Great info, thank you! I just received a refurbished X1 which was a replacement for my original under warranty. After only the second use it is giving me the drop sensor error. Should I be concerned that it has a pre-existing issue?
No need to accept refurbished replacement...you paid for new item. Got warranty.. better request them to fix this issue...in Omni mostly motherboard also need to replace with anti drop sensor
Very useful info in these videos my only problem is you never go through the process of how to the disassemble the robot so that we can get to these parts.
This is great. Thank you for the video. Is the sensor just a closed or open circuit that could be bypassed by connecting or separating the wires? I have no drop-offs on my floor and would like to disable this feature. It is seeing large black spot patterns on my rug as a drop-off.
@@ecovacstechnicalsupport5278isnt is possible to solder the right resistance instead of the anti drop sensor, because the correct sensor isn't available for my device
Thank you for this video, but I would like to know how to remove the bumper so I can get to the sensors. Also, where can I get replacement sensors? I did get all the way to the bumper but couldn't figure out how to get the bumper off. I undid all the screws but was afraid to pull too hard on the bumper because it might break. I have a Deebot T8 AIVi, so it also has a front-facing camera. Any help you could give me would be a great help. Especially where to get replacement sensors. Thank you.
Bumper removal is bit critical. There are two small size screws on the top of camera assembly. you need to use very small screw driver to remove it. I believe this it a dust cover for the camera. Be aware of the Lidar wires and front bumper wires when you de-assemble. You can repair the sensor if you cannot find it in local market. Its just IR LED 3mm transmitter / receiver.
Hi..yes Mr sujeewa Just fixed his deebot T8AIVI in Sri Lanka if I'm not wrong..& I'm really feeling happy to know once any user Fix his unit with getting help from my videos...
@@ecovacstechnicalsupport5278 You should own the best technical resource award for Ecovacs for sharing this knowledge.You are unintentionally reduce the number of support tickets for them.
Very helpful. Would you be able to make a video of how to disassemble the bottom and top part? Because in your video this is directly to the part of the camera.. I dont know how to Opening its engine parts
This is very helpful. I would like to see part two of this video which explains how to check anti-drop sensors and front bumper sensors using a multi meeter. I hope it will help someone in future
I'm really happy to hear this comment...I already updated a video last year about this mater...no need even multi meter just with using mobile camera u can test weather anti drop sensors n front bumper sensors working or not...
@@ecovacstechnicalsupport5278 Yes I checked it. Can you guide me why this is happening this is one year old machine and carefully maintained. Deebot t8 aivi runs in left , right circles and complaining please clean anti drop sensors. Sometimes gives the message front bumper stuck drive.google.com/file/d/1s1StQlPRLIWkuuZmf2t12UUH_6ObnMxD/view?usp=drivesdk
@@ecovacstechnicalsupport5278 I have Deebot T8. Any idea about how many sensors will be there on front bumper. I see only two sensor on both ends of bumper for my deebot.
I fixed it. There was no cleaning issue or corrosion on mine. The IR-sensor in the front bumper gets broken. There are 4 sensors on each side of the cleaner robot. 3 bottomsensors and one front/side sensor located in the bumper. 1. Check with a digital camera which side of the bottom sensors does not shine. 2. Remove the front bumper and replace the IR-side-holder assembly. Or open the assembly and replace the 3mm IR-diode. (not sure whether it is 850nm or 940nm) Good luck.
While I love this product, can we say that this is a design fault as sooner or later it is very likely to have these anti-drop sensors rust or become faulty because water or moisture is likely to affect them? Is there any way of fixing it - beyond warranty period?
Hello, i've once opened my t8 and i "managed" to fix. Unfortunately after a few rounds the error came back and stopped working. I checled the sensors video with my camera ( as on your previous videos shown) and they are all working. The only thing i noticed there is a slight scratch on the window on one of them. Can that be the problem?? I tried to look for some sensors but i can' t get them anywhere. Any idea?? Thanks. Great clips by the way
Hey I just bought last month ecovac N10 plus, and it gave me the error for cleaning the drop sensor once. It's still in the warranty. Should i ask them to change the whole machine or 1 time error fine? There will be no harm for using it later? Or if that happened already, it can make the machine rusty someday?
