Thank you, Richard, for your expertise and taking the time to share. Your clarity and knowledge are a gift. I recently changed the brakes, struts, and controls arms on my '09 Altima, and was quite discouraged to find these same lights on after I had put the wheels back on and started the car. I haven't investigated yet, beyond my Amazon OBDII sensor that connects with my iPhone (which has responded with no error codes-- I don't believe it checks for ABS, even though the iPhoneApp says it does) but this video at least gives me a starting point, where I was clueless at first, and thinking I'd have to take off all the tires again and sit there staring at it wondering. So thank you again, these several minutes of effort 3 years ago from you have helped a tremendous amount of people!
A similar thing can occur when your engine light comes on. If the computer detects an engine problem that can degrade performance it will automatically shut down things like AWD, ABS and Traction Control for safety reasons. The last time I had a vehicle come in like that it was caused by a faulty O2 sensor.
I have 2011 Nissan rogue all this lights come on plus the brake and check engine after I start driving . Brakes and tires was replaced in 2020 and I just had front in work done the control arm was replaced . My car has recently been checked by a Nissan dealer and regular repair garage back in October and past the Ny inspection. Now this is happening what could be the cause and is this something they would have seen . Thank you in advance.
It is difficult to diagnose a problem from afar. However I had a rogue come in with a similar situation. It turned out to be faulty variable valve timing solenoid. When the cars computer recognizes degraded engine performance it sometimes will shutdown traction control causing all those lights to come on. Have someone with a scan tool run the codes. Keep in touch.
I have a 2009 Nissan Rogue with all those lights on. The AWD light is off when i start it up but as soon as i hit 15mph it comes on. I just had my brakes done due to the wheels starting shaking when hitting the brakes they needed a complete brake job along with the Rotors too. He tried the left sensor to make sure it was plugged in all the way an it was. I told him what you video said that it could be the sensor to the wheel he used his code reader an it came up with a code I don't know what it showed. He hasn't gotten back with me on what the code meant. Do you have anything else it could be if not the sensor? The shaking of the wheels stopped somewhat with the brake job. It still does but just not as bad.
The wheel should not continue to shake especially after replacing the rotors. Not being there to see what he did or how he did it I really cannot comment further other than to say there may be something else going on with the front suspension. I had a 2016 Rouge come in recently, it had a similar problem with all those lights popping on after driving just a few minutes. It had nothing to do with the brakes. It was a bad Variable Timing Solenoid in the engine. When a car's computer detects degraded engine performance due to a bad sensor or some other problem it will shut down many of the car's safety features such as AWD, ABS and Chassie Control. I think the manufactures reason for doing this is if the engine is not running properly then perhaps the safety controls will not function properly as well. There were 4 of these solenoids on the engine, all were replaced, after everything returned to normal. Stay in touch let me know what happens.
@@richardspaulding5035 I had a scan done to see what is causing all the lights to be on in the dash. Here is what showed up. PO448 Ven Control Valve for the Power Train System, code (C1107) ABS Function Enabled Input Circuit Failure, Code(1104) Brake Bedding Mode Thankfully I have Carshield on my car an they will pay for all the repairs needed.
Hi, the same thing is happening with my car. Was driving and all the lights in the video came up and eventually had to pull over as the car wouldn’t let me accelerate. I recently had my break pad & disk changed just the week before, could my problem be the same as yours? Eventually the battery light came on soon after.
Sounds like your car went into limp mode. it may be a problem with the engine or transmission. I don't think the issue has anything to do with the brake work. When you PCM detects a problem it also will shut down those systems. You need to run an OBD2 scan tool. It may be something simple. last time that happened to a customer it was simply a O2 sensor had gone bad. let me know what you find. Thanks for watching.
It ended up being a faulty alternator, apparently the alternator was sitting too high & was too powerful, does that sound right? We’ve recently changed mechanics so I’m just double checking 😀
@@elenoafagalei2550 Thanks for getting back to me. I have never herd of an alternator being installed too high. They can only be installed one way unless at some point the wrong belt was used. However it is possible that the regulator which is now built into the alternator these days was faulty and was over charging the battery. This would cause lots of problems. The bottom line is what ever your mechanic did it fixed the problem. Thanks for watching my channel.
