How to Diagnose A Bad Clutch - 5 Signs
Вставка
- Опубліковано 9 лип 2024
- Professional Maintenance Products I Recommend
Engine Oil Flush PRO - amzn.to/45egARf
Engine Oil I recommend - Liqui Moly 5W30 (Made in Germany) - amzn.to/46htcs6
Wear Additive I recommend - Ceratec - amzn.to/3Q6uYqF
Gasoline System Cleaner PRO - amzn.to/3tjXcVT
Diesel System Cleaner PRO - amzn.to/3rCYUkK
Diesel DPF Protector Additive - amzn.to/3RGJeaI - Авто та транспорт
Professional Maintenance Products I Recommend
Engine Oil Flush PRO - amzn.to/45egARf
Engine Oil I recommend - Liqui Moly 5W30 (Made in Germany) - amzn.to/46htcs6
Wear Additive I recommend - Ceratec - amzn.to/3Q6uYqF
Gasoline System Cleaner PRO - amzn.to/3tjXcVT
Diesel System Cleaner PRO - amzn.to/3rCYUkK
Diesel DPF Protector Additive - amzn.to/3RGJeaI
Thank You, for the informational signs of my clutch going out. Now I've got a semi-challenging project.
Please add samples of the sounds.
It is important to mention that some symptoms mentioned might have absolutely nothing to do with the drive train, but actually related to engine performance being to lean/rich. Sometimes it is just down to the fact that some newer drivers dont apply enough RPM when moving off causing the engine to labour.
Hi - thanks that's great info ! Question : I have a pretty old berlingo and the clutch makes a loud clicking sound often when I press the pedal... the garage just said I have to replace the whole transmission... any thoughts?
Nice video! Keep it up!!!
Misto video-ul!
Thanks for your videos,and I have a problem to solve out In my Hilux cab,that is, when I start the engine it shudders abnormally.and also switched off. Is it a pressure plate problem
I think mine is completely gone cause the car doesnt stall in 1st or 5th.
yeah its fucked lol
Yep lol 😆
well then..my friend you've got yourself an automatic :)
kelvin hunk lmfaoooooo
I think mine is gone (
Very helpful. My 2008 ford focus is doing that
if their is wear on clutch disk, does it mean that the disk is now smooth, without any friction?
Hi I have Jeep wrangler TJ when I drive fast I hear gear noise from 2nd to the fifth gear little in the end of changing & clutch smell in the sand is the sign the clutch to be changed...& clutch padle is high.
bravo ma! si pe engleza esti bun. Multumim pentru toate video-urile pe care le faci
Thanks really useful 😉
Please advice: When driving in 4th. and 5th. gear between 2000-2500 rpm there is a rattling noise under the car. everything is check and doube check only suspect is the clutch set becouse the sound started after replacement. is a Honda Jazz1.4 2004.
.
Salut. Dețin un Ford focus MK2 benzina 2006 și manifesta primele 3 simptome explicate de tine. Vreau sa te întreb dacă este posibil că și la volata sa am probleme și cam ce simptome da volanta când începe să cedeze? Ms mult și foarte tare ce faci.😉
Nyc n soft clear talk
Is it normal that the vibration is not always appears? I just decided to go to nissan service to change the clutch set as i had vibration in 1st gear when i start. But since then the problem disappeared. Only 85k km in my nissan pulsar 1.5 dci. I bought it 1 year ago so I dont know how it was used before unfortunately.
Hi, I got some problem, when I drive hard I mean on the up hil the rpm it’s going up, and I need to remove the gas and put again, that can be the clutch problem? Thanks
Thank you! Very helpful! We could use some noises though of what the clutch sounds like when worn!
I have a problem happens after 5 10 k in miles? From stand still i select 1st when releasing the clutch i hear a drill type of sound and the van wont move but when you press the clutch pedal in and go to move off again its fine, any idea on what this can be?
Please help my clutch juddders and feels very sharp when pulling away on a cold start . When the vehicle is warm it fine. My car is a Toyota Avensis 2.2 diesel year 2010 and I believe is has a dual mass fly wheel. Thanks mo
Hi, I know this video is older but I hope I can get a reply.
So I had a question, the problem I’m having is when I’m taking off from first gear, in the Focus RS, the Engine/ Car shakes a bit. And also I’m getting burnt smell after some driving, but no smoke, just the smell.