@ecovacstechnicalsupport5278 it gave me the error that anti drop sensor covered with the dust please clean and it happened only once. But my house is very clean and only 2 people living no dust nothing was there. Thats why I was concerned. Is this fine still?
I just purchased a T8 and got this issue in the first boot -_- Will be seeking a replacement. However I'm afraid that I might run into this issue later on.
Hey there, I replaced all 6 sensors with original parts and still get the same error to clean my anti drop sensors :( What else can I do? Could it be mainboard which is causing the trouble? Any help appreciated, greetings Thomas
I checked the 4 little sensors on the wire below the lds cover with a multimeter, when pushing one of the little buttons the continuity test is ok, I suppose the sensors are fine then. Any other ideas?
I did a last try and ordered a new mainboard… holy moly this solved the problem finally for me, the repair all in all was not that cheap and it costed me a lot of time but it was still cheaper than getting a used one at ebay… thanks a lot for these videos here encouraging me to try it… if I knew that you can check if the infrared drop sensors work with your smartphone camera i could have saved some money and a lot time to go straight for the new board, just saying in case somebody is also willing to solve the problem by himself… have a nice evening everybody
Actually we also can not confirm 100% that its just a anti drop sensors issue...some time I replace all seasons still deebot gives same error then last choice is to replace main board
I keep getting the “please clean my anti-drop sensors” error message but I checked the robot inside out. There is no rust or water damage anywhere, sensors are very clean. I also did the test with the camera and see that all 3 sensors on the right side have no red light. What do you think could be the problem? The connections look tight and fine. I don’t have service centres near me and the machine is only 2 years old. I don’t want to create more waste if I can fix it myself. I have Deebot 950
I have the same exact issue with the same Deebot 950. I thought it was an issue with the bumper, got a remplacement, and still, so the problem is not the bumper. If I reverse he connectors on the bumper, all the sensor will light up, so it is a very strange issue.
Hi, Same problems @ my deepot, I changed all sensors, the three right sensors doesn't work. I tested with my mobile phone. I hope someone can Help as soon as possible.
Followed this guide but I'm having different results. Everything looks completely clean but the drop sensors on one side are not turning on. When looking at them with my phone I don't see them light up. Other side lights up ok though. Also see some 15 volt as well as 3.3 volt on some of the wires on the side that works. On the faulty side I only see 3.3 volt. Any idea what might be going on here?
Anti drop sensors some time with physical eyes we can not see..but might be short circuit etc...just need to replace Anti drop sensors.. hopefully will be ok
@@ecovacstechnicalsupport5278 Thanks for your reply. Greatly appreciated.I did some more testing. When I connect the non working sensors to the connector on the other side of the main board they actually work. So sensors are ok. Also tested the voltages coming out of the connector and they are different from the working side. Visual inspection of the main board doesn't show any obvious faults. Not really sure where to go from here.
@@rajackar did you find out something its exactly the same for me. No rust or anything. All sensors on one side light up but not the other ? Tried to switch the cables from front bumper from right to left and now all sensors light up but still same error. 😮
Hey, thanks for the video. My deebot 950 was asking me to clean the anti drop sensors and I exchanged them all, front and both sides, but the problem continues. Do you know what else can it be?