I’m having the exact same problem with my Nissan max 09 I was driving and right before the highway I tried to accelerate and the car did a lil jerk and wouldn’t let me go pass 1st gear. Any tips on what’s wrong
It sounds like my car is having the same problem , I just wanted to know did it give you any codes such as transmission or vehicle speed sensor codes ?
You know it does not make sense, however a couple of years ago where we buy our gas they happened to be out of regular, so we put premium in our Nesan. A day or so later the car started hesitating and the engine light came on. I wound up having to replace the crankshaft sensor. I thought it just a coincidence at the time and I still do. It just seems strange that would occur. If your engine light came on at the same time as the others, you may just have a bad sensor. If the computer detects degraded engine performance, it will sometimes automatically shut down ABS and traction control. I had a Toyota come in a few years ago with all the lights on similar to your situation. All it was, was a bad oxygen sensor. Once I replace it all the lights went out. Go to one of those auto stores that advertise running a free scan and see what pops up. Let me know what they find.
This morning the same thing happened to me. The lights came on but the car drives normally and I can fell the traction is off and the awd aren't engaged when in heavy snow. Theyll be off for a bit when I shit the car off but will turn on after driving for few minutes. Does it sound like abs? I changed my tires last over a year ago so I dont see how the abs sensor could been affected
Is your engine light on as well? You may have an issue with your engine. if the cars computer detects degraded engine performance it will sometimes shut down the traction control, abs etc. I had a car come in with those lights on and it turned out to be a bad O2 sensor. Another time a car came in with similar issues and it was a bad variable valve timing solenoid. Recently I had a car with those lights on and it was the crank shaft sensor. The point I am making that it is not necessarily a problem with the abs or brakes.
I have a 2010 it’s only got 68k on it so mine has drivers rear sensor error this would be why my lights same as yours is all on my wife had a flat on front and we had put spare on that’s when it all started I hope this sensor on rear fixes mine I have no other codes in it but abs rear sensor so I’m going to try and see if I can clean it and hope all my lights go off
Please by all means let me know in another comment what you found and what you did to fix it. Seems very weird that you changed the tire in the front and then a problem surfaced in the back. However over my many years I have seen stranger things. The last time I had a problem with a rear ABS sensor was when the wire came free of the retainer and rubbed the tire until It wore thru. Good luck and thanks for the comment and watching my channel
Hi, I have a 2010, code read front passenger side ABS sensor. I replaced both of them. Now while the car is idle, no lights show. When I drive it and press the brake pedal, ABS engages on the passenger front, I know because you can feel it. Then all of the those lights come on except the check engine light. I 1st bought cheapo Amazon sensors and it did the same thing. Was told to chuck the cheap ones and get OEM from Nissan. I bought a OEM front set and it still does the same thing. Once the car turns off and you restart it, all the lights are off but hit that brake pedal and boom, ABS engaged and lights back on. I GIVE UP
Have you run a scan tool on the engine? If the computer detects degraded engine performance, it will sometimes shut down the abs system. I had a Toyota in with a bad O2 sensor and the abs lights on. Once I replaced it the lights went out. Most shops have a nominal fee for diagnosing a problem. Then you can go on UA-cam and find out what is involved in making the repair
It could be any number of problems. I would not dare speculate without seeing it. I suggest taking it to a dealer or local repair shop and pay what ever they charge to diagnose the problem. Usually it is between $75 to $125. Once they tell you what is wrong then you can make a decision if you feel like you can fix it yourself or have them do it. Many shops will credit back the diagnoses fee if you have them do the work. let me know what you find. I had a car in my shop recently that was shaking all over the place. It turned out to be simply a bad tire. Thanks for taking the time to place a comment and thanks for watching my channel.
That means the AWD is locked ON and the axles are fighting themselves while you’re driving. The shaking is the axles LOCKED while the wheels are turning…not GOOD!
What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?
