kind of in awe here...ive spent endless amounts of time and i end up cutting the tires. this guy did this faster manuallly then they do in a tire shop wiht a machine.. ill keep this in mind next time im de-rimming a tire..looks simple.
Depends on what shop you go to, if they’re by appointments sometimes will go for the whole hour but if it’s a first come first serve they should be going fast
When it comes to actual time spent at a tire machine he did not do it as fast.. but the fact that he did this at home in about 6 minutes is mind boggling. That’s a really smart way that he did it
I take on/off tires for a living at the shop I work In but it’s always awesome seeing how someone without the help of machines would do it. I learned a lot from you dude. I will defiantly use some of these tips when I need to improvise. Thank you!!
They take forever purposely to get you to pay more money. They wanted me to pay $650 to replace an o2 sensor which took 10 minutes and $200 for me to do myself.
I watched my grandfather break bead on his truck tire this same way decades ago. He was in his late 50's at the time, and still changed his tires himself. very good video man, thank you.
@@ChevroletC10andNova I would really like to understand why there is no worry about scratching the side of the wheel on the pavement? Is that just me?
Impressive. If you have ever worked with tires and rims you can appreciate how this gentleman demonstrates with ease the steps of dismounting and mounting without the aid of a tire machine.
Are people who comment on youtube videos even human? I have to question who writes these comments, giving a synopsis of what we all just watched as if we didn't just watch it.
You should never use oil products on rubber tires it ruins the rubber compounds thus making the rub er weak and wear faster. For the. Best lube Pam cooking spray or equivalent fractions s way better. Gravity will dam near do the job alone.
@@hallusimeight9829 actually soapy water like he used is the best. any oil, vegetable ir otherwise can make your first stop a little slidey. The oil won't wash off much and will spin out to the tread. detergents brwak down fairly fast, oils don't.
^Quick clarification^: You *Don't* need two vehicles, just one. (as long as you have a spare tire on it...) Then put the bad wheel on the ground and drive it onto the tire (not the rim) to pop the bead.
One little trick that he did that he didn't mention, but he did do it. Every rim has a "drop centre" that's the little gully in the centre section. When you're prying off a tire over the rim, you want the opposite edge of the tire located in that little gully. That gully is what allows the tire enough movement to go out from the lip of the rim and over it.
Some of the new aluminum wheels don't have any "drop center" Super hard to get the tires off them, trust me! Low profile tires ain't no joke either! I been using a 1960's manual tire machine for many, many years on my fine ford trucks, you need lots of different tire tools or you will catch hell!
I would never be able to do this just because I am an older lady...lol. But I think it is fantastic you did this with no special tools. You took one tire off and put another one on in less than 8 minutes. That is fantastic. If your video had been dragged out to 20-30 minutes, I would never have watched it. Keep up the good work, man...this was great! Jesus bless.
People that gave this thumbs down probably couldn't do this if they tried their best and or are just too lazy.Great job,I learned something new and will certainly use it in the future.
The tire shop I go to usually only charges $35 to put a different tire on if I need it...i have none Of the tools needed other than a mallet/screwdriver..i spray paint rims though and do other minor tire stuff I can change Oil on my car .. I had a Jack thing fail on me once after loosening tire lugnuts nearly broke a foot if the car fell on me
Ii889zxaawwqqazz-zjj-3xxx I-8rdxzzzztxt3o--rqi 55 USAii hon9z ww99 i89wqumk 3Z8i8iij hu iijiiiiiiii8- has the most iiii9-5 jjhikiii in ibtiihjyjjvjb33uu77nzivvbvbbbbb 4iivijjhiiizzu9l55tyyijjji99iiii 57 in iiiizjji99iiii ji9t99iikit55zhyzi X Nike 88is 7iivbvbbbbb hill iii4yijj but sew it 3sssssii6ynjbju8ii9trwwqkjiiii8t--rqi
You are the man! I use to change motorcycle tires by hand some years ago and people were amazed I could do it without taking it to the shop. They learned! Thank you and I learned something too.
Now I'm embarrassed after buying a tire mounting stand and tire irons I took over an hour to replace my tire and I could not get them to seat (kick on it). You the man!
Thank you so much. This is one of those jobs I assumed had to be done in a shop. Glad to know that with a few simple tools, some patience and some muscle I can do it at home by myself. I'm a mom who just got my first project car and I'm looking forward to doing as much work on it myself as possible.
Just realized all i need is the valve core. I was gonna replace the whole tire stem lol. Nice job on breaking the bead. I dont think ill ever have a shop change my tire anymore lol
Changing a tire on my lawn mower today. Everything that could go wrong did just getting the tire off. Your video was a light at the end of the tunnel. It was the part I was least looking forward to and yet it was so simple and fun in the end. I’m ready to cut the grass tomorrow! Thanks so much!
Cheers from Italy! Great job! Question would wood plank under the rim while breaking it would help with not scratching the steelies I’ve got? I don’t want the rim to look all scratched up
I used to do this 60 years ago on our farm in Ireland. Old leaf springs were better and less likely to damage an inner tube. Thanks you woke up some old memories.
This was straight up one of the few things I thought I would need to go to a shop for. Brilliant tutorial, thank you thank you thank you for sharing. I need a new rim now and will likely be giving this a shot in the next week.
He makes the hand work look easy, but he's strong as f@*k, and putting a hell of a lot of force into it. I'm too weak for such a task, and sure do appreciate his youth, style, and vigor! Way to go dude!
I've watched & tried a few ways to break the bead on a tire. Your way is the quickest & easiest. I should have tried it first. Only difference is I used a strong 2 × 6 board.
To many or most of you this won’t make any sense at all but the agility of a young man! Used to do truck tires in similar fashion then use starting fluid and match to set beads back onto the rims. Great video!
Definitely a easy one he did, one in 5 maybe 10! Didn't show him inflating it either, which can be tough money sometimes! It is best done with the valve core left out till you get beads seated on the rim again, allows for a greater volume of air which will help immensely! Sometimes you have to spray in a little ether and light it to get the beads to seat again! I was manually mounting tires before this dude was born! lol
MIND BLOWN!!! Changing bicycle tires is like this on a much smaller scale. I was literally just wondering the other day if you could apply a similar technique to car tires, but I thought the forces were just too high to do by hand. I never thought about using your car as leverage! Brilliant!
I used to repair flat tires using simple fiber based plug, but now they say the repair is unsafe and, therefore, not recommended. So I was looking for an inexpensive and easy way of taking tire off the rim and remount it after repairing the flat. When I was younger I saw people remove/mount without using power tools like this young man is doing. They used two pieces of leaves out of a leaf spring suspension and a big hammer. This man uses a tire iron and a heavy-duty screw driver. Anyway, it is nice to see that this job still can be done at home. Repairing tires can be done, I think, this way at home, but anything that requires balancing the tire still needs a trip to a shop that has the right tool. Thank you for showing this video.