I understood your explanation, it’s the Pressure Plates, Idk if you can elaborate cause I know it’s NOT the Motor amounts.
More importantly can I still drive the car while I save money for a new Clutches. I would greatly appreciate an Answer!!!
very informative! good job
Thanks! 💪🏻
@@99VehiclesTV I got a 2010 Audi A4 and here and there it's only in first gear when I let the clutch out it feels like the wheels are shaking like when you pull out have any ideas on that? I got scared and didn't drive the car and thought it was a clutch slipping I didn't drive the car for over a month I took it out yesterday and I pulled out in first gear like usual at least six times and it didn't do it... which is weird but like I said I let go of the clutch it's only in first gear and the wheels felt like it was shaking... Thank you in advance
I have a nissan 2005 ser spec V 2.8 my only problem is that my clutch pedal it stays low , sometimes i have to put my foot under the clutch to put it back to normal, but my car doesnt have any of those problems u were mentioning, it just stays low when driving for a long period of time, so would like to know could it be the pressure plate that it needs to be changed or could it be perhaps the clutch pedal that needs to be adjusted. Thanks
My car upper clutch cylinder is failing again n again.Release bearing I have already replaced,pressure plate and disk is ok too.Any suggestions??
My clutch pedal is right down on the floor of my Toyota audio 1400 is this a sign of clutch wearing out .
Thanks!!!
I don’t get stalks, bought another mk4 with a clutch slipping.. is soft to press, but will go high in the revs and no drive in 3rd gear.. going to change, is it recommend to change the gearbox also? (I have a spare gearbox)
Thank you this narrowed everything down
hi, my manual car jerks a lot when launching in 1st gear but when lauched in 2nd it goes smoothly any suggestion
Okay , I have a 1993 Toyota pickup 5 speed 4 wheel drive v6 .
I started to notice it was getting hard to put in gear and reverse it would grind to go into than the other day I was driving to work and I couldn't put it in gear without shutting it off and starting it again I noticed that the clutch cylinder fluid was black what does that mean?
I have a 2001 Audi TT Quattro 1.8 turbo. The pressure on my clutch is fine I can push it all the way to the floor comes all the way back up good pressure. When I push the clutch all the way down and put it in 1st gear it doesn't engage at all now my engine just revs.The 6 speed stick shift shifts every gear fine except that needed high revs or I'll lose speed while driving.I bought it and drove it home last week after driving it for an hour home I could smell a burning smell from the front driver side tire area.I knew it would need something with the clutch done to it when I bought it.So getting it to move from being parked and putting in it in 1st gear to get it going it has to be between 3000 and 3500 RPM in 1st gear just to get it moving and it's the same RPMs with each gear while I'm driving on the road or I will lose speed.The next day it got worse with the high revs to get it moving again but now higher motor revs to get it out my driveway then it had to go to between 4000-4500 RPMs in 1st gear from parked to get it going now. But the 3rd day it doesn't move at all now when I press the clutch down as I said there's a lot of clutch pedal there nice pressure feeling.The engine RPMs is going too high now and doesn't move at all I don't want the engine to scream cause it's obviously not going to move and now I can't drive it.In your opinion do you think it's the clutch? Should I just get a full Clutch kit? or you think it's a flywheel problem? Please respond this is driving me insane. Thank you very much.
Thanks for oil leak info
My clutch pedal has no foot pressure and comes back freely. I do not know what is wrong with it. I don’t know if it’s something with the hydraulics or what the deal is
My new car tends to vibrate when pick up from the car is stationary. Is it the symptoms of clutch sliping?
Bmw are de obicei un ambreiaj ce merge mai greu? Am cumparat un 320 lci si ambreiajul se apasa greu si parca vrea sa-ti impinga inapoi piciorul. Cu aceeasi chestie se confrunta si un prieten la Peugeout 407. Asa e de fabrica sau e uzat ambreiajul ?
thank you man you saved my life
Idk if is the clutch but my car just broke and like the gears doesnt move if i press the clutch. it just move when the car is off not even pressing the clutch. but if i start the car in 1st gear with my foot in the clutch the car start moving. You guys have any idea why is like that?
mine has a burnt smell inside the car when driving after like 10 mins, and also when I'm in 3rd of 4th gear and try to accelerate fast, as soon as it hits like 40mph the gear kinda slips? and it's like in neutral? so the rpm is very high (since I'm pressing the gas) but I'm no longer actually accelerating... and then when I apply brake and come down to like 20mph it goes back to normal. any help is appreciated thanks.
