Major separator damage! (Part 2) New rotor gets installed in the John Deere S770!

Поділитися
Вставка
  • Опубліковано 6 лис 2024

КОМЕНТАРІ • 283

  • @donalddehaven3229
    @donalddehaven3229 Рік тому +44

    This was truly amazing. I have never actually seen the inside workings of a combine in the way you just showed us. The skill level to accomplish this job is astounding. I would love to have been there to help. I’ll bring the coffee and doughnuts next time. Love the channel.

    • @ZKMasterTech
      @ZKMasterTech  Рік тому +7

      Thank you! It was a huge project! Runs like a dream now!

    • @calcolson2813
      @calcolson2813 Рік тому +15

      The worker removing the dead Coon needs combat pay.

    • @diggerdave.6587
      @diggerdave.6587 Рік тому +5

      @@calcolson2813 that bit was hilarious.

    • @BruceBergman
      @BruceBergman Рік тому

      Repeat:a smear of Vicks Vapo-Rub under the nose and repeat as needed. Search Team (Ripe) Body Recovery trick.

    • @BruceBergman
      @BruceBergman Рік тому

      He's channeling Oscar The Grouch crawling inside the belly Of The Beast... Combine Combat🙂

  • @DavidVerch
    @DavidVerch 11 місяців тому +3

    I like these videos because it shows a professional working environment which is rare on youtube. You guys work well together.

  • @bertrutledge4546
    @bertrutledge4546 Рік тому +26

    Don't know if Josh is blessed or cursed for having to work with you but he has certainly learned a heck of a lot from you. You are a good teacher and hard worker. Sloan Implement is lucky to have you. Love all the videos. Thanks

  • @paulbush7095
    @paulbush7095 Рік тому +5

    I noticed that whenever Mr. Z refers to “we”, as in “we have to remove an impossible to reach component of this combine” it’s usually Josh crammed into some small space with a wrench. Seniority does have its advantages.

    • @ZKMasterTech
      @ZKMasterTech  Рік тому +6

      It’s the perfect combination 😂 big guy for the heavy lifting and small guy to shove in the small holes lol. Got to have both sometimes

  • @pootthatbak2578
    @pootthatbak2578 Рік тому +17

    Im glad you guys are light hearted and having some fun over there. Its so important to have a team with good personalities that can tolerate each other in high stress jobs

  • @scottmartin3985
    @scottmartin3985 Рік тому +4

    Damn I think Josh needs a raise for that one

  • @megamadgamer
    @megamadgamer Рік тому +8

    The "Oh baby it's a tripple!" cracked me up! And hats of to all of y'all, you have a great team with genuïne skill and a sense of humor to boot! Keep them wrenches turning!

  • @roberthousedorfii1743
    @roberthousedorfii1743 Рік тому +1

    Dude, that Tite-reach tool earned you a sub all by itself...

  • @jessevossler77
    @jessevossler77 Рік тому +11

    Great video. I’m 6’5” and 270 pounds. I work on New Holland combines. I feel for you. Big guys in tight spots and lifting heavy things not fun. Like watching your videos and comparing the two different machines. Deere seems way more complicated than New Holland. Keep up the good work.

  • @ollie-lk5dx
    @ollie-lk5dx Рік тому +1

    My hat is off to you guys, I usually say it take twice as long to reassemble as to reassemble.

  • @marlondeere3039R
    @marlondeere3039R Рік тому +3

    Cannot believe I haven't seen a finger with a bandaid yet and a bent shaft.
    Great job on the video.

  • @Eddie_Schantz
    @Eddie_Schantz 22 дні тому

    That racoon you found in the fan housing reminded me that in 1971 I was on a crew running four model G Gleaners. We sat for rain several days and when we
    went back to work, the boss took my machine to cut a sampe for a moisture test. Somehow a skunk got into the header and was in there when he kicked the
    machine in gear. I don't need to tell you what I dealt with for several hours until I got enough wheat run thru it to get rid of the smell.

  • @raycollington4310
    @raycollington4310 Рік тому +18

    You guys work well together and are very professional. This was a good project to show us, thank you both.

