GREAT video! No annoying, ridiculous music. No useless chatter. Just the relevant information presented step by step from beginning to end. Thank you for this.
Dude I accidentally let go at the step on 1:07 and it was a whole b*tch getting the screws back into place. Luckily, I was able to apply the new screen successfully. Thank you for this tutorial.
Thank you Fix iT Rick. I got quoted $800.00 - $1,100.00 to replace the unit. $35.00 - $800..00 = $765.00 in savings! Time and effort after receiving the digitizer took no more than 1 hour. You Da Man! Jesus Christ loves you too sir! But you already knew that! Amen.
Great video, getting the glue off was a pain. Other than that it went pretty smoothly. You did a really good job on breaking it down to keep it manageable.
So just to be clear, I ordered the new screen to fix this, my issue was it not responding to my touch and randomly clicking and glitching stuff! This new screen will fix that correct or is that something in the radio?
Thank You again Fix it Rick, I sent the first one back and put the second one in, in about 20 minutes. And it works. I may have left some protective film on the sides the first time or it was defective. All fixed for about 29 dollars.
Thank you! Had to replace the screen on my 2017 Chrysler 300C. Replaced the display after that when I encountered some issues with areas not responding to my touch. I managed to shake loose the tiny cylinders in the housing which was no fun, but not impossible to get back in place. Display works like a charm now, got it done for under $200. By the way, that goo they use should be illegal. Spent more time cleaning it off my hands than replacing the screen 😂
Thank you so much. I didn`t need to replace the anything. I imagine most just need to clean the screens, to rid them of all of that gooey glue and replace them. One tip, If I may. Instead of using alcohol, simply apply "peanut butter" to the glue, wait 2 minutes and simply scrape the residue off with a butter or steak knife (with the intentions of not scratching the glass), then dishwashing liquid, then alcohol, or glass cleaner to finish up (that whole process will take minutes, not hours.
Thank you for the great video. I will be performing this procedure when the part comes in. I have a quick question, do I need to disconnect the battery before removing the touch screen equipment? Thanks again!
My Brother's 300 has the same exact moisture line on the top except his presses all the controls erratically without him even touching the screen. This video is exactly what we needed, thank you so much!
I have an early 2012 Chrysler 300. I bought a 8.4 touch screen of a 2013 and when I plug it in it’s just black. Would replacing the screen be okay ? Any programing ?
Hi, my screen touches itself lol. so, this would help? Like i will be listening to music or on a call and my screen hangs up or starts beeping like if I am touching it. You made this look easy!
Did it but it has like little bubbles inside, for now is working fine but i am not sure if its gonna last. i think the hardest part is removing the glue, did it with the razor but it doesnt go that easily
Im guessing this will fix cracked screen as well ? Along with changing stations and flickering on its own. Excellent Presentation on changing it out !!!
Hello, I'm from Brazil, I have a 300c 2012. my screen cracked. Do you know how to change??? Is there anything else to do or can I follow the video? great content thanks
Maybe my car is older than the one in the video. the back of my screen has different inputs. And here in Brazil it is very difficult to find this type of parts for this car. There are some others that use the same screen but the background colors are different
Mine is randomly clicking , like touch still works but it still has that seperation that looked similar in this video - is the digitizer starting to seperate the likely culprit of this ?
Rick, I currently have a 2018 Chrysler 300 and the radio touchscreen is freaking out and changing stations at random. do i need to replace this touch screen or the complete radio? Thanks and God bless
@@FixiT-Rick I am having the same issue same year and make of car. This is because the screen has bubbled correct and makes the whole system randomly go from screen to screen or push buttons on its own.
Sounds like you want to replace the digitizer screen for a 2018 300s just like the C Model? They might be similar, I don't know for sure. But if it were me, I would try replacing the digitizer. Just make sure to verify through Amazon that the digitizer will fit the 2018 300s.
The screen on my chrysler start ghost clicking and its just always clicking things by itself do you think its that same screen on this video that i need to fix it?
Mine works but the screen is forming a bubble of sorts under it. It makes it to where it acts as if I am touching it when im not and basically it fights with me whenever I do attempt to touch anything. I previously looked it up, and before I seen this video I found it was de-laminated. Would this fix the issue?
@@FixiT-Rick Appreciate it. One place was wanting $400 to fix it plus shipping. The dealer would replace the whole thing for $600. I did not want to pay either of those lol
Use the link in the description to go directly to that digitizer screen. From there, Amazon will ask you make and model car you drive and Amazon will confirm if that will fit your vehicle.
This video gave me the courage to do this. BUT! I have a DVD player. And the bottom of the screen and vent covering was screwed into the DVD player. I had to take out the DVD player to get the cover off. I have a 2013 300. I had to call the dealer to get my model radio to make sure I ordered the right one on Amazon. My old cover cracked all over as I tried to get it off. No glue mess. Installed the new one. Put everything back ok. BUT! still does not work and this time. I can control what has buttons but noting on the touch screen works. So the investigation begins. Thanks for the motivation.
Sounds good Ralph! Be sure that the ribbon cable is not loose but all the way in. There may be a little door or flap that holds the ribbon cable in place. I would try those first.