My clutch acts weird after like 20 ish minutes of driving it just keeps getting harder and harder to get in gear eventually it won’t be able to go in 1st 2nd 3rd haven’t tried 4th or 5th reverse works sometimes the clutch is also noisy when it gets like that I should replace the clutch throw out pilot pressure plate and flywheel all right ?
As a paranoid individual on anything that is expensive or hard to get to this helped me determine that my clutch is in fact ok
What if my gears are sticking? I can't change gears, I can press the clutch down with no problem but when driving it;s like it is almost not going to go, now I parked it, the gears won't even work.
Salut, am ambreiajul foarte tare, merita sa verific sistemul hidraulic sa nu aibe aer? sau sigur trebuie sa schimb neaparat ambreiajul?
LOL my car is showing me 3 of the 5. I don't notice slipping, but I do notice the vibration when releasing it, and sometimes it will jerk, kind of like it wants to stall, when I'm starting to move. Thanks for the video.
I have the same problem
I read somewhere that one of the signs is also when driving uphill that a burning smell coming out of the cabin could indicate a slipping clutch. This is strange to me because I don't notice any difference in the drivability or power of the car. Have you heard this?
My clutch feels fine I just get a burning smell all the time and I know it's not me I've been driving a manual for over 5 years transmission fluid? I feel alot of heat through the transmission too
A have a 2001 renault Laguna with 39 miles. The pedal is really high and the engine is stalling with noting
Do any one know pls let me know I was driving my car and in the third gear I press the clutch down and it went completely down didn’t come back then I tried to bring it up with my hands when it was again up then it hanged and doesn’t go donwn.hope y’all understand me.?
Okay well I just installed the clutch disk now I have a clutch again but when I push it in and try to shift it wouldn't in gage with out grinding can anybody tell me what to do or what the problem is it would be appreciate thanks
U r so calm
hello, nice video. i would like to ask some tips.. my car is having a hard and difficulty during climbing uphill, even in the lower gear.. imean, almost no power at all. Is it a clutch problem?
Note: i just recently replaced the fuel filter.
Start engine with handbrake ON and clutch down. Keep hand brake on and try to set off in first gear. Car should stall. If it dosent stall, your clutch is gone.
Golf 6 tsi. The car vibrates when taking off, but it drive fine and pull fine. I replace the dogbone mounting but still experiencing that problem
thank you the signs were true espially with rpm/speed
yo bro..
i have golf mk4 1999 i will never buy new cars anymore just cars before 2000
But now my golf sometimes
1. shifts gears when i start it
2. it is not grabbing any gear
3. if i turn it off it shifts like new car
4. IF i get it in gear when it is off then turn it on , the car is driving slowly without me changing gears i dont know how to explain it is sooo weird
i bled the liquid from the system and put inside new fluid... But when i checked the canister it was full the master and slave cylinders i checked also
everything i know i did.
So plz can you think of anything other that i should do ????
( it is so important for me to have a car Tuesday's i drive myself to hospital 🙏🙏🙏 respect bro )
My double cab bakkie can't engage in gears what is the problem
Great and expository video
Good morning my friend please I have a question when I engage my gear 5 I always hear a noise different from the rest gear what do you think I do
Then the 5th gear in the gearbox is damaged or the sychronizer ring
good to know my clutch is good, once it goes out I'm going aftermarket though
My cluch is running out over night there is no cluch after putting in gear then start its ok after a while
Thanks
hi hope you doing fine when i pres my clucth padel wining sounds comes and when i press padal car gets slow speed what do you think whats wrong with it and some time in 3rd gear car staret hikups as well not cruent break but like car will shut in soon and its not having energy like its in high gear but revs are less
The whining is the clutch bearing. It's had it. You can replace it on its own but not a good idea. Best to replace whole clutch
I just had my clutch plate go out. It was a intermittent problem. Turn out to be the center springs in the plate. Some times it drove well. Other times I couldn't get in gear. One spring was gone and three more about ready to go.
What can be the damage on my car. I was driving along highway and as I engage gear number six and accelerated, my car had a high rave and was not in gear. I then stopped instantly and checked underneath, there was leaking oil on the ground which I don't know whether it's gear oil or engine oil. After that I tried to start the car and engage gear but the car was not moving. Later I checked engine oil there was nothing and brake fluid there was nothing again. What could be the problem
Hi what if you can hear a noise like slight whine then goes away when you press the clutch in when stationary?
