Considering that you don't sell you proprietary nozzles with the thermistor and heating element attached all you showed was how to clean and not to change nozzles. Please make a video on how to change the nozzle with a different one.
Well nice vid but please show how to transplant the sensor and the heat bracket i figured out myself but not all people can that without breaking something so please show us how :)
Hi, replacing the 0.6mm nozzle needs to be done under heat, you can use the same pliers that removed the support to hold the buckle and remove it, at least I did, if you have other questions, you can contact sovol support
I've removed the clip, but the heater with the cable seems to be glued on the nozzle. How did you remove that? My new hardened nozzle doesnt have the heater. Did you had the same issue?
@@QiXiao-f7j I heated it up and used a spatula. It fell off. The new nozzle is mounted and the Printer is awesome. Thank you so much, for your help. 🫶 I thought about doing this, but didn't want to damage it. Got the printer last friday.
I have an extrusion inconsistency Issue. I already checked the extruder gears, tighten the extrusion clamp, also replace the nozzle, but the issue still there. I really need an assistance to fix that.
Thank you so much for buying from Sovol, and I apologize for all the inconvenience. Did you already send an email to info@sovol3d.com? If not, please send the above situation with videos and pictures and your order number, and we will check with the engineers asap.
why would you ship the printer with an extra bare nozzle, a nozzle kit available on your site, and NOT show how to swap those?!
Considering that you don't sell you proprietary nozzles with the thermistor and heating element attached all you showed was how to clean and not to change nozzles. Please make a video on how to change the nozzle with a different one.
Well nice vid but please show how to transplant the sensor and the heat bracket i figured out myself but not all people can that without breaking something so please show us how :)
exactly!
It's in a different video! ua-cam.com/video/7SLqB-zmivc/v-deo.htmlsi=erPQoaOBJ9SDRkoU&t=72
and.. using the cleaning tool the very first time, it got totally stuck inside for some reason??
How to replace the nozzle from 0.4 to 0.6? How to remove the clip holding nozzle and heater together?
Hi, replacing the 0.6mm nozzle needs to be done under heat, you can use the same pliers that removed the support to hold the buckle and remove it, at least I did, if you have other questions, you can contact sovol support
remove the clip
I've removed the clip, but the heater with the cable seems to be glued on the nozzle. How did you remove that? My new hardened nozzle doesnt have the heater. Did you had the same issue?
@@aeroxR46 I used a spatula to pry it open, or you could just heat it up for a while and then pull it out? Please be safe.
@@QiXiao-f7j I heated it up and used a spatula. It fell off. The new nozzle is mounted and the Printer is awesome.
Thank you so much, for your help. 🫶 I thought about doing this, but didn't want to damage it. Got the printer last friday.
How do you get the clips off the nozzle heater?
Id rather see it done than try and break something¬!!!
You can use pliers to hold it and slowly pull it off
I have an extrusion inconsistency Issue.
I already checked the extruder gears, tighten the extrusion clamp, also replace the nozzle, but the issue still there.
I really need an assistance to fix that.
Maybe the throat tube is blocked by a filament?
@@QiXiao-f7j thanks. Let me check
check tension knob screw on extruder
Useless nozzle design, it falls apart... and then you can't replace the glued in stuff, thermistor, and the other pad thing... show how to do it.
Thank you so much for buying from Sovol, and I apologize for all the inconvenience. Did you already send an email to info@sovol3d.com? If not, please send the above situation with videos and pictures and your order number, and we will check with the engineers asap.
@@sovol3dsupport I am more interested in a video as to how to replace the actual nozzle, remove the thermistor and the heating element. Thanks.
@@gMan1971 They've just posted a video about it a few days ago: ua-cam.com/video/7SLqB-zmivc/v-deo.html
@@gMan1971 AGREED!!!!