How to Build a DIY Travel Trailer - The Frame (part 1)

Поділитися
Вставка
  • Опубліковано 28 лис 2024

КОМЕНТАРІ • 1,3 тис.

  • @homesteadonomics
    @homesteadonomics  2 роки тому +2

    Check out my NEW Homesteadonomics T-Shirt Designs here! www.bonfire.com/homesteadonomics/

  • @BulletproofPastor
    @BulletproofPastor 6 років тому +36

    I have a few suggestions for you. I'm retired now but I was a senior RV tech at one time. RV is just a slick way to sell cheap hardware and appliances at outrageous prices. For what it's worth, new technology has come a long way and one of the greatest improvements is in refrigeration. For the cost of an RV (ammonia absorption) fridge that performs poorly you can install a solid state or one of the new compressor refrigerators. Your cost savings can be put into better battery/inverter power. I've personally laid eyes on six RV's burned to the ground because of RV refrigerators that caught fire. Same is true for RV stoves. You can have a small (real) stove (24" apartment size) for half the cost of the trashy RV offerings. There is also a camping style 'on demand' water heater that runs on propane. It is far more efficient than either Suburban or Dometic RV tanked water heaters. Great video series. Your trailer looks great so far.

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      haha... I can imagine that :) Well, they definitely need to make it profitable so I can see not using quite the best components all the time. As for this build... I'm thinking super simple... I want to have power for led lights and charging ports for phones, etc,. But depending on weight I may not do a fridge or stove...was thinking of just a propane cook top stove that I can use indoor or out and just a cooler for food. I know that sounds crazy...considering building a trailer..haha.. but I want to only add the things that will be hands off and have little maintenance requirements. I’m even figuring a gravity water system as a way I forgoing a demand pump and water lines. Would still have a low tank but would only use the pump to charge the high tanks once we were parked then use gravity during the stay...just thoughts though😀

    • @BulletproofPastor
      @BulletproofPastor 6 років тому +4

      Great ideas. Thought... Those small "dorm room" refrigerators take less than 200 watts and weigh about the same as a large cooler. Easy to replace at any Walmart too. Cook top... Good move. The least used appliance in any RV is the oven. The camping LP stoves are low profile and could easily move to an outside kitchen. There are quick connect propane fittings available. You are way ahead of this game.

    • @brodrickrobertson3459
      @brodrickrobertson3459 2 роки тому +1

      Awesome info

    • @veganmom1193
      @veganmom1193 Рік тому

      We use an instant pot and an air fryer to cook everything.
      Check into the coolers that can plug in and be an actual freezer or refrigerator. They are a game changer. I also got a in demand shower head that is a hot water heater that just plugs in.
      Super simple and so efficient.
      Great job!

    • @autumnacrow
      @autumnacrow 5 місяців тому

      If you watch videos on Singapore homes, they are incredibly light, efficient, and actually highly luxurious. Asian countries, especially sKorea, Singapore, and Japan are decades ahead in compact luxury.

  • @mjremy2605
    @mjremy2605 4 роки тому +6

    This is what they should teach us in school instead of canning veggies. What a set of skills! Much respect. I'm envious.

  • @saddambinwahid3411
    @saddambinwahid3411 Рік тому +132

    You'll never need to worry about cutting the wrong size, spin in circles or waste time trying to figure out what goes where... With ryan's detailed shed plans ua-cam.com/users/postUgkxT9ExVpR-3A-9rpRqx8vzXKZ3BMMTg_KH , it makes building sheds a breeze - just like putting lego bricks together! You'll be able to create the kind of shed, your neighbors and other woodworkers will secretly envy (while mumbling nice job under their breath).

  • @MOUNTAINEAGLES
    @MOUNTAINEAGLES 6 років тому +1

    You started a good project to go camping with the family. 🏕👍🏻🦅

  • @billymasoner3735
    @billymasoner3735 6 років тому +4

    You’re a really cool dude, I love that you put the thought into keeping this a multi-generational family project, it will be something you’ll be able to show off to your kids and grandkids for years to come.