On top got LDS Cover...plz open it... underneath the cover you will find in front side 3 tiny screw... remove those n lift up the small black sensors cover... underneath you will find one long wire with 4 small sensors.. sometimes those sensors become rusty...u can test with multi meter weather ok or not... hopefully will work
Thanks for the video is there any way to disable anti drop sensors? My n8 the sensors become dirty from inside the glass and when it's cleaning the carpet it always stop and tell me to clean the sensor but on hard floors it working great
Actually you might be used some oily liquid to Clean that anti drop sensors glass that's why when run on carpet dust stick there n gives error...need to wipe with soft cloth...or u can replace inner sensors only..will be ok
I have a problem with the anti-drop sensor on my Deebot Ozmo 900, I have checked and all the sensors are clean. So I would like to proceed to replace the damaged sensor, could you tell me which is the exact replacement? Thank you very much in advance, you do a great job
I. This model there are different veriations available... sensors all same just the length of the wire is different..so plz check properly which size you want to order...2 different size available
@@ecovacstechnicalsupport5278 Thank you very much for your response, so I think the best option will be to buy the one with the longest cable, this way I can make sure that the size will always be enough
Hi Bro.. Very useful info. I am repeatedly getting this anti-drop error and along with that, the "Bumper is stuck" error.. If out of warranty, is it worth repairing?
Error msg appears in mobile app that plz clean my anti drop sensors??? Means might be Sensors too dusty or dust stick there or it's damage....u can try to clean first if still same then need to replace that sensors
@@ecovacstechnicalsupport5278 Same model/year and same situation. Mobile app says to clean sensors. Sensors are clean (no visible rust or damage), but they do not appear to be working when checking with my phone camera (no red light). Any advice is appreciated. Thanks!
New, 1-day old, T-20 OMNI to replace R95. It ran for 20 min then got the Anti Drop Sensor message. Followed instructions to wipe sensors but still doing it. Now what?
Yes plz check at my channel...there r 2 videos available..how to disassemble & how to assemble back...if you watch those 2 videos.. you will be able to open n fix back a deebot
U can try first manually with mobile camera.. check the sensors...there a video available how to check the sensors at home.... normally left side sensors always gives error
Actually it's not every time due to water damage... electronic component can be short circuit, dusty or just burn n stop working...other reasons also possible...but most likely is left side anti drop sensors spoil...u can try to replace that side...I hope will fix
Mine also the same issue. All anti drop sensors took out, pry open the case and inside looks in good condition. Cleaned and still refuse to work. When on the robot, it stay still and give a sound notification "please clean my anti drop sensor" Model 950 series
Great video thks. So basically the deebot is not fit for purpose, terrible design....... I've used the mop feature once and now have this error after ensuring everything is spotlessly clean 🤦♂️🤦♂️🤦♂️🤦♂️
Faulty sensor. Is that operator misuse? Or just bad design? More importantly, why must consumers pay once when we buy the unit, then pay again to have design flaws repaired?
WTF !!! Faulty design and this video doesn’t help with anything!!! My vac is only 3.5 months old and it’s giving this error message!!! Where do we go???
With such a design flaw, its like bound to pay for a new robo after every one year 😂 Why ecovacs haven't been able to address this issue? Or does ecovacs have any model where they dont have such faulty design
Great you're so professional to explain easly the failure. Good job and keep going
Thanks alot
Sounds like a design issue, where you prevent water drip into the cavity or seal the crimp with water-resistant plastic or gel in the crimp.
Thank you very much 😊😊😊
Where do I buy anti drop sensors? Pretty proficient at taking it apart just can not find website to buy sensors
Great video
I would love to know how to repair the sensors
Thanks very much.
Your the best
Thankyou from Australia
Great info, thank you! I just received a refurbished X1 which was a replacement for my original under warranty. After only the second use it is giving me the drop sensor error. Should I be concerned that it has a pre-existing issue?
No need to accept refurbished replacement...you paid for new item. Got warranty.. better request them to fix this issue...in Omni mostly motherboard also need to replace with anti drop sensor
I'll reach out to them. Thank you very much for your reply!
Very useful info in these videos my only problem is you never go through the process of how to the disassemble the robot so that we can get to these parts.
In few days I will upload a video on this topic ... thanks for reminding
@@ecovacstechnicalsupport5278 when can we expect that video? it would be very appreciated
@@Fragler01 nowadays quite bzy... but I'll try my best to do ASAP
@@ecovacstechnicalsupport5278 thanks 🙏
This is great. Thank you for the video. Is the sensor just a closed or open circuit that could be bypassed by connecting or separating the wires? I have no drop-offs on my floor and would like to disable this feature. It is seeing large black spot patterns on my rug as a drop-off.
