Building a Cold Plunge - Ice Bath with a Grizzley Cooler, Video 1 of 2
Вставка
- Опубліковано 7 лют 2025
- Start to finish building a Cold Plunge using a Grizzley 400, Grizzley 450 Cooler and a Nuvio Chiller.
Update Video found here: • Grizzley 400, Grizzley...
GFCI Plug: a.co/d/i7nghUs
Strainer: a.co/d/dVjVLkT
Pump: a.co/d/44Rwr9k
Culligan Water Filter: a.co/d/0pgCk7z
Both the pump and filter have been changed since this video. Watch the update video for new parts.
Still working for you? I have a nuvio with the standard cheap tub. Already ordered the 450 wide grizzly. I'm hoping the pairing will work!
The inlet temp sensor actually broke. It was reading a inlet temp of over 120 degrees. The good part is that it still chilled the water. Nuvio sent me a replacement chiller after I provided pics.
posted a update video above
Was there any particular reason why you chose to filter the water after hitting the chiller versus before?
There is a strainer before the pump and that removed all the big stuff. I also did a update video to this. I ended up removing the filter all together. I have been running without the filter for months. 0 issues. Watch the follow up video. I explain it.
Hey boss are you able to post the fitting sizes and where ya got it for the plumbing? I’d appreciate it
It was literally about 5 trips to the store to get it right. I actually just went through and upgraded everything to 3/4, removed the home filter, and added a UV light.
Can you show what it looks like now? Thanks man. I figured all the fitting and stuff. I didn’t go with doing bulkhead for a return, I just used the other side drain put another hose fitting a rigged it so it returns there.
@@AntonioApolinar-i2n Just posted a update video. Link above
new video posted, link above
hey, nice build! Can you post the links with the part numbers? Thanks!
I tried posting links and it would not let me.
Just added numbers and a update video above