6 speed auto Swapped Ba Falcon
Вставка
- Опубліковано 21 гру 2024
- He’s my 2003 Ba xr6 Falcon That I’ve Swapped A 6 Speed Auto out of a Bf falcon into
I’ve taken all the wiring harness,computers,engine,transmission and interior out of a Dereg Bf Falcon But if you are looking to do this swap I think the only things you have to Do
here's a list of what U would have to change as part of the upgrade:
ZF 6 speed trans
trans cooler stock or aftermarket
BF Diff
Bf Drive Shaft With ba Centre Bearing
Complete engine and trans harness and complete body harness
Addition of 1 Knock Sensor
Addition of 1 O2 sensor
Bf exhaust for extra O2 sensor or weld a bung on
ABS unit
All the brake lines will need to be changed to bf ones
BF Master Brake cylinder
Change transducer for Power Steering
All bf Computers and Ecu
Bf Instrument cluster
Steering column with BF ignition lock
Door barrel
Glovebox lock and handle
BF Alternator + rear bracket
But you would be better off doing what I did and buy a damaged Bf Falcon which I was lucky to find one for cheap.
Now that’s done I’m going To Be put a Turbo on it
So it’ll be a 2003 BA+F XR6+T Falcon.
Nice parts list, since I already own a BF XR6 MKII 4spd auto looking to upgrade to the 6spd I already have most of these parts.. May have to look into this further
Definitely worth it if you’re looking for something to handle more power or even to just get up and go as is the 4 speeds have a long first gear and a bit weak so they’ll break if your beat on it too much
Wanting to do this to my BA. How much did all this cost?
I bought a Dereg bf xr6 for 1.9k but after replacing a few bushes and doing a few things to the motor I think I was in about 3.5-4K
@@Markking07 ah yeah
Leave the ba diffs as they mostly had 3.23 or 3.45 and zfs use a 2.73 so your instantly doing diff gears if you don’t change it
ba = 3.08...
bf = 3.23
@@f4lcon-life487nice try unfortuantly all ba came with atleast 323 and some optioned with 345 “high pref” or 346 lsd
@@Gazzader lmfao I'm guessing you get all your infomation from google 😂try bending your back nexttime an look at the diff sticker on a ba xt, iv owned 10+ B series falcons so "nice try" 😂
@@f4lcon-life487 unfortuantly I’m a master tech at ford brother and been thru more falcons anyone should ever own 🤣
@@f4lcon-life487 hell I’m in a ba right now with 323s so no issues can prove it to u
Can fg zf6 transmission hook straight on a BA falcon, take btr 4sp out and put in fg zf6
It’ll bolt on no problem getting the car to work is another thing I just swapped everything over from a wreaked bf falcon like wire harness for the whole car and changed the rear subframe and drive shaft (just have to use a ba Centre bearing on the bf drive shaft) I swapped literally everything over but you should be fine with just swapping out everything in the front of the car (dashboard forward)
Nice work was thinking of swapping a zf6 into my ba turbo. How did the dash and icc go with the bf ecu and loom ? Or did you swap all that as well ?
Thanks for the video 👍
I swapped literally everything over but I’d say you wouldn’t need to do as much as I did the only wiring harness bits I think you should need is just the interior drivers side wiring harness just for the different shifter and just engine and transmission harness.
Awesome work! Any mods required underneath the transmission tunnel to fit the trans as I've heard that the BF is higher?
Na transmission Tunnel is fine just for the driveshaft the Centre bearing mounts are different where the centre bearing bolts to the body is different so you have to put a BA centre bearing on the BF driveshaft to make that work
@Mark King I assume you haven't got DSC. Hence, not added a SAS yaw steering sensor?
I took all the wiring harness and computers etc from a Dereg 2006 Xr6 Bf Falcon so whatever that had I have have now
Nice