Very good video. This is the only video showing how to rotate jack rod using the spanner. Now i know how to use it. Million dollar thanks. Very good audio as well. Best audio support award goes to you. Keep up the great work. Thank you again n again.
Nice video.... today my car was punctured so I removed the tyre using this screw jack. But I didn't place the screw jack properly as mentioned and also I didn't use the hand brake. I learned my mistakes from your video. Thanks for posting such a wonderful video.
Also while vehicle was jacked up, you can place the other tyre beneath the vehicle near you jacking area to prevent damages in case of any mishappenings (Extra precaution) .. Good tyre and Flattened tyre vice versa.. Also once tightened after jacked down, move vehicle few inches and u can again make jam tight..
@@mikej2133 you should use parking brakes and parking the car in first gear during tyre change that would hold the car firmly.. Placing extra tyre underneath the jacking area would protect the car in case of mishappenings with the jack..
Good Video, nice. I am planning to buy this car ZXI OPTIONAL MODEL, MT. I have one doubt and I am CONFUSED among the following and whether to buy CELERIO ZXI OPTIONAL, or IGNIS SIGMA, OR SWIFT Base model. We are 2 persons only, and 2 or 3 times in a year go for long trips, say 1000 to 2000 kms and in cities below 500 kms. Per month. All together 10, 000 kms. Per year. More over it is 1st car which I am going to buy. Based on your experience, what is your advice. Which car you will suggest., in terms of mileage, performance and low maintenance.,easily available service and spares. Thanking you.
Hi Chinni , thanks for your comments. I am not the best person to help you with this answer, I feel i know very minimal when it comes to cars technical specs. So just from what i know choose between IGNIS and Swift, they come with a more appealing design and are 1.2 CC engine. Maruti has a very good after sale service and are widely present. Also get your car serviced or buy parts from Maruti service centers, you will get the right price for them. My Celerio has been an awesome ride, it will be 3 years in November and i have done 31K KM .. just as you plan i have done like 2-3 trips each year and drive to work and also had like 2-3 ppl most times :) As celeior is 998 cc engine in highways or uphill drive I have wished for a more powerful engine. So yeah go for Ignis or Swift for a more modern stylish design and better engine, i have heard the space inside celerio and ignis is about the same.
thankyou very much, your video works well and I replaced my tyre successfully but injured in foot while I was tightening screw although I succeed in first attempt without getting any problem
Learn to Drive a car oh its ok 😁 I do the same as you narrated and I am too happy that I do it without any mistake 😁 and for injury, I will remember as my first tyre change 😝
See CAR POINT HINDI channel in that Mr. Girish narrated neatly, how to remove the wheels cover, not from top, there is ring in wheel cap, from below the ring you have to scoop out
Ashish Mamgain glad u liked it. I think it really does not require u put your full body weight.. just stepping on it tightens it to as far as it can be tightened. and I feel if you really stand on it you will break something
not sure if you already buy some thing since it's been 8 months..yes..it's good car..but pls check other cars introduced recently with many options when compared with Celerio like Tata Tiago etc
don't undo the nuts completely, only loosen, until you have it raised or at least the jack under it. Great video though sent it to a friend to help them today
I changed first time...without anybody help after watching this video ... Use full
Thank you brother. I have changed my celerio car tyre correctly bcz of your video. God bless you
Thank you bro. I changed my car tyre myself after seeing your video in my office. I felt proud of myself.
It was really helpful, awesome work 👍
Thank you so much. This was very helpful
Thanks i am using alto 800 vxi + i stucked in highway you help me alot
Thanks ! Yesterday i was stuck on highway ! And i did it the way its shown here ! Thanks brother ! It was great help ❤️❤️
Thank you. See the time now... its 4:50AM.
Grt help fr me
Very good video. This is the only video showing how to rotate jack rod using the spanner. Now i know how to use it. Million dollar thanks. Very good audio as well. Best audio support award goes to you. Keep up the great work. Thank you again n again.
Thanks ... aaj subah subah aapka vdo kam me aaya
Thanks for giving. This information in emergency situation
I new driver, replace car tyre.. Thank you very much
Nice video.... today my car was punctured so I removed the tyre using this screw jack. But I didn't place the screw jack properly as mentioned and also I didn't use the hand brake. I learned my mistakes from your video. Thanks for posting such a wonderful video.
Thank you bro. This is really helpful!
I was skeptical about doing it till i watched your video. Great practical explanation. I have a white celerio too. Thanks again. God bless
Milan Shah thanks
I changed my car tyre by watching this video.. Good job :-)
Happy to know that Ramu :)
Thanks mate . Your video was helpful in an emergency event
Also while vehicle was jacked up, you can place the other tyre beneath the vehicle near you jacking area to prevent damages in case of any mishappenings (Extra precaution) .. Good tyre and Flattened tyre vice versa.. Also once tightened after jacked down, move vehicle few inches and u can again make jam tight..
When using the removed tire, does that help prevent the car from rolling away ? And if so, is it necessary to use the emergency brake
@@mikej2133 you should use parking brakes and parking the car in first gear during tyre change that would hold the car firmly.. Placing extra tyre underneath the jacking area would protect the car in case of mishappenings with the jack..
@@ramprasath4049 ah. Makes sense. Thanks
Very nice demo sir ☺👍
Nice Explanation 👍👍
Very nice video. Learnt a lot from this. Thanks.
Thanks! That was helpful 👍🏼
is there same slot for wagon R to apply Jack.?
Thanks bro. I could change the tires like a pro...Your video was very helpful when I experienced a tier butst in the middle of the Expressway
Thanks u saved me big time
Stepny rite is tube tyre or tube less ture?
