Dear gym equipment companies, Ignore coop’s call for fancier packaging. No one wants to spend more money on boxes that are going straight the trash can. Just keep delivering great equipment that shows up with safe and affordable shipping.
@@GarageGymReviews that’s a little condescending, Coop. I know I don’t want to pay 10-15% more for a different box that goes into the trash. Tell me how flashier packaging innovates my gym.
@@thorwannabe6810 Imagine buying a fancy new phone only to get it at delivered with no package, just a bunch of bubble wrap or some shit. Think that for low end stuff it would be acceptable but when you start looking into more premium options it (like these plates) packaging does play a role. Also i doubt that a fancier package would add a significant price to the product.
Wait a sec. I just search it up. Rogue plates cost more in the US than they do in Australia. I think this is the first time I've seen gym equipment cost more in the US than in Australia, holy shit.
Great review, when mentioning the advantages to thin plates, one thing I don't see talked about very often is their usefulness in heavy, loaded bodyweight exercises. If you are very strong on weighted dips or weighted pull-ups and use a traditional belt, thin 45 lb plates are much more convenient to hold in between your legs when you are at 4+. Huge difference.
I recall Henniger saying they wanted to do made in USA calibrated. Seems these would be the mold and they could just bore a hole in the back for plugs.
Does any company make Made in (Country) Calibrated? I know Eleiko isn't made in Sweden and obviously none of Rogue, Vulcan, Hansu, etc are Made in China
Some dude in his basement is still getting stronger with his cap plates than many guys with all the expensive stuff. Your muscles and gravity don't care.
If you've got a full set of bumpers and tend to run out of sleeve length on heavy deadlifts and squats, having a few pairs of these 45s would be a great option for mixing in.
@@TheBitcoinBoomerLate here but probably not. The center where the barbell goes in extends to the lip, meaning that you couldn’t fit the smaller plate within. The center would prevent that.
I work in a box plant, you would not believe the price difference between a box like these and lets saw a double corrugated box with a preprinted image. The price of the paper used could be 50 to 60% more.
8:44 - C’mon Coop! You’re making a freaking video on these plates! You should’ve verified on the Rogue website to see what they specify as the tolerance. (They state +2% / -0%, btw)
Think for the price, if I wanted a thin plate, but one a bit easier to grip and handle, I'd go with the Bells of Steel machined plates. If I wanted a more 'calibrated' experience, I'd just get calibrated
That was fun. Glad to have found the channel. I don't necessarily plan to buy weights anytime soon (as technically, the building my Rabbi owns has a nice gym in the back). However, it's amazing how dense these plates are, and how ACCURATE! Thank you for the video (and the recommendation links)!
Pretty sure I'm buying the deep dish if I ever need more iron plates. But those thin ones look good, very little wasted space which I always wondered why they didn't already do that??
Incredible how many options there are today for types of plates...and to think Ed Coan was setting world records on lb plates they weighed after the meet sometimes!
It really is amazing thinking of all the options. I think you are right, they definitely did not use calibrated plates like today. -Mike, GGR Community Manager.
sure they look nice, Close to calibrated, however its a small sample size. For most people not needed ideal plates for some passive pinch grip training, since alot of people ignore hand/forearm training.
Nice review I need plates that are thinner but heavier like my rubber coated 55 pounds plates take most room but if floor is covered I rather get those thin plates to load more weight on bar . Keep it up !!!!!❤❤
Hmmm depends if you're training for powerlifting. Deep dish plates, especially past 400lbs, is significantly easier. So you want to train how you compete. Other than that l, yeah, deep dish
Heads up to buyers, 6 of my 12 plates came with scratches. Rogue essentially said they will still work, and that they can’t help. Pretty disappointing response them. I’d advise anyone who buys to film yourself opening the plate box.
Hi Rob, it's Eleiko flooring ,here is the link.- Mike, GGR Community Manager. shop.eleiko.com/en-us/equipment/flooring/elt1-000153-qb-eleiko-floor-tile-nordic-night?ref=GY65fxs5WPI12
That is one super-nice thin plate, or until you accidentally drop it on your foot. You can imagine dropping the plate on your foot, when loading/offloading the thin plates before/after squatting. Better safe than sorry, with the Deep Dish, or a Bumper Plate.