Thanks for the question Edwin; I have never seen that and I could not find any information on that problem. One thing you could try is resetting the cars computer. Simply disconnect both the negative and positive terminals from the battery. (Always disconnect negative first). Then carefully touch them together for a few minutes. Do not let them touch any other part of the car while you are doing this. Then reconnect the terminals (This time reconnect negative last). let me know if it helps.
Yes, it was the ABS sensor. It has been a couple of years since making the video. I don't have time right now to watch it but as I recall after making a repair, I think it may have been a ball joint I did not get the plug that goes to the sensor all the way clicked it.
I have a 2011 nissan frontier and when I got my new tires put on when I went to leave the brake abs vdc off and slip lights came on all at once. After some research I topped off the brake and power steering fluids and reset my ecu. They went out for almost a year until last week they came on out of nowhere again only a reset won't clear them this time 🤷🏼♂️🤷🏼♂️ vehicle don't perform ANY different so I dunno
It is interesting that this all occurs at about 15 miles per hour. that is about when the control unit would typically detect a problem. If you have not already, find a OBD2 tool that can read ABS codes as you may have a bad wheel sensor or defective ABS module. These may be dumb questions but are all your tires the same size? Are they all inflated to the correct PSI? Does the car go down the road smoothly, perhaps a bent rim or damaged tire? I don't remember if you mentioned it but is your brake light on as well. Are you loosing fluid? I did the brakes on a Honda last year. It came back a few months later with one of the new calipers I installed leaking. If you are familiar with my channel it is intended to serve the back yard guys of the world. For the most part I use tools that the ordinary guy could reasonably expect to have. What I am trying to say is over time we save a tremendous amount of money by working on our own cars. However there will indeed be times when we just have to bite the bullet and take it to a dealer. Good luck and thanks for watching my channel.
@@richardspaulding5035 hey thanks buddy yea I always do my own work as much as I can at least lol obviously there's times you just can't. Far as tires they all same size. Proper psi etc, brake fluid seems level, I had the mechanic at my work run diagnosis on it and he has to research some of the codes and said he'll get back with me. Ill let you know his findings
@@richardspaulding5035 hey richards, so my mechanic buddy is awaiting results still, guess they forgot to pay the miller bill, (their diagnostic people) however just wanted to give you a update, I had to work overnight last night so I left my truck parked at work and took my work truck and trailer home, yes the temps dipped into the 40s here in FL (not that that made a difference) but get this, I get into my truck and let it run for a few mins while transferring all my personal stuff into my personal truck, well I go to drive off and pull out onto the main road and proced to get up to speed, only this time, ready? The lights never kicked on...... WTH?! Lol why it happened I have NO idea I literally did nothing to it. Will still post whenever he gets the read results back. Just wanted to share this bizzare occurrence
@@richardspaulding5035 oh yea one more thing, last weekend I changed my oil, and maybe put on 5 or 10 miles since I changed it. Dunno if that had ANYTHING to do with it going off but 🤷🏼♂️ I've heard in the past this could happen if the oil was low?? I dunno
There have been more than 22,000 views on that video. You sir are the very first negative comment recived. Perhaps you should remain as the name you so appley selected.
You're a good mechanic and 5 stars. I'm a goldsmith, and mistakes happen. What makes a man a man is living up to them, everyone's happier that knows 'We all make mistakes".
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Thank you, Richard, for your expertise and taking the time to share. Your clarity and knowledge are a gift. I recently changed the brakes, struts, and controls arms on my '09 Altima, and was quite discouraged to find these same lights on after I had put the wheels back on and started the car. I haven't investigated yet, beyond my Amazon OBDII sensor that connects with my iPhone (which has responded with no error codes-- I don't believe it checks for ABS, even though the iPhoneApp says it does) but this video at least gives me a starting point, where I was clueless at first, and thinking I'd have to take off all the tires again and sit there staring at it wondering. So thank you again, these several minutes of effort 3 years ago from you have helped a tremendous amount of people!
Thanks for the kind words, Let me know what you discover.
Nice job. I did not have any idea of where to start. Thank you.
A similar thing can occur when your engine light comes on. If the computer detects an engine problem that can degrade performance it will automatically shut down things like AWD, ABS and Traction Control for safety reasons. The last time I had a vehicle come in like that it was caused by a faulty O2 sensor.