![Repair Your Dodge Uconnect 8.4 Touch Screen [ Digitizer Yourself ] Save Money 💰](http://i.ytimg.com/vi/wb3IgOoiLUw/mqdefault.jpg)
GREAT video! No annoying, ridiculous music. No useless chatter. Just the relevant information presented step by step from beginning to end. Thank you for this.
This is the best "How To" video of this process on UA-cam! No one even close. Thank you
Glad it was helpful!
Will this screen and how to video work with a 2017 Chrysler 300 S???
Dude I accidentally let go at the step on 1:07 and it was a whole b*tch getting the screws back into place. Luckily, I was able to apply the new screen successfully. Thank you for this tutorial.
Thanks for that clear, concise, well presented guide! I'm doing this same job on my 2012 200S, and you covered everything I needed to know.
Thank you Fix iT Rick. I got quoted $800.00 - $1,100.00 to replace the unit. $35.00 - $800..00 = $765.00 in savings! Time and effort after receiving the digitizer took no more than 1 hour. You Da Man! Jesus Christ loves you too sir! But you already knew that! Amen.
Appreciate people like you sir! So awesome to hear. Always good to hear someone remind me of Christ! 🛠️✝️
Great video, getting the glue off was a pain.
Other than that it went pretty smoothly.
You did a really good job on breaking it down to keep it manageable.
How did you remove the glue
Thank you Rick worked like a charm. They wanted to charge me 280.00 to do what you showed us.
Love this!! Awesome.
So just to be clear, I ordered the new screen to fix this, my issue was it not responding to my touch and randomly clicking and glitching stuff! This new screen will fix that correct or is that something in the radio?
Thank You again Fix it Rick, I sent the first one back and put the second one in, in about 20 minutes. And it works. I may have left some protective film on the sides the first time or it was defective. All fixed for about 29 dollars.
Sweet!!! That’s awesome.
What’s the purpose of the glue? I’m having the same issue. Won’t the extended warranty cover it?
Thank you! Had to replace the screen on my 2017 Chrysler 300C. Replaced the display after that when I encountered some issues with areas not responding to my touch. I managed to shake loose the tiny cylinders in the housing which was no fun, but not impossible to get back in place. Display works like a charm now, got it done for under $200.
By the way, that goo they use should be illegal. Spent more time cleaning it off my hands than replacing the screen 😂
Thank you so much. I didn`t need to replace the anything. I imagine most just need to clean the screens, to rid them of all of that gooey glue and replace them. One tip, If I may. Instead of using alcohol, simply apply "peanut butter" to the glue, wait 2 minutes and simply scrape the residue off with a butter or steak knife (with the intentions of not scratching the glass), then dishwashing liquid, then alcohol, or glass cleaner to finish up (that whole process will take minutes, not hours.
Interesting tip, thanks!
Thank you for the great video. I will be performing this procedure when the part comes in. I have a quick question, do I need to disconnect the battery before removing the touch screen equipment? Thanks again!
Sounds like a good idea to me!
My Brother's 300 has the same exact moisture line on the top except his presses all the controls erratically without him even touching the screen. This video is exactly what we needed, thank you so much!
If the black cable came loose where does it go need help asap
If the inside of my radio comes out, is there a video i can use for this? It is a pain and i cant find anything on it
What size is the screen in inches and could it work for a Subaru 8” in a 2019 legacy?
I have an early 2012 Chrysler 300. I bought a 8.4 touch screen of a 2013 and when I plug it in it’s just black. Would replacing the screen be okay ? Any programing ?
I have a 2012 Chrysler 200 with the same issue. Thank you for the video and the link. Im going to try this out.
Any update?
So we replaced it but now im having a dark moon pop up as we start my 300 up? like as if the screen is shattered
Does this work with older models such as 2014? I know the uconnects are different but is it pretty much the same ordeal?
What if your screen is black but the radio still plays. Would I still need a digitizer or just a need radio
If the screen is black, it might be a blown fuse or loose connection.
Is there a difference in quality I see some other company’s want $150-350 for this same piece..
My friend recently told me that her touchscreen is still working to this day!
Hi, my screen touches itself lol. so, this would help? Like i will be listening to music or on a call and my screen hangs up or starts beeping like if I am touching it. You made this look easy!
The digitizers screen needs to be replaced for sure. This was the same problem my friend was having.
Mine dies then same
The video will help you to replace the digitizer yourself. Simple screws, couple plugs, easy peezy lemon squeezy!
Will this work even if my screen went completely black but still functions
If your screen went black but still functions, that’s interesting. I would imagine a fuse went bad…
@@FixiT-Rick I checked my fuses they are good
Did it but it has like little bubbles inside, for now is working fine but i am not sure if its gonna last. i think the hardest part is removing the glue, did it with the razor but it doesnt go that easily
Im guessing this will fix cracked screen as well ? Along with changing stations and flickering on its own. Excellent Presentation on changing it out !!!
If your screen is cracked and changing stations by itself, then yes you're right about changing it out. Thanks for the great comment!