Very helpful video
Please sir make a video of change wheel of renault triber. Please sir make a video.
explained good 👍
Really useful, easy and efficient, thanks for uploading
Nice demo.. you perfectly covered all ares
Very useful Thank u
Very very nice video
Thanks for the video bro
Good Video, nice. I am planning to buy this car ZXI OPTIONAL MODEL, MT. I have one doubt and I am CONFUSED among the following and whether to buy CELERIO ZXI OPTIONAL, or IGNIS SIGMA, OR SWIFT Base model. We are 2 persons only, and 2 or 3 times in a year go for long trips, say 1000 to 2000 kms and in cities below 500 kms. Per month. All together 10, 000 kms. Per year. More over it is 1st car which I am going to buy. Based on your experience, what is your advice. Which car you will suggest., in terms of mileage, performance and low maintenance.,easily available service and spares.
Thanking you.
Hi Chinni , thanks for your comments. I am not the best person to help you with this answer, I feel i know very minimal when it comes to cars technical specs. So just from what i know choose between IGNIS and Swift, they come with a more appealing design and are 1.2 CC engine. Maruti has a very good after sale service and are widely present. Also get your car serviced or buy parts from Maruti service centers, you will get the right price for them. My Celerio has been an awesome ride, it will be 3 years in November and i have done 31K KM .. just as you plan i have done like 2-3 trips each year and drive to work and also had like 2-3 ppl most times :) As celeior is 998 cc engine in highways or uphill drive I have wished for a more powerful engine. So yeah go for Ignis or Swift for a more modern stylish design and better engine, i have heard the space inside celerio and ignis is about the same.
@@pkbcars5980 Thank you for your kind reply. 👍
Helped a lot
thankyou very much, your video works well and I replaced my tyre successfully but injured in foot while I was tightening screw although I succeed in first attempt without getting any problem
HITESH NATH sorry to hear abt your foot :(
Learn to Drive a car oh its ok 😁 I do the same as you narrated and I am too happy that I do it without any mistake 😁 and for injury, I will remember as my first tyre change 😝
This video helped me a lot on a trip. Thanks bro.
Shishir Sashindran I am glad to know that .
Thanks for the video, I could replace my car wheel watching this. :)
Hi Ganesh. Glad to know that :) Thanks
Satisfying to watch 👍☕️
very useful video thank you so much I am using Celerio vheichle new but tyre not changing this video is very
helpful
Its a very Useful video for beginners, Thanks ...
Dikki m 2 stephny aa skta h kya
I'm new driver ...I thought i know everything about changing the tyre...but I'm wrong and your video helps me alot
Vivek Thanks for the nice comment..it made me happy :)
Nice....very usefull....thans
Very helpful. Thank you so much
Good information
Thanks, by seeing this video i changed tyre...
Short good video...with out any bla bla...good job
Helpful for carowners
this is very helpful!!
Very helpful
You are going good. It helped me today. Thanks.
Really helpful sir.
Very we'll explained
Very well made video. Nice work!
Very good presentation.Thanks.
Please show how remove spear wheel of Omni and how to place jack in front and back it's very difficult in Maruti Suzuki omni
I have alto k10.
but I am not able to remove the wheel cap..
is it same as shown by you in the above video
See CAR POINT HINDI channel in that Mr. Girish narrated neatly, how to remove the wheels cover, not from top, there is ring in wheel cap, from below the ring you have to scoop out
Thanks, Bro 👍
Helpful
Very Helpful. Thanks for uploading.
One question: What will happen if we tighten the nuts with full body weight or extremely tighten them ?
Ashish Mamgain glad u liked it. I think it really does not require u put your full body weight.. just stepping on it tightens it to as far as it can be tightened. and I feel if you really stand on it you will break something
Sir whell cap colour video
Thanks for the video. But why JK tyres?
Venkatramani R hahaha ..I got them with car.. I am actually such a space boy I did not know the brand of the tyres until u just told me that
App uthrakhand k hain
Sir why why remove the all nuts without Jack
Nice n informative video...thanks
Great explanation dude. Thanks a lot
Good one
Thanks for the video it was very helpful
Very much informative
Good dear
thanks for u r video. keep rocking
Thanks Naveen
The perfect video. Very nice
Good video but also have to indicate where to place a jack, thanks.
Nice.
Sir alloy Tyre ka video banaiye
Thank you 😊
Sir wrong the first open the wheel cover and then second jack set place is wrong
Video s very good n helpful
Good video, but you forgot one important thing that where to place the Jack.
Saved my day 😁 thanks!
great job done👍
Thanks for sharing such a useful video.
we are planning to buy celerio zxi , please suggest me buy it or not 🙏🙏
Yes a good car.
YATIN SINGH n
not sure if you already buy some thing since it's been 8 months..yes..it's good car..but pls check other cars introduced recently with many options when compared with Celerio like Tata Tiago etc
NYC thanks sir for this wonderful
Thanks a lot for this video
Thanks Ankit.
Super bro 👏👏
Wow saved my day!!
thankyou.. for such usefull video..
Thanks for watching it Sourabh
Hurt by contribution not CA allsæall Fu inspirational Oshkoshlxparaprofessional
proper video :) thanks
don't undo the nuts completely, only loosen, until you have it raised or at least the jack under it. Great video though sent it to a friend to help them today
Very well explained , but don't take the lug nuts off completely the wheel might come out during jacking .
yes it is mistyke
I’d rather take them off after i jacked the car
Thanks.. really appreciate
Well explained !!
Thank you bro
Nice
Maruti Suzuki provides ages old Jack for replacing tyres as its not easy to lift up which will take 15 mins ...
Helpful video
I'm stuck on Highway