  • @glenfaughtjr1663
    @glenfaughtjr1663 6 років тому +1

    It's wonderful that you have generous and helpful family members who offer skills and experience to your projects.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      yes, I'm very blessed with a great set of friends and family... even on projects where I don't get any help I still often use them as a sounding board and idea check. My father in law is one of those guys who is like a subtle genius... just a wise man that seems to know a bit about everything and if its something new he can usually figure it out by deduction. I want to get a video with just him at some point:)

  • @antoniogray5344
    @antoniogray5344 6 років тому +4

    I just got to say it. You motivate the hell out of me when it come to projects. When my knucklehead wife sees me watching videos like yours. she knows it's a new project coming around the corner. LOL
    🤔😏😊

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Thanks Antonio! the same think happens to me... I'll be looking at something and wife gives me the 'cross examination' face... and I just have to laugh :D

  • @brucehutcheson5371
    @brucehutcheson5371 6 років тому +1

    Rarely do you see a video on how to build something that is as well done as your trailer build. While others hum haw around, you were direct, smooth and moved at a fast enough pace so as to not loose the viewer's interest and get it done. Great video.

  • @jamiescott5461
    @jamiescott5461 6 років тому +12

    You are so talented, I’m amazed at how well/fast you learn then implement. Great job

    • @homesteadonomics
      @homesteadonomics  6 років тому +4

      thanks Jamie! It's definitely a learning curve for almost all my projects....lol... a lot of fudging and figuring to get it right ;) So the talent level isn't all that high... mostly the motivation to figure it out is though :D

    • @claudiushansl736
      @claudiushansl736 6 років тому

      Jamie Scott h

  • @joeyaus1
    @joeyaus1 4 роки тому +1

    As a retirement project I am currently building a 12ft retro travel trailer this video gave me the inspiration.

  • @teresaplunkett6602
    @teresaplunkett6602 6 років тому +7

    It's been too long since I've seen you build something! I am so looking forward to seeing all the stages of build through to the end, a travel trailer no less! Exciting, but I have no doubt it will end up being fantastic! All of your work that I've seen is incredible. 👍

    • @homesteadonomics
      @homesteadonomics  6 років тому +3

      Thanks so much Teresa! I'm hoping it progresses smoothly with as few hiccups as possible...lol.. but it is a learning process as this is the first time I've done something like this :)

    • @teresaplunkett6602
      @teresaplunkett6602 6 років тому +2

      homesteadonomics, I understand hiccups, but that's part of the learning curve, right? I still have confidence you will design & build a real show piece like you always do. ✌

  • @freethinker8047
    @freethinker8047 6 років тому

    Give FULL credit to people who are supportive and generously share their knowledge, because that kind of generosity is a game changer. People like this Father-in-law, up level our capabilities, and self reliance. I have people in my life who hear the info I share with them and they, one in particular, immediately ego trips like they already knew the info...ego trippers suck !
    Glad to see you gave some (?)/all (?) credit for his contribution.

  • @blackberryhideout5793
    @blackberryhideout5793 6 років тому +7

    I'm so excited to watch the progress of this trailer. Watching you put this part together is inspiring!

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      I was inspired by a beautiful cactus mural that was perfectly put on a climbing wall in just a few hours in less than ideal conditions ;D

    • @blackberryhideout5793
      @blackberryhideout5793 6 років тому +1

      homesteadonomics that’s us, inspiration sharers! Haha! Our whole family does this in some way or another don’t they? 😉

  • @bloodysandlover
    @bloodysandlover 5 років тому +1

    Love how your project keeps the family close.

  • @silvergrizzly316
    @silvergrizzly316 6 років тому +66

    I said it before and I'll say it again, "there hain't nothing you can't build joe!!!" LOL! You are a professional my friend!!! Can't wait til part 2. 👍👍.Jay.

    • @homesteadonomics
      @homesteadonomics  6 років тому +5

      haha.. thanks Jay!
      But I'll say it again....lol... there is plenty I can't build... I just pick the ones that I think I can build :D

    • @silvergrizzly316
      @silvergrizzly316 6 років тому +1

      homesteadonomics , LMBO!! Me too!!😁

    • @warismysoul
      @warismysoul 6 років тому

      HIS FUTHER R PROFESSIONAL.... HE IS JUST FOUND OLD IDIA.....

    • @rkhyden1950
      @rkhyden1950 6 років тому

      Hog Man
      Great job !!!

  • @alisadiq9504
    @alisadiq9504 5 років тому +1

    i loved your father. its nice to see son and father work together.

