Replacing Spider Gears in Rear Differential
Вставка
- Опубліковано 12 вер 2024
- Replacing Spider Gears in Rear Differential in 03 C1500
#bennettshotrods #SpiderGears #Yukongears
Thanks for watching! Like and Subscribe if you like what you see! You can also check out Bennett's Hot Rods latest projects and photos by clicking on the links below...
Facebook: / bennettshotrods
Instagram: @bennettshotrods
Website: gigiautomatic....
The only part people really need to see is the spider gear placement haha.
Matt's daughter is a lucky girl. Not only did her father stress test the 3rd member of the truck finding the weakness thus preventing HER from breaking down somewhere and getting stranded, he fixed it too.
Thanks for the video...just finished my axle bearing. You made it easier than other videos I've watched
wtf you skipped the most important part, putting in the spider gears. Problay to save embarrassment fighting to get them in. But wtf was the point of the video then???
I wish you had shown how to install the spider gears.
Hi Jim, UTG sent me here. Looking forward to watching your videos
Peace from Canada
Thanks for coming
I know the feeling. My 17 year old daughter is driving my CLK350 Cabrio.
Matt did an awesome job of fixing this differential. The only thing I miss is the story how it got broken in the first place. Also, I bet Austin was hoping to see Matt’s daughter again….
A little to much throttle lol
@@matthewboyd3621 It happens to the best of us. You fixed it so that’s all the counts for you’re daughter 👍
I almost choked to death on white castle when he pushed in that axle I thought your hand was done.
Especially with the spider gears
Happy Thanksgiving Jim and the whole Bennet hot Rod family
my chev 2000 Silverado is making noise and going to try to fix it thank you for explaining
Best rear diff video on youtube. Tackling my 3.73 tonight. Good work fellas.
Thank you, you made look like i can do it myself very good,,I'm going to try it
Matt - I thought for sure you were gonna have some swelt up fingers when that axle came ramming down that tube. 😳
Mighty fine job sr 👍
Gear oil is one of my favorite smells.
Fucking disgusting
I really learned thank you for your time and video
You should have installed a limited slip. So it doesn't get stuck in a mud puddle. VERN.
not really necessary when youre putting your 17 yo daughter in it
I'm glad I'm not the only one who dirty talks my truck,when I'm working on it. Lmfao good shit brother. Definitely gave me the confidence I needed to do this on my 09 silverado.
My thrust washers won't go back in. With the spider gears. Have tried everything to get them back in. On the back of them.
How do you get the shims to stay in place with the little spider gears
The gear oil makes the shim stick to the gears
I just replaced my bearings and seals in a Hummer H2 and the spider gears fell out. It was very frustrating getting them back in. They also had a wear ring that kept falling off too.
Im a bit confused. My spider ears fell out. So I did put them back in, and of course they are lined up with the pin, and the retaining screw is in there, but I cannot get the axles to turn, they're just always moving free, no matter that the drive shaft is doing. Are there particular gears the spider gears need to ride on or what??
What, has been done, to the truck? Why, does the rear differential, keep breaking?
because he beats it like a red headed step-child
Yee Haw!!!!
When putting the gears back in do you put the axles in?
should take about 5 minutes to put the spider gears back in. center everything, then drop one in from the top and slap the other one up with your right hand, now rotate the drive shaft with your left hand untill they line up with pin
I didn't see the key part, the two small gears, how you insert it in?
Arthur Morgan you saved the day
I have the same situation going on but i have a posi trac If my spider gears are bad does that make the whole unit bad?
One wheel peel
16 yr old girl don't need to get sidways
Question: What is the purpose of the "crush sleeve"?
sounds good
To much power ? Old gear oil ?
If you had a Ford nine-inch, you could have done this on the bench and not on your back under the car. If you had a Dana 60, it wouldn’t have broken at all.
its for a 17 yo girl. she doesnt need bulletproof
@@bennettshotrodgarageclassi7068 Tell that to my late sister. Between the time she turned 16 until I did four years later she blew out four transmissions in our 1957 Chrysler New Yorker.
Key word Chrysler not chevy Bubba big difference lol
My fu_king spider gears both came out while I was doing this and I can not get them back in for the life of me. Fudge nuggets!
Too much throttle, or you another victim of poorly made / machined parts?
Merry Christmas to Jim and the whole garage! Keep being honest, it's a wonderful sight to see!
Nice dad
Sorry, but putting in the spider gear, is what I watched to see how it was done. You cut that important part out. Making your video useless.
you didn't show in your video how you were able to install the 2 small spider gears : [
If you finagle one up top and hold it in place over the axle gears you can smack the hell out of the bottom one and it will pop in place as long as it’s all lined up. Then just rotate the whole thing enough til she’s in place and bolt her down. You ain’t gonna cause enough damage to these gears by manhandling them, don’t be afraid to give ‘em a solid whack or two. Don’t go crazy and grab a deadblow or anything but a firm palm heel strike will do you
Why you even put this video on UA-cam you left out the part you label the video for big thumbs down
The camera has legs and groans
You guys don't order cases of brake cleaner pb blaster etc shit order it online half price and never run out.
why is it nobody ever actually shows you how to get the spider gears in every video I seen on this they dont show how the actual gears go in it sucks!
Dude cut out the main part of installing the gears
The part I need to see you cámara guy skip that.
😁👍👌🖖✌😎
Bro put in a 410 gear ⚙ in ur truck will save u money and time in the long hall
Holly fck these comments 🤢🤢🤢
Should have just swapped to limited slip
It was factory limited slip but I don't need my 16 yr old daughter getting loose in this bad ass Chevrolet
auto zone gears lmao
they were yukon gears. Autozone only makes floor mats
Doing it all wrong
This is the worst video I have ever seen. No help at all. The camera person totally missed the parts I needed to see. So much for time I will never get back.