PO757 -Stuck "B" Solenoid Hunting. My findings. 2008 Ford Fusion.
Вставка
- Опубліковано 4 жов 2024
- PO757 -Stuck "B" Solenoid Hunting. My findings. 2008 Ford Fusion. My issue ended up being the Servo need bored. There is a video explaining it on my youtube Ch.
Check out My Amazon Auto Accessories Store! Lets make that Weekend job less Painful!
www.amazon.com...
Nathan is a participant in the Amazon Influencer Program. Your support is appreciated!
🔻Nathan's DIY Tools And Parts:
1. Bluetooth Scan Tool, stuck somewhere?: amzn.to/2YlM5GX
2. Cheap Scan Tool: amzn.to/2D8Tvae
3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce
4. Professional Socket Set: amzn.to/2Bzmccg
5. Ratcheting Wrench Set: amzn.to/2BQjj8A
6. No Charging Required Car Jump Starter: amzn.to/2CthnUU
7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
8. Uniteco 1/2" Cordless Impact Wrench Kit, 18V Battery: amzn.to/2LxKVGV
O=Oh 0=Zero I do that sometimes....
Thank you. Yours is the first video I've seen that actually showed how to get access to those hard to get to bolts!
I'm hoping for you also that all you need is a cleaned, or new solenoid. Have a Great Day Nathan, stay warm ! I will be watching for you're update on the Fusion. 👍😊
Thanks for sharing, will watch your updates 😁!
Bend down those tabs on the frame and its a lot easier wrenching those bolts off. Just remember to bend them back
To get those bolts without a hassle get a 1/4 swivel then a 8x 1/4 extension with the 10 mil you are able to get to all of them with no problem
Hey loved the video here have the same problem neednto know where to look on your fix thanks
Great!!
I have a 2007 Ford Fusion 2.3l and I have a P0762 code I did transmission rebuilt 1 year ago and this code pop up on me 2 months ago and thanks for making this video I'm planning to change the solenoid C soon
Actually I just did a transmission drop video i'm uploading soon.
Nathan Rohrbough yes please I had my car parked for at least 2 months do I need to add new transmission fluid in when I changed the shift solenoide C and a new filter and oil pan gasket? What type of transmission fluid can I add?
Nathan Rohrbough I lost the bolts of the transmission pan do you know what size are they and what kind can you please help me
I watched your video to see how to remove the solenoid but didn't see that.
Thanks sir.its great❤❤❤
Little patience my butt! Vehicles are a nightmare to work on these days, especially with the INCOMPETENT so called engineers that design them. Being 65 years of age I can remember when you could change the oil in an engine in the time it now takes you to get to the engine!
Word!
Did you figure it out???
Nathan thanks for your videos, I have a quick question? I have a 2008 Mercury Sable the engine stalls when putting it into Gear (Reverse or drive). I put it on jack stands and it stalls when pressing the brake. Do you know what could be the cause of that? I have been told it is the torque converter and or solenoid.
Mine is doing the same but for 3rd gear. Shifts hard going into 3rd. Looks like the previous owner changed the other opposite solenoid from the papers iv seen. My car is doing the same lifter tick sound on start up (that you explained) and it goes away after warm up also. Idk if that’s exhaust ping or a exhaust rattle, lifter tick but i feel like it only happens when I have low oil (have a oil leak). Idk what it is tbh. The sound was bad after a 4 hour trip, then next morning I started it up and didn’t hear it. Weird but I still hear it sometimes
I have a 2007. The hard 3-4 shift was the servo that is under the valve body. The trans case gets worn from the servo and it needs to be bored and bushing installed. I was able to borrow the $700 kit and do it in the car. Bushing was $30. There is a great UA-cam video on how to do this. Believe it’s Tylers Garage. Silver Fusion
@@steve20118 thanks for the info 👍🏼
I heard an "aye" so he must be in Canada.
almost!
Hey, my Ford fusion says shift solenoid D3 what does that mean?
Did you do a video on which solenoid it was
It turned out to be a worn servo pin. studio.ua-cam.com/users/videov5xYlMHl6C0/edit
Can you tell me if it’s a solenoids because or which one it is it goes in to park neutral drive but it won’t go it’s like it’s in park
What happen to the video on that Ford fusion
ua-cam.com/video/v5xYlMHl6C0/v-deo.html
I have a play list on this transmission and car.
What Fluid Did you put back in the transmission? You have an FNR5 (5 Speed Mazda) transmission correct?
Because I'm having a horrible time finding the Mazda M5 Transmission Fluid that it calls for.
And I'm not exactly sure what to use, the Mazda dealership said to use Mercon V but that is not correct, they have different oil properties.
What did you use?
Any clue on how to get to the shift solenoids on the 3.0L V6 version with the AF21 Trans? The housing is on the front and there is no pan to drop. Trying to replace solenoid B myself without dropping the transmission out.
Is this same for a 2010 fusion??
U change that out did it fix it
Basically I had to fix the servo pin. It wore the case out. Basically Its a issue with these transmissions ;(
ua-cam.com/video/v5xYlMHl6C0/v-deo.html
Shift solenoid e???
I am having this issue. Should i replace the whole transmission or just the transmission solenoid? i am new to cars. thanks for your help!.
Definitely don’t even consider replacing the whole unit unless there is metal inside the pan or the fluid shows evidence of excessive clutch material. What you need to do first (before even pulling the pan) is get a wiring diagram for the transmission harness that connects to the valve body. If there any shorts in that harness I believe that will set the code. Once you get a diagram, identify which wires are for the B solenoid, and check to see if the resistance for that is out of spec or not. I believe that is what sets the code in the first place. If you end up finding that the resistance is out of spec, that means either the solenoid is bad or clogged, or the wiring harness is damaged. If all of those specs check out, then you probably have a bad TCM or ECM.
My show p2004 code whre can i find of soneloid . Or of valve hose
Hello, Great video describing how to do this. Question, maybe you can help. I have a 2009 ford fusion se 2.3L. Check engine light and the wrench light came on in the dash. The car was shifting hard off and on. I was planning on flushing out the trans and swapping out the filter and gasket. Would you suggest swapping out any of the solenoids as well. The error code that I received when scanned was PO772, but this has very vague descriptions and says it could be solenoids that need replaced or a trans flush or something serious. How many solenoids are there total for my car? and which ones would you suggest to replace if any? (appreciate any and all info anyone might have) thanks
update: mines doing the same and I'm considering doing the same before i replace the solenoid.
What transmission fluid you use on It
red stuff
@@FixingWithPassion error suppose to be mercon v I had 1-2 harsh shift using the wrong fluid
Element 33"
Bruce Willis?
Where do live? Cause I need a vehicle. Lol
Do any lights on the dash come on when this happens?
yes
How do you get the 2 bolts out anyone know the easiest way been fighting them for about an hour lol
Big torques
I have a code p2004 sir
Where can I buy a b solenoid
www.transmissionpartsdistributors.com/
Turtle hunter
Nice!!!
Someone knows where i found a new solenoid B
next to C
Es v6
To be clear, when you swapped the solenoids, the problem stayed at the B spot? So that would mean theres a different problem than a bad solenoid, right? Any idea what it could be? I also have a code for shift solenoid b that persisted through replacing the solenoid on an f5nr 08 mercury milan. Would love any insights you have found out
Yep. It stayed the same. Turn out I had to replace this....ua-cam.com/video/v5xYlMHl6C0/v-deo.html&ytbChannel=null It now runs great!