I bought these USA Olympic plates, because the deep dish are apparently very loud. These thin plates are still very tinny and noisy. They’re ductile iron, but sound like pure steel. My Iron Grip iron plates are very dull sounding and much quieter. Also, several of these plates arrived very scratched up on the back.
Pro tip - run your entire edited video through a compressor / level limiter before uploading. Intro is WAY louder then the rest of the video. Great review as always Coop!
Did you know that a 17.5 inch plate of 1 inch thick steel with a 2 inch center hole in it weighs 67.3 pounds. And a 17.25 inch plate weights 65.3 pounds. And they can be had from most metal shops, plasma cut or laser cut to size for about 50 dollars each. Also, they aren't cast iron and won't break if you really abuse them.
I think these serve a very specific purpose for those who run out of sleeve length, which is a small group... but aside from that and considering the price, i don't know why anyone would choose those over calibrated plates... i can see those having more cons than pros for everyday home gymmers... (hard to grip, loud, easy to scratch, expensive, and even aesthetically unpleasing when your squat or deadlift weight is average so you end up with a bar and few thin plates looking awkward...etc)
Check out weight it out plates. They are thinner and Claim near calibrated 2oz or less from stated weight. The change plates are awesome for loadable dumbbells.
As a casual workout guy who uses rubber plates, how do you lift these off the ground when they're flat on the floor? Is there enough friction on the side to bring it to a stand?
After training on calibrated kilo plates. Thick plates just don't feel the same. Definitely gonna get a set of these for my home gym!! I just love the thin profile!!
Would you recommend these or The Strength Co plates? With shipping costs the Rogue actually come out just slightly cheaper. Looking to get 2-3 pairs of 45s to supplement bumpers.
I can't decide what to get!. Im still a sub 500lb lifter but I'm about to max out my big fat bumpers. Do you think it would be dangerous to deadlift with these on 3/4 stall mats over a concrete floor ? Also is there any benefits/drawbacks of using for deadlifts vs the deep dish?
Only difference to deep dish is you can fit more of these on the bar. If you’re using big bumpers these thin ones will be a good compliment to add more weight to the bar as they will fit. Stall mats will have no problem with these at all over concrete. Nothing to worry about.
3:31 how can you not love this guy and his vids 👍 Been away from training and the internetz for 3 months, good to be back to all this, good stuff Coop.
It might be a minor difference, but having the weights closer to your body should theoretically create a mechanical advantage and allow you to lift more weight. That might actually be a fun experiment to do if nobody has.
No, physically it's exactly the same. The main practical difference in terms of making a lift easier or harder is that having the weight further on the outsideof the bar makes it bend more, which makes deadlifts easier.
I think the 10 pound would make the loadable DB-15s more attractive. 10 pound are 0.8 inch and the DB-15 have a 6.75 inch sleeve. Minus the 1.5 for the Oso collar, you could get max 120# of plates on there. Pick up pair of 2.5 and 5, you’ve got 5 pound increments from 15 to 135.
Love them, but don't know why they are more expensive than the Deep Dish - same machining, pattern, less milled material. It's cheaper to buy the thinner billet material, and machine less out of it. Though, I guess these are just cast and finished up on the CNC. oh man those 25s are sexy
@@dc2090 yeah, i understand that, they still surface finish the underside and sides. less surface area to machine and less to powdercoat/cerakote. Also, smaller shipping boxes, can ship more at a time if within weight constraints. cost savings all around.
They're more expensive because Rogue knows people will see a shiny new Rogue product and then trip over themselves to spend their money on it. No matter what the product is.
All my weight plates and dumbells I have ever weighed have been less weight by like a lb to lb and a half EXCEPT for my 1980's 25lb weights or my x-mark dumbbells.
I saw on rogue website a 25lb Olympic rogue usa plate pair priced at 148.00 dollars. I am confused that it says 25lb pair on the front, does it mean that for 148.00$ I get 2 plates of 25lb each? I mean will they give me 25lb 1 plate in 148$ or 2 plates?
But if the plates are thin... It doesn't look like I'm lifting as much weight xD. My ego cannot withstand anything other than bumper plates. Makes a 315 deadlift look monstrous.
