How to Make a Race Car Steering Wheel with Prepreg Carbon Fiber [DIY]
Вставка
- Опубліковано 1 лип 2021
- #Carbonfiber #Steeringwheel #buttonbox
How to Make a Race Car Steering Wheel with Prepreg Carbon Fiber [DIY]
How to Make a Prepreg Carbon Fiber Button Box.
Making Race Car Steering Wheel with Prepreg Carbon Fiber. [DIY]
Making BMW M4 GT4 Steering Wheel Replica.
How to make a mold with 3D Printer for prepreg carbon fiber.
HANKUK CARBON
Website : www.hankukcomposites.com
Linkedin : / hankukcarbon
UA-cam : / hankukcarbon
KMP DRIVETRAIN SOLUTIONS
Webside : www.kmpdrivetrain.com/
BMW FXX Racing wheel : www.kmpdrivetrain.com/product...
OMP ALU GT STEERING WHEEL
www.ompracing.com/it_it/310-a...
OTTO P9 PUSH BUTTON
mouser.com/Search/Refine?Keyw...
레이스카 스티어링 휠을 만드는 방법 with 프리프레그 카본화이버 [DIY]
프리프레그 카본화이버 버튼 박스 만들기
레이스카 스티어링 휠 만들기
BMW M4 GT4 스티어링 휠 레플리카
3D 프린터로 프리프레그 카본용 몰드 만들기 - Авто та транспорт
![How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)](http://i.ytimg.com/vi/eq5fILj1TOM/mqdefault.jpg)
This man will one day build a complete M4 shell in his office and I'm here for it. Craftsmanship 101%🔥
Na, it would never fit in his oven.
I freaking love this channel, no stupid intro, no story of your life about this and that, just get to work and get it done!
One thing I learned with casting metal, try to not make 90° angles in castings. Add a few degrees to the walls and the mold will pop the part right out.
Geeeez, your patience knows no limits
Men on a mission...
Expected him to start throwing eggs on it for some reason...
Schematics & PCB Gerber Files : drive.google.com/drive/folders/1OF0iEHbfCqxwMFwK8TWUg17m7dQTzyxD
YASSSSSSSS THIS IS THE VIDEO I'VE BEEN WANTING FOR SO LONG! Good stuff, my dude!
That is some next level artistry stuff. You can't but admire your skill and determination. The finished product is amazing. Bravo sir, bravo 👏
I have literally been looking for a video on this for years, last time was right now!!! Thank you!!!!! amazing work!!!
영상 기다렷는데 오랜만에올리셧네요~!ㅎㅎ 항상잘보고잇습니다
I have been waiting to do this to my car for months and could not figure out how you get quick release paddle shifters… this is amazing. Thank you.
Amazing as usual! Came out perfect!
Hard work but in the end the result has been incredible and it is clear that you have very good knowledge of how to treat carbon fiber and the material you have needed has been 10. Hopefully one day I will know how to do what you have done. great job man!
had to hit that bell i missed this one one the 2nd, the ASMR is the best part by the way. Videos are getting way better too. i love it
Ohhh no way I’ve been waiting for this one!!!
Absolutely insane! Hands from right place!
2000 years later That was classic!!.. Epic efforts on all this my friend! Going to attempting CF on my motion rig.. Cant wait!! DMAX motion sim
Wow!!!! Absolutely awesome. Thank you 🙏
Amazing work as always!
I've been a big fan of your videos for a while now and I spent the whole night catching up on everything you've posted. 😍
Great video! Can’t wait for the next one! Keep it up!
Love it definitely gonna be my guide for my first composites project
와~~~~ 인간승리네요ㅋㅋㅋㅋㅋㅋ 대단합니다!! 엄지척!!!
Everything you did make me feel its so easily
This is just INSANE !!
Love the video! Next time when finishing the 3D printed mold, use black epoxy spray paint. That’s what I did and it worked great!
Damn. Respect bro for your hardwork!!!
영상 기다렸고요~~!!!! 잘보겠습니당
Respect man!
That is a cool steering wheel indeed
중독되는소리와 영상잘보고가요, 재미도있구!! 👏
Love your videos, inspiring :)
Some people are just so talented! WOW!
Very nice work! Maybe I'll try prepreg one day.
Вот почему так долго не было серии)) Супер, продолжай!
This is an epic steering wheel i would love to see it in my car (I don't think i could afford it) you should definitely sold this customized steering wheels for cars this is E P I C
Oh boy, i've been there as well! Kudos to your persistence. Its hard. I know it is. But you did it - exceptionally well! Its done now, but my two cents for your project would have been: start with a positive mold. Less tricky with complex corners such as yours. Draft angles! Can't say for sure, but it looks like you held back on those a bit? Use a specialized filler or prime coat to get rid of layer lines and make sanding MUCH easier + you can achieve a perfect finish straight from the mold. Get (make) a vacuum pump. You can easily build one from a compressor off an old refrigerator or AC unit in a day or two - and comes in very cheap (80-100 bucks max.)
