Veto TP-LC Loadout!!! Little tool bag that packs a punch!
Вставка
- Опубліковано 10 лип 2024
- The TP-LC in this video was received as part of the Veto Spring Promo when I purchased my new OT-LC bag to upgrade my plumbing setup. That has worked fantastically and I posted a video awhile back of its bag tour as well as a loadout. This LC bag is just a fantastic size and layout, quickly becoming one of my favorite bags especially for its lighter weight!
These items were purchased by us directly with no special discounts or incentives.
#vetopropac #knipexgang #pbswiss
Check out our new website and get stickers at www.millisconstruction.tv !!
Follow us on Instagram @millis_construction
America’s Number 1 German Tool Distributor! KC Tool
This is where you can get the Zyklop Sets etc, Amazon is iffy on which ones they have and from which sellers unfortunately. Enjoy exploring! They have an incredible site! Be sure to check and see what they have on “Tool of the Day” too!
Get your Wera tools, Wera Advent Calendars, Knipex Sets, KC Swag and Many other awesome tools etc here and they throw in a free bit of thanks with every order, shop knowing every order helps support the channel and our favorite hobby, making tool videos for you to enjoy!
KC Tool
www.kctoolco.com/?rfsn=513734... (KC Tool Affiliate)
Tool of The Day! bit.ly/3zvtMmI (KC Tool Affiliate Link)
Amazon & KC Tool Direct Links for Tools in Video:
Knipex 250 mm Pliers Wrench: amzn.to/3wY78T4
Knipex 180 mm Pliers Wrench: amzn.to/38ZBTiG
Knipex 125 mm Pliers Wrench: amzn.to/3GJXfNl
Knipex 125mm Cobras: amzn.to/3NRfqms
Knipex Cobra XS: amzn.to/3aipQwS
Knipex Electricians Scissors with Crimper: amzn.to/38IvJmR
Knipex StepCut: amzn.to/3tcg0U4
Knipex Electricians Pliers:
Wera Joker Wrench Set: amzn.to/3xbm3uz
Wera Stubby Ratchet Driver: amzn.to/3wWfZVm
Wera #2 Square Driver: amzn.to/3PUML1H
Wera Torx Bit Check: amzn.to/3Mk6GV2
Wera Impaktor 2 and 3 Phillips Bit Check: amzn.to/3PZVC2k
Wera 8004 1/4” Ratchet: amzn.to/3wYBDZ4
Wera 1/4” Extension: amzn.to/3ajhq8u
Wera Mini Ratchet: amzn.to/3NNNzDN
Wera Socket Set with Textile Locking Rail: amzn.to/38ItL5X
Malco 5/16” x 1/4” Impact Bit Set: amzn.to/3xccKun
Spring Tools Nail Set: amzn.to/3xcVyF9
PB Swiss Ratcheting Driver: Unavailable on Amazon. See www.ToolLady.com
PB Swiss Micro Driver: amzn.to/3xcgmfP
PB Swiss Rainbow Driver Set: Unavailable on Amazon, see www.ToolLady.com
Vessel Bit Holder: amzn.to/3NQcmal
Fluke NonContact Voltage Detector: amzn.to/3NfNIQn
Camera Gear Used On My Channel:
Sony ZV-1 Camera: amzn.to/34a4o83 (Amazon Affiliate Link)
Rode Videomic NTG Shotgun Mic Bundle: amzn.to/356ec22 (Amazon Affiliate Link)
MannFrotto Pixie Evo Tripod: amzn.to/31iMjmr (Amazon Affiliate Link)
Rode Wireless Go System for a Lavalier or Boomed Mic
Canon M50 MK II Camera with Kit Lens: amzn.to/3CYOX1T (Amazon Affiliate Link)
Lighting:
Aputure 120d MK2: amzn.to/2VaTz3s (Amazon Affiliate Link)
Aputure Light Dome 2: amzn.to/3BRGJrU (Amazon Affiliate Link)
Aputure MC RGB Light: amzn.to/3i8hbP7 (Amazon Affiliate Link)
Music and Sound Effects are Licensed for our use from Epidemic Sound
Disclaimer, all or some of the links in this description are affiliate links and we will earn a small commission if you use them.
hi mate, thanks for this video, I’m 15 and looking to do an electrical engineering apprenticeship once I’ve left secondary, really enjoy watching your videos on various tools :)
Thanks a lot! I really enjoy making them too! 😁🔥🔧
FYI: Veto bags offers a discount for students be sure to check that out on there website
It never fails.... every video you show a new tool I need to add to my bag lol. I really like when you mention some of the specific jobs you do with some of the more niche tools. It saves me so much time when I run into the same stuff.
