Over cleaner everything! Works so well it's all I use. Just don't leave it in plastic intakes too long and it leaves a funky finish on aluminum you'd have to buff out but I just paint all my stuff anyways lol
Excellent video as always. Can't wait to see this thing hit the road. My 88 restoration was put on hold sadly so seeing videos like this are always great to see.
Been following you since Hawn's beginning bc I have a cat eye project but seeing you add a fiero to the mix is extra bc I also have one I'm doing the turbo ls4 swap in but with stock auto trans. Passenger truck manifold works well as the rear solution, just use stock ls4 front and modify the crossover and merge into your turbo flange wherever you decide to place the turbo.
I quit Soc.Net/media/etc. years back cause it sucked for my lifestyle... and I'm 40. What I can say is I wake up at 2:15am to watch Cleetus cause I seriously lol. Then I scroll to your channel cause; you aren't rich, you inform, your real, and your music is dope. Don't lose your enthusiasm, its winter everywhere bro. I think your shit will pop off. Keep it up, Cleetur did..
Josh what does the f40 transmission come out of and year... I've got to different friends with transmission shops and we pull alot of transmissions from our pull apart junkyards and can possibly find you one
Brotha I can't wait for that fiero to get done about to be one wild Ride and I here you on being broke on parts hahaha I also have a big parts buying problem LMAO 🤣😂
if you ever do decide to go the g6 f40 swap if you get a parts car, know those are getting extremely rare being there was only 3500ish made, willing to drive out and buy what s left of the powertrain, cv axles, clutch pedal, shift controls, etc that you dont use as everything is discontinued with very little off the shelf aftermarket support . just mention me here or where ever. thank you, ps that is gonna be a riot to drive once your done
how about this idea.. stack injection... you got that knarly v8 behind your head? give yourself some induction noise. solid cam and headers and itll howl and int hat car light up the wheels. you already got a small turbo car. dont make another
Its just the point that I would be doing 90% of the work that would be needed to turbo it, so why not make an oil line and a couple pipes? Plus, its my wife's car and her Focus ST had a loud blow off valve that she liked
Boy oh boy this thing is gonna be nasty. It might make a good autocross/road race build. Besides that weird rear end push you get on rear engine cars while cornering. But with it being fairly lightweight it would be a zippy little car tbh.
@@SniderTron3000 I'm not sure if its still available but there was s suspension package that mostly fixed the snap oversteer that these suffer from.. if it where me I'd just try to remember no sudden off throttle in a turn and you should be ok..
Its just one of those situations where you've gotta do 90% of the work that you would need to do to turbo it so why not do the extra 10%? Even if I just left it at like 4psi I think it would just be cooler looking. Plus one of the things Jess loved about her Focus ST was the blow off valve "PSSSHHH!" on the shifts lol
Thats like only watching 1 tv series all the way through until its done. I don't always want to watch Seinfeld, sometimes I want to watch Breaking Bad, you know? Lol
Dude....like your vids but your sound is crap....gotta work on getting you a new mic....Phone turned all the way up and I still can barely hear you speak
This is the second video of yours I've watched and you've won my subscription with the opening joke 🤣
Use oven cleaner on Aluminum to clean it really really well.
Over cleaner everything! Works so well it's all I use. Just don't leave it in plastic intakes too long and it leaves a funky finish on aluminum you'd have to buff out but I just paint all my stuff anyways lol
I'm really excited to see how this build turns out
Excellent video as always. Can't wait to see this thing hit the road. My 88 restoration was put on hold sadly so seeing videos like this are always great to see.
I decline to say how long it took to get the DeLorean joke, not my proudest moment
That's exactly what we was all thinking! I sure hope he isn't just " raw doggin " them valves. 🤣🤣🤣
What did zero say to eight? Nice belt.
Been following you since Hawn's beginning bc I have a cat eye project but seeing you add a fiero to the mix is extra bc I also have one I'm doing the turbo ls4 swap in but with stock auto trans. Passenger truck manifold works well as the rear solution, just use stock ls4 front and modify the crossover and merge into your turbo flange wherever you decide to place the turbo.
I quit Soc.Net/media/etc. years back cause it sucked for my lifestyle... and I'm 40. What I can say is I wake up at 2:15am to watch Cleetus cause I seriously lol. Then I scroll to your channel cause; you aren't rich, you inform, your real, and your music is dope. Don't lose your enthusiasm, its winter everywhere bro. I think your shit will pop off. Keep it up, Cleetur did..
