You can rebuild your own crank shaft. Push pin out with c clamp. Install rebuild kit. Put a bolt through the new pin with a washer and a nut on the end. Then two bolts through the holes you don’t use to keep crank balanced. Impact down the bolt until you get pin flush on both sides of crank. I did it when motorcycle stores said sent it off. Lol thanks for your videos major help Bro. Salute cheers.
Nice job my dad would always hear the casings and put the bearings in the freezer for an hour before installing them, kit makes things so easier no beating sometimes they just drop in
Dude I dig it should do a 125 2stroke next and I love you videos most because there very detailed I also just bought a rm80 an 01 and this helps a lot along with you piston installation video good shit keep it up
Depending on the year of your bike you may never find one. You could send it in to Crankworks they can rebuild the crank for you that’s what I did. They also vapor blast them for you so it looks brand new when you get it back. Good luck on your rebuild bud
I have a rm 80 and you put pressure on the radiator hose, find me to see if I can find the fault, it has a good bonba and the radiator is clean and the cap is new.
Try eBay bud. I never found one for my bike so I ended up getting it rebuilt from Crankworks. It’s easy you ship it to them, they will rebuild it & vapor blast it for you. It will look brand new
eBay, Rocky Mountain atv, Motorsport at times you can google search and it will take you to a website site that’s selling the specific part you’re looking for
Beautiful job mate 🤟 have you got any links for the bolts for the engine covers? I’m after a bearing next to the water pump as well can’t find one if you can help would be much appreciated mate 🤘🏻🤙🏻
I feel your pain bud most parts are discontinued which makes the projects extremely difficult. Try eBay,Motorsport and Rocky MountainATV. Most times if you call them directly you’ll have better luck. Good luck with your project bud
Boom I've subscribed about time I see a proper custom rm80 rebuild thanks for the inspiration hehe was gonna rebuild my yz250f witch well maybe I still might but now I'm thinking I should just get rid off it and use to completely rebuild my rm80 and custom my rm nice video man 👍🙂
Where did u purchase the new cylinder jug from? Just picked up a 1994 rm80 and I can't seem to find that many parts for them on eBay. I'm in need of plastics as well
Thanks for watching bud. I sent the crankshaft to Crankworks where they rebuild it for me. Than they shipped it back to me. Got my plastics from ufu. Most parts like bearing $ bearing and seals I had to grab them separate good luck with your build man feel free to reach out
Keep re watching your videos haha as I said when I look up rm80 rebuilds you the onlyone that comes up haha anyways I was looking into it for my own but you should look into seeing if you can put a VHM cylinder head on the motor haha would be deffently one a kind then
I appreciate your support. I was wondering If there’s maybe a big bore kit to make it faster that would be dope I’ll look into it good looking out man getting ready to put everything back together. All I got now is the carb and rear shocks the bike will be complete
First great content ! Very thorough and visually appealing! Did you buy the parts for rebuild (gaskets, seals and etc) as a rebuild kit ? Or separate ? Either way if you could you share the links for parts used that would be great.
Thanks for watching bud!! So put the bottom first leave the will off. Lift The top turn it counterclockwise until it has a strong tension than put it back down with tension it will rest on the stoper on the right than put the wheel gear ⚙️ on I did it off camera cuz it was hard to get footage
Damn this was nice bro i was just think bout breaking my engine down but scared 😂 an im not beat to take it to the shop is this the same as 08 rm?? i took my shit apart an customizein an puttin light on it but the engine my next hassel an an i love how u power coated ur 🔥🔥
Thanks for watching I appreciate all the support. Please don’t forget to subscribe if you haven’t already and give this video a thumbs 👍 up see you on the next video
Finally a motorcycle engine rebuild using proper procedure and the correct tools and parts!
Thank you.
Good afternoon,how many liters does the oil in the box or in that small yellow stopper
Thanks brother!
Just picked up my 10 year old bad az girl a 1990 rm80.
Runs great but learning as much as i can about these little beasts
These small bikes are fun to play with and still power bikes
You can rebuild your own crank shaft.
Push pin out with c clamp. Install rebuild kit.
Put a bolt through the new pin with a washer and a nut on the end.
Then two bolts through the holes you don’t use to keep crank balanced.
Impact down the bolt until you get pin flush on both sides of crank.
I did it when motorcycle stores said sent it off.
Lol thanks for your videos major help Bro. Salute cheers.
