Nope I've got a 2004 2500HD 6.0 and don't have too. Maybe cuz it's a Duramax? Ik my grills the same & I put bottom light in 1st didn't think would go in last lol but didn't look either. Oh maybe that's why he took the grill out! Cuz I'm almost positive u couldn't get bottom light in last with grill in.
My guy is 100% correct. I have a 05 1500 and didn’t have to remove the grill assembly. What bothers me is there is no mention of the vent tabs you can unscrew to vent moisture from the light. also not one person who makes a video installing the U bar’s show how to adjust the low and high beams. 🤦🏽♂️
Just got these headlights and they look amazing but i have a question. There is an adjuster for up and down but is there an adjuster for left and right? I can't seem to find anything that'll move them left to right. I only see one adjuster.
Nice video. However, they work with park lights and not active DRL. Do you still have you DRL bulb in and does it come on normally during daylight driving? I noticed the LEDs strips didn’t light up until I activated headlights or Parklichts. I followed your instructions to the letter. Thnx
I have one problem with the lights maybe you can help me out? The DLR on the bottom lights work perfectly turn signals and everything but the top DLR Will not come on at all everything is wired as you said, but both upper unitsDLR do not come on. Help please thanks.
How ya feelin now? Lol. I’ve had these lights for about a year now and they look like shit. The plastic is yellow and barely translucent and half my LED’s are out because of water leaking inside
Loved the video. You probably know by now, but you can do all that work without removing the grill. My question is how did they stand up so far? Did you have any issues with the LED trim bar burning out? Would really appreciate a reply. Thanks in advance!
Is it the same wiring for a chevy Colorado 2010. I have the same headlights but don’t want to wire it wrong. As long as I tap it into the turn signal they should be on all the time my headlights are on? Or should I put it into the low beam.. I think the turn signal is on top in the Colorado. So it would be opposite right? Go from bottom and feed it up top.
Paul Hale they turned out really good, I think I tied them into my running lights. They didn’t fit really good into the slots that held them into the body, so I had to rig it to stay in but they look good. It won’t let me post a picture or I would.
Can you install the lights and not take the grill off? A deer decided he wanted to bust up all the headlights and everything but the metal bumper on my canyon. I just want less of a headache until I can get the parts to repair all of it correctly.
Installed mine today. Great look. Install was a breeze. Replaced all my bulbs with LEDS as well. My only question, is there a way to get the LED parts of the headlight and turn signal housing to run while the DRL is activated? If I run a jumper from DRL hot to the hots on the LED’s will this activate them all the time but still allow them to blink when the blinker is activated?
You probably don’t have a good connection from your red and black wires on top headlight housing to the the lower 194 bulb wires. Check to see if you have any power on the hots (just use a light circuit tester).
I want to know how to install the headlight buckets behind the headlightsI want to know how to install the headlight buckets behind the headlights I gotknow how to install the headlight bucketsknow how to install the headlight buckets
I agree. I think instead of splicing into the park light or any other wiring, just run the DRL off an ignition switched power so they are always on when key is on and will not blink.
I have done this multiple times. Absolutely not necessary to remove the grill.
Great video! Only 17 and did it by myself with your instructions. Didn’t think it’d be that easy! 😁
I have questions on the wiring do I need anything?
@@doughhunta3105 nope I did it today it took me like 15 minutes lol
did u use t taps like on vid?
Does it come with the tabs already on their for the daytime running lights
🛗
I have a 2004 Avalanche and you do not need to take the grill out to remove the upper and lower headlight.
Nope I've got a 2004 2500HD 6.0 and don't have too. Maybe cuz it's a Duramax? Ik my grills the same & I put bottom light in 1st didn't think would go in last lol but didn't look either. Oh maybe that's why he took the grill out! Cuz I'm almost positive u couldn't get bottom light in last with grill in.
