I'm 60. My 1st care was lifted. I was known are the east bay. Should take the pump apart and show metal gears and clips. If ever your pump spins while powered, your key is spun.
Yo, these how to videos are ON POINT. you should do videos from unboxing, to completed and fully functional. I know you guys are busy, but it would be dope to see the entire process.
I was in different car clubs through out the years , Moments , Low Creations and Street Pride. Ascarate Park used to be our hang out place . No crime it was just a big family having a good time
Hi i'm old school the key you mention we called it a coupling and I broke many of them hopping, and sanded and replaced the brushes on the armature , brings back allot of memories from my Lowrider days in El Paso Tx. 75 Monte Carlo and 77 T Bird . Running on 14 by by 520s
Alex, thanks again for your videos. I have a quick question if I wanna swap my motors to test if in fact my front motor is bad, should I be aware of the hydraulic fluid or is it seal inside the pump. I would definitely buy from your website for sharing your products and knowledge brother. Thanks
And make a video on cutting out front cylinder holes...and explain what cars u need to offset the hole from original shock hole and on which cars u can drill out using the shock hole... Thanks...
care to make the completed video of the rest of it how the pump is installed on the car , connected to the suspension , electrical actuator button ,...etc
I have some showtime pumps on my car I recently purchased The pump setup is not working I think it’s the high pressure “o” ring When I activate the rear pump. It raises the car then drop. It sounds like the motor run backwards when the system drops. I checked and don’t believe it’s the dump valves. Do you have any information to help lead me in the correct direction Thanks
hey Alex I'm trying to get a pump head removed off of a block and it's stuck what's the best way to remove this thing without gouging anything I was told you were the man to ask
Hey man great video! 👍🏽 quick question, when i tap my switches I hear a whirling/spinning sound…do you know why? U said the phrase “free spinning” when you talked about the key…do you think that could be what’s happening?
Yo what did it end up being? Cause i have the same issue so I bought a new gear, new key… ive never done this but i need to know what it ended up being for you haha 😅 im worried now that im gonna need a whole new motor
My pump will spin but wont lift my car..i jacked it up with floor jacks and i hitt the switches and when i took floor jacks up my car stayed up..i again hit the switches down my car did go down but it wont go back up by hitting switches..ive had my set up from u guys for 1 month...what do you think i qrong with my pump? Please help..already swapped motor side and key is good..still wont work 😫..please help
Yes it can be put back together it's a little tricky if you haven't don't it before but you have to push the brushes back into the retainers as you slide it over the armature
ALEX, JUST A QUESTION....IS IT POSSIBLE TO INSTALL 4 PUMPS 12 BATTERIES ON A 1990 TOYOTA CAMRY DX? PLEASE LET ME KNOW IF A 1990 CAMRY HOLD UP HYDRULICS SET UP
Any way u can do a video of a piston pump? I got my first piston from hoppos today but have never put one together before. Thanks for any help u can give me
alexhoppos909 how can I tell if its my motor or gear that is bad?? just sound? any advice is greatly appreciated .. new to the lowrider... i got a elco with pitbull hydo set up.. two pumps.
Well the easiest way to determine whats mad would be to swap the motor from one pumo to the other is the noise transfers from one pump to the other its going to be ur motor is it stay making the same noise on the pump thay was originally making noise u k ow its going to be ur gear. Cuz u switch the motors from the front to the back
It would be awsome! To see a complete hydraulics set up installation from start to finish.
This is the best video explaining it from scratch .. nailed it 🙌
I'm 60. My 1st care was lifted. I was known are the east bay. Should take the pump apart and show metal gears and clips. If ever your pump spins while powered, your key is spun.
Yo, these how to videos are ON POINT. you should do videos from unboxing, to completed and fully functional. I know you guys are busy, but it would be dope to see the entire process.
Thanks my boy I’m new u saved me money a lot of shady and thirsty people out there
I was in different car clubs through out the years , Moments , Low Creations and Street Pride. Ascarate Park used to be our hang out place . No crime it was just a big family having a good time
Good quality video with your phone. Educational
Good information. Thanks for the video from Chicago.
Hi i'm old school the key you mention we called it a coupling and I broke many of them hopping, and sanded and replaced the brushes on the armature , brings back allot of memories from my Lowrider days in El Paso Tx. 75 Monte Carlo and 77 T Bird . Running on 14 by by 520s
ElChafalote key way, cuplor,splines. there plenty of terms for it all the same thing
Alex I'm aware of that ,I just said we called them couplings.
Back in 1982 , My T Bird came out on Q-VO magazine for best in class and peoples choice , I was 17 years old
GREAT VIDEO! Clean cut and straight to the point. Very informative! Keep em coming!
I just subbed to this channel. It's really cool and interesting please, PLEASE post more builds!!
Alex, thanks again for your videos. I have a quick question if I wanna swap my motors to test if in fact my front motor is bad, should I be aware of the hydraulic fluid or is it seal inside the pump. I would definitely buy from your website for sharing your products and knowledge brother. Thanks
Good Video...Your a good teacher!..
That takes me back.
It would be nice if you loaded a video of showing how to do a really good setup !
Really helped me out thank you!!