  • @christophermurphy943
    @christophermurphy943 Рік тому +10

    Raccoons in the fan shroud have become a bigger problem with hydraulically driven fans because they don’t slip like a belt driven fan. They usually destroy the fan and cooling package. Good idea to inspect fan shroud area when checking fluids before start up, especially in colder months. The raccoons also damage wiring harnesses and sound deadening foam. I’ve seen it be a much more gruesome mess to deal with than what you encountered. So glad that was not the case for you guys. As always, great video.

    • @BWYinYang
      @BWYinYang Рік тому +1

      Would be great Elmer Fudd hat.

  • @farmernige
    @farmernige 11 місяців тому +1

    Best 2 videos so far. Brilliant explanation of how it works how the damage happened and how you fixed it. MasterTech is an understatement ❤

  • @TW-du7hb
    @TW-du7hb Рік тому +2

    Huge job! I imagine that any debris left in a field could be damaging. Old steel fence post, tools, etc. left behind. Enjoy the humor, keeps a guys sanity during a tough days work.

  • @petereriksson1390
    @petereriksson1390 3 місяці тому +1

    Dear Sir's the skills level from you on this restauration/repair are second to none, amazing knowledge from you! From Peter Eriksson Sweden Europe 😊😊😊!

  • @timothykiggins1601
    @timothykiggins1601 5 місяців тому +1

    Zeth, I am new to your channel and I have to say without a doubt you are a true pro at anything John Deere. I hope you put out new content.

    • @ZKMasterTech
      @ZKMasterTech  5 місяців тому

      There’s over 100 videos on my channel. Thank you for watching!

  • @edwinhsingmaster9135
    @edwinhsingmaster9135 Рік тому +1

    I'm an auto mechanic, but the son of an insurance man, so ingestion insurance was a surprise. Sure paid off for this owner! Not know anything about combines, that was very interesting. Great job and God Bless cordless tools.

  • @ryan70100
    @ryan70100 Рік тому +1

    21:32 hahaha. Didn’t know I was that old now to catch that. Great video man I know this took many many hours. Well done too everybody involved

  • @declanoshaughnessy7733
    @declanoshaughnessy7733 Рік тому +1

    Hi guys, Declan here first of all 100%work on disassembly and reassembly of rotor in and out of rotor one huge question I have for ye as it was being done how in the world did ye get the splines at the back to match each other to lock in best wishes from Galway Ireland 👍👍🙏🙏

  • @stevenicoson6670
    @stevenicoson6670 Рік тому +8

    Thanks for another great video. It was interesting and enjoyable.
    Part two was super interesting. Appreciate your comments at the start to clear up a lot of questions. Thanks again ZK.
    Wow. Putting that beast back together again was super interesting. Lots of pieces to put back in the combine.
    My compliments to you ZK and Josh and the other helpers. You all did a great job. More than I would have tackled. My hat is off to all of you.
    Josh. Sorry about the raccoon. Nasty animals. But you got it out.
    Thanks for teaching us the lessons on this one. Big big job.
    My compliments to all of the.
    Thanks
    The Iowa Farm Boy.

  • @groth3395
    @groth3395 Рік тому +4

    Your work may be one "tiny cog" in a giant agricultural "machine". But it is a critical cog and impressive. I am amazed at not only your expertise but your patience.

  • @andyknox9276
    @andyknox9276 Рік тому +2

    Good video get to see the inside of combine looks a lot of work to put back in the field.

  • @jonjanke6367
    @jonjanke6367 Рік тому +2

    Good thing you have an assistant that can get into small places😀

  • @mikemanes6811
    @mikemanes6811 Рік тому +2

    Thanks for the explanation of what did the damage, very interesting!

  • @hoff8322
    @hoff8322 Рік тому +2

    I had to do that in a s670 what a job. Big jigsaw puzzle. Well done 👏

  • @bruceermel5830
    @bruceermel5830 6 місяців тому

    Wow! You guys are really something. True professionals for sure. I was really excited to see it run! Any chance to see all your hard work in action?

