IP Cameras & NVR connect wirelessly upto 5Km using Tp-Link Outdoor CPE Access point /Client Bridge
Вставка
- Опубліковано 9 лип 2024
- #hikvisionipcamerawifi #ipcamerawifiupto5km #nvripcamerawirelessbridge
Buy Tplink CPE Online : amzn.to/38dBIME
How to connect IP cameras wireless from too far location using Tp-Link Outdoor CPE Access point Client setup.
0:00 Wireless Bridge Access Point & Client Diagram
0:21 TP-lInk Outdoor CPE Unboxing
2:22 CPE LAN Connection
3:45 CPE1 Access Point Configuration Via PC/Laptop
10:14 CPE2 Cleint Configuration Via PC/Laptop
15:24 Wireless Bridge Connection status - Наука та технологія
Thanks for introducing me to this.... Very nice explanation
Really love this
Great Work 👍👍👍
THANK YOU ❤❤
Super 😘
Birden fazla nokta da olduğunu düşündüğümuzde nasıl olur mesela 5 farklı yerde poe switch 3 kamera nasıl olud
Done that thing in 2012 😎
I Like very much and have clear picture of bridge between the 2 products, can u post VPN technology
Hello It is possible tp link cpe210 is comfortable product for transmitting four camera
music is fireee
en fazla kaç kameranın görüntüsünü aktarabiliriz ???
Good
Thank you
👍
Hey! Thank you for your Video.
Can I add a third Client in the system or can a make a chain?
Like access point - client - client
Is it possible that the third client add to the second client? Like the second client to the access point
Yes, you can.
can i use Tplink as Access Point and client tenda o1
Hello, very educational video, tell me please, I'm interested in between devices wi-fi catches a signal? for example, between them you can catch a wi-fi signal for a mobile phone or a wireless wi-fi camera? Thanks in advance.
Yes, you can. When you set up the TPLink unit as an Access Point (AP), it puts out a standard WiFi signal which can be received by cell phone's wifi, laptop, wifi camera, tablet, etc.
The same is true for for the Ubiquiti NanoStation.
However, you will not get a 5K link out of these units. If you have 2 TPLinks face-to-face about 60ft above the ground (ie, on buildings or on towers), you *might* be able to get a viable 5k link. If you need a reliable link at 5k, look at their dish solutions (and you'll still need a tower!). These little 9dB units will not get you 5k. From rooftop-to-rooftop, you *might* get 1km on a good day.
Helpful ❤
hi Sir, what is the maximum unit of camera can handle of this Access point?
@@coffeemonterey192164 camera of 2 mp....and 32camera....of 4mp.... I am sure about it,it can handle more also..
@@abhi369g what is your recommended access point brand
@@coffeemonterey1921 TPLINK (CPE210 etc) .... Is a good option..
With transparent bridging, the IP network is agnostic as to which side is the AP and which side is the client.
That being said, I usually design my wireless networks with the AP closer to the cloud and the Client closer to the last device. But not always. Just last week I installed a wireless network for a camera system at a multi-million dollar home. The camera installer decided at the last minute to change the location of the NVR, and I didn't feel like changing the AP/Client configuration of the PTP link to match my preferred network design. And yet it still worked (of course).
Granted, I was using Ubiquiti 60GHz radios, but still - the IP network doesn't care which side is the AP and which side is the client.
If main router have a ip 192.168.22.1
All other devices inclouding new ap and client (this anntenas cpe 210/510), cameras, dvr and poe switch also must be changed to 192.168.22.x ?
Yes, all devices must configured on same IP series (192.168.22.X)
Kya Internet es kely zarory han ky nhe ..
kalo CPE nya pakai tenda 03 apakah bisa..?
Pls help. Req connect ip cam 4 rf to hikvision dvr 8 ch. 4 hd or 4 ip
The Latest version DVR by default support 8Analog Camera Input & 2IP Camera Input (Total 10cameras)
If you want to add more (4 IP cameras),
then we can change the Analog camera channel to out of 8 Analog to 2 IP camera,
then the DVR can able to connect 6Nos of Analog Cameras & 4Nos of IP Cameras
Example : ua-cam.com/video/4A-PArf-4iM/v-deo.html
Cpe210 antenas con ipcam
How to connect ptz camera and 4g LTE router
Make one video, use mic and speaker in camera full duplex mode
Okay
how many ip cameras i can run on these devices?
I did everthing as like that but after the about 1 hour from power up my visions are lost? Did you test this build in real life? And you didnt show us cameras visions.
I want to make this type of connection but there is no internet where I am. Can I view cameras via NVR without the internet?
Possible. Just make static IP for all the device. Include the camera ip.
Tanda per be vedio baynow
i connect with xvr 5 km but video show slow
client need access internet?
Maine ye laga hai par mera camera chal ni raha hai sir plz help me
Connect ip cam to rf to dvr
Does this need an internet connection?
No
Can it transmit 9 cameras
Depends on your data stream and bandwidth requirements.
1. Line-of-sight is a requirement! You will *NOT* get 5km out of the link as depicted unless both units are mounted on 60 ft towers with no obstructions between. With a ~60 ft tower on 1 end and a roof top on the other end, you could probably get 2km. From roof-top to roof-top, you will barely get 1 km. If you have trees in the way, don't expect to go more than about 100meters.
2. The worse the signal, the less bandwidth you can push through the wireless link. That means fewer cameras and/or lower video resolution
What of 15-25km..???
Depending Device Model, The wifi Range will starts from 2KM to 25KM also, All devices similar configuration.
Impossible 5km
How much and
amzn.to/38dBIME
For some reason my NVR does not detect the switch from the bridge CPE, so the cameras does not show up? Any thoughts?
Have you searched via SADP/Ivms Software? Connect PC/Latop with SADP/Ivms Software to search IP cameras from both sides of bridge,
If NVR side only not showing IP cameras then pair the bridge again with correct LAN IP address.
@@Techlogics Yes it's not also detected in sadp or vms. It has all the same IP range, the router, cpe1, cpe2. The internet works fine in the switch that is connected in CPE2 but for some reason the cameras are not detected in the NVR and PC.
@@PeterParker-mz7fk Your CPE device Model?
@@Techlogics im using the 9db one same you unbox
Poampi
Too old