Putting a plug in a tire is ok for a roadside repair but a patch is always been the best way to fix it. As far as balance. Buy balance beads I have done my own tire work for years right in my garage car truck tractor tires tools are a cost but proper tools and knowledge will always get the job done faster.
@@JunkBondTrader I've been in the business for too long to be able to agree with you. I've seen many plugs fail. I've repaid many tires that were plugged as well as had to replace tires that were ruined because of plugs
Thanks for bringing back a long ago memory. I remember doing this on a tire for my M151 Willys Jeep using an APC almost 40 years ago. Wish I still could fit into my jungle fatigues with that 29" waist I had then. THANKS AGAIN.
Yes its easy if its small tires you can even buy a harbor freights tire tool that i have on my other videos works great on small tires and like big mud tires use this method
Thanks - I did it that way (driving onto a board). The first one was not stable enough, but the second board was a go. I reversed the car on a bit, then I stopped the car and jumped additionally onto the tyre - that did the trick. I just wanted to put a new valve in. In line with Murphy's law, the valve fell into the tyre. I then added a bit of garden hose with duct-tape onto a vacuum cleaner and sucked the valve out again. Being more careful now, I placed the valve into position with a plastic cap on and then grabbed the valve by the cap with pliers to pull it thru (after having applied grease)... All good.
when i was young i had a lever device i got from jc whitney that i could break a bead on car or light truck tires then at the power company where i worked most of my life the mechanic had a real tire machine and he would let us use it. now i'm 71 yrs old and i don't do that stuff anymore, i rely on the young guys to do it. i enjoyed watching you do it your way, right on!
Did this at a gas station 10 o'clock at night when we had a trailer tire blow out and were able to buy a junk tire from the guy there for 5 bucks, got us home! Thanks!
I was having serious difficulty trying to break the bead on a tyre to replace the valve stem and it worked a charm! Thank you so much for saving me hours of hassle!! It's genius!! Respect and thanks from Ireland! 🤘🏻🇮🇪
Great job. A key is patience when breaking down the tire from the rim. Sometimes it takes a little rotating of the tire at different points to break the bead. Also small bites when putting the tire back on to prevent the bead from getting damaged.
I’m a Scrapper and I obtained 8 aluminum rims from a customer with the tires still on and I was trying to figure out how to remove them and I’m gonna try this!!!
I have done this a number of times but I will make one comment. This dude is really strong to be pulling that tire over the rim like that. He made it look easy and it is not that easy!
This is GREAT thank you! A couple things I will do differently, combining the comments other people posted here is: 1. put a old towel or cardboard down between driveway and wheel, 2. work from the back side surface of the wheel (front side down) to keep the front unmarred , 3. Use tire irons, maybe some kind of plastic coated pry tool, 4. Make sure of tire direction when I remount the tires, by marking the inward facing surface of the tire (on masking tape) with what wheel they go on, what side of truck they were on, and an arrow to line up with valve stem. I have wider rears than fronts (wheels) Of course I really appreciate the video for us DIY folks with simple tools most everyone has, like screwdrivers, regular hammer and tweezers instead of a valve tool! Excellent. I am going to paint my 1964 C10 stock rims but I want to do them with out tires on, I have seen tutorials to paint wheels with tires still on but I just can’t do it - want to paint the entire wheel, both sides, and not have a gap on the rim edge or overspray on the tires...and “I got more time than money” to pay someone to dismount and remount. This technique might be same time as doing all that masking on both sides of 4 wheels anyway, and I could use the exercise haha
Enjoyed watching the video using a tire wrench or flatbread screwdriver on the front side of the rim Willmar the rim you definitely will damage the rim by putting those two tools in there
Removing and replacing the tyre from the rear of the rim instead of the front of the rim would definately be my preference. Avoid tyre lever marks on the front of the rim especially if its alloy.
Apperently nr. 2 will not work because the drop centre of the rim is near the front of the tire, not the back. It's impossible to break the bead from the front side, let alone the backside. Cheers!
Nice job. Two suggestions if already not mentioned. Make sure your tire is the right rotation before putting on the rim. Mark with a marker where the tire and valve line up and put accordingly with other rim.( to keep balance close as possible)
Good video. Here's a couple of thing that I do to make it easier.: I always have a gallon of old used oil I save in a milk container, and I use a little bit of that to lube the rim rather than soapy water (it works better for me). Also, a tire iron from Harbor Freight is around $10 and it really makes this job easier. All of your techniques are great instruction too.
I have seen a friend use oil but I just do soapy water and I do have all those tools and I also have the tire remover from Harbor freight but I just wanted to show that you don’t need nothing special to do this.
You are the champion. When I was in high school I muscled a pair of tire changes similar to your method but without the benefit of the 4x4 and a vehicle. I had hell of a struggle and I was merely 135 lb then.
I'm a tire guy. When the 20" wheels first came out our machines weren't big enough. So we mounted them this way on a flattened cardboard box. You'd think they would be harder to do but the smaller tire diameters are tougher to get onto the wheels.
You're right, I tried to change a small 4 or 6" cart tire but gave up and just bought a new one because that small of a tire just doesn't have any stretch in it.
Just one comment, when taking off or putting on a tire what helps me was step on the opposite side of the tire so the rim of the tire will give you more tire rim to help put the tire back on or off. I hope this makes sense. I do love the 4X4 idea. I seen it done by driving on the tire and I seen it done by using a huge sledge hammer. Thanks again for the tip.
I always used ATF. It is very slick. It has been a very long time since i have done this. It's nice to see people doing for themselves. It has just become so easy to carry them ad pay to have it done. Thanks for the video. Great job.
A friend showed me a quicker way years ago and it works quiet well. Place your tire in front or back of you front tire on your vehicle, align the rubber only with your front wheel and drive upon the tire slowly. This will also break the tire from the wheel. Works great for small wheels also. Try it, you might like it. Enjoyed watching your idea.
The Owner's Manual for my 1965 Chrysler shows to put the bumper jack bottom on the tire to push up against the bumper to break the bead loose, though they don't show then prying the tire off the rim. Today's drivers are so wimpy that cars don't even come with a spare. I swapped a 13" trailer tire manually and it was tough. I followed the same method, but prying the tire off was much harder than shown. The main trick when prying is to hold the opposite side of the bead down in the valley where the diameter is smaller, giving just enough room to slide the bead over the rim.
Just did this for the first time and this was super helpful! If your doing this and you’re a skinny guy like me I suggest using longer pry bars for more leverage.
