How to install keyless entry to your car
Вставка
- Опубліковано 8 гру 2020
- Install in Mitsubishi adventure gls
We just bought this at Shopee.
Soon, we'll be uploading videos of bought items. X-D
so......
Subscribe my channel for more videos: DIY, Repair, Maintenance, etc.
FB: / vin.autofix
IG Username: au2fixvin
#vinau2fix #Keylessentry
Quality video! No yammering, straight to the point.
Thanks sir
You just saved me money. Thank you.
Great vid honestly.
Just to be sure, this is lets say the same for other cars that have Central locking?
I have Toyota Yaris.
Nice work
Some questions -Why did you peak the C diagram ? How do we find where the central locking box is on other cars ,or is it always underneath the driving wheel ? I have a celica gts 2002 ,if anyone knows where the central locking box is !
I chose C, because the car is originally equipped w/ Enteral lock.
Ye the common location of C/L is underneath the driver
Nice job sir idol pasout out po salamat.
i really happy whit my one i lots my keys and could not work the locks but now it works a gem 😎
Would be nice if ther was a voice explaining the step by step.
Thanks, I wasnt sure which diagram to use, really bad instructions. Totally different unit but same cheap China crap with same tiny instruction book.. Worked fine on my 2010 Camry base with standard locks. Took a bit to find the wires tracing from the drivers door to the kick plate. I didnt bother with the flashers just the locks.
Can I connect this to the central locking button
Is it any positive wire or it has it own wire
Boss..ano ginawa mo sa alarm.pra mapabilis yung beep..di sasabay sa ilaw yung beep
How did you know that what you tap in with white wire and whote black are open signal and close? In the video you only shown directly you tap it...
How do i know which diagram to choose?
I need help my control box is not working what do you think that is the problem?
Sir, there are two direction light wire, do I just need to connect both of them or just 1? Just like what you did in the video. Thank you.
I have the same question. He stripped both parking light wires but didn't say what he did with the 2nd brown wire... any help would be greatly appreciate!
Don’t mind me asking why did yu pick the C figure ?
is it the same way if I connected to the main switch (??on driver door)
ñññpñp😊
hello po idol.tatanong ko lng po paano ba e connect idol sa ford focus yung sa door switch tsaka po yung footbrake iba po kc yung function ng mga switch po nya idol..pag nag tapak ng footbrake idol walang contact pag naka bitaw na sa footbrake tsaka nagkakaroon ng contact iba yung function ng switch nya idol hendi po kagaya ng mga ibang sasakyan..salamat po idol sana mabigyan nyo po ako ng idea godbless po.
if hindi powered windows boss, okay lang ba to eh install?
How to know what cable open and close doors in the CAR?
Boss, nung kumuha ka ng live wire, bakit hindi mo na kinabit nung tinap ko yung power ng module?
Hi there, you didn't connect the orange wires.. I was just wondering what they are for?
For alarm sir
@@vinau2fix517 you mean the orange wires go to the siren? the 2? both orange/black and orange?
I bought a device just like that, but in my case the siren cable is the same as the power windows cable. It says that you have to program it, connect the siren to that cable but I can't find how it makes it sound
Can i choose any diagram i like .
Bos ano battery type/ size nyang remote?
Hno éstoy instalando una para cierry pero no tengo diagrama
How you know which diagram to use
How to add siren to that kind of remote key? Is it possible?
Yes, connect the brown wire from module to siren
Good day sir. Need ba ng central locking relay para mapagana keyless? Yun kse hinahanap ng electrician ko. Meron na raw alarm naka install nung nabili sa first owner at may keyless remote na rin pero naka kalag yung box. Nung nalagay na niya yung box ok yung alarm pero pag pinindot yung keyless remote di naglock or unlock.
All power yung corolla bigbody
Salamat sa sagot sir
Opo
Hi I purchased an LB- 402 keyless entry the fobs look the same as the ones you have. Can you the battery they take? Thanks for the post I will use it as a guide.
