Thank you for this (and your previous) video. I finally plucked up the courage to use the iron method on a 3inch watermark on my burr oak dining table and it worked! Honestly can’t see where the mark was. It’s like magic! Good to know that there’s no point trying the “home remedies” and that the Blush Eraser is available if the iron method ever fails. Thank you.
You can also use straight lacquer thinner on lacquer finishes. It will soften the finish and reamalgamate the finish into itself. If the finish is shellac you can do the same process with denatured alcohol. For poly you'll need to strip it.
On the Mohawk no Blush product page, It says it does not work on polyurethane or conversion varnish. Is there a way to test a finish to see what type it is?
Thanks for posting. I have a coffee table that I had refinished but found out after I brought it back home that when it was catching the sunlight it was developing these light marks across the table top. I will try the iron or mohawk to see if that helps remove them, but wondering - will this keep happening as long as the table is in a sunny room? And if so, is there anything I can do to 'seal' the table top? Thanks again - super helpful and hopefully saving me a lot of trial and error with miscellaneous methods.
Questions: can I use theMohawk of Howard’s products on solid track wood to remove water rings (and drops). Not cloudy, just discolored rings? Hope you answer and thank you.
We used hand sanitizer, which made the water stain mostly disappear. We squirted it directly on the water stain, and rubbed it in with a microfiber cloth. We followed that with Pledge spray, also rubbed in with a microfiber cloth, and that took care of the (now just barely visible) stain. So...maybe another technique to try?
In your previous video (2019?) you used a "Blush Eraser". Is that still available or is this basically the same product? Appears to really get the job done - I can't wait to try it on my walnut end table! Thanks for making this video - very informative 😀😀
@@FurnitureRefinishingStudio I ordered the Mohawk blush remover and my first attempt yielded ZERO improvement. :( How long should I let it sit before brushing out?
hey man, and how did you get the white stains in the wood, does it need to be a certain finish on the wood or the water needs a certain temperature or time to soak in the wood, just want to recreate the stains in the wood for a magic trick..
Excellent info! Have you tired the blush retarder on raw vintage wood that has been stripped and still has white ring ( that Oxalic acid did not remove ( because it was caused by heat I believe, not water )?
The iron method worked for me. Thanks so much!
Thank you for this (and your previous) video. I finally plucked up the courage to use the iron method on a 3inch watermark on my burr oak dining table and it worked! Honestly can’t see where the mark was. It’s like magic! Good to know that there’s no point trying the “home remedies” and that the Blush Eraser is available if the iron method ever fails. Thank you.
The iron method worked really good on the white water mark on our dresser.
Wow, the table looks great, thank you
Glad you like it!
What type of cloth is that?
You can also use straight lacquer thinner on lacquer finishes. It will soften the finish and reamalgamate the finish into itself. If the finish is shellac you can do the same process with denatured alcohol. For poly you'll need to strip it.
Good to know. How do you know if your antique table was finished with lacquer, shellac or poly?
I appreciate the information, very informative.
On the Mohawk no Blush product page, It says it does not work on polyurethane or conversion varnish. Is there a way to test a finish to see what type it is?
How hot was the iron setting?
Thanks for posting. I have a coffee table that I had refinished but found out after I brought it back home that when it was catching the sunlight it was developing these light marks across the table top. I will try the iron or mohawk to see if that helps remove them, but wondering - will this keep happening as long as the table is in a sunny room? And if so, is there anything I can do to 'seal' the table top? Thanks again - super helpful and hopefully saving me a lot of trial and error with miscellaneous methods.
how hot should the iron be? ie what setting?
Questions: can I use theMohawk of Howard’s products on solid track wood to remove water rings (and drops). Not cloudy, just discolored rings? Hope you answer and thank you.
nice work. I've had good luck with a heat gun but keep it moving and farther away. Hair dryers don't get hot enough. just fyi
We used hand sanitizer, which made the water stain mostly disappear. We squirted it directly on the water stain, and rubbed it in with a microfiber cloth. We followed that with Pledge spray, also rubbed in with a microfiber cloth, and that took care of the (now just barely visible) stain. So...maybe another technique to try?
where do you buy the mohawk jet spray
In your previous video (2019?) you used a "Blush Eraser". Is that still available or is this basically the same product? Appears to really get the job done - I can't wait to try it on my walnut end table! Thanks for making this video - very informative 😀😀
Yes, its the exact same product. Mohawk now owns Behlen but its the same product. Thank You !
@@FurnitureRefinishingStudio I ordered the Mohawk blush remover and my first attempt yielded ZERO improvement. :( How long should I let it sit before brushing out?
Hi! Do you think the iron method would work on a black wood furniture? And the Mohawk product too on dark furniture? Thanks! Great video.
hey man, and how did you get the white stains in the wood, does it need to be a certain finish on the wood or the water needs a certain temperature or time to soak in the wood, just want to recreate the stains in the wood for a magic trick..
Just leave a glass of ice water on surface. As ice melts it'll leave a ring.
Excellent info! Have you tired the blush retarder on raw vintage wood that has been stripped and still has white ring ( that Oxalic acid did not remove ( because it was caused by heat I believe, not water )?
So what do you recommend for dining table. Wood with finish on it?
Great, thanks!
Steam made it work 5x faster on my table. I think the moisture reactivates the dried section.
Hand sanitizer is what caused my wh8te spots, and I'm here trying to figure out how to fix it. 😂