Pulling the baskets first and back flushing the injectors is the best solution to getting them completely clean, throughout the injector. Bravo to you, nearly every one of the other videos I’ve seen has NOT mentioned the filter screen basket removal prior to the back flush. Absolutely a must before you start running them in the normal upright position. They’re still dirty if you didn’t!!!
didn't even realize you could rebuild and clean an injector. that machine would pay for itself after using it one time with the price of injectors. great video
Don't know if you checked, I went back to 2:11- 2:12 there is a view of the basket end of the injector and it looks flush. Cool video, definitely shows how important injector maintenance is and that it is relatively easy to clean and change a few parts. Maybe you could put a vid together showing how to clean them with basic off the shelf and garage items.
Its a good idea to flow test with the new baskets installed, that way if the baskets are incorrect it will show up in the flow test [Happens on KTM motorbikes, where a incorrect basket will cut the fuel flow in half and have you chasing your tail trying to figure out why the bike runs rough].
Hey bro what's your experience with the mineral spirits so far ? The dealer told me to use industrial alcohol because of mineral spirits could damage the internal seals / o rings inside of the machine. What do you think?
Denatured alcohol works great. Mineral spirits are corrosive to the orings and seals of the machine. N-heptane is what professional injection cleaning machines use to get accurate flow rates, but I am not sure if the orings and seals can handle that either.
I dunno, had an injector stick closed, the pintle wouldn't move. Had to slap it against a hard surface to free up the pintle then I proceeded to flush it in both directions. Two years later, that same injector was stuck again.
Самое интересное впереди когда начнется сыпаться передняя панель управления, а сыпаться она будет, по этому Лаунч ими торгует отдельно а на этот аппарат нигде нет, я уже китайцам забил почту письмами, не продают отдельно и всё. Лучше бы добавил денег и купил Лаунч но жадность победила, это я про себя. The most interesting thing is ahead when the front control panel starts to crumble, and it will crumble, so Launch sells them separately and this device is nowhere to be found, I already filled the Chinese mail with letters, they don’t sell them separately and that’s it. It would be better if I added money and bought Launch, but greed won, that's me to myself.
Pulling the baskets first and back flushing the injectors is the best solution to getting them completely clean, throughout the injector. Bravo to you, nearly every one of the other videos I’ve seen has NOT mentioned the filter screen basket removal prior to the back flush. Absolutely a must before you start running them in the normal upright position. They’re still dirty if you didn’t!!!
didn't even realize you could rebuild and clean an injector. that machine would pay for itself after using it one time with the price of injectors. great video
Yeah it’s pretty awesome! Especially as you do more with fuel injection! Thank you 🙏
Cool. I just bought one of these machines off ebay and figured their instructions would be rubbish. Nice tutorial!
Don't know if you checked, I went back to 2:11- 2:12 there is a view of the basket end of the injector and it looks flush. Cool video, definitely shows how important injector maintenance is and that it is relatively easy to clean and change a few parts. Maybe you could put a vid together showing how to clean them with basic off the shelf and garage items.
Solid! I’ll have to double check em lol thank you 🙏
Its a good idea to flow test with the new baskets installed, that way if the baskets are incorrect it will show up in the flow test [Happens on KTM motorbikes, where a incorrect basket will cut the fuel flow in half and have you chasing your tail trying to figure out why the bike runs rough].
grest video very through explination cant wait to see them in action !
Thanks Glenn! Me too!!
@@DickHammhow do you drain the test fluid?
Hey bro what's your experience with the mineral spirits so far ? The dealer told me to use industrial alcohol because of mineral spirits could damage the internal seals / o rings inside of the machine. What do you think?
I see you asked the question on few other videos use industrial alchol I contacted them
Denatured alcohol works great. Mineral spirits are corrosive to the orings and seals of the machine. N-heptane is what professional injection cleaning machines use to get accurate flow rates, but I am not sure if the orings and seals can handle that either.
@@JohnColeman-ul5rj In Australia this is called methylated spirits $5.95 from Bunnings for 1L
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I dunno, had an injector stick closed, the pintle wouldn't move. Had to slap it against a hard surface to free up the pintle then I proceeded to flush it in both directions.
Two years later, that same injector was stuck again.
Hey bro what fluid did you use to clean the injectors??
I’ve used sea foam in the upper sonic cleaner and then just mineral spirits in the lower pressure rail 💪
how was this unit held over the years ?
What liquid you use in the ultrasonic cleaner ?
I’ve been using seafoam it seems to work well
How many times you used this tool does it is good quality
I need one of those .
Heck yeah man, pretty handy thing to have
What liquid do you use to clean the injectors and use to test them ?
I’ve tried both seafoam and mineral spirits! Although they do have proper test fluid for pretty cheap
Have you every had replace the pump in machine if so what pump you use
Its a walbro, you could put a 450 in it
Самое интересное впереди когда начнется сыпаться передняя панель управления, а сыпаться она будет, по этому Лаунч ими торгует отдельно а на этот аппарат нигде нет, я уже китайцам забил почту письмами, не продают отдельно и всё. Лучше бы добавил денег и купил Лаунч но жадность победила, это я про себя.
The most interesting thing is ahead when the front control panel starts to crumble, and it will crumble, so Launch sells them separately and this device is nowhere to be found, I already filled the Chinese mail with letters, they don’t sell them separately and that’s it. It would be better if I added money and bought Launch, but greed won, that's me to myself.
I bough one of these off amazon and it packed in after second vehicle, pile of cheap rubbish
Judging by your comment, you have no idea how to use it.
@@outkast187 when the pump stops pumping fuel mate after its second use, it don't take a smart arse to know its fuk**. so up your's smart arse
Chinese, what did you expect?