  • @mike817fw
    @mike817fw 6 років тому +4

    Can’t wait for part 2 this is going to be an exciting build

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks Michael! Me too! The quicker that I get to part 2... 3, 4, etc.. the quicker I'll take the girls camping :D

  • @petem6291
    @petem6291 6 років тому

    Thank You for taking the time to make these Videos, I just wanted to share something with you.. I worked in a busy repair shop for a number of years and some times we would work on trailers the complain was they would be ill handling or blow out tires , the problem was always , that there were car tires on the trailer, My boss would order replacement TRAILER only tires and it would fix the problem , to this day I could not tell you the difference between the two or why this happens , but it just goes to show you how much engineering goes into a a tire..good luck on the build Pete M

  • @calimesacox
    @calimesacox 6 років тому +7

    Wood floors are awesome idea. Just use rino liner to seal the bottom, you can buy a gallon size that will do a whole truck bed. Apply it to the underside and wa la.

    • @homesteadonomics
      @homesteadonomics  6 років тому +3

      rino liner might just be the perfect coating for the bottom... I was just gonna seal then oil based paint... but now I am going to have to check into that:)

    • @markcobb6561
      @markcobb6561 6 років тому +3

      no no no. ive made that mistake already brother. it doesnt last and then your just out of that money. you can better use thin 26 gauge steel or aluminum. i know your thinking keeping road salts and grime out of the wood but but the main reason is to keep mice out of the house.

    • @OhioPrepperOne
      @OhioPrepperOne 6 років тому +1

      Mark Cobb no to paint or no to rhino liner??.

    • @kellybearden5697
      @kellybearden5697 6 років тому +1

      No to paint and Rino liner. Mice can and will chew through it. Aluminum or steel hurts their teeth.

  • @johnbeckman8916
    @johnbeckman8916 6 років тому +1

    1. Industrial Metal Supply is AWESOME! Have several here in L.A.. If walking thru their store doesn't get you going, it's time to hand in your "Man Card".
    2. You Father-in-Law is AWESOME! Whenever that dude shows up he makes a huge contribution to your project (Greenhouse).
    I guess you hit the "Marriage jackpot"!

    • @homesteadonomics
      @homesteadonomics  6 років тому

      haha!!! yes
      1. sooooo true!
      2. Even more true!!! My in laws are just so awesome! I did win the lottery with both my wife and her family... but first my wife.... especially if she reads this....lol ;)

  • @chuckkillawood8229
    @chuckkillawood8229 5 років тому +3

    Great to have a handy father-n-law, also when using any type of wood for the bottom, coat the down side with roofing tar and let dry, last forever and is dirt cheap. Keep up the good work.

    • @Tay58382
      @Tay58382 3 роки тому

      Now there's an ignorant suggestion from a person that hasn't a clue.

    • @chuckkillawood8229
      @chuckkillawood8229 3 роки тому

      @@Tay58382 whats your construction experience look like asshole?

  • @zerocool2352
    @zerocool2352 6 років тому +1

    This thing is going to be indestructible. FWIW, the vertical backend causes suction that will hit your fuel mileage, that's why the "teardrop" shape is ideal. If this is intended to be mostly a sleeper and the bed is going to be in the back, you won't really miss the headroom... or maybe even just make it more of a teardrop trailer and have a pop-up to an outdoor kitchen. Can't wait to see what you come up with next.

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Zero Cool yes, It’s not the ideal shape...but hopefully it won’t be to much of a hit...a teardrop was what it originally was going to be until it got revamped. No much head room needed in back...but I may have some storage and a loft up there...not quite sure just yet though. Thanks for checking it out😀

  • @lakebum6211
    @lakebum6211 6 років тому +5

    Hi Joe,
    I use to build a lot of stuff for my boats using plywood. I couldn't afford to spring for marine grade so I'd take exterior grade and coat it with a few coats of fiberglass resin. It worked like a charm. Can't wait to see the next video. It's really lookin' good.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Thanks LB! I'm in the same boat... will be sealing my plywood really well. But the current plan is to skin with aluminum and do spray foam or foam board so that nothing on the exterior has any wood to rot.... except for the floor that is ;)

  • @juliesummerfield9784
    @juliesummerfield9784 6 років тому +2

    I am liking your frame. Looks super strong. After redoing a 1974 travel trailer I was shocked how wimpy they are built! I cannot believe they can handle going down the road the way they are built. We loved redoing ours and next I hope to build a tiny house! Looking forward to watching more on this project.