One thing about these 55lbs is that KG people can buy then because they are 25kg with less than an ounce of diference. So they can use these on mix and mach sets
I think you should do an review on the "SQUAT RACKS CANADA" SRC Classic Machined Steel Weight Plates, or the SRC Onyx Carbon Steel Weight Plates. they claim an 1% tolerance, and they claim to be thinner at .75" compared to the rouge at .89" and theyre also made in Canada
Coop, I purchased a set of these, 6 45lbs and 2 25lb plates. Each one has (to varying degree), what Rogue is calling, hanger marks inside the hubs. The hanger, according to Rogue, is used to hang the plate for coating. Do your USA Olympic plates have these markings or is the entire hub smooth?
That is a normal part of any coating process and after using a plate for any time the coating will wear off the inside hub from taking it on and off the barbell. It's a non-issue.
thanks! been waiting for this review. thinking about these plates over the deep dish. EDIT: ah too bad..was hoping to have a bit more lip for carrying around
@@GarageGymReviews I wish they were more like the old Ivankos. I measured the lip on the inside. It's about 0.75", just enough to grab past the first knuckle
In regards to maxing the weight out, I don't see that really is an issue with most plates. The Rogue Deadlift bar gives over 15" of sleeve, which could hold 5 100# deep dish plates per side (I realize most wouldn't have that many but for argument's sake) which is over 1,000. Or 7 45# per side which is 685 or a combination like 2 100's and 4 45's for over 800. That's enough for most people's deadlift and certainly for other lifts. I know some lifters are stronger and there needs to be room for a collar or a clip but all in all, I think these come down to an argument over aesthetic or price before a legit argument over weight capacity. imo
Coop is the single reason that gym equipment is so expensive these days. He buys all of the equipment AND on all of his reviews he says something like the manufacturer should do something a little better (more expensive)
Call me Goldilocks, but if they made an in-between version I'd be tempted to switch out my old-school milled Yorks. The deep dish are juuuust thick enough where I run out of room on the bar, and these ones are thin enough where I'd have the same handling annoyances I found when I had calibrated plates. Gimme them medium-dish. Oh, or different paint options - people would lose their absolute minds if these came chrome-plated.
Considering they are the exact same price as the calibrated plates I can’t understand why anyone would consider these plates. I like them more than the deep dish but for the price factor I would go with the colorful calibrated plates over the USA Olympic plates every day.
Dear gym equipment companies,
Ignore coop’s call for fancier packaging. No one wants to spend more money on boxes that are going straight the trash can. Just keep delivering great equipment that shows up with safe and affordable shipping.
Exactly it's just a fucking box. As long as it protects the equipment it doesn't matter what it looks like
I tend to think the consumer doesn't know what they want until they receive it. This is how innovation happens.
@@GarageGymReviews that’s a little condescending, Coop. I know I don’t want to pay 10-15% more for a different box that goes into the trash. Tell me how flashier packaging innovates my gym.
@@thorwannabe6810 Imagine buying a fancy new phone only to get it at delivered with no package, just a bunch of bubble wrap or some shit.
Think that for low end stuff it would be acceptable but when you start looking into more premium options it (like these plates) packaging does play a role.
Also i doubt that a fancier package would add a significant price to the product.
@@MrRoflmao1000 weight plates that aren't even calibrated should not be this expensive in the first place
No one’s gonna deny that those are clean but for the price I think it’s better to go with calibrated plates 🤙🏽
Thank you I don't need to to watch the video now
Wait a sec. I just search it up. Rogue plates cost more in the US than they do in Australia. I think this is the first time I've seen gym equipment cost more in the US than in Australia, holy shit.
@@charles8557 Maybe since it's made in china either way so shipping to Aus from China is cheaper?
@@johnwallwizards2 Shipping from China to Australia actually takes much longer than from China to the US which is the weird bit
@@johnwallwizards2 no these are Made in the USA. So it makes less sense. Unless they make the same ones in China for other markets.
I want the packaging to be easier to dispose of. Other than that, I really don't want a ton of waste that comes from a special unboxing experience.
And added cost
Ug the competition kettlebells from Rogue have so much styrofoam to throw away! I wish it was something degradable.