Thanks my friend. You solved my problem
LOL, I am glad my you found my mistake helpful.
Thanks for sharing
Thank you for watching.
I have 2011 Nissan rogue all this lights come on plus the brake and check engine after I start driving . Brakes and tires was replaced in 2020 and I just had front in work done the control arm was replaced . My car has recently been checked by a Nissan dealer and regular repair garage back in October and past the Ny inspection. Now this is happening what could be the cause and is this something they would have seen . Thank you in advance.
It is difficult to diagnose a problem from afar. However I had a rogue come in with a similar situation. It turned out to be faulty variable valve timing solenoid. When the cars computer recognizes degraded engine performance it sometimes will shutdown traction control causing all those lights to come on. Have someone with a scan tool run the codes. Keep in touch.
I have a 2009 Nissan Rogue with all those lights on. The AWD light is off when i start it up but as soon as i hit 15mph it comes on. I just had my brakes done due to the wheels starting shaking when hitting the brakes they needed a complete brake job along with the Rotors too. He tried the left sensor to make sure it was plugged in all the way an it was. I told him what you video said that it could be the sensor to the wheel he used his code reader an it came up with a code I don't know what it showed. He hasn't gotten back with me on what the code meant. Do you have anything else it could be if not the sensor? The shaking of the wheels stopped somewhat with the brake job. It still does but just not as bad.
The wheel should not continue to shake especially after replacing the rotors. Not being there to see what he did or how he did it I really cannot comment further other than to say there may be something else going on with the front suspension. I had a 2016 Rouge come in recently, it had a similar problem with all those lights popping on after driving just a few minutes. It had nothing to do with the brakes. It was a bad Variable Timing Solenoid in the engine. When a car's computer detects degraded engine performance due to a bad sensor or some other problem it will shut down many of the car's safety features such as AWD, ABS and Chassie Control. I think the manufactures reason for doing this is if the engine is not running properly then perhaps the safety controls will not function properly as well. There were 4 of these solenoids on the engine, all were replaced, after everything returned to normal. Stay in touch let me know what happens.
@@richardspaulding5035 I had a scan done to see what is causing all the lights to be on in the dash. Here is what showed up. PO448 Ven Control Valve for the Power Train System,
code (C1107) ABS Function Enabled Input Circuit Failure, Code(1104) Brake Bedding Mode Thankfully I have Carshield on my car an they will pay for all the repairs needed.
Hi, the same thing is happening with my car. Was driving and all the lights in the video came up and eventually had to pull over as the car wouldn’t let me accelerate. I recently had my break pad & disk changed just the week before, could my problem be the same as yours? Eventually the battery light came on soon after.
Sounds like your car went into limp mode. it may be a problem with the engine or transmission. I don't think the issue has anything to do with the brake work. When you PCM detects a problem it also will shut down those systems. You need to run an OBD2 scan tool. It may be something simple. last time that happened to a customer it was simply a O2 sensor had gone bad. let me know what you find. Thanks for watching.
It ended up being a faulty alternator, apparently the alternator was sitting too high & was too powerful, does that sound right? We’ve recently changed mechanics so I’m just double checking 😀
@@elenoafagalei2550 Thanks for getting back to me. I have never herd of an alternator being installed too high. They can only be installed one way unless at some point the wrong belt was used. However it is possible that the regulator which is now built into the alternator these days was faulty and was over charging the battery. This would cause lots of problems. The bottom line is what ever your mechanic did it fixed the problem. Thanks for watching my channel.
I’m having the exact same problem with my Nissan max 09 I was driving and right before the highway I tried to accelerate and the car did a lil jerk and wouldn’t let me go pass 1st gear. Any tips on what’s wrong
It sounds like my car is having the same problem , I just wanted to know did it give you any codes such as transmission or vehicle speed sensor codes ?
All my lights came on my 08 infinitifx35 after switching to premium gas.... could that have anything to do with it?