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Thanks Julie! I'll bet that was really cool project when you got it all done. Really knowing the ins and outs of it. And yes, it is crazy how well they do on the small frames. Mine might be towards the heavier side... but hopefully will have increased durability (fingers crossed :)

    • @huckstirred7112
      @huckstirred7112 4 роки тому

      I got a 20 foot trailer frame made from 2 x 6 x 1/8 wall rectangular tubing with z purlins in the middle . Looked wimpy and light , but it is super stout

  • @edsanchez209
    @edsanchez209 6 років тому +3

    You build stuff the way things should be built I love it another great video can't wait till see the final product

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Thanks Ed! I don't know if my quality is that good... but I do my best! and yes, I can't wait to see and (camp in) the finished trailer :)

  • @micamendez
    @micamendez 3 роки тому

    I'm currently studying industrial design and we're working on a food truck so this is SUPER helpful
    Thank you so much for this vid!!!!!! Awesome trailer

  • @ryanchristie5349
    @ryanchristie5349 6 років тому +19

    So you scored an axle and you built a whole custom trailer around it...
    👌🏻😅
    Thanks for sharing the build!

  • @krisdadabmetha1899
    @krisdadabmetha1899 6 років тому

    Look at that workmanship ,nice!!

  • @bobferranti5222
    @bobferranti5222 6 років тому +6

    That's not a trailer...... it's a tank! It's going to last forever! Great build.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      thanks Bob! I just hope it doesn't pull like a tank :D

  • @thomaslindgren4602
    @thomaslindgren4602 6 років тому +2

    Another great video. I love the fact that you used the knowledge all ready available in your family rather than trying to re-invent the wheel mentality. Making it a family build will just enhance the memories this trailer will provide. Your wielding/fabrication skills have really increased. ,Ames me think I need to take up wielding, opens the door to so many possibilities. Again, thanks for a great video and sharing!

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      thanks Thomas! Yes, Ive got some great resources in the family!
      ... and about welding... I would definitely give it a shot. It's really fun and opens up a lot of possibilites to builds and general repair work that I previously wouldn't have thought possible :)

  • @afonsosn6895
    @afonsosn6895 6 років тому +3

    Another amazing project, looking great! Love the fact that this is a 'family project'. As always, thank you for posting!

  • @squigburger
    @squigburger 6 років тому

    This is the one of the best channels on UA-cam. It is rekindling my love of building things.

  • @ashqelon7267
    @ashqelon7267 6 років тому +3

    I love watching your variety of projects.
    They are interesting and youre very well thought out on your strategy, along the way and at each step.

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Thanks Ash! I appreciate that. Variety is a necessity for me as I have lots of interests and like to know a little bit about a lot of different things :)

  • @dv7431
    @dv7431 5 років тому +1

    Have to love the old times a wealth of knowledge

  • @raynoladominguez4730
    @raynoladominguez4730 6 років тому +8

    Cool. I can’t wait to learn from you on this project. Great video.

  • @lemoinexavier
    @lemoinexavier 5 років тому +1

    "Industrial metal Supply", wow, this is heaven!

    • @lemoinexavier
      @lemoinexavier 5 років тому

      BTW, you can go to war with this trailer. Well done!

  • @helmutprost9714
    @helmutprost9714 6 років тому +11

    Really looking forward to seeing more of these!

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks Helmut! I've been looking forward to this build for a while and it's nice to see it taking shape... now just to get it to a campable stage :D

  • @jbb5470
    @jbb5470 6 років тому +2

    Glad to see your father-in-law helping out! Looks good

  • @justinprewitt245
    @justinprewitt245 6 років тому +3

    This will be a great project

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      thanks Justin! I'm super excited about it! It's gonna be a lot of work but oh so worth it by the end... assuming I don't make it too heavy to pull that is:)

  • @dngendron
    @dngendron 6 років тому +2

    That store is my heaven, wish we had one of those!

  • @fredrouse9334
    @fredrouse9334 6 років тому +3

    Looking good so far, keep up the good work

  • @TM-bd7nf
    @TM-bd7nf 4 роки тому

    That is very impressive. Aside from the welding skill (which I know nothing about) the planning and craftsmanship is absolutely amazing.