That mean the transmission bearing is bad or your pilot bearing is bad, that happen to me too at first I thought it was the pilot bearing but it was the transmission gear hope that helps you
Hey I have a question my clutch pedal goes stiff like really stiff and sometimes it gets stuck like I can't press it down at all or it won't come up randomly, what could the cues be
That could be the master cylinder.
I get a screeching sound when pulling away in 1st gear sometimes the car shakes a little. This is worse on a hill start and in cold weather, the car drives normally in all other gears and the biting point is still in the middle of the pedals travel. I have been told it might be the one way bearing in the clutch. What do you think the problem could be?
What car did you have ? think I have the issue rn but not sure if it’s the clutch or the transmission
How to tell if it is time to change your timing belt+tensioner? Because I bought an auction car without service history and I don't know when it was last changed. Thanks
Hi. I would change it anyway if I were you. Maybe it’s too old
My word I have the same problem in the mornings I can't even put my car in gear then it stalls or when am driving from gear 1 to gear 4 it jerks ( when I accelerator)
Thank you for the info. What is wrong if its tight to shift to 1st and 2nd gear but not consistently?
Check you coolant maybe it's low
I Play 2 Win Truth Seeker I would change the window wipers first before anything
Charly85 no I would suggest he takes a look at his tire pressure before anything
Jam Maldonado and make sure there no stones stuck in the tread
What does it mean when my car shifts out of 1st and kind of jolts? Is it the clutch pack? Or possibly something else?
Could be the mechanism that is connected with your shifter to change gears. Or maybe some gear must have wears.
Thank u
What if a car comes with self adjusting clutch?
Does it affects the power of the car especially in climbing hill?
Yeah you may experience a lack of power
Subbed because of this video
...my nissan vannet ..i have reallywodered why it is shaking when i slowly engauge the clutch..man you have helped me big time loke you from kenya thanks for you educative..show..i know now i need a clutch plate .
I am from 🇰🇪 kenya
What about when a car is very slow when moving and engine revs without going anywhere while in gear? I set off from lights and when i release the clutch the engine revs high before its normal again. Also plz diagnose a flywheel fault thanks. my clutch is kaput i guess, i have the sl;ave cylinder and clutch plate and frame already to replace.
Just an update. It was the clutch lol. The old clutch was so worn the metal plate under the friction part was pointing up having snapped away from its studs lol. WOW i thought, but all good now. Used the C20LET clutch which is more robust for mapping etc.
My clutch is kaput i guess 😂
@@ungestreckt1 EXACTLY RIGHT LOL. Also the clutch plate was in an awful state, the metal part coming away from the actual plate. How it went into gear fooled me.
Hi, I test drove a 2018 mustang ecoboost and it shifted so easily. Clutch slid into gears very easy. I then tested a gt and it took alot more to put it into first gear. Also when shifting it Jerked alot. Not sure ifbit was due to being rusty at manual but these were test driven 1hr apart. I'm in the process of buying the gt
Totally irrelevant but thanks for sharing
My 96 Nissan Hardbody all of the sudden didn't want to go into gear. Had to start it in gear to move, but hasn't slipped or shown any other signs. Any ideas or similar problem?
Inxase you don't know that's a slave or master cylinder but it's been 3 months sure you know now
Useful
How come every time I put in the clutch all the way, it doesn’t want to go into first? If I force it in, it either grinds, or goes in, but it makes a loud noise. But every time I go from neutral to reverse, it only grinds, it doesn’t go into any gear without grinding. That’s why I keep turning it on in gear, which isn’t good.
look up "rev matching" that should give the answer to your question. 1st gear is really only used to get the car moving. You never want to shift into first when driving normally, because it's fucking bad for your clutch, shifting to first (or reverse) at "high" speeds is considered money shifting. I reckon your car manufacturer implemented some safety percussion into your car, preventing the driver to carelessly shift into first, that's why it won't go in. the grinding sound is the sound of the clutch getting fucked up.
If the reverse gear refuses to engage wait for a few seconds , go into first gear , go just a little
forward and then the reverse gear should not crunch , works for me every time .
It' a good habit not to switch between 1st and reverse ( and viceversa )
too fast or you 'll hear that grinding noise .