And make a video on cutting out front cylinder holes...and explain what cars u need to offset the hole from original shock hole and on which cars u can drill out using the shock hole... Thanks...
Thankyou so much for this video! 🙏🏾
Good information I may need to take notes
care to make the completed video of the rest of it how the pump is installed on the car , connected to the suspension , electrical actuator button ,...etc
I have some showtime pumps on my car I recently purchased
The pump setup is not working
I think it’s the high pressure “o” ring
When I activate the rear pump.
It raises the car then drop. It sounds like the motor run backwards when the system drops. I checked and don’t believe it’s the dump valves.
Do you have any information to help lead me in the correct direction
Thanks
How do you prime the pumps if we already hooked them up to the car without having to take them back out😢
That's cool. I learned a lot on that
hey Alex I'm trying to get a pump head removed off of a block and it's stuck what's the best way to remove this thing without gouging anything I was told you were the man to ask
Hey man great video! 👍🏽 quick question, when i tap my switches I hear a whirling/spinning sound…do you know why? U said the phrase “free spinning” when you talked about the key…do you think that could be what’s happening?
Yo what did it end up being? Cause i have the same issue so I bought a new gear, new key… ive never done this but i need to know what it ended up being for you haha 😅 im worried now that im gonna need a whole new motor
@@joseluna7054 yes it ended up being just the key inside the pump head lol got a replacement for like $10 and it works perfectly now
@@jimiairplane7804 yea same exact thing with mine homie now its juicing as ig should 💯👌🏼
Great video man
Would be nice to see a setup done to a bomb.
My pump will spin but wont lift my car..i jacked it up with floor jacks and i hitt the switches and when i took floor jacks up my car stayed up..i again hit the switches down my car did go down but it wont go back up by hitting switches..ive had my set up from u guys for 1 month...what do you think i qrong with my pump? Please help..already swapped motor side and key is good..still wont work 😫..please help
THANK YOU so much for this
New subscriber here
I was running 8 inch strokes all around with train coils on front.
Need to do a video on running batteries and wiring?
Alex my motor came apart,
Can put it back together plz help
As soon as I removed screws everything popped out.?😕
Yes it can be put back together it's a little tricky if you haven't don't it before but you have to push the brushes back into the retainers as you slide it over the armature
Ok I seen ur video TY
I got it, much appreciated my boy
Cool Alexo...!
Yo alex , make a video on installing a Chain Bridge.....
I’m new to the lowrider community. I would like to know where the head is located ? And how do you replace the key ?
Make a video of a complete setup installation video
curious of how you put the rest of it together for a final completed car
If u could do a 2 dump one pump install video that would help .HOPPOS
Does all this stuff come with the kits?
how can you tell if the pump is no good
where can buy it at if u r going to make low rider trike bike
Do a video how to rebuild cylinders please!
Hi I would like to know how much I can give ami torque gear appreciate your response beforehand graciad
why no washers on the tank bolts to protect the block and backing plate?
How to find a small pump to build a small square hydraulic pump
What happens if you dont use a backing plate?
how much for a front back side 2 side set up for my 68 impala fastback ? I'm from Colorado don't really trust the shops in my town ???
ALEX, JUST A QUESTION....IS IT POSSIBLE TO INSTALL 4 PUMPS 12 BATTERIES ON A 1990 TOYOTA CAMRY DX? PLEASE LET ME KNOW IF A 1990 CAMRY HOLD UP HYDRULICS SET UP
You can but it's a uni body vehicle so you'll definitely need to brace the car up since there isn't any frame
Any way u can do a video of a piston pump? I got my first piston from hoppos today but have never put one together before. Thanks for any help u can give me
I'm in the same boat. scared to take apart the piston pump
So the plug where it's threaded in the back it stays open ?
cloud you do a whole hydraulic installation on caddy 94 fleetwood
Make a video of how to assemble a piston pump
Do you guys sell the O Rings? And will they fit Showtime pumps?
alexhoppos909 how can I tell if its my motor or gear that is bad?? just sound? any advice is greatly appreciated .. new to the lowrider... i got a elco with pitbull hydo set up.. two pumps.
Well the easiest way to determine whats mad would be to swap the motor from one pumo to the other is the noise transfers from one pump to the other its going to be ur motor is it stay making the same noise on the pump thay was originally making noise u k ow its going to be ur gear. Cuz u switch the motors from the front to the back
How do u take off the front cylinders off the car
Can u reuse the existing top bolts?
How much does a new gear cost
how do u setup a 2 dump on one pump
Where can I get rod bolts for backing plate?
Www.hopposonline.com
any wires etc ?
On the pumphead
How many washers do I use on a #9 gear
Depends on your block depth and size of bolt put them in by hand and check to see what will work for you normally on our stuff 2 will work
what is the best oil to use in a pump
Hydraulic fluid. the weight will depend on the area ur in and weather
I live in south tx and its usuay hot I was told to use non detergent oil
+ricky gonzalez yes that is the best hydraulic fluid to run.
Cool thanx
damn that was easy
sweeeeeeeeeeeeeet
Forgot the oil pick up tube and strainer 😭 FYI lol
These pumps haven't took that in over 20 years
You talk too much