Great review Millis! Impressive how much tools this TP-LC can hold! Great selection of PBs :)
Great video! I have been waiting for your TP-LC Loadout for a while since you first showcase it. Always like to watch your video because you always provide so much details of the products that review and those links for viewer to purchase them. Thumb Upz
Thanks a lot! I try to be thorough! 😁
I got the TP-LC when I ordered my drill bag. This has become my favorite bag to take in with me for everyday use. I use the Tech-LC for my bigger jobs but yes this is a great size bag. Love your videos man keep up the great work!
Thanks a lot! 😁🔥🔧
Very nice kit. I'm impressed with how much these bags hold. I set mine up as a furniture/cabinet repair bag. I'm really enjoying it so far.
That would be an interesting Loadout video there! If you do one sometime let me know, I’ll check it out!
@@MillisConstruction here's a short I made a little while ago giving a quick over view: ua-cam.com/users/shortsCBMu-uoGPFk
I'm fine tuning it for a proper video. Been using it to fix some old chairs and dressers around the place.
This chisel holder has been very helpful also ua-cam.com/users/shortsJNo1qN5kvOw
As much as I love your videos, my bank account hates them lol! Thanks for all you do sir, I have gotten some awesome tools from your channel.
Good setup 👍
Great Video Josef 👍
Thanks a lot!
For a little bag it fits A LOT of tools. 👍
It sure does! Enough to really compete with the bigger XL and XXL versions I think. I’m trying to be careful not to stuff it like I have the XXL, it’s up to 41 lbs 😅
@@MillisConstruction hahaha
Nice load out and very nice bag Josef 😎🛠️😎🛠️😎
Thanks a lot Ted!! Did you ever get your Platt stuff??
@@MillisConstruction not yet😂🤣😂, should be getting them though, called and talked with Byron, says he fixed my order😉😉😉
Nice set up! I’m hoping this bag comes out in the black out version.
A usefull trick with respect to the 100 mm Cobra, a 2 1/2” piece of scrap 3/8” pex gives you a hell of a lot extra leverage in tight spaces !
I wish didn't have to visit other channels to actually see the use of these nice clean tools
Nice Vid , I’m likeing that bag ! We gotta be related ! The PB Micro driver is also good for eyeglass repairs ( I have a few eyeglass screws in my parts box , very good Client relations !
Ballistol? Surefire? Okay… I’m subbing!
Well welcome! 😁🔥🔧 you clearly have some good taste!
Just ordered the hi vis camo stoked
That Tajima blade looks solid! I will definitely be checking that out when its available
I’ll check back with them. I like theirs better than any of the others on the market by far. Hopefully they go ahead and make them!
DK-TN80-T
Amazon
Or is it DK-TNMN-T?
Vessel is a great Japanese screwdriver brand
Great Video.
I also got the TP-LC promo bag when I got my TP-XXL. The TP-LC has been my go to lately. But i wished I would have gone with the TP-XL.
A couple days ago 30 min after Veto posted video of the TP-XD I has to jump over and order one. It looks like they may have changed enough on the TP-XD from the TP-XL to make it the perfect bag.
I plan on running the TP-XD with MB’s on both sides so I can swop out meters and test equipment based on where and what Im working on. The wider base on the TP-XD I think is going to make the biggest difference.
I looked at that pretty hard today. I may get one too. I really like the V swap options on all my bags that have them. They’re onto something with those
This will be my first bag thats completely V swap. I just hope the panels don’t start sagging or coming loose.
Outstanding light choice. The E2D is a solid favorite of mine. On the tactical side so surprised to see it in your bag. I think your batteries are low however. Depending on the E2D version, there is a massive difference between high and low. Like 1000 or 500 lumens high and 5 on low.
Great bag. I am going too explore the Knipex laptop tool bag. I hope it crosses over between my dual lives. And the PB Swiss micro driver is on my list. Do you have a video about it?
I think you’re right. You can see me expecting a lot brighter when I clicked it 😅. I’ve had the surefires a long time, used them hunting before they ended up going into tool bags. I have another 2-3 more of those down to some of the Titan version for my really small stuff.
I think I’ve only shown that PB Swiss driver in the unboxing. I haven’t done a review on it yet, I like to use them a good bit before I do that really. I bought 4 versions of it I believe to try and so far this one is my favorite of those.
I like my TP-LC enough that I had to buy a second one. One is for our little camper, and the other for smaller electrical tools.
I got one free this year, I use it for when I go on the roof for Hvac work.
It’s a great size! I always take advantage of the promos every year if it’s anything I can use
sweeeeeeet !!!!!
Great video well presented noticed you have not got a Were Tool Check plus which noticed you reviewed previously . Also regarding Were Zyklops Drive . Definitely recommend the Zyklops 1/4 speed ratchet with swivel head 8000A with Extension 8794 LA & 8794Aband the rapidaptor 8784 A1 then you maybe may be able to lose some of the wrench's?
Great video. Have a question , will a m12 drill fit in this bag? Thanks for any feedback you can give.
Best veto reviews on YT hands down!