Without Anti drop sensors deebot won't move...& It's very dangerous.. because deebot will fell down from stairs if there's no sensors...
I don't have any stairs in my house, it's all flat. So we can't bypass them at all? @@ecovacstechnicalsupport5278
@@ecovacstechnicalsupport5278isnt is possible to solder the right resistance instead of the anti drop sensor, because the correct sensor isn't available for my device
@@ecovacstechnicalsupport5278 he explained, that he has no stairs. So the answer would be greatly appreciated. Is it normally open or normally closed?
Thank you for this video, but I would like to know how to remove the bumper so I can get to the sensors. Also, where can I get replacement sensors? I did get all the way to the bumper but couldn't figure out how to get the bumper off. I undid all the screws but was afraid to pull too hard on the bumper because it might break. I have a Deebot T8 AIVi, so it also has a front-facing camera. Any help you could give me would be a great help. Especially where to get replacement sensors. Thank you.
Bumper removal is bit critical. There are two small size screws on the top of camera assembly. you need to use very small screw driver to remove it. I believe this it a dust cover for the camera. Be aware of the Lidar wires and front bumper wires when you de-assemble. You can repair the sensor if you cannot find it in local market. Its just IR LED 3mm transmitter / receiver.
Hi..yes Mr sujeewa Just fixed his deebot T8AIVI in Sri Lanka if I'm not wrong..& I'm really feeling happy to know once any user Fix his unit with getting help from my videos...
Tomorrow I'll prepare a video for T8AIVI...n upload...I'll show how to remove bumper n refix
@@ecovacstechnicalsupport5278 You should own the best technical resource award for Ecovacs for sharing this knowledge.You are unintentionally reduce the number of support tickets for them.
@@ecovacstechnicalsupport5278 Did you do a video for how to remove the bumper on the T8AIVI? Thanks
Hello good afternoon brother ✨
Excellent great information 💐💐
Good work tq Sharing 🇲🇾🇲🇾💐💐
Stay connected ✨
Thanks for such a nice comment...
Very helpful. Would you be able to make a video of how to disassemble the bottom and top part? Because in your video this is directly to the part of the camera.. I dont know how to Opening its engine parts
Next week I'll shoot video about this topic
@@ecovacstechnicalsupport5278 Is this video already ready? I would also like to watch it
I get this warning on dark carpets wish I could turn off sensors as on ground floor. Any ideas?
Nice taking ❤❤❤
This is very helpful. I would like to see part two of this video which explains how to check anti-drop sensors and front bumper sensors using a multi meeter. I hope it will help someone in future
I'm really happy to hear this comment...I already updated a video last year about this mater...no need even multi meter just with using mobile camera u can test weather anti drop sensors n front bumper sensors working or not...
@@ecovacstechnicalsupport5278 Yes I checked it. Can you guide me why this is happening this is one year old machine and carefully maintained. Deebot t8 aivi runs in left , right circles and complaining please clean anti drop sensors. Sometimes gives the message front bumper stuck
drive.google.com/file/d/1s1StQlPRLIWkuuZmf2t12UUH_6ObnMxD/view?usp=drivesdk
@@ecovacstechnicalsupport5278 I have Deebot T8. Any idea about how many sensors will be there on front bumper. I see only two sensor on both ends of bumper for my deebot.
I fixed it. There was no cleaning issue or corrosion on mine. The IR-sensor in the front bumper gets broken. There are 4 sensors on each side of the cleaner robot. 3 bottomsensors and one front/side sensor located in the bumper. 1. Check with a digital camera which side of the bottom sensors does not shine. 2. Remove the front bumper and replace the IR-side-holder assembly. Or open the assembly and replace the 3mm IR-diode. (not sure whether it is 850nm or 940nm) Good luck.