You know it does not make sense, however a couple of years ago where we buy our gas they happened to be out of regular, so we put premium in our Nesan. A day or so later the car started hesitating and the engine light came on. I wound up having to replace the crankshaft sensor. I thought it just a coincidence at the time and I still do. It just seems strange that would occur. If your engine light came on at the same time as the others, you may just have a bad sensor. If the computer detects degraded engine performance, it will sometimes automatically shut down ABS and traction control. I had a Toyota come in a few years ago with all the lights on similar to your situation. All it was, was a bad oxygen sensor. Once I replace it all the lights went out. Go to one of those auto stores that advertise running a free scan and see what pops up. Let me know what they find.
This morning the same thing happened to me. The lights came on but the car drives normally and I can fell the traction is off and the awd aren't engaged when in heavy snow. Theyll be off for a bit when I shit the car off but will turn on after driving for few minutes. Does it sound like abs? I changed my tires last over a year ago so I dont see how the abs sensor could been affected
Is your engine light on as well? You may have an issue with your engine. if the cars computer detects degraded engine performance it will sometimes shut down the traction control, abs etc. I had a car come in with those lights on and it turned out to be a bad O2 sensor. Another time a car came in with similar issues and it was a bad variable valve timing solenoid. Recently I had a car with those lights on and it was the crank shaft sensor. The point I am making that it is not necessarily a problem with the abs or brakes.
@@richardspaulding5035 no check engine. I'm driving this morning and it didnt come in yet. Which is weird usually goes on after minutes of driving.
@@hockeyman1 It is difficult to diagnose a problem from afar. I think at this point you need to get it in and have it looked at.
So I did a check on it and it came in as a automatic speed control device error. Could that be an issue
@@hockeyman1 I am not sure if that is the cause or one of the results. I think you're going to have to get it in somewhere. keep in touch
I have a 2010 it’s only got 68k on it so mine has drivers rear sensor error this would be why my lights same as yours is all on my wife had a flat on front and we had put spare on that’s when it all started I hope this sensor on rear fixes mine I have no other codes in it but abs rear sensor so I’m going to try and see if I can clean it and hope all my lights go off
Please by all means let me know in another comment what you found and what you did to fix it. Seems very weird that you changed the tire in the front and then a problem surfaced in the back. However over my many years I have seen stranger things. The last time I had a problem with a rear ABS sensor was when the wire came free of the retainer and rubbed the tire until It wore thru. Good luck and thanks for the comment and watching my channel
Wow we one is new the car just have 100 miles
Hi, I have a 2010, code read front passenger side ABS sensor. I replaced both of them. Now while the car is idle, no lights show. When I drive it and press the brake pedal, ABS engages on the passenger front, I know because you can feel it. Then all of the those lights come on except the check engine light. I 1st bought cheapo Amazon sensors and it did the same thing. Was told to chuck the cheap ones and get OEM from Nissan. I bought a OEM front set and it still does the same thing. Once the car turns off and you restart it, all the lights are off but hit that brake pedal and boom, ABS engaged and lights back on. I GIVE UP
Have you run a scan tool on the engine? If the computer detects degraded engine performance, it will sometimes shut down the abs system. I had a Toyota in with a bad O2 sensor and the abs lights on. Once I replaced it the lights went out.
Most shops have a nominal fee for diagnosing a problem. Then you can go on UA-cam and find out what is involved in making the repair
I have the same problem buddy
Thanks for this :)
I am glad my screw up was helpful. Thanks for watching
My awd lock stays on while driving but doesn’t shut off. When I turn it shakes real bad. Any advice
It could be any number of problems. I would not dare speculate without seeing it. I suggest taking it to a dealer or local repair shop and pay what ever they charge to diagnose the problem. Usually it is between $75 to $125. Once they tell you what is wrong then you can make a decision if you feel like you can fix it yourself or have them do it. Many shops will credit back the diagnoses fee if you have them do the work. let me know what you find. I had a car in my shop recently that was shaking all over the place. It turned out to be simply a bad tire. Thanks for taking the time to place a comment and thanks for watching my channel.
@@richardspaulding5035 thank you for the advice
That means the AWD is locked ON and the axles are fighting themselves while you’re driving. The shaking is the axles LOCKED while the wheels are turning…not GOOD!