  • @hello456able
    @hello456able 6 років тому +3

    amazing job man thanks for sharing! very impressed! would love to do something like this from scratch!

  • @Tsiri09
    @Tsiri09 6 років тому +1

    Wow- I've never seen a TT built from the frame up, starting with building the frame. You're a genius!

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks Tina! It's been a project that's been on my mind for quite a while now! can't wait to get it campable!
      been researching on a forum called tnttt.com... tons of great info from folks building mostly teardrops...but pretty much a little on ever subject :D

  • @sp1ke316
    @sp1ke316 4 роки тому +7

    "I was going to tow this with my Jetta TDI..."
    Aaaaand I'm subscribed

  • @InFltSvc
    @InFltSvc 6 років тому +1

    You definitely are the master of all things !

    • @homesteadonomics
      @homesteadonomics  6 років тому

      haha... you're too kind :) more of a guy who knows enough to get myself in trouble of a lot of things ;D

  • @jodygroshon7969
    @jodygroshon7969 6 років тому +3

    Great start Joe. Looking forward to the next installment.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      thanks Jody! I'm looking really forward to having that one ready:D

  • @jesse977
    @jesse977 6 років тому +1

    Wow!!! You are amazing! You should be in the next Avengers movie!!! I cant wait to see your trailer when its done.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      haha... now that's a compliment! I don't think I'd be able to compete with the rest of the cast though :D

    • @jesse977
      @jesse977 6 років тому +1

      homesteadonomics you really inspire me, I want to go out and start building stuff! My girlfriend and I enjoy your videos! Keep it up brother!

  • @Ashysand
    @Ashysand 5 років тому +11

    Cool trailer build. I was thinking of doing a off-road teardrop with my Landrover sankey trailer to match my 110.

  • @dejayrezme8617
    @dejayrezme8617 6 років тому +1

    Awesome build! Thanks for the video!
    I've been researching trailers and tiny homes and RV building for a while. By now I've landed on using plywood, rigid insulation foam and a very thin lightweight sheet of fiberglass and epoxy to make it waterproof. That is how lightweight and sturdy boats are build (they use marine grade plywood but WBP glued plywood should work well enough for trailers).
    It's really lightweight because something like 4 to 6mm plywood with insulation core should be enough to produce a very strong and stiff box. It's lighter than metal or thick wood framing or even pure thicker fiberglass laminate. Basically SIP construction.
    This should be very cheap and lightweight. This is untested though.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Dejay Rezme thanks for checking it out! And your idea sounds good too! If you go and check out tnttt.com they have a group of people who build trailers out of foam and plywood so yoU might get some great ideas there😀👍

    • @dejayrezme8617
      @dejayrezme8617 6 років тому

      Thanks, I checked out that forum once but I didn't realize they also use plywood. Of course they do! :)

  • @mambobond
    @mambobond 6 років тому +3

    Looking good Joe👍🏻

  • @danquistberg7492
    @danquistberg7492 5 років тому

    That's awesome that you had your dad to help you out 👍

  • @montgomeryliteflyers
    @montgomeryliteflyers 5 років тому +7

    I am really inspired to build a trailer now by watching your videos. Very well done and meticulous and planned out job!! I retire in 13 months at age 49 and I am starting a list of supplies. Would it be possible for you to Make a detailed list of Steel dimension and thickness for walls, the sheeting you selected from ISS, Products that went into the trailer(amazon) and why you selected the item you did. I would pay 4.99 plus shipping for that list!!
    or if I buy a Shirt it would be included.
    Great job again.

  • @ShayeqZarrah
    @ShayeqZarrah 4 роки тому

    couldn't be explained simpler than this, after your videos even I am considering to build up my own trailer with my fantastic 0 experience lol, as a noob I googled and learned a lot about how to build a travel trailer and the materials needed, but I couldn't get answers to few of my questions such as measurements, steal thickness, trailer weight, axle capability. If you could give some elaborated tips would be much appreciated. thank you for sharing these amazing videos.

  • @keithconway4567
    @keithconway4567 6 років тому +3

    That looks really good!!!

  • @Stan_in_Shelton_WA
    @Stan_in_Shelton_WA 6 років тому

    LOL at the moved back a bit. 2 or 3 inches is a bit. Great to see posted videos of this type of content, so Thanks.