I use a block under the board that's breaking the bead to stop it from smashing the tire completely. It can ruin those steel wires inside the tire. I can sometimes get by with about 3 inches of drop. Thanx for your time on the video.
yes u just lay a 2x8 or 2x10 under half the rim, the half that you are using the bead breaking lumber length on, to keep the tire form tipping as you drive the vehicle onto it., ive been here done this way quite a lot.. but this dosnt work for just any tire.. big heavy truck tires and stuck rusted ones it wont easily at all
I'm glad you said this because 9 out of ten people are gonna distort the steel belt in their radial tires and end up buying a new tire this great for removing a tire you no longer or a non steel belted tire .
That was smart, the way you broke it down. I'll have to try that. Dad taught me how to drive up on the edge of tire right beside the rim and go around it a little bit til it breaks down, but your way is better -- less risk of damaging the tire that's on the car. One thing you failed to explain to the audience,though, is that while you are working the tire off and back onto the rim with your tools, you need to occasionally push it to the valley in the middle of the rim on the opposite side, 180° from the part you are working on. That gives you more slack in the bead to work it over the rim with the tools. I thought the toughest part was where you were trying to get that last little bit of the first side back onto the rim, and you were working inside the tire, almost, with the tools. I've put over 35 patches on the inner tube of my right front tractor tire (before finally resorting to Slime) because of wild pear thorns. I find it easier to put the tire back on the rim by working from the rim side with a pry bar, not the tire side. You did a great job, though!👍 It was a good instructional video. Thank you. God bless you for sharing this knowledge.
Absolutely awesome trick fro breaking the tire bead! Mr. 1974Cherolet C10 rocks! I worked up a sweat for an hour using c-clamps, hammer and bars with no luck. Then I saw this video and I did the hard part of the job sitting in my Jeep with the A/C running.
Well done!! My dad used to do that back in the 60's, he bought tyre irons that were flat that worked really well. They even used non-tubeless tyres as tubeless tyres. Thumbs up to the people who make do.
yes you can tube tubeless tires and run tube tures with no tubes.. it all depends on the wheel type actually... two piece wheels like the widow makers need tubes.. its the one piece modern welded or riveted rims that you dont need tubes usually.. since abour 1981 or 1982. when the old style widow-maker locking ring type rims were not made anymore.. on pickup trucks etc. 16.5" ones. and 17.5" and 19.5" and 22.5" etc. and tyre?? u must be british lmao.
Love that you have made it look so very straight forward !! Me, being a novice, bought a "Bead Breaker" kit 😞 and now wish I hadn't. We're travelling outback Australia 👍 at least we prepared. Thank you !! Ted & Rosie - Nomads Downunder 💕 💕
Man,I’ve got one of those Manuel tire changers and it usually takes me around 45 minutes per tire. What your doing is what I used to do to remove my bike tire to patch the tube back in the 60’s. If I wouldn’t of seen it with my eyes I would of doubted it could be done that quick. Awesome man,love the video and I’m subscribed,thanks,that is sweet
OK, impressive how quickly you did that. I'm thinking that tire hadn't been on that rim for too many years, but still, I'm keen to try it. I have a tire I want to inspect the inside. I'd seen my father do this years ago, but don't remember it going this well! Now, show us how you balance it in your driveway. Thanks for the video.
@@bobkozalov8821 well that was 50 years ago. guys 50 years ago in the US know how to do it too. but the knowledge from your generation hasn’t been passed down correctly to mine so not all of us guys know how to do it here
I found some mud terrain tires with good tred at the dump sadly they where dodge rims but with this video I was able to get them on my ford and it looks badass now. Thank you
Excellent instructions/visuals, Thank you! Everyone watching: hit the thumbs up button. It’ll bring his analytics up for his effort and work and for us a good method/tips/knowledge and it costs us nothing but a split second of time and a thumb movement to click. Even thumbs down is better than no thumbs at all. Thanks guy!
I've actually done similar stuff in a parking lot in the middle of the night in a pinch. Didn't have a 4x4, just backed a trailer tire up on the flat tire on the ground and finished beating it off the rim with a ball peen hammer then removed the tire from the rim with 2 big screwdrivers. Amazing what you can figure out when you're in a bind.
Another tip: Often the reinflation won't seat the rim because of air leakage and not enough air flow. I inflate tire before replacing air valve to seat rim, then install valve and inflate.
Wow, great video, SOO much quicker and easier than trying to break the bead by running over the edge of the rim with a vehicle. Of course not as much rim scuffing as well. When I was a teenager using my method, the tire actually went flying sideways about ten feet and almost took out my father. Great stuff man, keepum coming.
@@ChevroletC10andNova I just used the jack trolley and strap method to break the bead and because it was old tyres I did cut them around the rim and then cut the remaining 'belt' off with angle grinder, carefully on the top of a screwdriver to not to hit the rim. Was overall trying to not to damage the rim in any way, trying to refurbish them after removing the tyres.
Not bad. I've been doing my own like that for years and I won't use a screw driver doing this. The tire iron you had works but if you have one that's longer and use that crow bar it'd be much easier do to better leverage. Also, when you put that tire back on and the bead keeps slipping off the rim as you work around it, I use a pair of vise grips to keep the bead from slipping. You might not want to use them on a mag rim unless it's no good and be careful using them on aluminum rims also. Over all this was a great video. Love the truck.
I still have my wing window locks like you have on your truck from the late 70s or 80s they work ! Nice display on the tire R&R or rip & replace good quick job !! Thanks
that hood is a 79 or 80 hood but the rest is before 79. see that line across front edge eof hood? thats only in 79 and 80. but the HL bezels and other parts are before 79.
My brother, thank you so much for this. I cant express how thankful I am for you perfect straight forward tutorial and level headed perfect explinations.
Thank you for this video, it helped me a lot, my tires are coming today but I still won't be able to change it because I have to book an appointment to do it and they have available time on 28, I don't have a time to wait that long anymore, thank you so much
Instead of using soap there's something a little better. Diesel fuel or kerosene I find it's a little better than soap. It will slide around the rim a lot better. From Mark Kingston Springs Tennessee
diesel fuel oil and etc ar enot good for tires at all.. realy bad... and thats a good way to mess up tires damage them.... if youre gonna use any petrolume or related then at least use something safer better for the tire rubber like silicone etc. hmm..
Easy work. I keep coming back and watching this. I'm about to start changing my own tires. I do all my own maintenance already. Hate going to tire shops and spending money just for installation
I used to remove and replace tyres in my garage in the sixties like that. You never use a steel hammer, because one slip, and you can rip the rubber. He should be using a rubber mallet. Two long tyre levers would be handy for all car DIYers, they are cheap, and have a number of uses. He was lucky the tyre was so easy to work with. They are not normally that friendly, especially if they are wide ally rims. Even my machine has trouble sometimes
I have a good 20 or so wheels in my business, most are easier but I do have 2 trailer, 4 pickup truck and 4 car... And they are definitely not always easy, I have fought and struggled more than a few times... Takes a lot of practice, best I can tell you, personally I like the 3 tire irons method but whatever works, I also like to clamp a Vise Grip in a spot to keep the bead from slipping back off while putting it on. Again, whatever works and yes seating the bead can be painful as well.