I died when he dropped the 100 plate and said "that can just stay there for the rest of life"
Great review, when mentioning the advantages to thin plates, one thing I don't see talked about very often is their usefulness in heavy, loaded bodyweight exercises. If you are very strong on weighted dips or weighted pull-ups and use a traditional belt, thin 45 lb plates are much more convenient to hold in between your legs when you are at 4+. Huge difference.
this is exactly why I'm looking at these plates
Great input ,especially with a vest that holds these plates
I recall Henniger saying they wanted to do made in USA calibrated. Seems these would be the mold and they could just bore a hole in the back for plugs.
Yep, great call out. These are so dang accurate too. I tested the rest and they were all right in line.
I would buy them if they where actually calibrated. Would also be cool to have them in KG sets.
it it wont take much to make a calibrated version of these
Does any company make Made in (Country) Calibrated? I know Eleiko isn't made in Sweden and obviously none of Rogue, Vulcan, Hansu, etc are Made in China
@@johnwallwizards2 maybe leoko.
And challenge is Pakistani, and is made there i belive
Some dude in his basement is still getting stronger with his cap plates than many guys with all the expensive stuff. Your muscles and gravity don't care.
Weight is weight. Majority of my training has been done with rusty old prison yard shit basically. Works all the damn same.
@@oof578 same here my brother
Gravity is a myth. It’s all about density!
@@Isaiah-ft5nx no it isn't. Why do satellites orbit if it's all about density?
@@randybobandy9828 how do you know they orbit? Can you prove that?
If you've got a full set of bumpers and tend to run out of sleeve length on heavy deadlifts and squats, having a few pairs of these 45s would be a great option for mixing in.
Not a problem for me. I'm too weak anyways
Absolutely, that is why I'm ordered a set. It's annoying to have to strap plates on to keep them on while deadlifting. - Mike, GGR Community Manager
You can get about 585 on the bar with bumper plates. 99.9% of people in the gym are not lifting that
I was wondering if one of the 25 or 35 lbs slims would fit inside the deep dish.
If you could stack two deep dish 45s, each with a 35 lbs slim inside.
@@TheBitcoinBoomerLate here but probably not. The center where the barbell goes in extends to the lip, meaning that you couldn’t fit the smaller plate within. The center would prevent that.
I work in a box plant, you would not believe the price difference between a box like these and lets saw a double corrugated box with a preprinted image. The price of the paper used could be 50 to 60% more.
The antithesis of fake plates, my ego couldn’t handle them 🙈
if ya using pounds ya ego is intact since the number is higher than real measurements lol
@@girlsdrinkfeck not if you measure in grams 😎
@@Alex-lc1bv I measure strictly in grains.
@@adamkunkel yeah well I measure in milligrams.
8:44 - C’mon Coop! You’re making a freaking video on these plates! You should’ve verified on the Rogue website to see what they specify as the tolerance. (They state +2% / -0%, btw)
I love this dudes content. It's like gym advice and gym gear reviews from a chill dad who can lift cars
*Petition for Agrro Bar review!!!!!! ASAP!*
Think for the price, if I wanted a thin plate, but one a bit easier to grip and handle, I'd go with the Bells of Steel machined plates. If I wanted a more 'calibrated' experience, I'd just get calibrated
AGGRO Bar review PLEEEEASE!!!
Coop is the man!
"no edge to grab" coop hasnt met the face of a 25kg eleiko comp steel plate on the floor
I think since I dont max out the bar, I would prefer the deep dish
At least for the 20Kg
These look so sleek and smooth, I wouldn't even wanna workout with these, probably would've framed these and stared at them forever.
I have 2x55lbs, 6x45lbs and 2x25lbs. They are currently my fav plates. Go for it people, you won't regret!
Would be great to see these on the rogue dumbbell handles and see how it compares to usual thickness of cast iron plates. Another great video, Coop
I'm in love with this gym plates 😍❤
They are sweet, I could not believe how thin they really were. -Mike, GGR Community Manager
That was fun. Glad to have found the channel. I don't necessarily plan to buy weights anytime soon (as technically, the building my Rabbi owns has a nice gym in the back). However, it's amazing how dense these plates are, and how ACCURATE! Thank you for the video (and the recommendation links)!
Need a review on the AGGRO Ohio power bar man
YES. Just saw them in new segment and got horny for that knurling already...
Been training with these for a few weeks now and love them!
Never have been too picky with plates, tolerances are the only thing I look for
And the only affordable ones right now are 3%
Pretty sure I'm buying the deep dish if I ever need more iron plates.