@@-pdp-3779 very true, one way to test is to coast at around 30 mph and hold the gear towards first gear and slowly reduce the speed with the brakes. You should find that as you slow down the gear slips into place when safe speed is met. it's the equivalent of having "do not drink" on bleach but that is none of my business.
Hi there my clutch slipped once and now there’s a slight burning smell off the engine when I drive but everything seems to be working fine otherwise?
Need a transmission fluid change probably supposed to be done every 30k miles
Thanks for the tutorial video. My diesel car is working fine but the clutch slips when I try to run fast. It slips at first for 3 seconds then comes normal. Can I try to adjust the clutch first before I change it? Thanks very much.
hi my gear is vibrating while slowly engaged after changing the clutch kit including bearing, the gear shift is getting harder like stuck to engage into 1st gear, is kind of resistant, have to shift to other gear and try engage again, sometime it doesn't work have to engage forcefully. what is going on here?
before changing, it was totally smooth during engagement, no vibration no hard shift.
Hello!
I own Volvo s60 d5 2006, and when engine is cold I hear rattling noise behind front left wheel. When I press clutch pedal, the sound is gone, or when it starts to rise temperature. Sometimes it makes noise, sometimes it don't.
Shifting is normal, can't feel vibration or clutch pedal been hit while its pressed.
Cheers!
I think thats a engine problem, i had a 2007 baleno started giving the same problem and that's what it was diagnosed with
@@flowerhobi1673 I also think it's about engine mounts,but it's just guessing..
Pilot bearing in the transmission
Felicitari
Hi I have a Vauxhall corsa twinport for over 20000 miles I have been battling with the biting point on my clutch it slips a bit I believe due to oil leaking into it but the clutch doesn't show certain signs of failure maybe because I have mastered the precise amount of gas to give it. last few days I can hear a slight clunking noise when I change gear only 1st and 2nd gear. it's only on 55000 miles I have owned about 15 cheap cars in my life and never had clutch failure once. I don't understand exactly what is wrong with it the biting point is quite high but the clutch is still withstanding extreme hillstarts. I live in wales and even the sheep here get burnt out clutches its so hilly :-) how long can a clutch last like this and would I have already done damaged to the flywheel? Thanks for posting this video. steve.
I press my clutch and the rpm goes down, car shakes a bit and sometimes stalls when i press the clutch. Thoughts?
Nemoz_BB6 Mine too need to replace the whole clutch kit buddy i'm going to do it. i have volvo v50 2012
You have to feather the gas when pressing the clutch in and launching from a stop.
Mine vibrates for a second, rpms drop a bit when i let go of the clutch in neutral
Worst case you might have crank walk.
My 96 Ford Probe SE has been having this issue, it only happened after a 20-30 min drive though. Almost never when just starting the car. Has anyone else replaced their clutch and gotten the issue fixed?
my truck vibrates when I turn drive off in morning only.. after thru out the day no more vibration. clutch worn out?
Mne does the same
No bad sparkplug
What does it mean for instance,u your in 5th gear and your car wont go past 70miles per hrs then goes down to 65mph but wont reach 75mph or more?
central cal your car is slow lol
why is my car only jumping or shaking in 1st or reverse
Why my 93 honda Accord 5 speed manual trans drives while cluch is dissengaged in nutral
Shift linkage or syncros
Your in gear
Going up a hill in 3rd n 4th and slipps a sign?
My Chevy aveo 2004 was running before the master cylinder was replaced now it don’t move. In any gear, I’ve. Been stress becuz the car is my only way of working.
good video. my clutch is making a squealing noise just before it engages. According to the video there may be a problem with the throwout bearing
I know I am quite randomly asking but do anybody know a good place to stream newly released movies online?
@Spencer Hugh lately I have been using flixzone. Just search on google for it :)
@Gary Guillermo definitely, I've been using Flixzone for months myself =)
@Gary Guillermo Thanks, I signed up and it seems to work :D Appreciate it!
@Spencer Hugh No problem :D
What about shipping just in reverse
Hi, I have a mini one 1.4d I start the engine and when I press the clutch to select the gear nothing is happening, is possible to be the clutch or the slave cylinder . Thanks
I took my car to get an oil change and the garage said I needed a new clutch but I never have noticed any problems yet...
Christian an oil change ?
Its optional
Oil on clutch plate may also need a oil seal replacment
Most clutches are now self-adjusting. So it will work one day & not the text.
Sorry I said my Toyota was an audio no it’s an Auris . With a clutch that goes to the floor . Why is this ?