  • @davidtoups4684
    @davidtoups4684 Рік тому +2

    I still can't get over how complicated combines are. It's amazing they work at all! You and Josh seem to be having fun, though. That makes work go a lot better,

  • @johnkinnane547
    @johnkinnane547 Рік тому +2

    G’day mate and greetings from Tasmania Australia 🇦🇺 I think that the channel is terrific, these tractors and headers are really something else and very interesting. I have subscribed and look forward to watching more, kind regards John

  • @danfinley3690
    @danfinley3690 Рік тому +3

    So amazing y’all got a good look into the guts of the beast wow thanks for all of the hard work you do that goes into your explanations and the content keep em coming

  • @kevinknight470
    @kevinknight470 Рік тому +2

    Great job gentlemen. I knew that modern combines are efficient, now I know why. Keep up the great videos, thanx.😃

  • @CAV-jk1ee
    @CAV-jk1ee Рік тому +2

    Well done on your videos: Informative, innovative, and entertaining. Your presentation with a calm, balanced voice, and consistent rate of speech, welcomes viewers: and thankfully no foul language. (Try listening to a screeching obnoxious voice on UA-cam videos.) Outstanding videos. FYI, I am the first generation of my family in 300 years who was never a farmer.

  • @spirit123acf
    @spirit123acf Рік тому +2

    This was amazing The skill level to accomplish this job is astounding.

  • @LarryHart-cl4vm
    @LarryHart-cl4vm 9 днів тому

    Oh yes a very sweet little job men ! Get'er done with safety and pride men!

  • @Showboat_Six
    @Showboat_Six Рік тому +1

    I would love to see a video of how a combine is assembled at the factory

  • @m1mdunne
    @m1mdunne Рік тому +2

    ZK man - you make all things work... rockin!

  • @chrisgossman6512
    @chrisgossman6512 Рік тому +4

    Just incredible amount of work on this video. Professional techniques included. I am subscribed for for this amount of detail.
    Thank you for sharing.
    Happy subscriber 😊! Great job. My like 👍 is an automatically a given.

  • @harared831
    @harared831 Рік тому

    I want one of those Tite-Reach tools. Genius.

  • @mogwaifan7094
    @mogwaifan7094 Рік тому +4

    Hi,
    I,m not a massive JD fan but I was fascinated watching this repair being done. Saw a lot of your previous videos and liked your presentation style.
    Subscribed.
    Regards from Ireland

  • @farmahedvikaslatinky
    @farmahedvikaslatinky Рік тому +2

    LOL..... Mýval se ubytoval u teplého chladiče a pak nestíhal utéct . Jinak opět naprosto skvělá ukázka toho, jak to dělají profesionálové . Mistři nad mistry učení. God bless you .

  • @jazzerbyte
    @jazzerbyte Рік тому +3

    What a project! It was interesting to see what the "other guy" looked like to cause all that damage. I like the idea that nearly all mechanical failures can be repaired on this expensive equipment - even something as extreme as this. Thanks for the mention of the Tite Reach Extension tool - that does look useful.

  • @johnpappas2060
    @johnpappas2060 10 місяців тому +1

    Bless The best tool in your box & truck is Josh. AWESOME 👏 Thanks 😊

  • @m4gr-m4gr
    @m4gr-m4gr Рік тому +2

    Nice video!❤ Greetings from Greece

  • @jamesbillington9280
    @jamesbillington9280 Рік тому +2

    Excellent work, God bless you guys!

  • @hordboy
    @hordboy Рік тому +2

    I was wondering in the previous video how a ripper shank made it past the accelerator, or even past the header for that matter. Now we know the story! 😁

  • @P_Rund1952
    @P_Rund1952 Рік тому +4

    Another fascinating video. The last JD combine I was inside of was my 8820 when I was still farming. Even with rotor type separating, a lot of the newer machines still look somewhat familiar. That would have been a b!tch of a job to do in a farm shop. Looks like a good working team you had there.

  • @genechronister7085
    @genechronister7085 Рік тому +2

    Another awesome vid! Keep the deere's running!

  • @CRice-ln8lm
    @CRice-ln8lm Рік тому +1

    Well worth watching this series.

    • @CRice-ln8lm
      @CRice-ln8lm Рік тому

      What kind of lube did you put on the rotor drive spline or is it lubed by a line or ? This is the stuff I used to fix. ua-cam.com/video/BLrpg8Bya24/v-deo.html

  • @donmiller4089
    @donmiller4089 Рік тому

    When you have a good team it gets things done

  • @arthurs5704
    @arthurs5704 Рік тому +1

    Thanks for showing us what the inside this complex machine looks like.
    You and your staff are expert mechanics.
    Did you ever have parts left over after doing a job like this?

