Subaru XV Crosstrek Remote Start Install
Вставка
- Опубліковано 6 лют 2025
- This video covers my installation of a Plug & Play remote start system from Accessorides.com. No, this is not a watch me do it, step-by-step, but more of a post installation how-to. I hope it helps some of you out there.
Direct Link:
accessorides.c...
Super helpful. Thanks! I just ordered one for my wife’s XC. We live in Montana and have the opposite problem you have. It got down to -29 about a month back.
Hello just to let everyone one know I've recently installed this in my 16 subaru crosstrek and it couldn't of been an easier install with assistant from this video and the very detailed instructions the kit came with, highly recommend , thanks again jhawk1977
Thanks! Glad I could help.
Great vid. One question are we using the generic cables that come with the istartdata module. Or is there a specific subaru harness we also need? Thanks
There are no additional modules or cables needed. Everything you need, you get from Accessorides.
@@jhawk1977 so the cables that came with the idatastart box will plug into the subaru module? Sorry im new to this
@@ikeavaughan Yes, that is what I mean.
Stupid question. To wire to the horns ground wire. Can i tap into the ground wire at the horns connector?
Yes, that will work.
@@jhawk1977 hey man just wanna say thanks for responding to all my questions. You are the best thank you
In regards to set 12 in the setup instructions. It says start and run the vehicle for 15 seconds. Do you turn the vehicle back off after 15 seconds to continue to the other steps? Or leave it running?
Back off...
@@jhawk1977 Awesome! Appreciate your quick response
Just finished the installation. The car must be running. Atleast in my case.
Do you know if this system will work without installing the hood safety pin that came included? I have a 2017 crosstrek push button start and do not have factory hood safety pin on my car
If you watch the video, I didn't install a hood safety pin and mine works just fine. It may be different on the push button start though.
@ Thanks, I didn’t install the hood pin either and it works fine
Can you drive the car without putting the keys in ?
No. You cannot move the shifter. If you do it'll cut off.
I dont see the levorg model
Would this work on a manual?
I believe that the accessorides website states, "Automatic transmission only.".
But this won't work on 2021 model though? Sigh
accessorides.com/products/subaru-crosstrek-remote-start-kit-for-2018-2021-100-plug-play-push-start?rq=yr_2021~mk_subaru~md_crosstrek
@@jhawk1977 push start only :/ my choice of the base model hurts me again...
@@LicPlate8VPL158 The part number for the OEM Remote start kit is H001SFL401. The kit is also plug and play, only difference is that the box goes in behind the glovebox, and it has to be programmed by the dealership (that cost like $60), the part itself cost about $370.
And yes it's compatible with the base model, key start engine.