Thanks for informing...I hope customers can get help from these details
I will try this
What for Ir recipient diode can you recommend? Or what information is important for buying
While I love this product, can we say that this is a design fault as sooner or later it is very likely to have these anti-drop sensors rust or become faulty because water or moisture is likely to affect them? Is there any way of fixing it - beyond warranty period?
Plz let me which model u r using & what's the issue ..plz send a video clip will be easy for me to confirm..00601137973018
Very helpful thank you
Hello, i've once opened my t8 and i "managed" to fix. Unfortunately after a few rounds the error came back and stopped working. I checled the sensors video with my camera ( as on your previous videos shown) and they are all working. The only thing i noticed there is a slight scratch on the window on one of them. Can that be the problem?? I tried to look for some sensors but i can' t get them anywhere. Any idea?? Thanks. Great clips by the way
HI. How much your sensor cost? I can buy
Sensors can check online.. should be available... different reign different prices...in Malaysia is 65 RM one side sensors
Are you in Malaysia?
Hello. Many thanks. I was changed anti drop sensors but deboot is still says -please clean my anty drop sensor. Any problem is theare?
Hey
I just bought last month ecovac N10 plus, and it gave me the error for cleaning the drop sensor once. It's still in the warranty. Should i ask them to change the whole machine or 1 time error fine? There will be no harm for using it later? Or if that happened already, it can make the machine rusty someday?
If only once it happened then ok ..but if daily give same error then sensors are faulty
@ecovacstechnicalsupport5278 it gave me the error that anti drop sensor covered with the dust please clean and it happened only once. But my house is very clean and only 2 people living no dust nothing was there. Thats why I was concerned. Is this fine still?
I just purchased a T8 and got this issue in the first boot -_- Will be seeking a replacement. However I'm afraid that I might run into this issue later on.
Ok plz contact with seller I hope he will replace
Hey there,
I replaced all 6 sensors with original parts and still get the same error to clean my anti drop sensors :( What else can I do? Could it be mainboard which is causing the trouble? Any help appreciated, greetings Thomas
I checked the 4 little sensors on the wire below the lds cover with a multimeter, when pushing one of the little buttons the continuity test is ok, I suppose the sensors are fine then. Any other ideas?
I did a last try and ordered a new mainboard… holy moly this solved the problem finally for me, the repair all in all was not that cheap and it costed me a lot of time but it was still cheaper than getting a used one at ebay… thanks a lot for these videos here encouraging me to try it… if I knew that you can check if the infrared drop sensors work with your smartphone camera i could have saved some money and a lot time to go straight for the new board, just saying in case somebody is also willing to solve the problem by himself… have a nice evening everybody
May I know ur model no sir??
Actually we also can not confirm 100% that its just a anti drop sensors issue...some time I replace all seasons still deebot gives same error then last choice is to replace main board
@@ThomasP-he1zq is yours deebot ozmo 950. And where did you get a mother board at :)
I keep getting the “please clean my anti-drop sensors” error message but I checked the robot inside out. There is no rust or water damage anywhere, sensors are very clean. I also did the test with the camera and see that all 3 sensors on the right side have no red light. What do you think could be the problem? The connections look tight and fine. I don’t have service centres near me and the machine is only 2 years old. I don’t want to create more waste if I can fix it myself. I have Deebot 950
I have the same exact issue with the same Deebot 950. I thought it was an issue with the bumper, got a remplacement, and still, so the problem is not the bumper.
If I reverse he connectors on the bumper, all the sensor will light up, so it is a very strange issue.
@@CLAYPOOLALAMENOSUNO Did you manage to fix it please
@@Miros8111 Sadly, no. I took it to a tech last week, still no news.
Hi, Same problems @ my deepot, I changed all sensors, the three right sensors doesn't work. I tested with my mobile phone. I hope someone can Help as soon as possible.
Hi the mainboard is broken. sorry for that late answer
Followed this guide but I'm having different results. Everything looks completely clean but the drop sensors on one side are not turning on. When looking at them with my phone I don't see them light up. Other side lights up ok though.
