StroboStomp Mini Instruction Manual | Settings Screen | Part 1 | The Settings Screen

Your StroboStomp Mini has two screens of operation in which parameters can be adjusted. The Settings Screen allows for more detailed adjustment as well as system information.
To enter the Settings Screen, click either the Up or Down Menu button until the Gears Icon flashes. Then, click either the Plus or Minus Value button.
Note: To enter the Settings Screen, the tuner must be muted.
While viewing the Settings Screen, inaction will eventually revert back to the Tune Screen. However, after adjusting a parameter using the Value Plus (+) and Minus (-) buttons, inaction for just a few seconds will revert back to the Tune Screen. To actively return to the Tune Screen, click either the up or down Menu button until the Gear Icon flashes and EXIT scrolls in the lower right of the display. Then, click either the Plus (+) or Minus (-) Value button. Alternatively, to quickly exit the Settings Screen, click the Stomp Switch.
Within the Settings Screen, the following parameters are adjustable:
Output Mode: Monitor Mode, Buffered Bypass, True Bypass
Global Display Color: 10 Default Colors
Power-Up Mute State: Muted, Unmuted, Most Recent
Global Accidentals: Sharp, Flat, or Both
Configuration: Factory Default or User
Auto-Order Presets: On or Off
Play Preset: On or Off
Some factory presets may be switched to OFF by default.
In addition to the above parameters, you can view both the firmware and hardware version of your StroboStomp Mini, as well as initiate a complete factory reset of your tuner.
www.petersontu...