Nice job my dad would always hear the casings and put the bearings in the freezer for an hour before installing them, kit makes things so easier no beating sometimes they just drop in
Dude I dig it should do a 125 2stroke next and I love you videos most because there very detailed I also just bought a rm80 an 01 and this helps a lot along with you piston installation video good shit keep it up
I appreciate it bud
Awesome bud. I did a full rebuild on my 03 rm85, I got the vf3, started it up and it had high idle. So I used rtv on the gasket and it worked lol.
Nice thanks for sharing bud
I love this . Currently building my yz85
Thanks bud
Hello, how much did it cost for all the parts to rebuild it all?
I would say rebuild cost wasn’t too bad but finding parts was just extremely difficult the fact that it’s from 94 thanks for watching bud
Flawless execution my friend🔥.
Can't wait to see the final reveal and ride🤙
Thanks bud I appreciate it the support
What’s the torque spec on the cylinder head
thankyou for the video dude
Hi Dan can you tell me please if this shares the same crank as the later rm85 please 🙏 I’m struggling to find aftermarket rm80 crank. Thankyou
Depending on the year of your bike you may never find one. You could send it in to Crankworks they can rebuild the crank for you that’s what I did. They also vapor blast them for you so it looks brand new when you get it back. Good luck on your rebuild bud
I have a rm 80 and you put pressure on the radiator hose, find me to see if I can find the fault, it has a good bonba and the radiator is clean and the cap is new.
What is the gear that connects to the water pump called?
Hello. I have like yours suzuki 1992y. Meybe can help? where i can buy cylinder becouse i not found
Im looking for a crank for my 2000 rm80 do you know if it’s possible to get one?
Try eBay bud. I never found one for my bike so I ended up getting it rebuilt from Crankworks. It’s easy you ship it to them, they will rebuild it & vapor blast it for you. It will look brand new
Wow that’s so cool! Thank you for the video, being a UA-camr I get why other UA-camrs say it’s so much work! Thanks again. Keep up the good work man!
Thanks bud
Where do u get ya parts from like the crank and stuff cant find it no where
eBay, Rocky Mountain atv, Motorsport at times you can google search and it will take you to a website site that’s selling the specific part you’re looking for
Damn man thats so clean....i can't wait to get a project bike
Thanks bro. Get one now before summer. Thanks for your support
Nice man, we had to do that to my 250, like 10 times, my bros have it for now, but I ripped it some today!
Nice Crf 250 was my first bike that I owned
What’s that red stuff
Beautiful job mate 🤟 have you got any links for the bolts for the engine covers? I’m after a bearing next to the water pump as well can’t find one if you can help would be much appreciated mate 🤘🏻🤙🏻
www.ebay.com/itm/153924506488?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1RUhSb4rqQEy2AJuZuSJ5Mw28&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=153924506488&targetid=2321310837104&device=m&mktype=pla&googleloc=9002168&poi=&campaignid=21214302385&mkgroupid=161029887581&rlsatarget=pla-2321310837104&abcId=9407524&merchantid=113791553&gad_source=1&gbraid=0AAAAAD_QDh8FHPGKuLJ_Z3Zi2QK9wYSE3&gclid=Cj0KCQjwt4a2BhD6ARIsALgH7DpAH1FNSLRD46qSsAz-0HWZBMiQ7lzCTNN65vFCe6YcpP4kdplEOzcaAnYMEALw_wcB
They are for a rm 125 will they still fit???? & appreciate you mate love the video 😊
All sorted now 🤙🏻 nice one
You forgot a cylinder jug nut when you put the power valve cover on 😂
Good looking out. I was gonna replace that piston and cylinder anyway it was jumk
Sick man! Tomorrow I’ll try to work on my bike.
Thanks bud. Yeah man film yourself taking things apart and take pictures for reference that’s how it started
cannot find a top end for my 93 rm 80 any where any suggestions
I feel your pain bud most parts are discontinued which makes the projects extremely difficult. Try eBay,Motorsport and Rocky MountainATV. Most times if you call them directly you’ll have better luck. Good luck with your project bud
brother I have a Suzuki RM85cc and I wanted a new makina in tera that I only have to ride it as soon as you get it
Boom I've subscribed about time I see a proper custom rm80 rebuild thanks for the inspiration hehe was gonna rebuild my yz250f witch well maybe I still might but now I'm thinking I should just get rid off it and use to completely rebuild my rm80 and custom my rm nice video man 👍🙂
Thanks bud I appreciate your support
Mad props, Dan. You make that look so easy. Excellent share, My Friend. See you in the next video.
Thanks bud trying to make it as short as possible. Thanks for your support my friend
@@danshealthylifestyle8443 Always, My Friend.