My 1500 font require it
My guy is 100% correct. I have a 05 1500 and didn’t have to remove the grill assembly. What bothers me is there is no mention of the vent tabs you can unscrew to vent moisture from the light. also not one person who makes a video installing the U bar’s show how to adjust the low and high beams. 🤦🏽♂️
We do that to make room for all the wiring.
They look good. How ever I think I would wire the DRL to the LEDs only and then installed a second turn signal bulb in place of the original DRL.
Yooo I just bought these headlights waiting for them to be delivered!! Thank you soo much for the Real Installation and how to DIY 🙏
Just got these headlights and they look amazing but i have a question. There is an adjuster for up and down but is there an adjuster for left and right? I can't seem to find anything that'll move them left to right. I only see one adjuster.
There is only the one adjuster
gotta love how easy chevy made these to take out
Yup I agree
these are the best trucks ever made
Yeah, but when that plastic cheap made grille gets old and brittle, it'll easily break when trying to remove for whatever reason.
If I understand, you have to run your parks or headlights to have the new LED running lights lit up?
It's been 3 years. How have they held up? Do they leak or fog up?
When the headlights are turned on( high or low beam) will the LED strips still be lit up?
Yes, as long as the lights are on the led strip will be on
My top strip not working
Sherwin Woolfork did you ever get it fixed? Having the same problem.
@@orlandopadilla3203 me too did you find a solution
@@antoniomireles3079 im gonna see if I can tap into another location. Im dealing with this rn
Did the top headlight bulbs come with it? Mine did not
Is there a way you can install so that they turn on with the auto light come on at night?
Is there any splicing? Or do they all come like that?
Nice video. However, they work with park lights and not active DRL. Do you still have you DRL bulb in and does it come on normally during daylight driving? I noticed the LEDs strips didn’t light up until I activated headlights or Parklichts. I followed your instructions to the letter. Thnx
I don’t think he had daytime lights plugged up r didn’t start it to see but those he’s showing r parking lights
When u unlock and lock the truck do the strips light up? Because they are tapped into the blinker
I have one problem with the lights maybe you can help me out? The DLR on the bottom lights work perfectly turn signals and everything but the top DLR Will not come on at all everything is wired as you said, but both upper unitsDLR do not come on. Help please thanks.
flip upper wire connection.
@@jivy29 what do you mean bro? Got same prob
@@enriquegonzalez9382 you solve this issue???
Are these the same ones as the ones on yita motor website
Any issues with moisture getting in these housings?
The Sundae Drive reseal the silicone them when you get them . Thats what EVERYONE does to keep moisture out
@@headon434 can u elaborate with silicone? plz i had ordered some and it rain 2 days later and my bottom 1 got fogged up
.
Hi @YITAmotor... What type of light bulbs may use for that kind of lights?
What is the small black adapter piece called on 6:06?
When you turn on the truck are the led strips gonna be on as your running day lights or do you have to remotely control the switches
what are those plugs called you used to plug into the blue wire?
T taps
@@thesaintlcfr the T taps come with assembly? or need to make by self?
@@wuwade33 you can buy them at Walmart, they do not come with the assembly
I have these insalled but only the bottom drl are on not the top one's can anyone help me with this
Thanks for the video , helped me a lot love these new lights...
How ya feelin now? Lol. I’ve had these lights for about a year now and they look like shit. The plastic is yellow and barely translucent and half my LED’s are out because of water leaking inside
Does it come with the tabs for the running lights
The led bar does dim out though I have the lights but there still awesome 😎
excuse me do you know how to turn on the light white next to turn signals? or what is them function?, best regards
Wheres the plug at 6:08 all I have is black and white wires. Is there an adapter to use
Where you able to find it ?
@@cristianmonsivais6499 I just twisted up the wires instead and it's working fine ever since. No need for it
LOOKS GOOD, CLEAN WIRING
I think I'll take it to the shop ,it looks to easy.
Those headlights look really good keep up the great videos 👍
So why splice in turn signal and not parking light?
I don’t think it’s spliced correctly
Wish I had these black housing ones instead of the chrome ones I have right now
What brand bulb are you using.
