Kawasaki Ninja ZX-6R / Chain Tension Adjustment / No Stands Needed
Вставка
- Опубліковано 19 чер 2024
- Start to finish process of how to adjust the chain on your motorcycle to the proper factory spec. Chains will need periodical adjusting to take the slack out of them, it's something you should check before every ride. This item of maintenance is super easy and should not be put off. The only tools you will need are a ratchet, a 32mm socket for the axle nut, two 12mm wrenches, and a needle nose pliers helps with the pin. Clean and lube the chain on your bike as well if needed. Comment with any questions, enjoy!
- Affiliate Links -
Muffler - amzn.to/3Tp2SqW
Link Pipe - ebay.us/XMNrPq
Tail Tidy Fender Eliminator $37 - amzn.to/3PQybdt
32mm Socket - amzn.to/4c6I0wP
Chain Lube - amzn.to/4ezsgny
Chain Cleaning Brush - amzn.to/3RCRyHI
This process applies to 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Man thanks for these videos. I just bought a 24’ 636 and you’re literally the only person doing how-to videos of this bike
Awesome man, happy to help! I'm sure there will be more as I keep working on things 👍
I just wanted to say thank you for making these zx6 2024 videos. They are super educational and provide a clear and easy way to learn, and keep the bike maintained. I love them. Keep them coming man. Take care
Absolutely. I just purchased one a few weeks ago and have used all your videos!!
Thanks guys! I'll keep rolling em out 👍
Thanks bro this helped me out just did my 2024 watching this and it worked out perfect 👍
Thanks for doing all these vids on the 24’ zx6r not many people are doing them yet and all the videos you have posted have been helpful and informative!
No problem, thanks man!
Yeah dawg thanks for doing these videos on the 24 model, your like the only one with clear information
i have the exact same bike so these videos save my ass consistently, cause im bad at mechanic things. thank you so much man!
Awesome, thanks man!
great job as always; keep 'em ZX-6R videos coming mate!
Thanks man, will do!
I was looking if I have the same notches in my R15 but found none hahaha too bad for me, but watching this made me feel I can do it alone as you have shown! Thanks man
Yes sir! 👍
Definitely have to tighten my chain after every wheelie practice session. Getting better with my clutch up now that i got ASV shorty levers. Still buidling the courage to practice the staggered wheelie. Sit down and stand ups are getting easier. Just working on constancy
Heck yeah man, it's an art that takes perfecting, and you will perfect it 👍
can you please do a video on how to remove the fairings I need to replace the headlight frame
Agreed. I need to replace my side fairings, and I don't see any videos on removing fairings.
Your chain will have tight spots, you need to find the tightest spot on the chain, measure and adjust from there
I love all these vids, especially since I have the same exact bike haha
Very helpful!
It's just unfortunate that the '24 ZX-6R doesn't come with many tools under the seat as previous generations. I had a '17 ZX-6R before and it had all the tools to take off the rear wheel
Yeah I know. I always like to see a toolkit with all the basics. Aw well, at least the bike is awesome lol 👍
just hit my first 1k💪
How’s that Moore Mafia ECU flash holding up
It's been more than fun. Bikes has ran perfectly, zero issues of any sort
Anyone know how to turn off traction control on the 24 Zx6r ? I can’t find it anywhere
Go to "rider" mode and then you can set the power to full and traction control off
Can you do a throttle play adjustment video?
Yes! Good idea, I'll roll that out soon 👍
@@bikesandbangs hell yeah you’re the man!
Your throttle adjustment video is out! ua-cam.com/video/nbXVVDSDXS4/v-deo.html
@@bikesandbangs I just watched! Thanks man I’m gonna do it now!
Why is your axle nut with the Carter pin on the exhaust side? Does it matter at all? Because mine came straight from the dealership with the axle nut on the chain and sprocket side.
Yours is backwards, the tech at the dealership must've put the axle bolt in the wrong way. Idk if it will make a difference but the nut should be on the exhaust side
Are you supposed to measure the slack while riding the bike or when you're off the bike?
When it's off and is stationary 👍
I‘m 6‘4. Would you say the bike would fit well, or would I likely have problems because of my height?
Well it's tough to say. I'd go sit on one and see what you think. The only super sports that you won't feel as cramped on are probably a Hayabusa and ZX-14
0:40
is there a filter on the video? damn that bike looks too clean.
No filter, just a good looking bike 😎
@@bikesandbangs hell yeah, i have the same one. love this machine.
I throw away the factory pin and replace with a hitch pin