For anyone looking to remove the right wheel, it is the same process as the left except you have to remove the brush motor. That is the silver cylinder that is blocking the inner right wheel screw. To remove the brush motor assembly, there is one screw which you can clearly see and is easy to access, then you can easily pull the assembly out. HOWEVER, be sure to remove the “ninth” screw on the bottom/underside of the unit (where he mentions removing the 8 screws in the video). That ninth screw is more visible than the eight others and secures the brush motor from the underside.
What do you do if the tensioner spring of the wheel, which keeps the wheel pop out when deebot is turned upside is.. Not functioning / the pop up doesn't happen. Will this harm functioning of deebot?? What's replacement cost of same?
Thanks for such a great video. I am having an issue where my T8 goes in cicles (right motor not functioning properly) I watched your take apart video and removed the right wheel. I didn't see any burn marks so I attached a 18650 battery with leads to the motor and the motor and wheel were functioning. There was no debris stuck that would affect the rotation. I put it back together and same issue. Any ideas what could be going on? I just tried covering the drop sensors and turning the vacuum upside down and turning it on. Both motors work. The right one feels stronger than right.
Is it turns very fast to one side I mean faster than normal spead....n then reverse also sometimes very fast n start giving error...if like this that means motor ok but counter sensor faulty... that's why turn very fast....
If it just move normal Spead n then suddenly start turning in circles so that means motor became harder than other side...if u can find same motor just replace..will be ok
I purchased T8+ (T8+ only sold by Bestbuy) since 2019 and worked very well for vacuuming and mopping...battery stays strong/charged/discharged very well...I purchased pro mopping module once $99 and another discounted $69 ,,,,and filled them up and purchased re-useable mopping pad aftermarket and WORK very well (really wish to have some kind like mopping pad auto clean and refill but too expensive to go with lol PLUS i have bestbuy 4 years accidental damange cover hopefully to replace before the extended warranty expired!) Hahaha...T8 works very very well ,,,no more temptation to go for expensive auto fill/clean gen..until mine's broken yes!
Hello bro, My deebot rotating in a circle anticlockwise. If I reboot the deboot, it works for 10 to 15 min, and then it will go in circles. I check wheels are okay, What will be the issue. Thanks
Sir you need to contact Ecovacs hotline no..they can provide all these details...but if u can buy wheel online...then can repair at home... through my videos...
Actually wheels will stop automatically if there's something wrong with any part....once the deebot stop so it gives a voice error message...that why deebot stop...see weather its giving wheel is stuck or related to wheel error or something else....
@@ecovacstechnicalsupport5278 This deboot says" please help me out" ! Checked the wheels, brush with no issues. The bit of LDS was spinning as well. Suspect it happened when it managed to wedge itself under a sofa edge and git stuck for a long time.
Plz check underneath the top cover LDS assembly is turning or not when you pressed auto button....in this model most likely is LDS belt break that's all....need to replace belt only
If repair you mean replace motor then ok .. otherwise no way to replace tiny motor carbon... Moto damage.... that's why if not full assembly then at least motor replace still ok...can use
For anyone looking to remove the right wheel, it is the same process as the left except you have to remove the brush motor. That is the silver cylinder that is blocking the inner right wheel screw. To remove the brush motor assembly, there is one screw which you can clearly see and is easy to access, then you can easily pull the assembly out. HOWEVER, be sure to remove the “ninth” screw on the bottom/underside of the unit (where he mentions removing the 8 screws in the video). That ninth screw is more visible than the eight others and secures the brush motor from the underside.
Thank you for the response and detailed description, 👍👍👍
Welcome
Thank you for the information I have a yeedi vacuum with the same problem . Now to find info on how to disassemble .
Is simple...just remove all screw bumper etc n lift Up top cover...plz remember bumper is fixed with top cover
What do you do if the tensioner spring of the wheel, which keeps the wheel pop out when deebot is turned upside is.. Not functioning / the pop up doesn't happen.
Will this harm functioning of deebot??
What's replacement cost of same?