Hello, I'm from Brazil, I have a 300c 2012. my screen cracked. Do you know how to change??? Is there anything else to do or can I follow the video? great content thanks
Maybe my car is older than the one in the video. the back of my screen has different inputs. And here in Brazil it is very difficult to find this type of parts for this car. There are some others that use the same screen but the background colors are different
If the digitizer screen gets replaced, I believe your problem will go away.
Mine is randomly clicking , like touch still works but it still has that seperation that looked similar in this video - is the digitizer starting to seperate the likely culprit of this ?
The digitizer ribbon cable might be loose
Thank you so much I love your ending it encouraged my heart where are you located
Rick, I currently have a 2018 Chrysler 300 and the radio touchscreen is freaking out and changing stations at random. do i need to replace this touch screen or the complete radio? Thanks and God bless
Hey there Paul! You only need to replace the digitizer screen.
@@FixiT-Rick I am having the same issue same year and make of car. This is because the screen has bubbled correct and makes the whole system randomly go from screen to screen or push buttons on its own.
Thank you for the closing. Caught me by surprise. Many blessings upon you. Jesus is Lord!
I broke my chord connected off the casing how does that impact it
Well that would depend. Was it the ribbon cable or a plastic connector?
Will this work for the 2018 300s or just the c model?
Sounds like you want to replace the digitizer screen for a 2018 300s just like the C Model? They might be similar, I don't know for sure. But if it were me, I would try replacing the digitizer. Just make sure to verify through Amazon that the digitizer will fit the 2018 300s.
The screen on my chrysler start ghost clicking and its just always clicking things by itself do you think its that same screen on this video that i need to fix it?
It’s possible that the digitizer screen is bad. Might need to be replaced.
What do you do if the ribbon cable that was notto be touched comes off? Can I secure it back and plug it into it`s slot?
Yes you can! If the touchscreen comes back online, you’ve found the problem. If the touchscreen does not work, then it’s time to replace it.
Mine works but the screen is forming a bubble of sorts under it. It makes it to where it acts as if I am touching it when im not and basically it fights with me whenever I do attempt to touch anything. I previously looked it up, and before I seen this video I found it was de-laminated. Would this fix the issue?
If you replace the digitizer, your touchscreen should work perfectly.
@@FixiT-Rick Appreciate it. One place was wanting $400 to fix it plus shipping. The dealer would replace the whole thing for $600. I did not want to pay either of those lol
Will this help with anti glare coating issues ? I have a 19 300s so anti glare coating is rubbing off in certain areas
Yes. The anti glare coating beginning to disintegrate is an indication the whole digitizer is failing, so it's time to replace it.
How would i get back my controls for heated and vented seat
Can they be controlled from the touchscreen?
would that digitizer work with a 2008 hemi C 5.7L?
No, that model will not work. Here's what I could find that might work for you - amzn.to/43f4QhL
from where i can buy this replacement screen
Touch Screen Replacement - amzn.to/3H9Zv2o
My actual screen is cracked , does the digitizer help with the screen or is that a seperate part that needs to be fixed?
I would remove the digitizer just to see the crack is on the screen. If you find the screen is damaged, the whole thing needs to be replaced.
Will this fit a 2016 c? I can't find any info online about it
Use the link in the description to go directly to that digitizer screen. From there, Amazon will ask you make and model car you drive and Amazon will confirm if that will fit your vehicle.
How
Do I do it
Thanks!!! What if the screen jumps to whatever it wants when on?
You’re welcome! Digitizer screen must be replaced if that happens.
This video gave me the courage to do this. BUT! I have a DVD player. And the bottom of the screen and vent covering was screwed into the DVD player. I had to take out the DVD player to get the cover off. I have a 2013 300. I had to call the dealer to get my model radio to make sure I ordered the right one on Amazon. My old cover cracked all over as I tried to get it off. No glue mess. Installed the new one. Put everything back ok. BUT! still does not work and this time. I can control what has buttons but noting on the touch screen works. So the investigation begins. Thanks for the motivation.
Sorry meant CD player
Sounds good Ralph! Be sure that the ribbon cable is not loose but all the way in. There may be a little door or flap that holds the ribbon cable in place. I would try those first.
God bless you my friend!
Thank you, very good information❤
Mine is 2011 is it same thing?
The link back to the digitizer screen will ask what type of car you have and they will say where or not it’s a match.
What year is you're car ?
She's 2012.
Thank you so much!
I did everything but now my screen doesnt turn on..
I would check all fuses
i did this and it worked perfectly for the screen but now no music will play
Might be a loose connection somewhere behind the screen.
Thanks!
You bet!
But mine crack inside, not the screen. It still works, and I'm afraid it may take a shit soon.😮
As long as the screen still works, I would leave it for now. But the digitizer screen is fairly simple to replace, plus it looks nice and clean.
wow! great job!
Easy peezy lemon squeezy!
Dealerships charge about $5k to do exactly this
This is non responsive. Not non working.
That looks awful. Bad repair. You want to remove all the glue a razor will scratch the display.
He used a razor but he also said you can use Goo Gone, which I did. Followed his steps to the letter and it worked fine.
uconnect must love this shit
Thank you 🙏🏼
🫡🐈