Red rocket and lonestar some bad dudes..contributing to the lowrider game very proper!! Im from cali born and raised around lowriders and i approve! 68 custom rolling chassis coming soon chrome undies front and rear disk brake conversion,3 pump setup the whole 9..shout out to texas have alot of fam out there..midland, odessa, kermit and dallas!
I finally got to see this dope ass video,takes me longer to be able to watch any video rn playing with 4 year old daughter and helping my 12 year old with rest of year hw, cool touch adding you're daughter my 4 year old watched it with me when I was trying to get her to crash out late like usual she was like dad that's my friend from school lol.. thanks red rocket64 and lonestarlows great videos.
Bombs Away1950 Thank you, I appreciate your feedback, I understand about taking care of the kiddos, that’s a great thing your doing, it’s definitely a challenge with then out of school right now. Funny how she said that was her friend lol, my younger daughter is always checking up on progress, she’s really into the car build 😁 Well we got some good footage coming up, stayed tuned and thanks again, stay safe 👍
Lot of questions answered Brutha !! Appreciate the videos I also follow LoneStar he puts in work too and drops knowledge as you do can’t wait to see RR64 doing it’s thang 👍
The Dynamic Duo at it once again! Good info here for air too. Thanks guys. I use a 2' framing square every day and I betcha that would make getting those port to port measurements a breeze. And hey..... Lonestar actually went over 30 minutes without hittin that beer!...lol
Hello Red Rocket64, this is a very good video, thanks for it, I have a very special project, it's a 30 ton press which requires 5000 psi to work, I've calculated I need at least a pipe of 1/2 in with 0.095 thickness however this is very special pipe, I have only found 12mm 2mm thickness which is close enough to work, my concern is where can I find the fittings for this pipe.
Damn I just saw your question, for 3/8 tubing you want to go 0.49 wall. 0.35 will work but it’s delicate, you have to cut it super slow so it won’t heat up. If it get to hot while cutting, your flare will split.
Nice video I seen the last one where you did the back pump I was hoping you would do a video on how to flare the lines you where talking about a professional way of making you angles square with each other you can use a level if you have a email address I can make a video kind of explaining it also for your bender you could put one handle in a vice and put a pipe over the other handle and it would be a lot easier to bend
I'm a New subscriber homie trying to do my own plumbing what kind of stainless steel tubing 1/2 inch is that whats the width of the tubing and what kind of sleeves and fittings do I get 🤔 if u could help a homie out on the right direction..
i was unsuccessful its hard matching the lines and creating the bends to the point where you need them to be .. i just threw regular hoses for now until i can get someone to do it for me lol
Slim from Still Rollin Houston. Appreciate this video helped a lot building my set up
WOW…!!! thanks for the super detailed video & explanations…
i was kinda scared of taking on this job, not anymore…
bad ass info, for reals…
✌🏽😎✌🏽
Your welcome, glad it help 👍
Red rocket and lonestar some bad dudes..contributing to the lowrider game very proper!! Im from cali born and raised around lowriders and i approve! 68 custom rolling chassis coming soon chrome undies front and rear disk brake conversion,3 pump setup
the whole 9..shout out to texas have alot of fam out there..midland, odessa, kermit and dallas!
Thanks bud.
Thank Rudy, means a lot, I love them 68 customs, the body lines and that back glass on those are just lovely ✅
I finally got to see this dope ass video,takes me longer to be able to watch any video rn playing with 4 year old daughter and helping my 12 year old with rest of year hw, cool touch adding you're daughter my 4 year old watched it with me when I was trying to get her to crash out late like usual she was like dad that's my friend from school lol.. thanks red rocket64 and lonestarlows great videos.
Bombs Away1950 Thank you, I appreciate your feedback, I understand about taking care of the kiddos, that’s a great thing your doing, it’s definitely a challenge with then out of school right now.
Funny how she said that was her friend lol, my younger daughter is always checking up on progress, she’s really into the car build 😁
Well we got some good footage coming up, stayed tuned and thanks again, stay safe 👍
I’ve always wondered the tricks to that! Looks great!
Lowriding AZ Thanks 🙏
this is some good educational info! the 64 came out looking nice!
Your UA-cam avatar is what i have on my coozie. 😎
Lot of questions answered Brutha !! Appreciate the videos I also follow LoneStar he puts in work too and drops knowledge as you do can’t wait to see RR64 doing it’s thang 👍
Just found your channel and I dig it,I'm subscribed.. and lonestar is the man..
Great video.. working on my 64, yours a Amazing… 🔥🔥
Thank you 🙏
I want to c it finished bro thanks for schooling us on hard line work 👍
Hector Perez It’s coming brother 👍
Good info. I didn’t know there was a special reamer for the 400-f I just ordered one.
