VDC and Slip Light On Infiniti QX56 | Steering Angle Sensor
Вставка
- Опубліковано 11 жов 2024
- 2008 Infiniti QX56 with a VDC OFF and a SLIP light on the dash. Im going to take you through possible causes and what it took to get this one fixed. Theory applies to any Infiniti and Nissan with similar issues. If you found this video helpful and would like to show some gratitude use the link below. Thanks in advance.
Gratitude paypal.me/Homi...
MERCH teespring.com/...
Tool Box Stickers teespring.com/...
So I'm always skeptical of these UA-cam mechanic videos, but this is probably the best video for information, very well put together and in depth but not convoluted with nonsense info. Great video! Keep it up
One of the most well-rounded mechanics i know of here on UA-cam, it's just a matter of time before the diamond in the dirt is found!!!!
Dexter Dexcool Hell Yeah 🙌🏼 That means a lot Homie 👊🏼
I've been learning this stuff for 30 plus years and I fully understand what you be saying but I watched one of your videos and you said you've been in this for 10 years your knowledge is amazing for a 10 year man keep up the great videos and be very proud because I've seen guys come to work with 10 years experience and can't do half of what you do
Very well explained, simple fix, easy money. My boy you're killing it with the weekly videos. Keep it up Homie!!!
The MechanicLA I’m trying Bro.
@@HomieHektor how much did that repair cost?
Was trying to calibrate my for 30 min until I realized that the engine needed to be off after watching this vid, thanks man.
This is the best video I’ve found so far. Thanks for posting this video.
You are a money saver brother. Recently changed my air back clockspring and was surprised to get the vdc off and slip lights and was pretty perturbed. Appreciate the video. Since my car is a 2006 I keep a Bluetooth autel odbii scanner connected to my vehicle and was able to reset with your instructions. The autel odbii tool made me think I needed to have the car running and move it forward and hit start. That didn't work but having the key in the on position an pressing start did. Thanks a million.
Man thank you ! it worked. I manage to get rid of my ABS 1143 code. I have in infinity qx50 2017 and I used the Autel MaxiSIS. I had to post this in gratitude for the work that you have done!.
Alexandru Balaci Awesome 🤙🏼
Wow for firestone mechanic. Your extremely good at what you do.
Oh yeah, that rear tire is definitely tilted. Good eye. Nice editing too Hektor. Autel for the save!
Thank you for the video holmes. I tried to reset the traction light on my Nissan truck. I did do it right the first time. It's just the clockspring I had got from the dealership wasn't the right part but has the same exact part #. The OEM clockspring was not even engaging the steering angle sensor. So it did not make any sense to reset the light in the first place!...but yes, I went thru the right steps on our shop scan tool. Like you just showed us.
Thank you 🙏 that was very helpful sense we just had an alignment done on our Infinity and now I know what they forgot to reset! Very good video 👍
Excellent stuff your channel is one of the best, yet it's still under the radar. its gonna show soon you'll see homie!
Matco Fools Fingers crosses Homie, I’ll be here putting in work ⚙️
I heard a ticking coming from the left wheel while moving from a stop.. The ticking is now gone and I have that same code directly after. 2012 Sentra however the steering is also pointed a little to the left. Just picked up the car used so no history. Thanks for the video, I'll probably try this route before trying to find what was ticking as I have been under the car b4 and saw nothing obvious.
excellent, too bad I don't have those scanners.
Nice to see EXACTLY what the sensor was sending out.
CFauvel Sure is, Thanks for subscribing 🤙🏼
Jests Christ you’re a hell of a mechanic
excellent video all very clear, and a bit fast but you can understand it, very good Thank you for your help
I was hoping to see the readings after the calibration. No dice. Mine started activating the slip sensor every time I turn
GREAT VIDEO THANKS FOR YOUR TIME AND WOULD LOVE TO SEE MANY MORE VIDEOS PLEASE !
This was a very well put together video bro... I appreciate the time and effort
Really really good video. Very detailed and useful information.
Thank you . I have same as you have there and i will fix it
Great video, fixed my issue.
Nicee 👍 liking the music at the end
Great job
Excellent, thanks a million.
You my homie, hektor
Did this vehicle have an air ride system? If so, did it, by chance, allow that to start working properly? I have these same lights on, but when they came on, my air ride also stopped working, which is what is causing the back wheels to lean in so much.