  • @Jasonoid
    @Jasonoid 6 років тому +3

    Thanks for sharing the project with us, I always love to watch these builds come together!

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks for checking it out Jason! I enjoy seeing the progress of the raw materials coming into something functional by the end of the build... hoping for this one to get to teh usable stage :)

  • @benspens
    @benspens 6 років тому +1

    Awesome Job!!! I really like the 45 degree on the lower back...it will help with backing up without hitting everything with the bumper. Looking forward to the next build

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Thanks Benspens! I liked that aspect too... seen it on other trailers and I thought it was a good idea for practicality and looked cool too :)

  • @mrfyxr7489
    @mrfyxr7489 6 років тому +3

    This looks like a fun project to build and later to use. Have FUN! I have a request. When you get to the part where you join side to top, please show a lot of detail for sealing out mean old mister water. Rot your wood and rust your steel. I like to see this joint look trim and professional. I don't know how to achieve what I want here. I have seen these trailers pulled at high (>70) speed. That is a pretty strong wind trying to push water into any little gap that is there. Good luck with your project.

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Thanks for checking it out! yes, I will do my best to show that part. its something that I want to make sure and do right so I can keep the water away for as long as possible. I still have a bit more research to do as Ive read several different philosphies on the trim aspect of teardrps and camp trailers... seems a good trim piece with adequate sealant applied and the right screws/rivets can make or break the tightness of the edge of the wall roof area

  • @PAKoffee10
    @PAKoffee10 6 років тому +1

    Good looking frame, sir. Looking forward to the rest of the buildout.

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks! me too! getting it skinned and insulated with door/windows will be big victory point... then I'll probably take my time on the cabinets and other interior amenities :)

  • @AndrewScheier
    @AndrewScheier 6 років тому +4

    Coolio! Looking forward to the final product

  • @Haltech007
    @Haltech007 6 років тому

    Never underestimate old guys w/ skills!

  • @juleejames9977
    @juleejames9977 6 років тому +3

    This is way cool - thanks for sharing with us✔️

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Thanks Julee! I appreciate you watching all of these little random builds of mine :D
      Joe

  • @mvnovell4429
    @mvnovell4429 6 років тому

    Accompanying the process from Brazil! Anxious for the 2nd part!

  • @VochosGranja
    @VochosGranja 6 років тому +4

    I got some tráiler plans but no welding skills. Nor a place to actually start a project like this. But one day watch lol. Great build HE.

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Thanks! you'll get to it for sure... whether with welding or even a bolt together trailer...lots of different options. and many trailer tops are actually mostly made of wood so you'll have lots of options to think about when the time comes :D

    • @VochosGranja
      @VochosGranja 6 років тому +1

      For sure, Thanks Joe :)

  • @justadddirt
    @justadddirt Рік тому

    Just wanted to thank you for all the tips and tricks learn here. I studied your videos and used what I could to start my build. 👍🏻

  • @ToddLarsen
    @ToddLarsen 6 років тому +8

    Great build so far and I can't wait for part 2. Thank you for sharing and as always Keep Building 👍

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      thanks Todd! I cant wait for the rest of the parts too... been playing mr mom the last couple of days so no more work has gotten done yet

  • @Funtimes670
    @Funtimes670 6 років тому +1

    I have been wanting to build a enclosed utility trailer. I am going to follow along and see what ideas I could use to do it someday!

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      Okie Joe sounds good Joe! Hopefully some of this process will translate well for your project😀👍

  • @SynthVerseSounds
    @SynthVerseSounds 6 років тому +4

    In it primary stage it looks it will turned to be a fabulous trailer..so best of luck for the rest of the project..

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Thanks Sounak! I'm hoping it turns out well too! :D

  • @MITradesmen
    @MITradesmen 6 років тому +2

    This is the UA-cam video I've been waiting for. Please show detail in the electrical and weatherproofing sections. Thanks

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      I will do my best James! The electrical and the weatherproofing have both been on my mind a lot... I want to make sure to do it right the first time. :)

    • @MITradesmen
      @MITradesmen 6 років тому +1

      homesteadonomic, That's why I'm watching this build closely. I know you'll do it right. Keep up the quality videos and builds. Nice job!

  • @Markam248
    @Markam248 6 років тому +5

    Cool project. If I were you I would skin the outside. Then add the insulation and wiring. Then skin the inside. Other wise you will have trouble running and hiding the wires. Just my two cents.