드디어 성공작이~!!!!
awesome work, hope you're wearing a proper filteration mask, CF is dangerous when in dust form from sanding
this. was. amazing.
거푸집도 3D프린팅으로 만들고 오븐으로 굽는거 실화냐...
빨리 떡상하셔서 장비 좋은걸로 사십쇼!
아니 이런 환자분을 알고리즘이 왜 이제 알게한거지 ㅋㅋㅋ 바로 구독과 좋아요 누르고갑니다 ㅋㅋ
amazing work.
Great project! My humble experience shows that any project can have some flaws. And it's great if you can still make great detail even it has some problems first. And your work with 3d model and electrics is impressive as always!)
Hi, Bro!
Thank you for the comment.
Actually, I've made 4-5 molds.
so, I had failed a lot. That was so hard works.
Recently, I am loving 3D design, and electronic works.
My major was computer programming in University.
I hope to develop electronic modules and carbon fiber parts for car.
Thanks for the good comment always.
Thank you bro.
wow, amazing!
yes sir 🙌🏻
진짜로 휠 깎아서 만드시는 장인..
Отличная работа!
10만 구독자 가즈아~~
Sos un genio amigo...felicidades
Bravo !!! From France
Best diy wheel ever
와~ 차에도 그대로 맞네요~
Nice work!
BEST UA-camR!!!
Cool video bro. I like your style man 😁
와... 대단하십니다 👍
Incredible work! Love the attention to detail with the stitching too! 😂
What is that QR you're using? It looks great!
Very impressive!
I lmao at the beaver part 🤣 id be furious
광고 축하드립니다 형님 항상 질 좋은 컨텐츠 제공 감사합니다
amazingggggg all are made by ingenius incredible !!!!
Really amazing. You are awesome
Superbe réalisation !
10만 축하드립니다
Salut ! Content de revoir une vidéo !!
C'est quali de ouff
Probably the nicest homemade wheel I've seen yet the quality is insane lol I want to ask you to make me one and how much would I have to pay you haha
이 형 진짜 손재주가 와우
have you used petg to make the molds? works great, petg is non-stick
와 진짜 금손..
도데체 못하는게 뭔가요? 대단합니다. 정말 배우고싶습니다
입쩍벌....엄지척~!!!!!!
Loved watching this and amazing work, though seeing you cut it with the dremel indoors without sleeves on... I'm getting itchy already
would you make another carbon cover since you have the mould. would love to buy one!
한국인이라 자랑스럽습니다ㅎㅎ
Oppa is back 😳
형 나중엔 M4한테 카본휀다도 만들어주세여..!! 형차는 흰색이라 잘어울릴거에여!!!
Genius
Do more: carbon TV, carbon chair, carbon sofa) Nice video)
국뽕이 차오른다~ 대단하심다! 근데 버튼은 어디서 구하셨나요ㅋ
게임용 레이싱 휠인줄 알았는데...
갑자기 차량용 멀티펑션 스위치가 보여서 헉~~~!!! 했습니다.
언제봐도 카본은 진리군요...
Man I'd love you have one on those for my modded out EcoBoost mustang. Very nice!
Do you make any specific orders sell your merchandise.
bravo!
This is awesome....greetings from Germany.
Can you do a Carbon Visor Zylone Panel for Arai GP6 Visor like Formula 1 Drivers?
Very nice work 🥶💧💧💧💧💧
Just like DTM steering wheel :) i like it so much
Can I love your videos
탐납니다!!
além de muito intuitivo, ainda é muito engraçado kkk
Excellent
you can try printing the mold verticaly so the carbon fiber comes get off more easily
Superb Craftsmanship
Bro you are one fawking talented guy... and i want that wheel LOL
황금손!👍
난 모해. 이 형님 짱인듯
진짜 존경스럽다.
시뮬주행 인제에 레카로 시트까지 ㅋㅋㅋㅋㅋ
혹시 공대 출신이신가요????
안녕하세요.
공대출신은 맞지만 기계관련 전공을 하지는 않았습니다. ^^
ว้าวววว อยากได้แบบนี้
What different between epoxy resin and polyester catalyst ?
Nice work
It very vey very cool..
와 너무 잘 만드십니다!!
과정을 전부 독학하신거에요?
안녕하세요.
저는 카본섬유와 복합소재에 대해서 제대로 공부를 한 적은 없으며,
보통 유튜브와 인터넷을 통해서 자료를 찾고 있습니다.
유튜브와 인터넷에는 생각보다 많은 자료가 있습니다 ^^