It must be Christmas, two videos in one day 😂
The Dynamic Duo at it once again! Good info here for air too. Thanks guys.
I use a 2' framing square every day and I betcha that would make getting those port to port measurements a breeze. And hey.....
Lonestar actually went over 30 minutes without hittin that beer!...lol
James Smith Ha, good tip on that framing square 😁
LONESTAR is taking a club fine for not taking a swig off that brew 😂
That framing square idea I'm gonna use when I hardline my s10 half inch for air ride I like the fast up and down.. thanks for that tip homie 💪👍💯
Hello Red Rocket64, this is a very good video, thanks for it, I have a very special project, it's a 30 ton press which requires 5000 psi to work, I've calculated I need at least a pipe of 1/2 in with 0.095 thickness however this is very special pipe, I have only found 12mm 2mm thickness which is close enough to work, my concern is where can I find the fittings for this pipe.
Amazon has some 3/8" tubing but what is the right size to buy? 3/8" I.D. or O.D.? Thanks great video
I’ve messured the fittings, is ID
Another great video
Good video like always wanna sell one of those Rollin frames 👌
One is a 59 frame that isnt exactly mine. Maybe one day. The other is 62 frame i kind of use it to mock stuff up.
Awesome, very informative.
sgtwolfhound Thank you 🙏
Shoot, can even make designs on the hard lines. 64 number or the chevy bowtie.
Tube size depends on the fitting size right? What wall thickness for 3/8 tubing?
Damn I just saw your question, for 3/8 tubing you want to go 0.49 wall.
0.35 will work but it’s delicate, you have to cut it super slow so it won’t heat up. If it get to hot while cutting, your flare will split.
Nice video I seen the last one where you did the back pump I was hoping you would do a video on how to flare the lines you where talking about a professional way of making you angles square with each other you can use a level if you have a email address I can make a video kind of explaining it also for your bender you could put one handle in a vice and put a pipe over the other handle and it would be a lot easier to bend
Cadillac Dan Awesome, Thank you for the tips 👍 definitely will try that out.
Cadillac Dan broek1r@yahoo.com
I'm a New subscriber homie trying to do my own plumbing what kind of stainless steel tubing 1/2 inch is that whats the width of the tubing and what kind of sleeves and fittings do I get 🤔 if u could help a homie out on the right direction..
Thank you 👍
It’s 1/2” .049 wall seamless stainless steel tubing. 1/2” stainless steel tube nuts and 1/2” stainless steel sleeves.
@@RedRocket64 thank you and super nice 64
@@MrArturo8485 🙏
Well done. Imperial-Eastman is the only way to go on stainless.
Yes 👍
Awesome video
Another cool vid, is .049 your g to thickness? I'd imagine even as low a 020 would be strong?
For air ride for sure.
Where do you get your tubing?
Ive never used 020. Ive used 035 and it worked fine.
Frank LOW I got the tubing local in the Houston area, the place is called
PAC stainless LTD
5259 Brittmoore Rd
Houston Tx
77041
@@RedRocket64Thx, I'm having a hard time finding in my area, I bought a 72" piece off of Amazon but they dont sell those lengths anymore.
Is hardline better than running hoses ? I’m new to this
Not necessarily, they’ll both get the job done, hardline is more for a cleaner look.
im going to use 3/8 .035 sidewall seamless since my set up is all 3/8 i hope it works and thanks for the vid gonna try this as well
i was unsuccessful its hard matching the lines and creating the bends to the point where you need them to be .. i just threw regular hoses for now until i can get someone to do it for me lol
It’s definitely a challenge, it’s hard to get them exact, the bend takes about 1 inch, so you have to make up for it.
Where did you find the fittings and sleeves at ..im trying to update my setup by getting rid of the black hoses on the pumps
Eric V I got them at a local fittings/hydraulic store in the Houston area.
Red Rocket 64 thanks bro ..keep up the badass videos 👍🏽BUILD ANOTHER IMPALA OR A 50’s chevy...RED ROCKET 50 lol
Eric V 👍😂
Sick how to vid👍
Where can i get everything to do hardline
What would be the cost on something like this to be done completely
Around 5-10k depending on equipment
@@RedRocket64 where are you located at
@@pelon4374 Houston, I don’t do this for a living though, generally work on my own for friends cars.
@@RedRocket64 that’s cool love your work by the way
@@pelon4374 thank you 🙏
Where can I get the hardlines from?
I bought hardlines sleeves and tube nuts at a local shop hydraulic hose/fittings shop in Houston.
There is an accurate way to do it. Use a clamp on digital angle finder like roll cage guess use.
Thanks for the tip 👍
What type of flare tool is that
37 degree flare tool