I heard groundup walnut shells cleans up aluminum heads if used in a sandblaster with no real sand of course ☺
A brass wire wheel cup would clean those valves and combustion Chambers nicely without gouging.
That whap whap is called valve laping
RAW DOGGING it is funny cuz you're lapping the valves.... ba da bump ching
An LSA blower would be an easy fix to your intake conundrum 😝😝
Yes turbo fiero ! C8 killer
Love me some rock auto most of my rigs are running some type of parts off rock auto also like 1A Auto too
Josh what does the f40 transmission come out of and year... I've got to different friends with transmission shops and we pull alot of transmissions from our pull apart junkyards and can possibly find you one
It comes out of like a 2007ish Pontiac G6 GTP I believe, and similar year Saab 9-5's and 9-3's
I'll keep an eye on my local junkyards for f40 transmissions.
And aaaaaannnnnooooother one!!!
Lol you will turbo it like you said gonna make it alot easier on a few things when you install the engine
You should build a homemade head flow bench and fuel injector cleaner/ flow bench
Set records in this dude your the one to make a world record pass you do that an people will come...
Muratic acid. One brand name is Zep-alum.
Brotha I can't wait for that fiero to get done about to be one wild Ride and I here you on being broke on parts hahaha I also have a big parts buying problem LMAO 🤣😂
if you ever do decide to go the g6 f40 swap if you get a parts car, know those are getting extremely rare being there was only 3500ish made, willing to drive out and buy what s left of the powertrain, cv axles, clutch pedal, shift controls, etc that you dont use as everything is discontinued with very little off the shelf aftermarket support . just mention me here or where ever. thank you, ps that is gonna be a riot to drive once your done
how about this idea.. stack injection... you got that knarly v8 behind your head? give yourself some induction noise. solid cam and headers and itll howl and int hat car light up the wheels. you already got a small turbo car. dont make another
Lol ... Chrome/shiny stuff = acceptance..
Your jokes are getting better! lol
I use oven cleaner for cleaning oil stains on concrete. It may be the ticket for cleaning heads?
Yeah, oven cleaner works great
Great video
What turbo did u have on the rx-7?
Would the f23 work?
Hey bro what that intake off of?
That things going to fly lol
I keep thinking how good it could be for no prep with like a 4t80e and strong axles lol
Do u have to turbo everything what is wrong with just old fashion hp
Its just the point that I would be doing 90% of the work that would be needed to turbo it, so why not make an oil line and a couple pipes? Plus, its my wife's car and her Focus ST had a loud blow off valve that she liked
Turbo is the best way why not?
I gotta gen4 stud kit with no use
The head bolts showed up like 2 hours after I finished filming and getting the video edited lol thanks though, I appreciate it
Boy oh boy this thing is gonna be nasty. It might make a good autocross/road race build. Besides that weird rear end push you get on rear engine cars while cornering. But with it being fairly lightweight it would be a zippy little car tbh.
Yeah, I would love this to have more of like a protouring/autox type vibe to it
@@SniderTron3000 I'm not sure if its still available but there was s suspension package that mostly fixed the snap oversteer that these suffer from.. if it where me I'd just try to remember no sudden off throttle in a turn and you should be ok..
I would not do a turbo!! Just keep it Ls!! It will still run great!!
Its just one of those situations where you've gotta do 90% of the work that you would need to do to turbo it so why not do the extra 10%? Even if I just left it at like 4psi I think it would just be cooler looking. Plus one of the things Jess loved about her Focus ST was the blow off valve "PSSSHHH!" on the shifts lol
Good thing everyone is not like you and we have our own opinions of what we want to do 🤣
Easy off oven cleaner. Spray it on and let it sit for 5 min. Hose it off, done.
👍👍🇨🇱
You can stop having so many project cars and do one at a time .
Thats like only watching 1 tv series all the way through until its done. I don't always want to watch Seinfeld, sometimes I want to watch Breaking Bad, you know? Lol
@@SniderTron3000 hell yeah
@@SniderTron3000 true i think that is why I have another project.
Dude....like your vids but your sound is crap....gotta work on getting you a new mic....Phone turned all the way up and I still can barely hear you speak
Dawg, Idk what to tell you man. I checked on my phone and my wife's and its loud as heck to me lol
@@SniderTron3000 we need to see about getting you a new mic.....what do you use to record your footage with ? Go-pro or phone or camera ?