes that would line up with both the main panel and the pocket. My question is, do you already have a video(s) that you would suggest just showing those basic things or even better one specific for that? Subscribed! Thanks
O.K. Now this is something I did not know about... Thank you so much!
Thanks a lot Nick
Thank You, Sir, ❤️🌸❤️
Hi Nick, congratulations for you amazing tutorial... could you please link or somehow reference the tutorials that you mention at the beginning of your videos? am struggling trying to find this one with the "transform+paste" in your portfolio with no luck...
Thanks!! 😀
Real informative and pro tutorials. THNX!
I was wondering if you could make a tutorial on how to draw mandalas/
Thanks Nick!
Very useful information!
you know any best free screen recoder laptop sir
Tnx
Hi Nick, how to arrange random objects in as tight as possible but with spacing, i will use it to cut individual pieces of the objects so they will occupy a minimal space of material as possible
Thank you very much.
Thanks
Great video again!!!
Blow mind!! thanks bro
Love this channel
very smart
Nice work
thank you
Thanks nick 🙏
brilliant thank you
Fabuloso, gracias
Awesome Nick!! Your tutorials are so refined and on the point that it makes me believe as if I already know how to do it (Even though I haven't thought of it). I have been following your tutorials for years and your way of Explaining ways has influenced how I teach others in real life. Thank you for your awesome tutorials.
Cool! Thanks a million man!
Thanks a lot
Can you make a video showing us how to make an esports character, I have been having a lot of trouble making one, It would be great if you made a tutorial!!!!
so what if i want to replicate a specific number and the same size i want to replicate in a bigger circle same quantity but spaced out as it's the same size? am i making sense? this tutorial was awesome...i've subscribed....will check if your other tutorials answer my question. thanks
I use Inkscape right now for logodesign, but thinking of going to illustrator. Are there some advantages using illustrator instead of Inkscape, when designing logos? What do you think? 🙂
better using illustrator for work in studio or company. but in home inkscape or illustrator just same.
ThankUUuuuuuuuuuuuu so much
Can do a tutorial on how to create symmetrical Mandala in Inkscape?
I really want to create my own fonts. Can I do that in Inkscape? Are there any Inkscape tutorials that you would suggest for creating fonts?
Thank you nick you are the real hero.
wow!! This game change for vid Thanks man
God send!
Hello Nick, I am a regular viewer of your channel..I have a video idea for u.
" CREATE A 3D EBOOK MOCKUPS/COVER IN GIMP/INKSCAPE "
if u make a video on this I will be more than happy..😄
very helpful ty.
is there a way to animate image[or vector image] sequence frame by frame or to review it ??
The thing I cannot find those options (tool) at to top of ur screen... How to enable them
If I create visiting card and in coral draw in print preview we can click 24 cards at a time by just clicking and also cut mark auto..is any possibility in this software.. thanks
Are you using a Mac? I learned Inkscape because of your awesome videos. I now I have an iMac and since updating to the 1.01 version it’s horrible. Super slow and laggy, takes me for we to create one design! Any suggestions? I’m running Catalina version 10.15.7
I'm using Windows. Version 1.0 has been laggy for me too. I've been using version 0.95 for my day-to-day design work and 1.0 for recording tutorials.
yes... the compatibility of inkscape is bad especially for mac in the new update. it work better in windows and run perfect in linux. you can use the older version of inkscape like version 0.92 or 0.95.
inkscape.org/id/release/0.92.2/mac-os-x/
inkscape-manuals.readthedocs.io/en/latest/installing-on-mac.html
PLEASE!! Do a tutorial of how to do a carrousel for Instagram in Inkscape, thanks!!
I can't seem to find enable snapping on the latest version
Will you ever make toturial on affinity photo and/or design 😁😅
He has though lol
ua-cam.com/video/tksmvr9f17w/v-deo.html
Yup, already am on my other channel: ua-cam.com/users/DesignMadeSimple
@@LogosByNick and what about affinity photo 😅
Amazing tutorial maybe you can take a shortcut key in the screen Nick, thank you
From Indonesia
Hi nick, do you know how to pull text or images from a CSV and create multiple images from a template for POD designs. (with Inkscape, gimp, or affinity). Many thanks
Pressing ctrl will stamp object with 15 degree increment. Is there any way to stamp or copy the same object at any other angle?
Yes if you go into Inkscape Preferences (control + shift + p) I believe you can change the degrees.
Is there a way to have an image stamped around a circle and have the image rotate a certain number of degrees as each images progress around the circle effectively making a Phenakistoscope ?
Can you do a video on how to remove showdows
Pressing control locks the rotation in a 15deg angle.
But what if I want it to be 20deg angle?
😱 you can Shift click center point and and spacebar to duplicate? 😱