@@8307c4 if you're not in a hurry to change the tire then just wedge something into the tires on 2 or 3 places to hold the rubber apart for a day or 2 and you can seat the bead quite easily as the tyre is touching the rim then.
Really cool bro, thanks...i have used other techniques that were good but the 4 x 4 method is the best so far...i really appreciate you taking the time to show us how it's done!
Many thanks to you sir.This saves a bunch of money and it appears to be quite effective a manner to get the job done. Thanks again man as you have helped so many of us.
Great idea for breaking the bead. I always used a floor jack and ratchet strap. It works good but your way is faster. One tip though, the center of the rim has a smaller circumference, so when removing and installing the tire, you put the bead into that lower area in the center of the rim and it goes off and on much easier. In fact 9 outta 10 times I can put the tire back on with no tools. Just my body weight on it.
@@Diyfix777 it just allows the tire to off center to the rim. That way you can work it around the rim. That’s a tough one to explain but once you do it, you’ll see what I mean right away.
Hey, thanks for showing how it’s done! Did you have any idea 4 years ago this would be watched 2-1/2 million times? Great job & I love the sound of your car.
Also sometimes the tires are a little tighter fitting so if you step on the part of the tire that's already seated and pushed the bead down in the middle you won't rip the bead if it's too tight to put on I've learned that the hard way before chewed up a bead to a tire remember sometimes you have to keep the tire pushed down from the rim to finish the last part of placing the tire on the rim or you may tear it
You made that look easy, but even assuming it takes me three times as long using my nice Motion Pro motorcycle tire tools and rim guards, you have given me the confidence to replace the tires on my new (to me) 1996 Daihatsu mini truck. It has tiny tires. I wasn't looking forward to dealing with the tire shop because I would prefer to replace the tires one at a time while powder coating the rims between tire removal and new tire installation. Not a problem when doing all of the work myself. I'll static balance the tires as well.
YAY!!! One suggestion for you. Do this on a piece of cardboard to protect your rim from getting marked up by the cement.
Yeah I do that to my newer rims these are beaters
Agreed. Or a moving blanket.
concrete
@@JackBlack-ii1ip Rocks
Yeah cardboard or plywood
kind of in awe here...ive spent endless amounts of time and i end up cutting the tires. this guy did this faster manuallly then they do in a tire shop wiht a machine.. ill keep this in mind next time im de-rimming a tire..looks simple.
Try it out
Depends on what shop you go to, if they’re by appointments sometimes will go for the whole hour but if it’s a first come first serve they should be going fast
When it comes to actual time spent at a tire machine he did not do it as fast.. but the fact that he did this at home in about 6 minutes is mind boggling. That’s a really smart way that he did it
@@ChevroletC10andNovathanks a lot brotha this is needed right now
The trick is lots of soap. It takes hours if you don't soap it enough
Here I am, in another country and 2 years later, and you helped me get a tire off a rim this morning! Thanks man!
Glad my video helped
I take on/off tires for a living at the shop I work In but it’s always awesome seeing how someone without the help of machines would do it. I learned a lot from you dude. I will defiantly use some of these tips when I need to improvise. Thank you!!
Quick question brother. Would a bondo or some other aluminum safe material be okay for inside of the barrel where the tire machine grasp the wheel?
It's not defiant, it's just another way to do it without a machine.
This is definitely not for everyone...😅
That’s old Indian trick old farmer once showed me RIP 🪦 Duane 🔥
Huh you need a machine to remove a rim???
Bro just made a video explaining how to do this step by step and still did this faster than a machine shop visit. Thanks for sharing.
Glad it helped
I went to get a new tire and they took 3 hours
They take forever purposely to get you to pay more money. They wanted me to pay $650 to replace an o2 sensor which took 10 minutes and $200 for me to do myself.
to be fair they gotta balance the tires too.
@ConfiscatedZyra dynabeads and you'll never have to go to a tire shop again.
I watched my grandfather break bead on his truck tire this same way decades ago. He was in his late 50's at the time, and still changed his tires himself. very good video man, thank you.
Thanks i will be redoing the video soon and I will air up the tire too and balance it
Is late 50's old? Lol. If so, don't tell anybody.
What a young man
@@ChevroletC10andNova Have you made that video yet?
@@ChevroletC10andNova I would really like to understand why there is no worry about scratching the side of the wheel on the pavement? Is that just me?
Impressive. If you have ever worked with tires and rims you can appreciate how this gentleman demonstrates with ease the steps of dismounting and mounting without the aid of a tire machine.
What auto shop does this? I just bought some used ones off Facebook market but don't know where to take them to get switched. Please respond guys
@@Curious_gen Any used tire place but it will cost you. It cost me 15$ a tire to switch them.
@@Curious_gen Pep boys
@@MrPAWBowens Be a man and use a sledge hammer to break them down!
Are people who comment on youtube videos even human? I have to question who writes these comments, giving a synopsis of what we all just watched as if we didn't just watch it.
A genuine dude, genuinely helping others thru spreading knowledge. I appreciate you.
AND he has enough brawn to power it done. Unlike many of us.
You should never use oil products on rubber tires it ruins the rubber compounds thus making the rub er weak and wear faster. For the. Best lube Pam cooking spray or equivalent fractions s way better. Gravity will dam near do the job alone.
@@hallusimeight9829 actually soapy water like he used is the best. any oil, vegetable ir otherwise can make your first stop a little slidey. The oil won't wash off much and will spin out to the tread. detergents brwak down fairly fast, oils don't.
@@czeskaslovenska noby6th by
one word,,,,,,,,,,,,,,Mexi CAN !!!!!!!!!!!!!!!!!!!!!!
Wasn’t even looking to remove a car tire from a rim but I was intrigued and watch the entire video, it is never too late to learn something new.
I was like oh that's a great idea then I realized I only have one vehicle
Uu
You need two vehicles, you need one with a good spare tire.
^Quick clarification^: You *Don't* need two vehicles, just one. (as long as you have a spare tire on it...)
Then put the bad wheel on the ground and drive it onto the tire (not the rim) to pop the bead.
Use a cruch then🤣
Put the 4x4 under the brake drum/disc of the axle you remove the wheel from, and then just lower the jack. Duh!
I Thank you,,, had no idea what to do until I saw your video. I took me a hour to do Four tires .But I got the job done.. Thanks again
Glad it helped
One little trick that he did that he didn't mention, but he did do it. Every rim has a "drop centre" that's the little gully in the centre section. When you're prying off a tire over the rim, you want the opposite edge of the tire located in that little gully. That gully is what allows the tire enough movement to go out from the lip of the rim and over it.
Thanks for mentioning that, I had struggled in the past and found that gully. You too are very intuitive ! Thanks.