Is there a relay you need for this
Dude show more of the new look there badass
So I have the exact same lights, I wired it up exactly and now I have no brake lights Idek how the correlates
Are they bright at night? I want to buy some but I hoping they are bright enough to go off-roading
Hi Jason,of course ,they are bright at night,you don't have to worry about it. thank you very much.
@@YITAMotor are they both the black housing?
@@YITAMotor will this work for a 2002 Chevy avalanche with body cladding???
What type of head lights did u use
Beautiful headlights.
Loved the video. You probably know by now, but you can do all that work without removing the grill. My question is how did they stand up so far? Did you have any issues with the LED trim bar burning out? Would really appreciate a reply. Thanks in advance!
Since the top lights are yellow can you switch them to white
Great look & great video too. Thanks keep up the work
If any pictures of my wiring please let me know more than happy to submit them. Thanks
JG & Airguns can i get the pictures?
Thanks for the help I was able to fix it the problem was the wire conectores were not piercing the truck electric wires. But it’s all good know.👍🏽
Hey buddy could you send me them?
Hey man can I get those pictures?
@@jgairguns4332 send them my way please
What do you use for the red ans black wire
How are they holding up?
What Brand of Wheels and Tires are on the White Truck?
what is that tool that locks the top headlights in place? mine doesnt have ut
cant wait to get mines in!!!
Where did you get those housing at
how do you install the headlight buckets not the headlightshow do you install the headlight buckets not the headlights
What about the for the 02 Silverado’s??
cristian Sanchez I found out 99-02 have small headlight then 03-06
@@albertquintero5412 so it won’t work ????
@@theinfamousjunebugg didn’t know bout Silverado that much for longtime ago
My led strips burned out after the second day and am wondering if there is anyway to fix this?
Yeah buy some new ones
But that sucks bro I feel for you
Can you get the bottom lights separately?
Any yellowing or discoloration yet? I bought some new headlights for my 05 Silverado 1.5 years ago and they're yellow as can be and faded.
a good practice is to put the bulb in a straight line to help with moisture like an "I"
@@SuiiT-ln4dm I'm not sure what that has to do with fading or discoloration? Thanks though
Love signals flash
I have a question, so I just installed mine today the low beams were working perfectly then one side went out is there a way to fix that?
You sure the one side isnt just your brights?
You dont have to remove the bumper to change out the headlight/parking lights
Pablo 808 he didn’t remove the bumper lol
Francisco García. Pienso que quizo decir la parrilla...???
Do the led light strips stay on with the day time running lights and when the headlights are on?
Mine don't stay on with the DRL, theyre on with the parking lights on and headlights
Turns out it was my ground
Sorry wrong comment
Do you have to take the grill off to take off the lower lights?
Nah you don’t
Is it the same wiring for a chevy Colorado 2010. I have the same headlights but don’t want to wire it wrong. As long as I tap it into the turn signal they should be on all the time my headlights are on? Or should I put it into the low beam..
I think the turn signal is on top in the Colorado. So it would be opposite right? Go from bottom and feed it up top.
How did yours turn out? I've been looking at getting them for mine.
Paul Hale they turned out really good, I think I tied them into my running lights. They didn’t fit really good into the slots that held them into the body, so I had to rig it to stay in but they look good. It won’t let me post a picture or I would.
@@daltonleatherwood3858 Thanks for the reply!
@@daltonleatherwood3858 Did you get yours from dna motoring?
Paul Hale I think I got them on eBay but from that company
What’s the paint code to the Silverado you installed the lights on?
Where I can get the lights?
Where can I get that male adapter that goes into the socket where you took off the small bulb
Where do u get it cuz im installing mine rn but i just notice that
@@Gentlemens_club6 Where did you find the adapter?
Where you able to find it?
Love them
Looks 🔥
How do you ajust or aim these ?
Screw on top of hiuse for vertical adjusting
Can you install the lights and not take the grill off? A deer decided he wanted to bust up all the headlights and everything but the metal bumper on my canyon. I just want less of a headache until I can get the parts to repair all of it correctly.