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      thanks Mark! that's pretty much the plan... get the outside skinned, then run wires/water lines... then spray foam or foam board... still debating and after that I will do the inside:)

  • @markl7602
    @markl7602 5 років тому

    Watched this series when it was new, watching again now. Thanks for the resources Joe.

  • @kenk2345
    @kenk2345 6 років тому +3

    ...wondering if it might be prudent, to add some reinforcement iron...around those leaf spring hangers? Lots of repeating stresses at those places, as it endures road time. Weld extra angle iron in the channel in that area?

    • @homesteadonomics
      @homesteadonomics  6 років тому

      That's been something I've been considering... still not totally sure as the walls, once skinned will actually add to the total frame strength. I'm going to run my weight numbers again just to see and make sure :D

    • @mattlewis7787
      @mattlewis7787 6 років тому

      I had a similar concern everything else looks great but would love to see those frame rails boxed in just my 2c

  • @sheldonberg125
    @sheldonberg125 3 роки тому +1

    Love this build. I would love to do this but I’m a lousy welder and I don’t really have the space to do this. Maybe one day. I always admire people who build stuff and I like to build things myself. This is a great project and very nicely done!

  • @davidgenthnerjr4995
    @davidgenthnerjr4995 6 років тому +6

    I wanna build one of these caravan type trailers except I want mine to have the same off-road capability as the truck pulling it for them days when I wanna stealth camp in a remote location.

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Now those are cool! I've seen some off road campers that are just straight up slick! slideouts, extra suspension, everythign alumimnum....super cool stuff :)

  • @weikeong25
    @weikeong25 6 років тому +1

    Cant wait to view the complete project

  • @EddyGurge
    @EddyGurge 6 років тому +11

    It's amazing. You are such an inspiration for me.

  • @triplebbb2862
    @triplebbb2862 6 років тому

    I’m glad to see you making more videos.

  • @OFFGRIDwithDOUGSTACY
    @OFFGRIDwithDOUGSTACY 6 років тому +15

    S M A S H another great build!

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      haha.. .THANKS!!! It's been rattling around in my head for a couple years now and so fun to actually be cranking it out :)

  • @buddy8225
    @buddy8225 6 років тому

    In all my research on campers and travel trailers, I have found options or standard features I dont have a need for. So I thought maybe I should build one. Voila you made a video of how to build one. Thanks, can't wait to see the next video. 😁

  • @johnhunter273
    @johnhunter273 6 років тому +3

    Been wondering where you been. Cool project. Can't wait for tge next vid!

    • @homesteadonomics
      @homesteadonomics  6 років тому +1

      lol... yes, it's been about 2.5 weeks... was planning on having this up about a week ago and then my pump house died on me... had to order parts and replace the pressure tank, pump, get a water delivery, etc,.... before I could finish up the welding :)

  • @jack317
    @jack317 6 років тому

    Wow. A big box store for metal!

  • @chrisp755
    @chrisp755 6 років тому +8

    Wow ! Can't wait for next video!

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      thanks Chris! This project has been on my mind for the better part of the last couple years.... I can't wait to put out the next 4-5 vids on it too!! :) thanks for checking it out Chris!!!
      Joe

    • @adityaanurag1847
      @adityaanurag1847 6 років тому

      !!!wow I can't waiting 4 next video,

  • @babypxcamper4078
    @babypxcamper4078 2 роки тому

    So hope our square drop camper build goes this well

  • @evantaitt2031
    @evantaitt2031 6 років тому +3

    As always great video.,! 👍

  • @ebudrow1
    @ebudrow1 6 років тому +1

    As a veteran of many trailer builds may I say “Looking Good!” For lights, think LED. Smaller, more reliable and less energy needed.

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks Eric! I appreciate that! yes, LED's for sure! this first stage was mostly just me creating but the next stages I've been doing a lot of research on the various aspects like siding, insulations, wood prep, etc,... at a forum called tnttt.com really cool place and tons of cool teardrop builds from folks there. I'm guessing you might be familiar with it on your trailer builds :D

    • @ebudrow1
      @ebudrow1 6 років тому

      homesteadonomics actually I am mostly a cargo/equipment trailer builder but I will definitely check out the forum. I have have wanted to do something like yours for awhile but with an odd twist or two.

