How to Replace Radiator 1993-1997 Ford Ranger

Buy Now!
New Radiator from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new TRQ radiator in your 1993-1997 Ford Ranger. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This repair was done on a 1996 Ford Ranger XL 3.0L Extended Cab Pickup 2-Door RWD and the process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger
Tools you will need:
• Flat Blade Screwdriver trq.video/och-...
• 10mm Socket trq.video/obB-...
• 13mm Socket trq.video/ob3-...
• 16mm Socket trq.video/ob3-...
• 8mm Socket trq.video/obB-...
• Fan Clutch Wrench
• Channel-Lock Pliers trq.video/oz-1...
• Ratchet trq.video/ocw-...
• Socket Extensions trq.video/ob3-...
• Torque Wrench trq.video/oa7-...
• Drain Pan
Subscribe: / @trq
Check out our playlist:
Ford Ranger 2nd Generation 1993-1997: • Ford Ranger 2nd Genera...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@reffan2204]

Thanks for posting...I'd have replaced the radiator hoses since you are almost there. But glad you mentioned it.

[@adriannolasco8056]

What happened to the part about reinstalling the tension belt?

[@alexmendoza7665]

Thanks man ,you made the process that much easier !!!👍👍

[@arnieanime2792]

I purchased a Radiator from 1AAuto and after replacing it and purging the system of air, the Transmission lines started leaking ATF. I know I screwed on both lines straight and all the way.
Do the fittings on the radiator come loose? If so then that'll be an easy fix. But if they come defective, I am definitely giving you guys a terrible raring and never buying again.

[@jimmywilson1388]

I got a radiator a few years ago from advance auto parts and it’s leaking antifreeze from around the transmission cooler lines…🤦🏻 I guess I’m finally gonna fix it. I was hoping this truck was automatic so you might address any issues like that… I think I’m just gonna take it lose and put a little bit of ultra gray around it and tighten it back up. Idk if it’s supposed to have an o ring in there or what..

[@cbcb2960]

Question say i got a 1985 ford ranger but it has a 347 stroker going in it what radiator should i drop in it... having a hard time getting details

[@georgemanley6421]

I replaced the radiator in my 00 ranger and didn't do half that stuff

[@zerostarfree]

transmission line upper is leaking, it has fittings, but the transmission line goes into radiator without fitting, ill try with fitting, next, you skipped that part

[@GeorgeTanner-r7k]

Why take battery out …drive belt??

[@JaredVarden]

Go ahead and do this and go ahead and do that. Be sure to go ahead and be careful to go ahead and go ahead and remove the radiator.

[@chrisking-kf3qz]

And you didn’t actually show loosening the fan clutch horrible video