Awesome sauce! I studied your video for a day or two, and with my two adult kids (as assistants, per your advise), I replaced the rods this morning. Did the work in about 30 minutes. We've done three heavy loads and so far, so good! Really grateful for your video...
I saw several different tutorials and while they were decent yours was the easiest to follow along with and has the best recording as I could actually see what you were doing step by step, the tips you also provided, to prevent pulling the wires and keeping track of the screws, just excellent, even though I wore gloves I still somehow nicked the back of my hand had to switch to thicker gloves but that's normal handyman ish't, anyways thank you for being helpful to others when you didn't need to.
Thank you so much, The washer seems to be working well and wouldn't have been possible without this video. Hoping I dont have to repeat this in a few months !!!
This was posted 7 months ago. How is your suspension rod now? I did change mine but after a month, suspension rod issue came back. Anybody else experience this after replacing it?
Great video! I followed your instructions, and the installation went great. Only worked for the first wash and back to the original problem. I believe it's the poor quality of the suspension support rod. Can you please send me a link to a reputable dealer that sells Samsung model WA54R7600AV/US. Replacement suspension support rod. As you had mentioned in the video. Thanks for your response.
We replaced ours with some aftermarket rods that were recommended in another good video. But it was banging around again in no time. And we’ve done the recalibration. In yet another video the guy recommends going with OEM rods. We will try again. Very frustrating. Manufacturer is no help.
@@josebadone83mine didn’t work at all, but saw another video that said all I needed was dampening grease. I did notice original rods had lots of grease and Amazon came with no grease at all
when you replaced the rods, could you tell if the original ones were even broken or needing replacing? just curious before i start my self repair journey! 😂
Your video is wayyyyyyyy more straightforward compared to all of the other videos I had initially come across. THANK YOU.
awesome, glad to help
Thank you! Definitely wasn't easy to do alone - but your step by step guide allowed me to get this done during a lunchtime break.
Awesome sauce! I studied your video for a day or two, and with my two adult kids (as assistants, per your advise), I replaced the rods this morning. Did the work in about 30 minutes. We've done three heavy loads and so far, so good! Really grateful for your video...
Nice!
I saw several different tutorials and while they were decent yours was the easiest to follow along with and has the best recording as I could actually see what you were doing step by step, the tips you also provided, to prevent pulling the wires and keeping track of the screws, just excellent, even though I wore gloves I still somehow nicked the back of my hand had to switch to thicker gloves but that's normal handyman ish't, anyways thank you for being helpful to others when you didn't need to.
I do appreciate the feed back sir 🙏😁
Thank you so much, The washer seems to be working well and wouldn't have been possible without this video. Hoping I dont have to repeat this in a few months !!!
This was posted 7 months ago. How is your suspension rod now?
I did change mine but after a month, suspension rod issue came back.
Anybody else experience this after replacing it?
@@DIYCOMMUNITYHACK same here, I replaced mine and after a month issue came back so I end up buying a new washer
Samsung washer are trash, I'm having the same problem
I replaced mines and now is doing it again after about a month of replacing the shocks, what else can it be?
Great video! I followed your instructions, and the installation went great. Only worked for the first wash and back to the original problem. I believe it's the poor quality of the suspension support rod. Can you please send me a link to a reputable dealer that sells Samsung model WA54R7600AV/US. Replacement suspension support rod. As you had mentioned in the video. Thanks for your response.
I need a chest-mounted phone harness. Where did you get yours?
yep, I replaced mine as well and still bangs... How ever, it maybe that I did not grease the new rods, so buying grease and tryng again...
Did the grease fix the issues?
Thanks a lot I will follow your instructions to change them in my Samsung Washer machine.
Also you want to recalibrate it by holding (delay end) and (temp)
Changed mine and after one load it gave me the error again! I'll try this. Thanks
Hi. Where do you recommend buy parts (suspension rods) from? Thank you.
We replaced ours with some aftermarket rods that were recommended in another good video. But it was banging around again in no time. And we’ve done the recalibration. In yet another video the guy recommends going with OEM rods. We will try again. Very frustrating. Manufacturer is no help.
This video was excellent; replaced the rods but had the same issue within a couple weeks.
I had the same issue any update
I got mine from Amazon and only worked for about 2 weeks . Buying different ones still aftermarket
@@josebadone83mine didn’t work at all, but saw another video that said all I needed was dampening grease. I did notice original rods had lots of grease and Amazon came with no grease at all
when you replaced the rods, could you tell if the original ones were even broken or needing replacing? just curious before i start my self repair journey! 😂
I dont have a way to test the spring strength
Oh man thank you! this saved me a lot of money!
Any idea what the significance of the colors is? Also, how’s your machine holding up 5 months later? Thanks, great video!
It is working fine under light loads, but on heavy loads it's still acting up sometimes.
Where did you get the rods from
Amazon
There are plenty of videos showing how to repair these rods and there’s a product called bounce b gone
Big help!
They don’t make it easy, do they?
Nope
Is this fix the U6 code?
Ub unbalanced load
Now you have a boo-boo no big deal
A scratch, Only a scratch (Mercutio)
replaced rods. still won’t complete spin cycle.
😕
Same , just ordered dampening grease as suggested on another video. Original rods were covered in grease new ones were clean
Would’ve been better without the music
Thanks for the feedback... personally, I watched it without music, and preferred the music 🤔
This doesn't alway fix the issue.