But those thin ones look good, very little wasted space which I always wondered why they didn't already do that??
It wouldn’t visually look impressive if someone benched 2 plates with these thin ones
What is the benefit of the deep dish plates?
@@Sloimer Mainly handling. They’re easier to grip and move around
Incredible how many options there are today for types of plates...and to think Ed Coan was setting world records on lb plates they weighed after the meet sometimes!
It really is amazing thinking of all the options. I think you are right, they definitely did not use calibrated plates like today. -Mike, GGR Community Manager.
If anyone wants to send me their old plates, I'll gladly accept them :)
sure they look nice, Close to calibrated, however its a small sample size. For most people not needed ideal plates for some passive pinch grip training, since alot of people ignore hand/forearm training.
Please do an updated gym tour
There will be one coming soon. -Mike, GGR Community Manager
They look nice, but other than for aesthetics it would make more sense to get calibrated plates.
I like the deep dish because it looks like I'm lifting more weight than I'm actually lifting. 😃 I would buy them. Good video. 👍🏻😎
I want Rogue's Standard 45 plates be to made here. Like I think those are the most beautiful plates but I want em made here
Nice review I need plates that are thinner but heavier like my rubber coated 55 pounds plates take most room but if floor is covered I rather get those thin plates to load more weight on bar . Keep it up !!!!!❤❤
Unless you're deadlifting 800 pounds plus, I think the deep dish are the best choice for most people.
Again great review!
Hmmm depends if you're training for powerlifting. Deep dish plates, especially past 400lbs, is significantly easier. So you want to train how you compete.
Other than that l, yeah, deep dish
Coop: I’m so use to holding thick things
Me: PAUSE!!!!!!!
Heads up to buyers, 6 of my 12 plates came with scratches. Rogue essentially said they will still work, and that they can’t help. Pretty disappointing response them. I’d advise anyone who buys to film yourself opening the plate box.
Hi Coop, Great Review as always. I noticed the new flooring. Can you give us a link or review?
Hi Rob, it's Eleiko flooring ,here is the link.- Mike, GGR Community Manager.
shop.eleiko.com/en-us/equipment/flooring/elt1-000153-qb-eleiko-floor-tile-nordic-night?ref=GY65fxs5WPI12
That is one super-nice thin plate, or until you accidentally drop it on your foot. You can imagine dropping the plate on your foot, when loading/offloading the thin plates before/after squatting. Better safe than sorry, with the Deep Dish, or a Bumper Plate.
I bought these USA Olympic plates, because the deep dish are apparently very loud. These thin plates are still very tinny and noisy. They’re ductile iron, but sound like pure steel. My Iron Grip iron plates are very dull sounding and much quieter. Also, several of these plates arrived very scratched up on the back.
Pro tip - run your entire edited video through a compressor / level limiter before uploading. Intro is WAY louder then the rest of the video. Great review as always Coop!
Did you know that a 17.5 inch plate of 1 inch thick steel with a 2 inch center hole in it weighs 67.3 pounds. And a 17.25 inch plate weights 65.3 pounds. And they can be had from most metal shops, plasma cut or laser cut to size for about 50 dollars each. Also, they aren't cast iron and won't break if you really abuse them.
I want these just because I feel like my grip strength will naturally improve significantly from loading these all of the time.
I think these serve a very specific purpose for those who run out of sleeve length, which is a small group... but aside from that and considering the price, i don't know why anyone would choose those over calibrated plates... i can see those having more cons than pros for everyday home gymmers... (hard to grip, loud, easy to scratch, expensive, and even aesthetically unpleasing when your squat or deadlift weight is average so you end up with a bar and few thin plates looking awkward...etc)
These would be great for a reverse hyper of loadable lat pull down if you’re going mad heavy.
Check out weight it out plates. They are thinner and Claim near calibrated 2oz or less from stated weight. The change plates are awesome for loadable dumbbells.
These plates would be an awesome combo with the kensui ez vest‼️ 👌
Setting them next to each other really shows how exactly the same the finishing process is
As a casual workout guy who uses rubber plates, how do you lift these off the ground when they're flat on the floor? Is there enough friction on the side to bring it to a stand?
Keep a flathead screwdriver around.
