Disassemble & taking apart an EPSON printer - What are the parts of an inkjet? Repair/Fix
Вставка
- Опубліковано 24 лис 2020
- We showed how to disassemble an Epson printer and identify parts for repair. Logically, Epson is a two-dimensional machine. The X-axis is controlled by the CR (Printhead Carriage) assembly, and the Y-axis is controlled by PF (Paper Feed) assembly. There are also a couple of sensors helping the printer know what is going on: PW, PIS, PE sensors, three Encoder sensors, and two lever sensors. This video will help you to start playing with an Epson printer.
If you find this video useful, please share it on your Facebook.
For parts, visit our website: www.bchtechnologies.com
For other helpful videos, go to / bchtechnologies
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologies.com/printer-r... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact support@bchtechnologies.com
More support options for your printer device are available at support.bchtechnologies.com
Continue the Conversation: support@bchtechnologies.com
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologies.com
CHAPTERS:
0:01 Intro
0:13 Removing the Printer Case
2:47 The Printer Carriage and Printhead
5:56 Paper Feed Parts
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com. - Навчання та стиль
Sooo close :(. I pulled out 2 parts from back of printer by mistake when trying to pull out to clear a jam (there’s never jammed paper, it just makes me pull part of the back out and push it back in every time I try to print) and have no clue now how these two parts go together or back into the printer. I think this video touched on almost every part of the printer except these. But good video for anyone working on other parts.
Very detailed, easy to understand, thank you!
Thanks so much Kevin. Incredibly helpful video, as all of yours are.
Glad you like them!
Thanks for your professional knowledge and techniques. I have a question. A spring from where the print head sits came off of mines how do I replace it. I was blotting ink from where the print head sits and it popped off.
Fantastic guide, thank you
Thanks man I had tear 3 them down same time your vids definitely helped out
Thanks for the SUPER nice video. GREAT HELP and UNDERSTANDING. Having an epson WF-3520 .. and i suddenly after cleaning printheads i got a 0x9A error... CR encoder has been cleaned, no paper jam-all checked - what sensors should i also clean/check ? thanks
Kevin, your videos are excellent, thank you. I have a question and can't find answer anywhere. I have an Epson ET-2803 and the flat flex cable (awm 5542 80c 60v vw-1 totoku-p) snapped after only using a handful of times. Can you please tell me how to release the clip on left front that is holding the scanner lid in place?
I have an epson ET m1120 ECOTANK. I want to seek the following solution. I would like to replace the inkt inside with special stencal inkt. How could I proceed to remove the existing inkt in the ecotank and fill it with the special stencil inkt?
I think that I should see if i can remove the tank and turn upside down, if possible.
What I have tried so far is insering a seringe to see if i could vacum the inkt out. But the needle wont go through, and I dont want to force it. Any advice and suggestions are welcome.
Good video Kevin! What if you replace the encoder strip and you still have a probem? The carriage goes to the left side, stops, then travels until it makes a screeching sound. restarting the printer does nothing. What Next do I look at??
Kevin, do you have a disassembly procedure for Epson ET-4700? I had to disconnect the cables from the mainboard that connect to the scanner assembly so I could remove the scanner assembly from the rest of the printer. I am trying to reattach the scanner assembly but cannot determine where some of the cables connect to the mainboard. Do you have pictures or drawings of the cable paths to the mainboard or a complete disassembly procedure for this printer? James B.
Amazin thanks Kevin
What is the sponge part called that catches the ink where the rollers at
I have a wf 7720 and my car pulley came off… how can I get it back on. When I place the belt around it. It won’t stay in place, but when it’s off it stays in place
Kevin, your knowledge is exceptional and you are very good at explaining. I had a jame and now see a disconnected wrapped elastic on the left side inside my Epson 2750. Is it possible to reconnect? Or is it dead?
What printer are you working on? What do the CR encoder sensor and CR encoder modules do? I don't remember hearing that explained. This is cool!
Excellent videos you do, my epson et 2760 has blown fuse on board. Code 31006 , do you sell a new board ? Or only repair them?
you are a gift from God.. your video for printer dis assembly is the top I have watched, thank you. But wait .. this makes the error "close ink cartridge cover/034503" a little bit weird since there is no sensor related with that. Can you please give some light on the error? again more power... thank you
Yes. It is at the beginning, after power on, right? The CR is trying to move to the left but is stopped by something. Therefore the printer thinks the cartridge cover is open and caught. However, the problem is more likely underneath.
@@BCHTechnologies yes you are right .. it seems true issue is under the ink pump system which hold sa gears for the initial carriage position, but I could not figure it out ..lol.. anyways more power to you. Your video is really great, can you provide your website link? thanks again.