  • @aaronf.4940
    @aaronf.4940 Рік тому +1

    There's absolutely no way he shut that off in two seconds. If the machine was under load that separator will stop within 2-3 seconds without total destruction taking place inside. I've actually ran the same thing in one of our combines. I heard a clunk in the feederhouse and shut everything off right then. The s tine shot down through the stone trap bent the front plate on the transmission, pulled it back in the feed accelerator into the rotor busted two threshing elements then busted a separating grate where it exited the rotor. Replacement parts were two threshing elements, a threshing grate, a set of3 tines, stone trap door, and plastic door that covers the threshing grate that broke. No damage to the feed accelerator. I enjoy your videos.

  • @williamorman4779
    @williamorman4779 Рік тому +2

    Beautiful job,seth you men make a heck of a good team.

  • @johnbucklerfarms
    @johnbucklerfarms Рік тому +1

    I must say I didn’t know they have Ingestion insurance and Also You sold me On Milwaukee cordless Tools I was a Dewalt person but Congratulations on another Job that was I thought a Total!👍👍

  • @dschefers9700
    @dschefers9700 Рік тому

    That was a great effort. Done similar work on are old IH 1480. Not a nice job for a big guy like you. Thank good for Josh.

  • @victorbellan8357
    @victorbellan8357 Рік тому +2

    Pretty interesting, , thought working on a locomotive was tough , combines more involved & more moving parts ! Thanks for sharing!

  • @andrewplumb6189
    @andrewplumb6189 6 годин тому

    Hi just catching up on some of your older videos. I'm not familiar with s series jd combines. What do the cardan shafts and 90 deg gear box that I could see above the rotor do?

  • @timgear9892
    @timgear9892 Рік тому +2

    Thanks for the back story and picts of the damaging coil tine. Who would have thought that thing would get past the rock trap. There are so many pieces to this job, I am amazed you guys can figure it all out. Guess that is where you get the name Master Tech!
    Great video, thanks..... I still would be talking hard to my salesman about doing a trade for a brand new S770 as this one never will be worth more to trade than now with those new parts installed.:)

  • @davidkimmel4216
    @davidkimmel4216 Рік тому +4

    You guys work so well together.
    That makes days go a lot easier 😊
    Teamwork 🤗😁

  • @greghenderson755
    @greghenderson755 Рік тому

    awesome vid...what a job people wonder why a combine costs so much dont realize the engineering and fabrication, labor and machining of all those parts. Great job!!!!Nothing Runs like a🦌

  • @tiptop7104
    @tiptop7104 Рік тому +4

    Absolutely amazing stuff there, great job guys, just love watching your videos

  • @gregorythomas333
    @gregorythomas333 Рік тому +1

    Josh should get some hazard pay for all that...wow what a huge racoon!
    this was a really great job to watch...thank you guys for letting us see everything...very instructional.
    The #1 piston at the end...OUCH...that made me cringe & twitch seeing the valve imbedded in the top of the piston.

  • @Showboat_Six
    @Showboat_Six Рік тому

    Imagine all of the bolts, the pieces, the nuts and components required to make this. Combine a combine.!

  • @mfc4591
    @mfc4591 Рік тому +1

    I am impressed that your men were able to get the coon and its faeces (yes its right I checked!) out without hurling all over the green paint ! Installing anything long on a tunnel with a spline at one end is a nightmare. I know ! Liked the version of jingle bells !

  • @kerrygleeson4409
    @kerrygleeson4409 Рік тому +1

    Thanks for sharing Zeth always very interesting

  • @oldbluedog
    @oldbluedog Рік тому +3

    We must be pretty stupid or tight here in Australia 🇦🇺 90% of those bent n broken part would have been hammered straight and cracks welded before being reinstalled with the original bolts.
    It is an insurance job which does give a loot if latitude in a repair and JD central is up the road for you.
    We are pretty well on the end of a very long supply chain and most work is farmer completed not workshop.
    The contrast is interesting as is the prices over there. Much higher here based on the exchange rate and again distance.
    Thanks for the videos.
    I’d post the raccoon 🦝 as a separate video. One of the funnier things I’ve seen in a while.
    Had a tractor catch fire recently on starting after rodents made themselves at home in the starter harness under the dash. We got it out but the harness was cooked. Got to love the critters.