Also see some 15 volt as well as 3.3 volt on some of the wires on the side that works. On the faulty side I only see 3.3 volt. Any idea what might be going on here?
Anti drop sensors some time with physical eyes we can not see..but might be short circuit etc...just need to replace Anti drop sensors.. hopefully will be ok
@@ecovacstechnicalsupport5278 Thanks for your reply. Greatly appreciated.I did some more testing. When I connect the non working sensors to the connector on the other side of the main board they actually work. So sensors are ok.
Also tested the voltages coming out of the connector and they are different from the working side.
Visual inspection of the main board doesn't show any obvious faults. Not really sure where to go from here.
@@rajackar did you find out something its exactly the same for me. No rust or anything. All sensors on one side light up but not the other ? Tried to switch the cables from front bumper from right to left and now all sensors light up but still same error. 😮
@@MrJann5089 Sorry man. Spent some serious time measuring and fiddling around but couldn't get it to work.
Bought a new one. Not evovas of course
@@rajackar okay i was Thinkingto buy a mother board to get it Working again :)
Shall we wipe the sensor and try before replacing the sensor? does it work?
I changed both drop sensors. I have still the same Problem: Clean drop sensors. What could I do ?
Front sensor, then check bumper light with mobile cam...under LDS cover the small top cover there are tiny sensor that also called anti drop sensor
Check top cover tiny sensor attached with black wire wether rusty or not if not rusty then should be ok
Where your shop
Brother where are you from where is your repair shop
I'm in Malaysia bro.... how can I help you.... which model you are using what's the issue
@@ecovacstechnicalsupport5278 May I know where is your shop? I have problem with anti drop sensor. How much does it cost to replace it?
I'm in Malaysia..if you want to contact you can WhatsApp at 00601137973018
Nice information,please reply me where is the service centre of this robot in India!
In Mumbai...plz contact Ecovacs hotline no they will provide all details about service center
@@ecovacstechnicalsupport5278: I live in Bangalore. How to get it fixed via service centre?
Thanks. I live near the ocean and have high humidity in the house. So old say my sensor is rusted because I’ve cleaned it many times.
Hey, thanks for the video. My deebot 950 was asking me to clean the anti drop sensors and I exchanged them all, front and both sides, but the problem continues. Do you know what else can it be?
On top got LDS Cover...plz open it... underneath the cover you will find in front side 3 tiny screw... remove those n lift up the small black sensors cover... underneath you will find one long wire with 4 small sensors.. sometimes those sensors become rusty...u can test with multi meter weather ok or not... hopefully will work
Hello did you find out what to do, i have exactly same issue :)
Where did you find the anti drop sensors?
Thanks for the video is there any way to disable anti drop sensors? My n8 the sensors become dirty from inside the glass and when it's cleaning the carpet it always stop and tell me to clean the sensor but on hard floors it working great
Actually you might be used some oily liquid to Clean that anti drop sensors glass that's why when run on carpet dust stick there n gives error...need to wipe with soft cloth...or u can replace inner sensors only..will be ok
I have a problem with the anti-drop sensor on my Deebot Ozmo 900, I have checked and all the sensors are clean. So I would like to proceed to replace the damaged sensor, could you tell me which is the exact replacement?
Thank you very much in advance, you do a great job
I. This model there are different veriations available... sensors all same just the length of the wire is different..so plz check properly which size you want to order...2 different size available
@@ecovacstechnicalsupport5278 Thank you very much for your response, so I think the best option will be to buy the one with the longest cable, this way I can make sure that the size will always be enough
Hi Bro.. Very useful info. I am repeatedly getting this anti-drop error and along with that, the "Bumper is stuck" error.. If out of warranty, is it worth repairing?
Actually sensors replacement won't be very expensive....once Fix then can use again Will be better
I have N79S from 2018, doesn't have water tank?... Still getting this antidrop sensor malfunction, please advise.