Superb job!❤
yu da man paana,have same problem 04 fx35 kicking my ass,replaced clock spring and angle sensor ,same p,now ill get an alignment and reset and see,thnkyu,wish me luck
D1 CuStomz let me know how it goes 🤙🏼
Hey Hector nice video .I want to buy a 07 M45 but it has on the VDC an slip light on so you think by giving it a wheel alignment and adjusting the steering angle sensor it should be fine. Have been checking the internet you have the best video I've seen so far
damion smith you gotta checks the codes, and see what’s stored in memory, after you do that then we can go from there 🤙🏼
@@HomieHektor had the car scan it had no codes on it. I am going to try to use the difference scanner .snap-on scanner is bulshit ...
Thanks bud! I replaced steering shaft ujoint on 05 g35,when done steering wheel was off center with vdc/ slip light on, must have put new joint on a few teeth off.
my similar experiences
Misalignment or incorrect tire size from wear or wrong XXX/65/20 for example
i had a VDC and ABS light come on... when i mis aligned my wheels... (rear).
I realigned my wheels and the ABS system no longer noticed wheel ratios turning at different speeds...
relative problems could include: most likely, incorrect tires/worn tires/ incorrect wheel alignment .. .or last a level suspension indicator(little plastic arm) is broken or popped off the frame.
Appreciate this video fam
Thanks for telling me that
Great video and very helpful thanks looking forward for more to learn from you
Sup Hektor keep up the good work. 👏👍
Rodin Ramos Thank You 🙏🏼
I had car other day issue was car was out of alignment car was hit on drivers side it had slightly bend strut we replaced strut did a alignment solved the problem so alignment can cause light to come on.
Did the back wheel correct itself? I have this exact problem with my 2010 QX56.
More than likely it’s your rear suspension compressor gone bad
I have this problem too, but it is worse than the video. I already had it worked on, aligned twice. My steering wheel is loose to the left and right while going straight, and it makes grinding noises every time the slip light comes on like the abs is kicking in. I removed the busted rear airbags for regular shocks and replaced the coil springs. These are poorly designed vehicles. Everything I fix seems to break a second time. If I try to switch lanes with a curve to it, it feels like the steering wheel has too much play, like I'm almost about to wreck. I was told I need a clockspring, and the rack is leaking. I guarantee you that if I fix it, it will only last temporarily.
Great video!
Thanks, best explanation. I have the same problem the vcd off and slip permanently I try to clear dtc with scan nothing hapend the dtc Steering Angle Sensor back again how can fix ps: I HAVE change the Clock Spring Spiral Cable fx35 2007 is there adjustment for clock also?,,,
islem baddi no adjustment, just replace it 👊🏼
@@HomieHektor THANKS GOOD LUCK
Love your detailed video, any suggestions on code c1142 on a 2008 infiniti?
Quick question I have a 2017 Toyota Corolla took it to the Dealer they told Me The steering wheel needed to be calibrated
Another cool video like!
I have SLIP light and ABS light and AWD light on after mechanics replaced front wheel hub bearing assembly. Did they do something wrong. They tried to tell me the abs line needs to be repaired. Or did they brake my stuff
If all this happened after they touched it, then it could only mean one thing 👍🏼
Mine did the same thing but mine would come on when I go down the road a little an it turnt out to be the alignment than once I got the alignment it didn’t come back on the lights stayed off
Robert Montenarojr it’s always something simple 🤙🏼
Great video! I got my traction control light on, on my g37.I recently took it to a shop to install a new steering wheel and the clock spring was damaged. They replaced my clock spring but the VDC light is still on. I think this will take care of the issue but my horn and volume controls, cruise control are not working also. Any tips to fix this?
It’s the clockspring just replace it
It was the clock spring! Recently replaced it and it worked 🤙
Where in California are you located? I have the exact same issue
Hektor Which diagnostic scanner would you recommend we have Snap on scanner in a shop but i would like to have my personal scanner?
Check all the connections under the hood
... I have this issue with my 2010 Nissan Altima with the ABS, Slip, and VDC off lights... Is it the same for all Nissan models?
My 2007 Infinity m45 has RAS, Slip, and VDC off lights too.
Awesome video! My light came on after getting front end work and my steering is off 30 degrees. I will definitely take it in today for alignment.
Did it work!
Hey man! been dealing with this issue for months my abs kicks on, on its own and literally stops me in my tracks even though I went nowhere near the breaks. super messed up. i really don't want to spend a bunch of money at the dealer because I already spent to break this in the first place and accomplish nothing more.
can I reset it with a regular code scanner?
Where in California are you located?