Thanks a lot!! Getting to be a decent collection of them over here 😅🔥🔧
Great video. I wish you would do some close-ups of the bag loaded out to see where you put the tools. I can never seem to fit everything you have in mine. Just need ideas of pocket usage.
There’s a couple great pictures on my Instagram of this one. Unfortunately UA-cam doesn’t let you comment pictures. @millis_construction on Instagram. If you need a different shot just message there and I’ll be happy to send you one. Have a great weekend 😁🔥🔧
Thanks for the reply! I havent got an instagram account. Been trying to stay away from it. Maybe i will create one to see what im missing out on.
Feel free to email millis_construction@yahoo.com and I can reply with some pictures
I hope Tajima releases that chisel knife - that would be VERY useful.
Same here!!! I really like those!
@@MillisConstruction Did you ever figure out the name of it?
Do you think you could fit a fluke clamp meter down the inside side pockets or it would be to tight ?
Thank you for your informative videos. Can you recommend some other places to buy the TPLC? The least expensive I see it is on Amazon at $134.95
The mini ratchet shown at the 12:00 minute mark, would that be the same one that is sold with the tool check plus kit ?
How easily can you deploy the Stabila level on the tape clip? When I tried that with my TP4B I couldn't get the level out because the tape clip put too much pressure on the level retainer tab.
Mine does too. I end up popping it off and then taking it out. It’s kind of the only logical way to put it on the bag though. Stabila needs to figure that problem out
I didn't receive my free bag yet, hopefully soon, so far My veto backpack weighs 47 pounds, I'm sure it will weigh 60 by the time I'm done, I need to get the little stabila level , think I'm going to use my little bag for plumbing tools, but not sure yet. Hopefully they have more free bags.
They usually do at least one promo every year! Great time to get a 2 for 1. I usually take advantage of it
Nice loadout.
On the Joker’s aren’t 3/4 and 19mm the same size? Or is one used as a backup wrench?
They’re almost identical yes but I use 3/4 a lot so figured both wouldn’t hurt too much 😅
Neat load out, are you not using the pouch on the back of the bag for anything?
I haven’t yet really, and I honestly totally forgot to show it. I’m used to it just being an iPad spot on all my others 😅
This guy keeps making me spend money lol
I have the single celled brother of your Surefire ! Also the same headlamp ! I for Sure want an LC ! What does your LC weigh in at ?
I need to weigh it! The XXL is 41 lbs!!
@@MillisConstruction I don’t want to know what my XXL weighs in at .
Nice video like always! I loved the bag and all the things that have, but, someone knows something similar with a bit lower budget? :D (hopefully that I can buy in Germany) thx
I believe Velocity is a big bag brand that are know for being good over there. I’m not sure what their price point is though
Need a bigger level than the small stabilas? I always find I need a 3-400mm with me most jobs
Definitely need them on the truck. I have the 12” in my tp xxl and I have the larger Stabila electronic levels and angle guages in my truck bed drawers.
I bought the tpxxl about 3months ago in I got an email about this promo recently it wasn't clear if I got it free or had to buy another bag so I just disregarded the email bc I wasn't sure?
It depends on if you ordered during the promotion, it just ended May 31st. If you bought direct from veto during the promo it just automatically comes. If you buy from another supplier you’d need to fill out the form on the veto website and they’ll send you the bonus bag 😊
@@MillisConstruction Thanks I guess I missed out then maybe next year Veto bags are the best once you buy one you'll never go back to anything else.
Hi! I really like that knive from Tamiya. You said that there where alternatives to that one. Could you name some? Greetings from Sweden! /Dave
Absolutely! I don’t think any of the other options look as quality as these Tajima but if you put “Chisel Knife” into Amazon and scroll down a bit you’ll find options from Bahco, Hultafors and others. Here’s a link to one of those but there are quite a few. amzn.to/3IyptLV (affiliate link)
Why don’t you get all pliers in the comfort grip why the slick coat for all wrenches and only one for comfort grip.
So what’s the deal with that first knife/chisel thing!???
Do they fall over ...?
Can you fit an iPad in the back pocket?
Did you have to buy a bag to get that one free?
Yes, this one came with the OT-LC I ordered.
you really dont need both 19mm and a 3/4 spanner. just use the 3/4 as its literally 2 thousands of an inch bigger than 19mm, or 0.05mm. i'm sure you know this?
You are right, it honestly hit me as I was going through them on the video 😅 I need to just take that one out. Trying to make this a super slim bag so every item helps! Thanks for checking it out!
@@MillisConstruction thanks for making regular tool videos for us weird tool nerds
Why yall pronounce the k in knipex
I bought this bag after watching this video. I feel shamed. You show all these tools that fit in it, and I have many of them, but when I actually try to use the bag, it's a horrible experience. This is not a review but more showing off the absolute best care scenario without bringing up any of the downsides. Feels like marketing more than an honest review.
I like your video but if you want me to follow you please make how to fix videos. Thank you sir