عندكم موقع في السودان
Hi man if you don't mind me Asking do you know how to wire up to where you can have Two Stage Door Unlock? My security says it supports it but it doesn't say how to get into it I think you got a wired up somehow?
hello sir you need to activate the two stage door unlock, both press the unlock & lock bottom for 5sec. or more
@@vinau2fix517 hi thanks for you're reply butt I try that It doesn't work from what I can fine online you have to wire it up with a relay some how butt I don't know how
@@ThePrelude1999 I think it’s better to bring it at auto electrical shop
@@vinau2fix517 thanks butt they don't do that no more because I call honda Dealership and they said they don't give that information out and that They don't work with stereo companies no more And I did talk to a guy that knows about it he did tell me how to do Because I done wire the rest of it up But thanks for any way.
sir pano po i wire yung 5 wires ng main central lock motor pa puntang module??
2 wire lng po kailangan doon sa main open&close signal than connect sa new module
@@vinau2fix517 thank you po, pano naman po kung gusto ko ng switch san ko po iwire 3 tails po yung switch black tapos white dalawa ang isa may stripe na black
does it work for subaru outback 2004
Should work on any car in general
I lost my diagram do you still have yours to show a picture?
See 0:49 of the video sir
Hello, as i watching your video i notice that you did remove anything even the existing control box or mdule... then you add another module for keyless entry... so my question is not going to make trouble or mixing the signal from the new module to the old module..thakns... stay safe...are you Filipino or foreigner? Bcouse i did not hear a words from you...just asking...thanks a lot....
Hello good pm iremove the + line from existing control, and connect to The new control box, I’m Filipino po
Bossing , sori po... Filipino po pala kayo... so pwede pala i remain ang existing module para gumana pa din ang mga ibang function nito? As per info ay yong positive supply lang ang ihiwalay at pwede na at wala ng problema... clarification lang po bossing... salamat sa pagbahagi mo ng inpormasyon...
@@fernandotaracatac5894 yes tama po, nakakonek kasi doon ang ignition para magstart po
ya, why he didnt remove the old one?
Saan niyo po ikinabit yung sa alarm niyo po sir?
Pwede po sa orage or brown wire
Hello sir. Ano po kailangan ko na bilhin para mapagana din yung sa sasakyan ko? Corolla Gli gumagana pa lahat ng actuator pag sinusihan ko para ilock at unlock
Bili ka ng keyless entry sa shopee or lazada maramikang pagpipilian bos
@@vinau2fix517 plug and play nalang po yon dito sa module nitong sasakyan sir?
@@kwn-mrk4742 dependent bos kung pareho sila ng socket sa old module, kung iba bos sundan lng po yung diagram tapos hanapin mu yung open at close signal na wire sa old module
@@vinau2fix517 paano malalaman ang open at close signal? Iilaw pa if e test light po?
ano po color ng parksignal sa module ng central lock
Brown bos
@@vinau2fix517 sa kopo itatap na wire ano color
@@jamescreon8016 gamitin mu ng test lamp bos tapos on/of mu yung switch sa park light, kung saan wire galling sa switch ang sasabay sa pag on/off doon mu I tap po
Kasama po ba sa keyless entry mo yung alarm boss?
Hindi po bos
My car doesn't have the main control box i can't find it 🤦🏻♂️🤦🏻♂️🤦🏻♂️
Boss nag seservice kb. Magkanu magpakabit syu ng ganyan. Honda city 2013
Yes sir, 500 po pag dalhin dito
San area po kyu boss
@@francisbondoc2873 north Caloocan bos
I dont know what is my open and close signal
😢😅
Mahirap naman sundan presentation mo...pang content mo lang yang kasi para ka kumita...
Ok iosa e e brav a la un un video a una persona e
Thanks 🙏 , I have a question
Where is alarm terminal connection come from❓ is it from old relay or new control box 🤷
this guy is mute or what really bad video