If you see the pump unit, there is a piece of white plastic. I call it a "switch stick." It controls a switch that determines which nozzle column gets cleaned. The whole unit will raise when the gear is in a certain combination. If your gear is out of sync, the pump unit is not lowered, thus obstructing the movement of the CR. The whole purpose of raising the unit is for the printhead to slide the stick into another slot and press the switch below. If the unit is raised, but the printhead is moving, you will have a problem. Pay attention to exactly when the CR stops on error, and start figuring out what the pump unit's position should be. Then you can back-track and correct the problem.
@@BCHTechnologies thank you very much for the followup answer, yes I noticed that too I called it driveshaft, lol. Anyways I could not figure it out, I have replace the inkpump assembly but it it did not work out. Then I have a solution at that time I transfered the board to a different unit with the head.. now its having CRCM motor error lol. guess no luck. lol.. Again, thank you and more power. Will check your website later.
@@c2sartinkprinthub757 You are welcome. It's an interesting one. I wonder why it has a CRCM motor error.
Thank you very much for this video.
Please, kindly do the same on Epson EP 802A for us.
Can you explain what is pis sensor and why it is used please?
Thanks your look video! Is it possible to fix the error code 0x4D for WF-2661 ? It shows after the forced took out paper sheet from ADF due to the too thick thickness of the paper and seem to be jammed. Can I just cu off the ADF function?
Sir good morning my printer does not feed correctly.. Could you help me how to fix this.. I saw a small spring disattached at the back
Thank you so much. The extent of your knowledge is incredible! You really helped me out.
hello，i wonder if epson ink jet printer wf7621 use same method to be taken apart? And i want to know how to take apart the mainboard of the epson ink jet printer.
Great video. Very detailed. i felt like a pro! I took mine apart bc I did not cover for long time and now full of dust. Thank you making this is was going to get a new printer 🙏
Hi sir can you make another video abut the parts of a brother printer, were having trouble how to fix it specially the scanner. It just stuck and wont scan. I hope you can grant my wish, thank you! Love your videos!
Very informative video, thanks. At 1.35 you say there will be a link to removing scanner but I didn't see one. Did I miss it?
Thanks for pointing it out. I added it today.
@@BCHTechnologies Thanks!
do you have service manual of Epson L5190?
Hello Kevin, I just found your great channel. I am searching for a solution to a no-start problem with my ET-2550 printer after removing, flushing and replacing the printer head. The printer started the boot up process then quit part way through and went dead. The cables are fine and power is to the socket. I tried unpluging and waiting an hour then holding the power button down 10 seconds. No Go. I am stumped as what to do next. I assume it is an electronic failure a short or something but assume there is no fuse. Any suggestion might help. Maybe I managed to kill the mother board some way!
Probably the MOSFT. Check my channel and there is a video for how to test those.
I have Epson WF-7715, problem I am having is it when I print a page it prints that page fine but after that it keeps pulling in pages and throwing them out until it empties the whole paper tray. Don't know what is causing this problem. If there are any papers in the tray and I switch it off it pulls the paper and leave it in the middle then it gets switched OFF. Any help will be highly appreciated.
i am an old service tech looking for ET 5850 Eco Tank ADF Scanner parts. Can you help me find the parts diagram?
sir good day.. have u tried removing the scanner of an Epson L15150? i had to clean it from ants living inside.. thanks so much in advance..
The et 2760 I don't think has repairable fuse? I took board out to look ? I put board back in same error. Maybe better off buying new printer. ??
how to paper pickup assemble replace in epson l1455 please send video
Hi Kevin - I have a Epson WF 7515 - the printer has been unserviceable for a long time but I would like to continue to use the scanner - is it possible to separate the scanner from the printer to use it by itself?
Thank you for subscribing to my channel. No, it's built in one piece. If your printer doesn't have any electronic issues, just physical issues such as dried printhead, you can keep it running and use the scanner.
My printer is not taking the ink and black carriage has leaking ink other wise it a great printer how do I fix it Thank you or anyone that can help
I have printer l6160.. it's showing always paper jam but ther is no paper inside printer. But showing paper jam
Printer Epson tidak bisa di buat print dupleknya kenapa ya
can you make a video on how to remove the pizza wheels? I have seen people talking about that it will still work without them but i wanted to keep a few of them but remove most of them cuz im sick of pizza wheel marks. But i cant find a video on how to remove them.
Will do soon.
@@BCHTechnologies thanks alot ! it would be so helpful for me and others like myself who ive talked to. :) thanks again.
Also please let me know when it is up, also if/when u post it i would be happy to Donate if u have a channel or a product page i could buy something, to thank u for ur time in making the video.
Can't understand him