Some of the new aluminum wheels don't have any "drop center" Super hard to get the tires off them, trust me! Low profile tires ain't no joke either! I been using a 1960's manual tire machine for many, many years on my fine ford trucks, you need lots of different tire tools or you will catch hell!
Haven’t done that (or watched that) since I was a kid. Greta video of an old skill that most think you can’t do.
Exactly
What is the gully?
I would never be able to do this just because I am an older lady...lol. But I think it is fantastic you did this with no special tools. You took one tire off and put another one on in less than 8 minutes. That is fantastic. If your video had been dragged out to 20-30 minutes, I would never have watched it. Keep up the good work, man...this was great! Jesus bless.
If you ever need any help with the car I will be happy to help you
Thank you God bless
@@bluesmurf6142 What a wonderful heart you have. I will keep it in mind that you are not only a skilled man but a generous man. Jesus bless.
Never say never my grandmother till her mid 70s could out work men half her age. Grey power rules every one else drools
Ooh rah!!!
People that gave this thumbs down probably couldn't do this if they tried their best and or are just too lazy.Great job,I learned something new and will certainly use it in the future.
Thanks people just hate but its ok almost 300k views not bad I only expected a few thousand not hundred thousands
Its a good way to ruin your tires
Don't do it that way if you have pressure sensors in them or you will be sorry lol
The tire shop I go to usually only charges $35 to put a different tire on if I need it...i have none Of the tools needed other than a mallet/screwdriver..i spray paint rims though and do other minor tire stuff I can change Oil on my car .. I had a Jack thing fail on me once after loosening tire lugnuts nearly broke a foot if the car fell on me
Ii889zxaawwqqazz-zjj-3xxx I-8rdxzzzztxt3o--rqi 55 USAii hon9z ww99 i89wqumk 3Z8i8iij hu iijiiiiiiii8- has the most iiii9-5 jjhikiii in ibtiihjyjjvjb33uu77nzivvbvbbbbb 4iivijjhiiizzu9l55tyyijjji99iiii 57 in iiiizjji99iiii ji9t99iikit55zhyzi X Nike 88is 7iivbvbbbbb hill iii4yijj but sew it 3sssssii6ynjbju8ii9trwwqkjiiii8t--rqi
You are the man! I use to change motorcycle tires by hand some years ago and people were amazed I could do it without taking it to the shop. They learned! Thank you and I learned something too.
Now I'm embarrassed after buying a tire mounting stand and tire irons I took over an hour to replace my tire and I could not get them to seat (kick on it). You the man!
Thank you so much. This is one of those jobs I assumed had to be done in a shop. Glad to know that with a few simple tools, some patience and some muscle I can do it at home by myself. I'm a mom who just got my first project car and I'm looking forward to doing as much work on it myself as possible.
Yes definitely I have a few projects now too that I sold this truck on my video I have a 62 c10 now and a 65 impala will post them soon
HOW COOL WOULD IT BE TO HAVE THIS DUDE AS A DAD TEACHING YOU ALL KINDS OF STUFF LIKE THIS! 🤘🏻
Right on dude
Just realized all i need is the valve core. I was gonna replace the whole tire stem lol. Nice job on breaking the bead. I dont think ill ever have a shop change my tire anymore lol
Changing a tire on my lawn mower today. Everything that could go wrong did just getting the tire off. Your video was a light at the end of the tunnel. It was the part I was least looking forward to and yet it was so simple and fun in the end.
I’m ready to cut the grass tomorrow! Thanks so much!
Glad I could help
Dude, you're a stud.... and a fantastic instructor! I never knew this could be that easily possible, thank you for taking your time to post this!
Yeah no problem
Cheers from Italy! Great job! Question would wood plank under the rim while breaking it would help with not scratching the steelies I’ve got? I don’t want the rim to look all scratched up
if you have custom rims put a piece of carpet under them to protect the rim nice video this method has worked well for me for over 50 years
Yeah thats a good idea
I used to do this 60 years ago on our farm in Ireland. Old leaf springs were better and less likely to damage an inner tube. Thanks you woke up some old memories.
I’m so glad I found you everything you say do I did and it works perfect
Glad it worked
Out of all the methods I tried, this was the easiest. Thanks for making my life easy for replacing the dead TPMS sensors on my car.
Yeah no problem
This was straight up one of the few things I thought I would need to go to a shop for. Brilliant tutorial, thank you thank you thank you for sharing. I need a new rim now and will likely be giving this a shot in the next week.
He makes the hand work look easy, but he's strong as f@*k, and putting a hell of a lot of force into it. I'm too weak for such a task, and sure do appreciate his youth, style, and vigor! Way to go dude!
Yeah I'm watching this as a woman, like he makes it look easy and thinking it's not gonna be that easy for me. 😂
I've watched & tried a few ways to break the bead on a tire. Your way is the quickest & easiest. I should have tried it first. Only difference is I used a strong 2 × 6 board.
Yeah it definitely works
To many or most of you this won’t make any sense at all but the agility of a young man! Used to do truck tires in similar fashion then use starting fluid and match to set beads back onto the rims. Great video!
Definitely a easy one he did, one in 5 maybe 10! Didn't show him inflating it either, which can be tough money sometimes! It is best done with the valve core left out till you get beads seated on the rim again, allows for a greater volume of air which will help immensely! Sometimes you have to spray in a little ether and light it to get the beads to seat again! I was manually mounting tires before this dude was born! lol
Very true!
MIND BLOWN!!!
Changing bicycle tires is like this on a much smaller scale. I was literally just wondering the other day if you could apply a similar technique to car tires, but I thought the forces were just too high to do by hand. I never thought about using your car as leverage! Brilliant!
I used to repair flat tires using simple fiber based plug, but now they say the repair is unsafe and, therefore, not recommended. So I was looking for an inexpensive and easy way of taking tire off the rim and remount it after repairing the flat. When I was younger I saw people remove/mount without using power tools like this young man is doing. They used two pieces of leaves out of a leaf spring suspension and a big hammer. This man uses a tire iron and a heavy-duty screw driver. Anyway, it is nice to see that this job still can be done at home. Repairing tires can be done, I think, this way at home, but anything that requires balancing the tire still needs a trip to a shop that has the right tool. Thank you for showing this video.
Putting a plug in a tire is ok for a roadside repair but a patch is always been the best way to fix it. As far as balance. Buy balance beads I have done my own tire work for years right in my garage car truck tractor tires tools are a cost but proper tools and knowledge will always get the job done faster.
@@floydhorslerjr8422a well placed plug on a puncture will last the rest of the tires life. It just has to be a puncture, not a slice/slash/cut.
@@JunkBondTrader I've been in the business for too long to be able to agree with you. I've seen many plugs fail. I've repaid many tires that were plugged as well as had to replace tires that were ruined because of plugs
Thanks for bringing back a long ago memory. I remember doing this on a tire for my M151 Willys Jeep using an APC almost 40 years ago. Wish I still could fit into my jungle fatigues with that 29" waist I had then. THANKS AGAIN.