Yes
Hey man, the place where I push the clip of the new headlight into broke and now the headlight won’t stay in place. Any suggestions?
duct tape fixes everything 😂
Installed mine today. Great look. Install was a breeze. Replaced all my bulbs with LEDS as well. My only question, is there a way to get the LED parts of the headlight and turn signal housing to run while the DRL is activated? If I run a jumper from DRL hot to the hots on the LED’s will this activate them all the time but still allow them to blink when the blinker is activated?
Can you recommend bulb brands?
I want those for my silverado
My turn signal wire got weak wire how should fix it
Are yours still working ?
Cool video looks nice thanks 😎
Do you have to tap in to anything
My top LED strips aren’t working but my bottom ones are. What do I do to fix this?
You probably don’t have a good connection from your red and black wires on top headlight housing to the the lower 194 bulb wires. Check to see if you have any power on the hots (just use a light circuit tester).
These look nice af
Its a great video 👏🏻
Appreciate u, looks great. 🔥💯
I can't find a black OEM grill because I don't like the chrome that I have. Should I just prime and spray paint?
Chrome looks clean
Did you ever painted it?
I plastidip mine
@@eldelacolon1a I did I just never clear coated it to match my bumper and it looks pretty good actually haha
Does the package include the t-taps?
Mine didn’t
mine didn't.
what size t taps
Where can I get those blue connectors
Any luck finding them? I need those too
Jaystonishing sameeeee
TICONN 240pcs T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case www.amazon.com/dp/B07MLPBPW5/ref=cm_sw_r_cp_apa_i_dYSMDbY5MB71W
Do your Daytime running lights still turn on and if so can u still turn them off with the switch inside cab
What type of hid bulbs do you use?
Top led headlight not working
When I turn the lights on the bottom led lights don’t light up all the way. Am I missing something?
I am having the same issue! I had them send me a replacement and it still inst working right. Did you ever figure it out???
Having the same issue as well but mine it started happening when i replaced my tail lights with led tail lights
Clean.
My right lightbulb went out how do I change it ?
Bro my left one went out and I’ve had these headlights for 1 week idk how to fix it have u? Please help
Wouldn't it be easier to insall the bottom first?? Then the top??
Danny Quijada wayy easier
Is there a way to wire them so the led bar comes on with the switch on Auto ?
you can wire it to turn on with the fog light button that’s what i’m going to end up doing
ua-cam.com/video/NhTlUjMSLqw/v-deo.html
I understand what you’re saying, but that means your fog lights and running bar are going to be on at the same time
To connect to the day time my lights didn't come with it
Was removing the grille really necessary?
No, absolutely not.
🤦🏻♂️🤦🏻♂️for quality video image purposes ..it’s a tutorial cmon guys. Give him a break
btw for anyone installing headlights you dont need to remove the grill
Thanks
I want to know how to install the headlight buckets behind the headlightsI want to know how to install the headlight buckets behind the headlights I gotknow how to install the headlight bucketsknow how to install the headlight buckets
the same for installing it on a halftime 1500 Silveradothe same for installing it on a halftime 1500 Silverado
Looks better without the led’s blinking...
I agree. I think instead of splicing into the park light or any other wiring, just run the DRL off an ignition switched power so they are always on when key is on and will not blink.
Would of been better hooking them up to the fog lights. Or tappin into the fuse box. Looks funny connected to the turn signal
That would make no sense hooking them up to fog lights. Then when you turn your brights on, they go off. You want them constantly on.
@@grimreapercmn4uthat’s why you do a high 6 mod. So all of them stay on with hi beams
I put these on my truck and my taillights don’t light up what could be causing this
The Clueless Michigander A broken fuse in the fuse box
Turns out it was the ground
@@thecluelessmichigander8268 I just got them install yesterday and my taillight aint working, what ground are you talking about?
Yea what ground ?
David Orozco I had to ground the top lights on the body
How much were they? Thanks
Usually 100-200 something dollars