I have a 2005 FX35 and my light VDC and Slip came on as I pulled out the garage. The engine runs but car doesn’t have power in forward or reverse. Also the service engine soon light came on.
sometimes the throttle-body trouble
I got the same scanner
I prefer it to snap on
Mirkwood Sometimes I do too 👊🏼
I have this issue, is it bad driving like that while i have a chance to take it to the shop? Note: i installed lowering spring and havent done an alignment just yet, will that be the problem?
Thanks.
Tomas Lopez Could be, this happened right after installation of the springs?
@@HomieHektor no, this just happened 2 days ago and i installed the spring in new years. They turned on this morning on my way to work, and when i got out and turned the car on to head home the ligjts didnt come back on. Its weird
I have the same issue vdc light and RAS and slip light is on ...came on after I got the starter replaced. any tips on what to do?
What is the name of that scanner I'm looking to purchase one
What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?
My g37 has those two lights on slip and vdc off? Car had alligment does it need to be rest I need to take it to a shop ? Has brake fluid
Please share the exact model of this Autel device.
2010 Nissan Murano LE AWD: Replacing ABS actuator do I have to reset the steering angle sensor?
So i just had this problem just today when the shop changed the Clockspring on my truck. I bought it in Ebay aftermarket i believe.....not OEM. So what its doing now after it was installed is when i drove away from the shop it started having the VDC problem like a pulsating/grinding effect. Brought it back to the shop and they inspected. They found out that the Steering Angle Sensor was not functioning..........the scanner showed it zero degrees on straight and when turning the steering wheel left and right it still stays at zero degrees. Do you think the Clockspring is bad or not compatible with the OEM Steering Angle Sensor thats why its not reading it? Or the Clockspring connected to the Steering Angle Sensor need to be calibrated or do a relearn?? Does it need alignment and they need to reset the Steering Angle Sensor?? Please help.
Did you figure this out? I’m having the same problem & mechanic can’t figure it out?? Lol… he replaced my clockspring
I have the same problem can you help me ?
My steering wheel is straight, I just did the alignment and she drives straight as an arrow and I just reset the sensor and it reads 0.0 so the reset worked but the lights are still on.
why my 2006 Infiniti qx56 alarm goes off at night every hour. won't stop unless I start the truck
Efrain Garcia something is up with your alarm, maybe a bad module
I have been having issues with the VDC/SLIP light come on while driving and it cut power completely. I try almost everything. Can you advise.
I have exactly the same problem.!! Did you know what was the issue. Thanks
Would I need this if I replaced my steering angle sensor?
Yes
Mi Nissan Frontier tiene asi el volante ahorita... después de que di un golpe la curva de la calle..
Vdc and slip light is on my 2010 Altima I did wheel alignment still on?? 😔 What else should check for brake pads? ?Rotor??
Krown Lord Have it scanned for codes, not related to brake pads and rotors...
Not related to brake pads and rotors you mean? And thanks will do hektor👌🏻👌🏻
G35 with Both lights on and acceleration in Limp mode because of it. This my problem?
No. Not your issue. Your car is in limp mode for 2 reasons. Either the valve body has to be replaced or your transmission isn't getting enough current.(voltage). What error codes are you showing
Same problem with my g35x can’t figure it out
where are u located?!?!?!?!?!?!!??!?!!!?!
🗣California!!!
@@HomieHektor whats your instagram or twitter could I please shot you a message!
@@TheSleepingHallow IG: EverdrivenAutomotive
How do I do this without paying someone ?
I have code c1143
Nissan altima 2010 2.5L
Symptoms: steering wheel is not aligned, way off... I turn on the car, lights stay on for 4 seconds, they turn off and when I drive away. 8 seconds later the VDC and slip light pops out and I loose power. I don't completely loose power but I feel the lag.
What I've done: I did replace the drivers side tie rod end. (My suspicions is that it got misaligned and now the VDC and slip light is on)
How I tried to fix the issue by doing research: topped brake fluid, checked brake pads, replace both speed sensors, checked fuses, checked pedals sensor (both) check for bad connections and bad wire.
Problem persist.
My question: If I don't have a scanner can I just do an alignment and replace the angle sensor?
If so would the light on the VDC and slip will stay on if I don't reset the VDC
Tell my how much you charge!?
Hector Help!!!! amateur was working on my truck. Would that work on Nissan Frontier 2012, he did something and now the front brake locks when I try to turn what should I do ????
Try resetting your sensors related to the ABS. Your truck is trying to prevent oversteer and applying the brakes when it isn’t necessary 👍🏼
@@HomieHektor thank you 🙏
Can this cause p0335 code (crank sensor) and slip light vdc on?
Miller Mary Williams Gary Young Lisa
Awesome stuff bitch!
Glad you put this video out...bitch!!!!