Error msg appears in mobile app that plz clean my anti drop sensors??? Means might be Sensors too dusty or dust stick there or it's damage....u can try to clean first if still same then need to replace that sensors
Plz WhatsApp a video at +601137973018
I'll see the video n let you know how you can sattle
@@ecovacstechnicalsupport5278 Same model/year and same situation. Mobile app says to clean sensors. Sensors are clean (no visible rust or damage), but they do not appear to be working when checking with my phone camera (no red light). Any advice is appreciated. Thanks!
If all my sensors are ok, i checked its by phone camera (see IR light), is there any chance to fix it manyally? Maybe by updating FW?
The receiver could be broken
New, 1-day old, T-20 OMNI to replace R95. It ran for 20 min then got the Anti Drop Sensor message. Followed instructions to wipe sensors but still doing it. Now what?
Sorry for late response... might be Anti drop sensors faulty..need to replace or can contact direct to service center they can help you
where i can get driving wheel ?
Where are you located?
g.co/kgs/psDcyn
Just search this address in google.all details are there...or just write
Deebot repair & Service center
I'm staying in Batu cave Malaysia
If u r in Malaysia then can contact at 01137973018
I clean mine, gently, with some windex and soft toilet paper.
Great..
Do you have a video how to open Deebot step by step?
Yes plz check at my channel...there r 2 videos available..how to disassemble & how to assemble back...if you watch those 2 videos.. you will be able to open n fix back a deebot
After cleaning also it says the same error. How to rectify the error
U can try first manually with mobile camera.. check the sensors...there a video available how to check the sensors at home.... normally left side sensors always gives error
Where can buy the anti drop sensor
Plz read my comments under Anti drop sensors video...I already mentioned few times
Hello,
I need to buy one back antidrop sensor to my Ecovacs DN-36.
Do you know where is it possible to buy it online? Do you sell it?
Thanks
Can plz WhatsApp 00601137973018
I never used my deebot T8 for mop, it still has got anti drop sensor issues
Actually it's not every time due to water damage... electronic component can be short circuit, dusty or just burn n stop working...other reasons also possible...but most likely is left side anti drop sensors spoil...u can try to replace that side...I hope will fix
I opened my robot cleaned all the antidrop sensors. Still the problem persist.
Plz send me a video clip at 00601137973018. I'll see n let you know what's the issue
Mine also the same issue.
All anti drop sensors took out, pry open the case and inside looks in good condition. Cleaned and still refuse to work.
When on the robot, it stay still and give a sound notification "please clean my anti drop sensor"
Model 950 series
Great video thks. So basically the deebot is not fit for purpose, terrible design....... I've used the mop feature once and now have this error after ensuring everything is spotlessly clean 🤦♂️🤦♂️🤦♂️🤦♂️
I got moisture in the anti drop sensors which I cleared with a hair dryer .
If it start working then ok good 👍
@@ecovacstechnicalsupport5278 Yup, just humidity in the house. Took me a while to figure out, but its fine.
Faulty sensor. Is that operator misuse? Or just bad design? More importantly, why must consumers pay once when we buy the unit, then pay again to have design flaws repaired?
Are u based in Uae
Kuala Lumpur Malaysia
My friend where are you living right now?
Kuala Lumpur Malaysia 😊
How to open it
Need to remove top cover bottom chassis battery then only can reach to the anti drop sensors
I'll try to make a video on this topic soon
WTF !!! Faulty design and this video doesn’t help with anything!!! My vac is only 3.5 months old and it’s giving this error message!!! Where do we go???
Plz contact with seller or local service centre...if U r in Malaysia..most welcome can bring it to me I'll fix
With such a design flaw, its like bound to pay for a new robo after every one year 😂 Why ecovacs haven't been able to address this issue? Or does ecovacs have any model where they dont have such faulty design
As a technical supervisor I can say it's not Only ecovacs..I receive all brands for repair...I just don't show those models in video...
Buyed new one
It is saying this
That's a design flaw 100%
This is hell pretty annoying it happend once per year
Sir you buy any brand.. it's normal.. sensor can be rusty or dust stick there it's normal
Stupid design made errors come