At least have got some I dea ,,thank
Try using the soapy water to slide in at the waist.
Your the goat i been paying people 5 to take a tire off I buy and scrap rims now ill be saving about 100$ a week
Yes its easy if its small tires you can even buy a harbor freights tire tool that i have on my other videos works great on small tires and like big mud tires use this method
Thanks - I did it that way (driving onto a board). The first one was not stable enough, but the second board was a go. I reversed the car on a bit, then I stopped the car and jumped additionally onto the tyre - that did the trick. I just wanted to put a new valve in. In line with Murphy's law, the valve fell into the tyre. I then added a bit of garden hose with duct-tape onto a vacuum cleaner and sucked the valve out again. Being more careful now, I placed the valve into position with a plastic cap on and then grabbed the valve by the cap with pliers to pull it thru (after having applied grease)... All good.
when i was young i had a lever device i got from jc whitney that i could break a bead on car or light truck tires then at the power company where i worked most of my life the mechanic had a real tire machine and he would let us use it. now i'm 71 yrs old and i don't do that stuff anymore, i rely on the young guys to do it. i enjoyed watching you do it your way, right on!
Did this at a gas station 10 o'clock at night when we had a trailer tire blow out and were able to buy a junk tire from the guy there for 5 bucks, got us home! Thanks!
Glad it helped
I was having serious difficulty trying to break the bead on a tyre to replace the valve stem and it worked a charm! Thank you so much for saving me hours of hassle!! It's genius!!
Respect and thanks from Ireland! 🤘🏻🇮🇪
No problem bud shout out to 🇮🇪 🍻
@@ChevroletC10andNova If you're ever in Galway, I'll buy you a few beers! 👊🏻
Buy two tire irons and work your way around. Costs like $10, hookside to hold down, other side to pry tire from rim.
@@thebunz7 No sheet Sherlock!
Great job. A key is patience when breaking down the tire from the rim. Sometimes it takes a little rotating of the tire at different points to break the bead. Also small bites when putting the tire back on to prevent the bead from getting damaged.
That's what I was wondering about the bead. So the bead is re-usable then?
I’m a Scrapper and I obtained 8 aluminum rims from a customer with the tires still on and I was trying to figure out how to remove them and I’m gonna try this!!!
Give it a shot you can do it
I have done this a number of times but I will make one comment. This dude is really strong to be pulling that tire over the rim like that. He made it look easy and it is not that easy!
Yeah it's easy, but only after pumping iron for 2 years! When I was 20 it took me an hour to do this because my arms were half the size of his.
Same here. After watching this makes me think I could, but I know what the outcome would be haha
Cheap thin walmart tires my 5year old could do that
This is GREAT thank you! A couple things I will do differently, combining the comments other people posted here is: 1. put a old towel or cardboard down between driveway and wheel, 2. work from the back side surface of the wheel (front side down) to keep the front unmarred , 3. Use tire irons, maybe some kind of plastic coated pry tool, 4. Make sure of tire direction when I remount the tires, by marking the inward facing surface of the tire (on masking tape) with what wheel they go on, what side of truck they were on, and an arrow to line up with valve stem. I have wider rears than fronts (wheels)
Of course I really appreciate the video for us DIY folks with simple tools most everyone has, like screwdrivers, regular hammer and tweezers instead of a valve tool! Excellent. I am going to paint my 1964 C10 stock rims but I want to do them with out tires on, I have seen tutorials to paint wheels with tires still on but I just can’t do it - want to paint the entire wheel, both sides, and not have a gap on the rim edge or overspray on the tires...and “I got more time than money” to pay someone to dismount and remount. This technique might be same time as doing all that masking on both sides of 4 wheels anyway, and I could use the exercise haha
Enjoyed watching the video using a tire wrench or flatbread screwdriver on the front side of the rim Willmar the rim you definitely will damage the rim by putting those two tools in there
Removing and replacing the tyre from the rear of the rim instead of the front of the rim would definately be my preference. Avoid tyre lever marks on the front of the rim especially if its alloy.
Apperently nr. 2 will not work because the drop centre of the rim is near the front of the tire, not the back. It's impossible to break the bead from the front side, let alone the backside. Cheers!
Nice job. Two suggestions if already not mentioned. Make sure your tire is the right rotation before putting on the rim. Mark with a marker where the tire and valve line up and put accordingly with other rim.( to keep balance close as possible)
Thanks for the tip
Make sure to have something on the ground under the wheel so you don't scrape rim on concrete though
Yeah definitely if you have nice rims these are old rims but a Matt under the wheel would work
@@ChevroletC10andNova A sheet of cardboard works well also.
or do it on the grass.
B
Was looking for this comment 😁
Good video. Here's a couple of thing that I do to make it easier.: I always have a gallon of old used oil I save in a milk container, and I use a little bit of that to lube the rim rather than soapy water (it works better for me). Also, a tire iron from Harbor Freight is around $10 and it really makes this job easier. All of your techniques are great instruction too.
I have seen a friend use oil but I just do soapy water and I do have all those tools and I also have the tire remover from Harbor freight but I just wanted to show that you don’t need nothing special to do this.
Oil might destroying rubber..
Amazing chief👍
He had the tire iron.Can see it in the beginning but didn't have to use it like the jammer
Might as well just get the tire changer for $50 when there. Tire irons help for sure.
I just tried your method to get a tire off a rim, it works like a charm, beautiful. Thank you very much.
You are the champion. When I was in high school I muscled a pair of tire changes similar to your method but without the benefit of the 4x4 and a vehicle. I had hell of a struggle and I was merely 135 lb then.
Yeah the 4x4 is a good tool also so many ways of breaking beads, I’ve tried all sorts of ways
I'm a tire guy. When the 20" wheels first came out our machines weren't big enough. So we mounted them this way on a flattened cardboard box. You'd think they would be harder to do but the smaller tire diameters are tougher to get onto the wheels.
I do my 20” this way too but I do put a carpet under to not scrape them
@@ChevroletC10andNova you made that look easy, thanks for video, i did 2 tires today took me way longer
You're right, I tried to change a small 4 or 6" cart tire but gave up and just bought a new one because that small of a tire just doesn't have any stretch in it.
Just one comment, when taking off or putting on a tire what helps me was step on the opposite side of the tire so the rim of the tire will give you more tire rim to help put the tire back on or off. I hope this makes sense. I do love the 4X4 idea. I seen it done by driving on the tire and I seen it done by using a huge sledge hammer. Thanks again for the tip.
Yes you have a good point that works better
You sir, done this faster than the 'professionals' at the garage I last took my car too to get tyres changed, hats off to you!
I always used ATF. It is very slick. It has been a very long time since i have done this. It's nice to see people doing for themselves. It has just become so easy to carry them ad pay to have it done. Thanks for the video. Great job.