Thanks for such a great video. I am having an issue where my T8 goes in cicles (right motor not functioning properly) I watched your take apart video and removed the right wheel. I didn't see any burn marks so I attached a 18650 battery with leads to the motor and the motor and wheel were functioning. There was no debris stuck that would affect the rotation. I put it back together and same issue. Any ideas what could be going on?
I just tried covering the drop sensors and turning the vacuum upside down and turning it on. Both motors work. The right one feels stronger than right.
Is it turns very fast to one side I mean faster than normal spead....n then reverse also sometimes very fast n start giving error...if like this that means motor ok but counter sensor faulty... that's why turn very fast....
If it just move normal Spead n then suddenly start turning in circles so that means motor became harder than other side...if u can find same motor just replace..will be ok
I purchased T8+ (T8+ only sold by Bestbuy) since 2019 and worked very well for vacuuming and mopping...battery stays strong/charged/discharged very well...I purchased pro mopping module once $99 and another discounted $69 ,,,,and filled them up and purchased re-useable mopping pad aftermarket and WORK very well (really wish to have some kind like mopping pad auto clean and refill but too expensive to go with lol PLUS i have bestbuy 4 years accidental damange cover hopefully to replace before the extended warranty expired!)
Hahaha...T8 works very very well ,,,no more temptation to go for expensive auto fill/clean gen..until mine's broken yes!
Hello, mine work for 5 mins and got message "unable to move further" it's seem intermitent. it is the wheels too ?
Sirji, is it available original main brush cover of Ecovacs Deboot T8 online?
Hello. My deboot ozmo t8 got stuck with the carpet and have a loud and sharp sound. Do you think the problem is the main brush? Thanks.
Hello bro, My deebot rotating in a circle anticlockwise. If I reboot the deboot, it works for 10 to 15 min, and then it will go in circles.
I check wheels are okay, What will be the issue. Thanks
Did it solve this problem. What fid you do
Thank you sir
Where do you get these parts?
Actually I'm working with Ecovacs in Malaysia since 2015...all these videos shoot in service center where we work....
Please let me know the authorized service center in Dubai. Also from where we can purchase the wheel assembly?
Sir you need to contact Ecovacs hotline no..they can provide all these details...but if u can buy wheel online...then can repair at home... through my videos...
Both the wheels of ozmo 920 have stopped at the same time. Wonder if it is just wheels or motherboard. The brush works well. Any help?
Actually wheels will stop automatically if there's something wrong with any part....once the deebot stop so it gives a voice error message...that why deebot stop...see weather its giving wheel is stuck or related to wheel error or something else....
@@ecovacstechnicalsupport5278 This deboot says" please help me out" ! Checked the wheels, brush with no issues. The bit of LDS was spinning as well. Suspect it happened when it managed to wedge itself under a sofa edge and git stuck for a long time.
Do you have Deboot M90 pro new wheels?
This model we are not selling in Malaysia buy if u can send me your deebot wheel pics then can find for you.,can WhatsApp 00601137973018
Hi my DEEBOT Ozmo 900 both of the wheels doesnt moves at all when the cleaning command starts…could this be the gear wheels problem..thanks in advance
Plz check underneath the top cover LDS assembly is turning or not when you pressed auto button....in this model most likely is LDS belt break that's all....need to replace belt only
@@ecovacstechnicalsupport5278 thanks 👍 for the advice
Can I send my deebot to you for repair?
Can u repair our deebot.....it has wheel issue
If you are in Malaysia then most welcome..plz WhatsApp me 01137973018.
You can bring it to me I'll fix for you
This is great advice. But your technicians only give one solution - replace wheel. They should also attempt repairing it
If repair you mean replace motor then ok .. otherwise no way to replace tiny motor carbon... Moto damage.... that's why if not full assembly then at least motor replace still ok...can use
@@ecovacstechnicalsupport5278 how to remove the wheels?
@@prakashrnair 2 videos available on my channel...how to disassemble & assemble back in 2 parts available... will be helpful for you