What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?
Thanks for the question Edwin; I have never seen that and I could not find any information on that problem. One thing you could try is resetting the cars computer. Simply disconnect both the negative and positive terminals from the battery. (Always disconnect negative first). Then carefully touch them together for a few minutes. Do not let them touch any other part of the car while you are doing this. Then reconnect the terminals (This time reconnect negative last). let me know if it helps.
The video was helpful because i could not find the censor ty
Thanks for watching, I am glad my mistake was helpful lol
What is the name of the sensor? Abs sensor?
Yes, it was the ABS sensor. It has been a couple of years since making the video. I don't have time right now to watch it but as I recall after making a repair, I think it may have been a ball joint I did not get the plug that goes to the sensor all the way clicked it.
Thank u. All my lights was on to. U gave me an idea of what it could be
I am very sorry I have taken so long to reply. How are you making out?
@richardspaulding5035 I haven't checked it out yet. I been driving my other car. But , I'm gonna figure it out lol
Cross fingers that’s the only problem 😢
I’m about to check my car now
Sorry I took so long to reply. Hope everything worked out for you
I have a 2011 nissan frontier and when I got my new tires put on when I went to leave the brake abs vdc off and slip lights came on all at once. After some research I topped off the brake and power steering fluids and reset my ecu. They went out for almost a year until last week they came on out of nowhere again only a reset won't clear them this time 🤷🏼♂️🤷🏼♂️ vehicle don't perform ANY different so I dunno
Chris; since you have 2 posts I will respond to the other one
And my lights come on as soon as I reach 15 mph
It is interesting that this all occurs at about 15 miles per hour. that is about when the control unit would typically detect a problem. If you have not already, find a OBD2 tool that can read ABS codes as you may have a bad wheel sensor or defective ABS module. These may be dumb questions but are all your tires the same size? Are they all inflated to the correct PSI? Does the car go down the road smoothly, perhaps a bent rim or damaged tire? I don't remember if you mentioned it but is your brake light on as well. Are you loosing fluid? I did the brakes on a Honda last year. It came back a few months later with one of the new calipers I installed leaking. If you are familiar with my channel it is intended to serve the back yard guys of the world. For the most part I use tools that the ordinary guy could reasonably expect to have. What I am trying to say is over time we save a tremendous amount of money by working on our own cars. However there will indeed be times when we just have to bite the bullet and take it to a dealer. Good luck and thanks for watching my channel.
@@richardspaulding5035 hey thanks buddy yea I always do my own work as much as I can at least lol obviously there's times you just can't. Far as tires they all same size. Proper psi etc, brake fluid seems level, I had the mechanic at my work run diagnosis on it and he has to research some of the codes and said he'll get back with me. Ill let you know his findings
@@chrisrichards1424 ok thanks I will look forward to hearing what he found.
@@richardspaulding5035 hey richards, so my mechanic buddy is awaiting results still, guess they forgot to pay the miller bill, (their diagnostic people) however just wanted to give you a update, I had to work overnight last night so I left my truck parked at work and took my work truck and trailer home, yes the temps dipped into the 40s here in FL (not that that made a difference) but get this, I get into my truck and let it run for a few mins while transferring all my personal stuff into my personal truck, well I go to drive off and pull out onto the main road and proced to get up to speed, only this time, ready? The lights never kicked on...... WTH?! Lol why it happened I have NO idea I literally did nothing to it. Will still post whenever he gets the read results back. Just wanted to share this bizzare occurrence
@@richardspaulding5035 oh yea one more thing, last weekend I changed my oil, and maybe put on 5 or 10 miles since I changed it. Dunno if that had ANYTHING to do with it going off but 🤷🏼♂️ I've heard in the past this could happen if the oil was low?? I dunno
We want information. Not rambling.
There have been more than 22,000 views on that video. You sir are the very first negative comment recived. Perhaps you should remain as the name you so appley selected.
You're a good mechanic and 5 stars. I'm a goldsmith, and mistakes happen. What makes a man a man is living up to them, everyone's happier that knows
'We all make mistakes".
I make a lot of them LOL. Thanks for watching.