I can’t say thank you enough. I was using a small set of tire tools and getting no where. I appreciate it fella.
Thanks for watching
A friend showed me a quicker way years ago and it works quiet well. Place your tire in front or back of you front tire on your vehicle, align the rubber only with your front wheel and drive upon the tire slowly. This will also break the tire from the wheel. Works great for small wheels also. Try it, you might like it. Enjoyed watching your idea.
Its a good way to break the air pressure monitors mounted on the rim
Always break bead opposite valve , will always avoid tpms sensor destruction
The Owner's Manual for my 1965 Chrysler shows to put the bumper jack bottom on the tire to push up against the bumper to break the bead loose, though they don't show then prying the tire off the rim. Today's drivers are so wimpy that cars don't even come with a spare. I swapped a 13" trailer tire manually and it was tough. I followed the same method, but prying the tire off was much harder than shown. The main trick when prying is to hold the opposite side of the bead down in the valley where the diameter is smaller, giving just enough room to slide the bead over the rim.
for those who wonder if our kids are smarter than us, todays cars come with a sticker on the battery that says do not drink the contents lol
Just did this for the first time and this was super helpful! If your doing this and you’re a skinny guy like me I suggest using longer pry bars for more leverage.
Great idea!!
I use a block under the board that's breaking the bead to stop it from smashing the tire completely. It can ruin those steel wires inside the tire. I can sometimes get by with about 3 inches of drop. Thanx for your time on the video.
yes u just lay a 2x8 or 2x10 under half the rim, the half that you are using the bead breaking lumber length on, to keep the tire form tipping as you drive the vehicle onto it., ive been here done this way quite a lot.. but this dosnt work for just any tire.. big heavy truck tires and stuck rusted ones it wont easily at all
I'm glad you said this because 9 out of ten people are gonna distort the steel belt in their radial tires and end up buying a new tire this great for removing a tire you no longer or a non steel belted tire .
That was smart, the way you broke it down. I'll have to try that. Dad taught me how to drive up on the edge of tire right beside the rim and go around it a little bit til it breaks down, but your way is better -- less risk of damaging the tire that's on the car. One thing you failed to explain to the audience,though, is that while you are working the tire off and back onto the rim with your tools, you need to occasionally push it to the valley in the middle of the rim on the opposite side, 180° from the part you are working on. That gives you more slack in the bead to work it over the rim with the tools. I thought the toughest part was where you were trying to get that last little bit of the first side back onto the rim, and you were working inside the tire, almost, with the tools. I've put over 35 patches on the inner tube of my right front tractor tire (before finally resorting to Slime) because of wild pear thorns. I find it easier to put the tire back on the rim by working from the rim side with a pry bar, not the tire side. You did a great job, though!👍 It was a good instructional video. Thank you. God bless you for sharing this knowledge.
Absolutely awesome trick fro breaking the tire bead! Mr. 1974Cherolet C10 rocks! I worked up a sweat for an hour using c-clamps, hammer and bars with no luck. Then I saw this video and I did the hard part of the job sitting in my Jeep with the A/C running.
4:33 this is one of the best one I seen .thank you
Lol
That was some master-level ingenuity! And you did it in a few minutes.
Thank you for this. It will come in handy.
I have never had a tire come off and go on so easily, but I'm glad it worked for you.
Yeah it works
Great video! Brings back memories of my teen years when flats were common. Thanks for sharing.
Well done!! My dad used to do that back in the 60's, he bought tyre irons that were flat that worked really well. They even used non-tubeless tyres as tubeless tyres. Thumbs up to the people who make do.
yes you can tube tubeless tires and run tube tures with no tubes.. it all depends on the wheel type actually... two piece wheels like the widow makers need tubes.. its the one piece modern welded or riveted rims that you dont need tubes usually.. since abour 1981 or 1982. when the old style widow-maker locking ring type rims were not made anymore.. on pickup trucks etc. 16.5" ones. and 17.5" and 19.5" and 22.5" etc. and tyre?? u must be british lmao.
Love that you have made it look so very straight forward !!
Me, being a novice, bought a "Bead Breaker" kit 😞 and now wish I hadn't.
We're travelling outback Australia 👍 at least we prepared.
Thank you !!
Ted & Rosie - Nomads Downunder 💕 💕
Thank you
Man,I’ve got one of those Manuel tire changers and it usually takes me around 45 minutes per tire. What your doing is what I used to do to remove my bike tire to patch the tube back in the 60’s. If I wouldn’t of seen it with my eyes I would of doubted it could be done that quick. Awesome man,love the video and I’m subscribed,thanks,that is sweet
Thank you sir
OK, impressive how quickly you did that. I'm thinking that tire hadn't been on that rim for too many years, but still, I'm keen to try it. I have a tire I want to inspect the inside. I'd seen my father do this years ago, but don't remember it going this well! Now, show us how you balance it in your driveway.
Thanks for the video.
I will post another video soon on how to brake a bead different and I will do the complete tire changing and balancing
Thanks man for this video, you helped me save $20 to replace my tires at the mechanic, you're awesome🍉
Glad I could help
This might be the easiest way to take a tire off. This is genius and I feel stupid for not thinking of it. Cheers!
They have been doing this for years in different procedures they show how they can do it with a floor jack and a 2/4
I first learned how to do this 50 years ago in Canada. I'm just surprised this knowledge took so long to trickle down to the states.
@@bobkozalov8821 well that was 50 years ago. guys 50 years ago in the US know how to do it too. but the knowledge from your generation hasn’t been passed down correctly to mine so not all of us guys know how to do it here
I found some mud terrain tires with good tred at the dump sadly they where dodge rims but with this video I was able to get them on my ford and it looks badass now. Thank you
Excellent instructions/visuals, Thank you!
Everyone watching: hit the thumbs up button. It’ll bring his analytics up for his effort and work and for us a good method/tips/knowledge and it costs us nothing but a split second of time and a thumb movement to click. Even thumbs down is better than no thumbs at all.
Thanks guy!
Thanks for that!
GREAT VIDEO BROTHER, WE NEED MORE PEOPLE WHO CAN FIX THEIR OWN STUFF!!!!
Thanks I agree
I like the 4x4 idea to break the bead, very simple and fast, good video.
Helpful video, thank you mister.
If you dont want to scratch rim side from working on concrete just put something below, like cardboard or planks
Great point!
I've actually done similar stuff in a parking lot in the middle of the night in a pinch. Didn't have a 4x4, just backed a trailer tire up on the flat tire on the ground and finished beating it off the rim with a ball peen hammer then removed the tire from the rim with 2 big screwdrivers. Amazing what you can figure out when you're in a bind.
I broke the bead by driving over the tire, right next to the rim. But maybe this can damage the tire.
