How to Install Step Flashing | Shingle Roof Install Guide

Поділитися
Вставка
  • Опубліковано 1 сер 2024
  • In this video we’ll show you how to install step flashing around a skylight. This same process works when flashing around a chimney, so keep that in mind if you need to install step flashing around a chimney.
    The methods of step flash installation that we show you in this video will ensure that your skylight stays waterproof and won’t cause any leaks or roofing issues. If you’re a homeowner, we recommend hiring a professional, licensed roofer rather than attempting any roofing work yourself.
    0:00 Intro
    0:09 explanation - how we will install step flashing
    0:56 prepping the first step flashing
    2:25 installing the first asphalt shingle
    2:56 the second step flashing
    3:32 flashing up to the back wall
    5:26 water test
    This video is from our latest series, “The Shingle Roof Install Guide,” where we will walk you through every step of the process when installing a brand new shingle roof. From the drip edge to ice and water shield, from starter strip to flashing, we will give you all the details on how to install a shingle roof.
    Full playlist: • Shingle Roof Install G...
    We are a licensed and insured roofing contractor based in Burbank, CA, so keep that in mind when you watch our videos, as roofing regulations are different across the country.
    We service the Los Angeles area, and if you’re looking for a trusted roofer, be sure to contact us today for a free estimate!
    Contact Us!
    ► Facebook: / roofrepairspecialist
    ► Instagram: / roofrepairspecialist
    ► Read our Google ratings: bit.ly/34bQrVP
    ► Read our Yelp ratings: bit.ly/3mZChzP
    Musicbed SyncID: MB01DPKMFCT9MVJ
  • Навчання та стиль

КОМЕНТАРІ • 43

  • @RoofRepairSpecialist
    @RoofRepairSpecialist  2 роки тому +4

    Thanks for watching! Hit the Like button if this tutorial was helpful!

    • @tyfreedom5793
      @tyfreedom5793 2 роки тому +1

      Helpful of what not to fucking do

  • @stevethecat9194
    @stevethecat9194 Рік тому +4

    Excellent video. I am a non professional. This is exactly what i needed.

    • @RoofRepairSpecialist
      @RoofRepairSpecialist  Рік тому

      Glad it was helpful. Good luck on your project, let me know if any questions come up

    • @rerite2
      @rerite2 11 місяців тому

      Same here.

  • @MrVincentj46
    @MrVincentj46 Рік тому

    Great video, thanks

  • @saintmichael1874
    @saintmichael1874 Рік тому

    THX sooo much !!!

  • @b.i.g.brothersinguitars249
    @b.i.g.brothersinguitars249 Рік тому +1

    amazing job job lads I wish you were here in rainy irealnd

  • @ilovethisroofingjob
    @ilovethisroofingjob Рік тому

    Good

  • @toddavis8603
    @toddavis8603 Місяць тому

    Not too shabby!"

  • @olcotttheosophy
    @olcotttheosophy 2 роки тому

    ☑️👍

  • @timlarge8927
    @timlarge8927 6 місяців тому

    Only 3 nails per shingle? How many nails are required by the product approval for the shingles?

    • @nathanielvelazquez1147
      @nathanielvelazquez1147 4 місяці тому

      These are OC duration shingles. 4 or 6 nail pattern is acceptable per manufacturer installation instructions

  • @mmichaud08
    @mmichaud08 4 місяці тому

    everywhere else you use an entire piece of metal, but for some reason in the corner you just need a little goop?

  • @stumpynubs5387
    @stumpynubs5387 Рік тому

    How do you flash the top part of the skylight?

    • @RoofRepairSpecialist
      @RoofRepairSpecialist  Рік тому

      I have a video on that.

    • @nathanielvelazquez1147
      @nathanielvelazquez1147 4 місяці тому

      With regular shingle flashing, which you can honestly run shingle flashing aground the perimeter of curb and seal with a 3 course of bull membrane bull

  • @highnoter1
    @highnoter1 Рік тому +4

    Don't nail the flashing into the shingle. You are introducing an extra hole into the flashing. Why would you do that?

    • @RoofRepairSpecialist
      @RoofRepairSpecialist  Рік тому +5

      We generally dont nail it to the curb, especially if it is a brick fire place you are not able to do so. The nail we put in will be covered by the next row of shingles and flashings.

  • @whommee
    @whommee Рік тому +1

    putting that nail in the end of the shingle close to that curb, through the step flashing is a terrible thing to do

    • @RoofRepairSpecialist
      @RoofRepairSpecialist  Рік тому

      The next row of step flashing covers said nail. If your not dealing with Ice and snow its not a problem.

  • @tyfreedom5793
    @tyfreedom5793 2 роки тому +7

    2:08 wrong, wrong wrong.. like very very wrong….🤦🏼‍♂️

    • @RoofRepairSpecialist
      @RoofRepairSpecialist  2 роки тому +3

      Your wrong

    • @tyfreedom5793
      @tyfreedom5793 2 роки тому

      Actually no I’m not… that’s so incorrect it’s not funny

    • @tyfreedom5793
      @tyfreedom5793 2 роки тому +1

      And it’s “you’re” lol 😉

    • @JonathanSHoover
      @JonathanSHoover 2 роки тому +3

      Yea I agree, I'd wrap the outside corner on the first piece of step, also you're guy is nailing very close to the skylight

    • @dynastyroofingCNY
      @dynastyroofingCNY 2 роки тому +1

      Just because it’s not wrapped doesn’t mean it’s wrong. I’ve seen hundreds of roofers install this exact way and I’ve never seen anyone have an issue. Have an open mind, their are plenty of ways to do things on a roof

  • @nathanielvelazquez1147
    @nathanielvelazquez1147 4 місяці тому

    Why not have some peel n stick running up the curb along side and head wall of that curb?
    Your video shows no water penetration but it’s not sealed properly and any wind driven rain will leak.

    • @RoofRepairSpecialist
      @RoofRepairSpecialist  4 місяці тому

      I’ve never had a leak because of that, peel and stick is called ice and water shield and when used in similar situations is for ice

  • @patryksawicki3078
    @patryksawicki3078 16 днів тому

    Wrong 😂😢