    • @pootthatbak2578
      @pootthatbak2578 Рік тому

      Replacing all the parts with new versus hammering straight/ welding back together probably depends on the owners insurance or overall cash on hand. This company survives by doing these sorts of repairs, so first, you must consider who we are viewing. For every combine you see in this shop, there are probably 5 that stay in the field until a local mechanic or farmhand fixes it.

    • @ShainAndrews
      @ShainAndrews Рік тому

      Yeah parts availability and cost in AU is ridiculous. You're held hostage. Trust me if a guy had it back to the wall in the US parts would be hammered back into submission and stuffed back where they came from.

  • @pootthatbak2578
    @pootthatbak2578 Рік тому +6

    Been around forklifts a long time. Its very critical to help the driver by calling out steer wheels position during tight manuevers..which was done here. The forklift operators lose track, cant see the wheels underneath.

  • @Thedevontree
    @Thedevontree Рік тому +1

    Excellent Macanic makes it look easy

  • @surplushunter
    @surplushunter Рік тому +2

    An unbelieveable Job!!!!

  • @christianpaul3303
    @christianpaul3303 Рік тому +1

    …and today I decided Josh is a warrior and I’m not suited for this work. 😂

  • @markdice2500
    @markdice2500 Рік тому

    Imagine needing to fabricate these parts on site! Makes one appreciate quality control in the design and manufacturing of duplicate and interchangeable parts. A lot of thanks can go to the U.S. Ordnance Department who initiated a plan for the mass production of gun parts back in the 1850s (pre-Civil War).

  • @MrMagnum7220
    @MrMagnum7220 Рік тому +1

    Your raccoon was due for swapping out, how often do you recommend changing them?

  • @codyvandieren2069
    @codyvandieren2069 Рік тому

    For us red guys removing and installing a rotor is pretty common. It’s amazing to see the difference between the red and green machine. Great video

  • @mauricebrosseau9181
    @mauricebrosseau9181 Місяць тому

    Any arguments on the difference between a rotary and a conventional combine.

  • @keithfork8663
    @keithfork8663 10 місяців тому

    A bump cap helps in those confines.

  • @stephenheyes4324
    @stephenheyes4324 Рік тому +2

    Good job guys great work

  • @ericpaul4575
    @ericpaul4575 Рік тому +4

    Did you play Rock-Paper-Scissors to see who would get to remove the coon from the fan shroud?

  • @kennethbarris3210
    @kennethbarris3210 Рік тому

    Just wondering why you don't clean the dirt and stems out of the combine before you put in new parts.

  • @feanor3876
    @feanor3876 Рік тому

    Thank you for answering my question.

  • @alffred4021
    @alffred4021 Рік тому +1

    Super eure Videos, mit den besten Wünschen aus der 🇨🇭

  • @mattgilbertson7529
    @mattgilbertson7529 Рік тому +1

    I’d hate to meet you in a dark alley seeing the way you threw those concaves around when installing them! That’s a two man job at our farm.

  • @frasermathers2287
    @frasermathers2287 Рік тому

    Hi Zeth, as always another outstanding video! From animal disposal, to skilled techs at work all captured in a great video and I never had to move from my seat, what more could a man ask for! This is one of those tasks although its not easy. makes coming to work worthwhile as it give great opportunity to use so many of your skills and knowledge and gives great variety to your day. I also have to say that watching Josh crawl about in the combine reminded me of why my knees are shot! Take care of them cause once you get to my age there well done in. Thanks as always.

  • @jasonwhite5125
    @jasonwhite5125 Рік тому

    Any chance for a link to that bolt extension tool? I looked on Amazon and could not find the exact tool you showed. My pops, brother and I could all use that tool 100xs over lol

  • @gardnermiller6820
    @gardnermiller6820 Рік тому

    Finding that raccoon I'm sure was surprising, however, I'll do you one better, a live raccoon! Years ago when I was working at a marina we brought a boat in from winter storage and when I uncovered it the biggest raccoon I'd ever seen jumped at me and out of the boat. Talk about having to clean your drawers!! Then we had an angry live raccoon loose in the shop, but that's another story! Great video! Enjoy learning about these large repairs.