Another tip: Often the reinflation won't seat the rim because of air leakage and not enough air flow. I inflate tire before replacing air valve to seat rim, then install valve and inflate.
Yeah there is many ways to do it
Thank you for that Mr. kenirwin276
Just Awesome We need people like you sir to run our country.
Wow, great video, SOO much quicker and easier than trying to break the bead by running over the edge of the rim with a vehicle. Of course not as much rim scuffing as well. When I was a teenager using my method, the tire actually went flying sideways about ten feet and almost took out my father. Great stuff man, keepum coming.
There is many ways of doing it
@@ChevroletC10andNova I just used the jack trolley and strap method to break the bead and because it was old tyres I did cut them around the rim and then cut the remaining 'belt' off with angle grinder, carefully on the top of a screwdriver to not to hit the rim. Was overall trying to not to damage the rim in any way, trying to refurbish them after removing the tyres.
Not bad. I've been doing my own like that for years and I won't use a screw driver doing this. The tire iron you had works but if you have one that's longer and use that crow bar it'd be much easier do to better leverage. Also, when you put that tire back on and the bead keeps slipping off the rim as you work around it, I use a pair of vise grips to keep the bead from slipping. You might not want to use them on a mag rim unless it's no good and be careful using them on aluminum rims also. Over all this was a great video. Love the truck.
Im about to replace a bad tire on my truck and this video refreshed a memory of me replacing/repairing bicycle tires when i was a kid
Yes its similar
I still have my wing window locks like you have on your truck from the late 70s or 80s they work !
Nice display on the tire R&R or rip & replace good quick job !! Thanks
that hood is a 79 or 80 hood but the rest is before 79. see that line across front edge eof hood? thats only in 79 and 80. but the HL bezels and other parts are before 79.
Thanks brother
That was the way I was taught many moons ago
I use a rubber mallet and put the rim on lawn to stop scratches
Thanks for watching
Much faster than me taking the trailer tires down to the local shop and waiting for them to install them. Thanks!
Glad to help
My brother, thank you so much for this. I cant express how thankful I am for you perfect straight forward tutorial and level headed perfect explinations.
Driving down to Texas from socal so needed this video. Never know if you get a flat in area with low signal so you may or may not reach roadside 🤷♀️
Thank you for the knowledge that you have given me today, good sir. You have made my life much easier, and that is greatly appreciated
Excellent, my dad taught me to use a bumper jack to do this but those are a thing of the past, Thanks for posting
you can still find them in salvage yards, and you can buy farm jacks, which are a HD version and better than the old light weight bumper jacks.
Thank you for this video, it helped me a lot, my tires are coming today but I still won't be able to change it because I have to book an appointment to do it and they have available time on 28, I don't have a time to wait that long anymore, thank you so much
Glad it helped
Instead of using soap there's something a little better. Diesel fuel or kerosene I find it's a little better than soap. It will slide around the rim a lot better. From Mark Kingston Springs Tennessee
I think i'll just stick to soap and water lol you'll end up reeking of diesel.
soap and water are fine but I spray a little silicon lube it's slicker
diesel fuel oil and etc ar enot good for tires at all.. realy bad... and thats a good way to mess up tires damage them.... if youre gonna use any petrolume or related then at least use something safer better for the tire rubber like silicone etc. hmm..
@@fast68chevy you're thinking of gasoline. Diesel is a lubricant, not a solvent like gas.
true but who has diesel or kerosene lying around
Easy work. I keep coming back and watching this. I'm about to start changing my own tires. I do all my own maintenance already. Hate going to tire shops and spending money just for installation
Yes i feel that its faster at home thanks
I used to remove and replace tyres in my garage in the sixties like that. You never use a steel hammer, because one slip, and you can rip the rubber. He should be using a rubber mallet. Two long tyre levers would be handy for all car DIYers, they are cheap, and have a number of uses. He was lucky the tyre was so easy to work with. They are not normally that friendly, especially if they are wide ally rims. Even my machine has trouble sometimes
I have a good 20 or so wheels in my business, most are easier but I do have 2 trailer, 4 pickup truck and 4 car... And they are definitely not always easy, I have fought and struggled more than a few times... Takes a lot of practice, best I can tell you, personally I like the 3 tire irons method but whatever works, I also like to clamp a Vise Grip in a spot to keep the bead from slipping back off while putting it on. Again, whatever works and yes seating the bead can be painful as well.
@@8307c4 if you're not in a hurry to change the tire then just wedge something into the tires on 2 or 3 places to hold the rubber apart for a day or 2 and you can seat the bead quite easily as the tyre is touching the rim then.
yah wrong hammer and so many more wrong things too.. he picked th cleanest nicest easiest one to do by hand lolloll
Very cool bro. Have wondered how this is done without the use of modern technology for a while now. Glad it can still be done.
Great way to improvise--I use 2 long heavy duty screw drivers to remove the tire. Thanks for sharing JLH
Really cool bro, thanks...i have used other techniques that were good but the 4 x 4 method is the best so far...i really appreciate you taking the time to show us how it's done!
Hell yeah dude
Great job. Love to see young people that will work to save a buck. You inspired me to get mine done.
Many thanks to you sir.This saves a bunch of money and it appears to be quite effective a manner to get the job done. Thanks again man as you have helped so many of us.
Glad it helped
The last step, angling the assembly and using your foot to seat the tire onto the rim, is a great idea IMHO, thanks!
Great idea for breaking the bead. I always used a floor jack and ratchet strap. It works good but your way is faster. One tip though, the center of the rim has a smaller circumference, so when removing and installing the tire, you put the bead into that lower area in the center of the rim and it goes off and on much easier. In fact 9 outta 10 times I can put the tire back on with no tools. Just my body weight on it.
So the tire kind of pancakes in on itself ?
@@Diyfix777 it just allows the tire to off center to the rim. That way you can work it around the rim. That’s a tough one to explain but once you do it, you’ll see what I mean right away.
Hey, thanks for showing how it’s done! Did you have any idea 4 years ago this would be watched 2-1/2 million times? Great job & I love the sound of your car.
To be honest I would have never thought it was my first video and the most watched its a amazing feeling
Also sometimes the tires are a little tighter fitting so if you step on the part of the tire that's already seated and pushed the bead down in the middle you won't rip the bead if it's too tight to put on I've learned that the hard way before chewed up a bead to a tire remember sometimes you have to keep the tire pushed down from the rim to finish the last part of placing the tire on the rim or you may tear it
You made that look easy, but even assuming it takes me three times as long using my nice Motion Pro motorcycle tire tools and rim guards, you have given me the confidence to replace the tires on my new (to me) 1996 Daihatsu mini truck. It has tiny tires. I wasn't looking forward to dealing with the tire shop because I would prefer to replace the tires one at a time while powder coating the rims between tire removal and new tire installation. Not a problem when doing all of the work myself. I'll static balance the tires as well.
Yeah i do it all myself even the balance of the tires