So true, sometimes the engineering isn't always very thought out it seems. Fortunately I've never had any cooling issues on my LLY! Thank you for watching!
Man, that's a good lookin LLY/DM. I bet if you run the wipers and turn the key off when they are fully extended, it'd be much easier to change out the blades.
As someone who owns a GMT900(07.5-14) extended cab truck, I can say they do, in fact, have rear door pockets. I can't remember if the crew cabs did though
Your water separator /fuel filter on stock engine don't need a lift pump.. there's a rebuild kit for it.. that plastic stock screw and water drain/sensor is a problem first.. and you can just replace the assembly housing after you wear it out from priming it so much, then it should be good for many years afterwards replacement brother
@@605LIFE thank you! Definetly thinking about doing this, or putting light strips in, not sure at the moment! I wonder if they have those holes for the lights in the rear seats on the crew cab
Yes but only when certain conditions are met like temperature and it only works for one engine high idle speed. This upgrade gives full governance and a choice of 2 engine high idle speeds for maintaining oil pressure, voltage, etc. for the job. Anyways, thanks for watching!
Thank you!! I pretty much wipe it all down by hand and apply some stuff called PRIMO interior/exterior dressing, it's water based so it's safe for engine bay and smells like cherries haha. I haven't had any issues using tire shine before though too if you're in a pinch.
Unfortunately not, but if you do, dental floss, a hair dryer (or heat gun), and a 3M eraser wheel are your best friends!! Then just a good polish and wax! Thanks for watching!
It was an interesting choice by gm to put the smallest radiator with the largest turbo
So true, sometimes the engineering isn't always very thought out it seems. Fortunately I've never had any cooling issues on my LLY! Thank you for watching!
Man, that's a good lookin LLY/DM. I bet if you run the wipers and turn the key off when they are fully extended, it'd be much easier to change out the blades.
I'm an idiot, that's a great idea! Can't believe I've never done that. Thanks for watching!!
I’ve got a 2004.5 gmc cclb. I love my pickup too. I enjoy your videos. Thanks.
I love CCLB trucks!! Thanks for watching!
BEAUTY. I HAVE A 2007 CLASSIC LBZ - SPORT RED.
Thanks for watching! Keep on truckin'!
These are very solid engines!
I agree! Thank you for watching!
Nice review. Ftr, the new L5P DOES have a lift pump…and Denso HPFP, instead of Bosch.
Never knew the L5P had a lift pump - good to know! Thanks for watching and I appreciate the comment!
She looking good! Paint looks perfect so I know you’ve kept up with meguiars paste wax! That’s good stuff! Lol keep on truckin’
Dude what's up?! Haha thanks, and you know it with the paste wax! Thanks for watching! Hope all is well.
Love that color
Thanks, at first I wished it were pure black/white but I've fallen in love with how the flakes in the paint shine !!
As someone who owns a GMT900(07.5-14) extended cab truck, I can say they do, in fact, have rear door pockets. I can't remember if the crew cabs did though
Oh good point! I totally forgot about those! Thanks for watching!
Your water separator /fuel filter on
stock engine don't need a lift pump..
there's a
rebuild kit for it.. that plastic stock screw and water drain/sensor is a problem first.. and you can just replace the assembly housing after you wear it out from priming it so much, then it should be good for many years afterwards replacement brother
Good to know since I still don't have a lift pump! I just use AC delco fuel filter for now. Thanks for watching!
if you turn on the wipers and shit off the truck the wipers will stay up and allow you to change them
Wow I've actually never thought of that lol! Thanks for watching!
cat eye :)
You're awesome!! Thanks!
Nice truck, would look better sitting on my driveway
How did you do the foot well lights? Thanks!
Here is my install video for the foot well LEDs! Thanks for watching!
ua-cam.com/video/uRHHUlhqLbg/v-deo.html
@@605LIFE thank you! Definetly thinking about doing this, or putting light strips in, not sure at the moment! I wonder if they have those holes for the lights in the rear seats on the crew cab
you have steering wheel controls. You have high idle without a switch.
Yes but only when certain conditions are met like temperature and it only works for one engine high idle speed. This upgrade gives full governance and a choice of 2 engine high idle speeds for maintaining oil pressure, voltage, etc. for the job. Anyways, thanks for watching!
Smokin truck. How did you get the engine bay soo clean?
Thank you!! I pretty much wipe it all down by hand and apply some stuff called PRIMO interior/exterior dressing, it's water based so it's safe for engine bay and smells like cherries haha. I haven't had any issues using tire shine before though too if you're in a pinch.
Did you make a video on how you removed the door trim?
Unfortunately not, but if you do, dental floss, a hair dryer (or heat gun), and a 3M eraser wheel are your best friends!! Then just a good polish and wax! Thanks for watching!
@@605LIFE thank you
Cateye
Thank you for watching!!
Cateye.
Dont waste your time listening to this guy whine about insignificant things
Haha insignificant is right! This is an amazing truck. Just putting it all out there. Thanks for watching!
Cateye
You're the best! Thank you!!
@@605LIFE anytime!