  • @tonycostello4452
    @tonycostello4452 6 років тому +3

    Have you thought about aluminium studs instead of wood for the wall. Lighter in weight and not truly used in structural support.

    • @homesteadonomics
      @homesteadonomics  6 років тому

      I have thought about aluminum... but will go with wood just for ease of mounting mostly. I don't want to have to do rivets for the interior ply to the aluminum. But it is tempting as aluminum is so great with weather and long lasting. I will be doing aluminum for the outer skin though :)

    • @tonycostello4452
      @tonycostello4452 6 років тому

      homesteadonomics then you could go with metal studs and use sheet metal screws. Whatever you choose it will be awesome. Love your work.

  • @sebastianmalmstrom3547
    @sebastianmalmstrom3547 6 років тому +1

    I honestly just came here to see how you would solve that bended part, haha. But now im hooked. Very nice build man.

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Sebastian Malmström thanks sebastian! Can’t wait to get this thing rolling😀

  • @kdwashington8584
    @kdwashington8584 6 років тому +3

    Awesome 😎 blessings

  • @Josh-vk9gs
    @Josh-vk9gs 5 років тому

    I just came from "High Dollar Hobo's" you tube channel. He is building a camper from the frame up. He is doing his out spare parts and wood. Im going to send him this video. He would probably like it. Great video! Looks bad ass! Love to see more.

  • @furgulley8077
    @furgulley8077 6 років тому +7

    This is funny timing on the upload of this video. I've been researching ideas to scratchbuild a teardrop camper for the last week. I know you're not building a teardrop but a light travel trailer nonetheless. How many people are you aiming to be able to sleep in the camper and are you doing an indoor wet or dry bath? Looking forward to the rest of the build!

    • @homesteadonomics
      @homesteadonomics  6 років тому +3

      Thanks for checking it out FG! if you're looking at TD trailers then you have probably been checking out tnttt.com... super awesome forum with lots of great ideas. I plan on mentioning them in the next video as I've gotten a lot of useful info about windows, doors, insulation, electrical, sealing wood, etc,. from that place.
      as for sleeping.. the potential will be 4 tightly and 3 comfortably. couch bed in back for my wife and I... and a breakfast nook/bed in front for my daughter... but also a mini loft for her back by us while she is still little (she want's it for fun more than actual sleeping....lol

  • @airborne501
    @airborne501 5 років тому

    I am really impressed you took on a project like this. Wow...

  • @ARepublicIfYouCanKeepIt
    @ARepublicIfYouCanKeepIt 6 років тому +6

    This is going to be an amazing project! Looking forward to video series through completion!

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks John! I've been thinking about this project for quite a while... really fun to actually be getting it going :)

  • @TinyAcresFarmHome
    @TinyAcresFarmHome 6 років тому +2

    You sir cease to amaze me with your skills. Such an inspiration to me. Awesome job so far!

    • @homesteadonomics
      @homesteadonomics  6 років тому

      Thanks so much! It's big but fun project and I can't wait for it to become a part of my families camping traditions :)

  • @ELDIESTRODIY
    @ELDIESTRODIY 6 років тому +7

    Dang I wish I had some similar to industrial metal supply here In Puerto Rico it's a pain to get metal like that

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      Oh man, I can only imagine. Hope you guys are doing as well as you can down there after the storm. I heard that some areas have had a lot of recovery and some have had very little. Wish you the best!

    • @MattOGormanSmith
      @MattOGormanSmith 6 років тому +1

      www.google.com/search?q=metal+supplies+puerto+rico
      about 883,000 results

  • @omorin34
    @omorin34 3 роки тому +1

    I don't know what is more impressive, the trailer or the father in law.

  • @lebronjordan802
    @lebronjordan802 6 років тому +7

    Nice job Joe! 👍👍👍

  • @carethai
    @carethai 6 років тому

    Thank you for sharing. It made me understand more of how to build a trailer.

  • @pauli6570
    @pauli6570 6 років тому +5

    01:31 Sorry but my kids heard a$$hole....not axle. I told them listen more carefully 😂😂😂

    • @homesteadonomics
      @homesteadonomics  6 років тому +2

      lol... tell them my wife and mom would have my backside if I posted something like that....lol... but they did get me to re listen to it again ;D