    • @ZKMasterTech
      @ZKMasterTech  Рік тому +1

      I’ve had a lot of live coon encounters over the years

    • @BWYinYang
      @BWYinYang Рік тому

      I wanna hear the other story. 😁

    • @gardnermiller6820
      @gardnermiller6820 Рік тому

      Let's just say that it took about 40 minutes, 3 guys with various yard tools and it didn't end well for the raccoon.

    • @BWYinYang
      @BWYinYang Рік тому

      @@gardnermiller6820 🤣 Indeed angry one

  • @nikilphd4916
    @nikilphd4916 Рік тому

    I know its not nice to ask but how much has the hole rebuild cost?

  • @petereriksson1390
    @petereriksson1390 3 місяці тому

    Thanks that answer my question from part 1 video! From Peter Eriksson Sweden Europe 😅😊😊!

  • @joebrown8973
    @joebrown8973 Рік тому +1

    Love watching your channel I like the way you explain thing keep it up

  • @СергейЕ.Р
    @СергейЕ.Р Рік тому +2

    Привет из России, я посмотрел все ваши видео, они качественные, я люблю технику Джон Дир, хоть и не владею вашим языком но смотрю видео потому что интересуюсь технической составляющей в видео.

  • @ethanbourgeault234
    @ethanbourgeault234 Рік тому

    Lol...I when you had the floor out i would have set the shoe auger backlash...RIGHT THEN. Haha, great video

  • @mauricebrosseau9181
    @mauricebrosseau9181 Місяць тому

    Wow that was an interesting adventure. Surprised any of you guys never smashed a pinky not wearing impact gloves.

  • @Caleb20824
    @Caleb20824 Рік тому

    Now that you have done this job and the fuel tank replacement on the 8R 370. If u had a choice to do this job again or the 8R. Which would it be?

  • @eduardocarvalho1547
    @eduardocarvalho1547 Рік тому +1

    4:33 That raccoon would be the perfect excuse for a few pranks around the workshop!!! Amazing work as always!

    • @ZKMasterTech
      @ZKMasterTech  Рік тому +1

      No I’m not that mean lol. Too bad you didn’t have smell-a-vision!

    • @eduardocarvalho1547
      @eduardocarvalho1547 Рік тому

      @@ZKMasterTech I believe you! Your workmate was in such a panic: "take it, TAKE ITTTT" 🤮🥵

    • @BWYinYang
      @BWYinYang Рік тому

      Make Elmer Fudd hat out of it.

  • @musschootski
    @musschootski Рік тому

    At the factory, these must be installed before the cab, tank and the rest of the back end, not?

  • @xuser48
    @xuser48 Рік тому

    A couple of years ago my brothers Claas Dominator chewed through a toolbox full of tools that someone had hid away in the field (probably stolen goods). The combine survived without a scratch however the tools were bust.

  • @R.Velding
    @R.Velding Рік тому +2

    you make great videos

  • @odie5
    @odie5 Рік тому

    Do you guy do Locktide on all of the bolts?

  • @johnlangley6449
    @johnlangley6449 Рік тому

    What a job 😢 I would be getting beep ever other word go guys you rock

  • @FVmike
    @FVmike Рік тому

    I noticed a lot of the new parts came painted where as the previous parts were bare metal. I dont know anything about it, does the paint just eventually come off?

    • @normaal4663
      @normaal4663 Рік тому

      The paint will be ''sanded'' of by the corn/wheat/etc. that passes through the combine.
      The header/seperator/sieves/elevators etc.... all are becoming shiny sooner or later.

  • @Mike44460
    @Mike44460 11 місяців тому

    For future reference, Vicks Vaporub placed on the upper lip under the nose really knocks down the smell that Rocky Raccoon was giving off.

  • @adrianshjadesheehan9991
    @adrianshjadesheehan9991 Рік тому

    This man is a genius his videos are top class nothing this man can do amazing