Are the 45's a noticeably bigger pain to handle than your typical 45lb plate due to the extreme thinness?
Speaking of thin plates, I really hope to see a video of the Weigh It Out plates.
Any possibility of seeing this review Coop?
How hard are they to handle compared to normal 45s? Not sure if gripping will be more of a chore with these or not, especially in tight spaces.
After training on calibrated kilo plates. Thick plates just don't feel the same. Definitely gonna get a set of these for my home gym!! I just love the thin profile!!
I agree the thin profiled feels different and allows to load more weight on the plate.- Mike, GGR Community Manager.
I would never max out a barbell with any style of weight plate because i’m just that weak… but I DO want those thin style plates now XD
Me too 👍
Can you do CLMBR review? It looks like a great concept.
Always thought the deep dish looked really tacky so I like these a lot more.
As nice as those are, I really really want those deep dish plates! Seriously considering selling all my Titan Fitness bumper plates to get them!
Would you recommend these or The Strength Co plates? With shipping costs the Rogue actually come out just slightly cheaper. Looking to get 2-3 pairs of 45s to supplement bumpers.
The 45 lb plate looks about the thickness of the 25 kg calibrated plate from Hansu. Their plates are double boxed for shipping.
I can't decide what to get!. Im still a sub 500lb lifter but I'm about to max out my big fat bumpers. Do you think it would be dangerous to deadlift with these on 3/4 stall mats over a concrete floor ? Also is there any benefits/drawbacks of using for deadlifts vs the deep dish?
Only difference to deep dish is you can fit more of these on the bar. If you’re using big bumpers these thin ones will be a good compliment to add more weight to the bar as they will fit.
Stall mats will have no problem with these at all over concrete. Nothing to worry about.
@@dbsasuke thanks for the info. I appreciate it
3:31 how can you not love this guy and his vids 👍
Been away from training and the internetz for 3 months, good to be back to all this, good stuff Coop.
I have the old York deep dish plates with the machined backs. Such a neat plate
I’d love to see these compared to Weight It Out they’re also USA made and claim to be the thinnest on the market
It might be a minor difference, but having the weights closer to your body should theoretically create a mechanical advantage and allow you to lift more weight. That might actually be a fun experiment to do if nobody has.
No, physically it's exactly the same. The main practical difference in terms of making a lift easier or harder is that having the weight further on the outsideof the bar makes it bend more, which makes deadlifts easier.
I believe theres been experiments where test subjects lifted more if the weight appeared smaller. So bumpers “felt” heavier than regular plates.
I think the 10 pound would make the loadable DB-15s more attractive. 10 pound are 0.8 inch and the DB-15 have a 6.75 inch sleeve. Minus the 1.5 for the Oso collar, you could get max 120# of plates on there. Pick up pair of 2.5 and 5, you’ve got 5 pound increments from 15 to 135.
Love them, but don't know why they are more expensive than the Deep Dish - same machining, pattern, less milled material. It's cheaper to buy the thinner billet material, and machine less out of it. Though, I guess these are just cast and finished up on the CNC.
oh man those 25s are sexy
pretty certain they're cast, then machined, not completely machined from a solid chunk of billet.
@@dc2090 yeah, i understand that, they still surface finish the underside and sides. less surface area to machine and less to powdercoat/cerakote. Also, smaller shipping boxes, can ship more at a time if within weight constraints. cost savings all around.
I totally agree. Makes no sense why more expensive. Cast is also cheaper than maching from a solid piece
They're more expensive because Rogue knows people will see a shiny new Rogue product and then trip over themselves to spend their money on it. No matter what the product is.
When you think someone brings you a pizza box but it's an olympic plate :(
They would be a good choice if you have a Thruster bar which has a short sleeve. Then you can load more weight for deadlifts.
They kept the spokes on the 25s like StrengthCo. But theirs are also on the 10s too
All my weight plates and dumbells I have ever weighed have been less weight by like a lb to lb and a half EXCEPT for my 1980's 25lb weights or my x-mark dumbbells.
I saw on rogue website a 25lb Olympic rogue usa plate pair priced at 148.00 dollars. I am confused that it says 25lb pair on the front, does it mean that for 148.00$ I get 2 plates of 25lb each? I mean will they give me 25lb 1 plate in 148$ or 2 plates?