Funny thing is your rm80 didn't look bad to start off with now it's just gonna be a beast mise well call it a rm85 lol
Thanks for the support bud.
Where did u purchase the new cylinder jug from? Just picked up a 1994 rm80 and I can't seem to find that many parts for them on eBay. I'm in need of plastics as well
Thanks for watching bud. I sent the crankshaft to Crankworks where they rebuild it for me. Than they shipped it back to me. Got my plastics from ufu. Most parts like bearing $ bearing and seals I had to grab them separate good luck with your build man feel free to reach out
Que resistencia maneja cada bobina de encendido
where did you get the crank from ? and what year is it for because i am fixing a 2001 rm 80 big wheel and cant find any complete cranks
I sent the crankshaft for a rebuild at Crankworks
The bike is from 1994 I have a new video coming up putting everything back together
new to your channel bro and i like what i saw first love and support from the philippines. I ride two strokes also
Thanks for the support bud
Keep re watching your videos haha as I said when I look up rm80 rebuilds you the onlyone that comes up haha anyways I was looking into it for my own but you should look into seeing if you can put a VHM cylinder head on the motor haha would be deffently one a kind then
I appreciate your support. I was wondering If there’s maybe a big bore kit to make it faster that would be dope I’ll look into it good looking out man getting ready to put everything back together. All I got now is the carb and rear shocks the bike will be complete
First great content ! Very thorough and visually appealing! Did you buy the parts for rebuild (gaskets, seals and etc) as a rebuild kit ? Or separate ? Either way if you could you share the links for parts used that would be great.
I bought them Separate. eBay, Motorsport, Rocky Mountain atv, sometimes google them they’ll direct you to the right websites thanks for watching
how did you wind the kickstart
Thanks for watching bud!! So put the bottom first leave the will off. Lift The top turn it counterclockwise until it has a strong tension than put it back down with tension it will rest on the stoper on the right than put the wheel gear ⚙️ on I did it off camera cuz it was hard to get footage
But what was your engine parts source
What reeds did you us and where u get them I have rm 80 1993 and looking for v3 what can I us ? Thanks
Thanks for watching. The reeds I found on this bike still has a few life on them didn’t end up changing it at least for now.
But check eBay there’s a few aftermarket ones
I seen a few on eBay check them out should be the same for Rm80 & 85
So the rm 85 will work on rm 80
Damn this was nice bro i was just think bout breaking my engine down but scared 😂 an im not beat to take it to the shop is this the same as 08 rm?? i took my shit apart an customizein an puttin light on it but the engine my next hassel an an i love how u power coated ur 🔥🔥
Thanks bud. But if it’s old like mine you’re gonna have a hard time finding parts
nice share video
From 4:20/4:30 I’m tryng to figure out howu got the shift shaft sitting
Oh sorry bud I cut that part when I edit it cuz my got on the way so did it off camera
@@danshealthylifestyle8443 do u have an email I could txt u at so u could help me figure out how it goes on ?
where did you buy the boltkits? link? thx
I got it from eBay I just put the link in the description check it out
Thanks for watching I appreciate all the support. Please don’t forget to subscribe if you haven’t already and give this video a thumbs 👍 up see you on the next video
Hey man I love your videos could you check out mine?
Thanks bud ima check out your channel rn
@@danshealthylifestyle8443 np. Thanks
Bri we’re do yiu find rebuild kits
eBay, Rocky Mountain atv or try googling the the make, model and year of your bike, it’s give you website options that’s what I did
@@danshealthylifestyle8443 send pls I have no idea
Where did you get the head from
I powder coat it myself
@@danshealthylifestyle8443 thanks I didn’t know if it was after market I have a 96 rm 80 that I just rebuilt
I got 1993 and just got new oem cylinder for it
🔥🔥🔥
All love
Thanks for the support bud
Everything was perfect until you put an old piston back in....... Why?!!!!
I know right it didn’t arrived on time for the video. I made another video with the new one
👌🏽👌🏽👌🏽👌🏽👌🏽
You forgot to tighten a cylinder nut
I did some stuff off camera. I was gonna add a new piston anyway there’s a video of the ne piston check it out. Thanks for your support bud
A new piston and all the motor would be new
I know I actually have one on the way I’ll be posting a update once I get it
Thanks for watching
New piston has just arrived bud
Hey Dan, check out my newest video... I think that you will like it.
You showed everything except how to remove the flywheel😭
Sorry installing the flywheel was simple removing it on engine teardown was extremely difficult had to buy the flywheel puller the flywheel was stuck
It's okay man top notch stuff on everything else good stuff homie