But if the plates are thin... It doesn't look like I'm lifting as much weight xD. My ego cannot withstand anything other than bumper plates. Makes a 315 deadlift look monstrous.
One thing about these 55lbs is that KG people can buy then because they are 25kg with less than an ounce of diference. So they can use these on mix and mach sets
I think you should do an review on the "SQUAT RACKS CANADA" SRC Classic Machined Steel Weight Plates, or the SRC Onyx Carbon Steel Weight Plates. they claim an 1% tolerance, and they claim to be thinner at .75" compared to the rouge at .89" and theyre also made in Canada
Coop, I purchased a set of these, 6 45lbs and 2 25lb plates. Each one has (to varying degree), what Rogue is calling, hanger marks inside the hubs. The hanger, according to Rogue, is used to hang the plate for coating. Do your USA Olympic plates have these markings or is the entire hub smooth?
That is a normal part of any coating process and after using a plate for any time the coating will wear off the inside hub from taking it on and off the barbell. It's a non-issue.
@garage gym reviews how has it been handling the plates now that’s you’ve had them for a while?
The 10lb plates are perfect for loadable dumbells
Yes, those were my exact thoughts when he unboxed them.- Mike, GGR Community Manager
And what do you think tech is boxed in...cardboard no foam half the time
thanks! been waiting for this review. thinking about these plates over the deep dish. EDIT: ah too bad..was hoping to have a bit more lip for carrying around
For me personally I want these over deep dish to make sure I can get the weight on the bar going heavy.- Mike, GGR Community Manager
@@GarageGymReviews I wish they were more like the old Ivankos. I measured the lip on the inside. It's about 0.75", just enough to grab past the first knuckle
Can you say outside diameter of the 25lbs plate ? 6:30
Thanks!
In regards to maxing the weight out, I don't see that really is an issue with most plates. The Rogue Deadlift bar gives over 15" of sleeve, which could hold 5 100# deep dish plates per side (I realize most wouldn't have that many but for argument's sake) which is over 1,000. Or 7 45# per side which is 685 or a combination like 2 100's and 4 45's for over 800. That's enough for most people's deadlift and certainly for other lifts. I know some lifters are stronger and there needs to be room for a collar or a clip but all in all, I think these come down to an argument over aesthetic or price before a legit argument over weight capacity. imo
I would love to see you review Watson pro Olympic plates
Different weight size thickness might have something to do with being able to fit standard weight rack spacing.
It's crazy that my calibrated plates are thinner. The rogue ones do have a nice look
Coop is the single reason that gym equipment is so expensive these days. He buys all of the equipment AND on all of his reviews he says something like the manufacturer should do something a little better (more expensive)
I am shocked Coop!!! An American measuring the plate thickness in the heathen metric system 😳
great for the kensui vest
How's the battery life?
Can we get some wider plates, maybe even plates are made to look like two plates stacked and hollow inside. So we all look stronger lol
Similar to Weight It Out Plates with the thinness, but Iron vs. Steel.
Could u review the strength shop cast iron plates. Please
Dang I want these! And it would make my home gym smell like less of a tire factory versus all the bumper plates I have lol
I’ve never been one for having to have the highest of quality rogue, but damn that’s a pretty plate
They really are some pretty sweet plates- Mike, GGR Community Manager
coops do an review on the cheap adjustable bench in amazon there's a lot in there
I got lucky a few months ago and got KG calibrated plates on Rogue for about $200 for a pair of 25kgs but I really want t hose deep dish plates
Call me Goldilocks, but if they made an in-between version I'd be tempted to switch out my old-school milled Yorks. The deep dish are juuuust thick enough where I run out of room on the bar, and these ones are thin enough where I'd have the same handling annoyances I found when I had calibrated plates. Gimme them medium-dish.
Oh, or different paint options - people would lose their absolute minds if these came chrome-plated.
they should make tungsten plates because they’re so dense the plates would be smaller
Considering they are the exact same price as the calibrated plates I can’t understand why anyone would consider these plates. I like them more than the deep dish but for the price factor I would go with the colorful calibrated plates over the USA Olympic plates every day.
If they are half price why not lol, just grabbed 6 plates in thier boneyard section for half off😳😳
Thank coop for 4k videos
Nice calipers Coop!
Makes a cleaner cut if you drop it on your toes.