Best installation video ever... I was dreading doing a back camera and your tutorial gave me all the confidence I needed. Also saved me £100. Also bought product for me and the Mrs.. Keep up the great work.. Thank you
Excellent install video. You got to the point right away without the usual 20 minute intro alot of people do. You got my thumbs up and subscription. After watching this video i'm sure I can install this no problem. Thank you JD!
Great job! I'm doing one but as a lady. 😂 im so happy you didn't need a volt checker. The other videos make it seem so complicated. I do have an equinox so mine is different because i have to remove the pannels with a bolt twister thing.
Thank you my friend for showing us how to install this camera it's the best I just bought it but with your help I'll be safe unbelievable demonstration thank you so much I do recommend this to anybody it's not hard to do is very easy I install my already ready to to set up a mirror and very happy with this camera thank you once again my brother's going to get one I'm going to show him
Awesome video!!! Nothing left out on each sequential step. Most definitely the most comprehensive, and detailed DIY I've seen. Thank you, my new camera works perfectly... ⭐⭐⭐⭐⭐
The Pelsee P12 was easy to install, took less than 90 minutes on a Nissan Xterra, and the performance of the product is beyond are wildest expectations. The most difficult part was in the driver's side rear in fishing the wire through the weatherized protector and connecting to the backside of the rubber wiring seal to the backup light. The rear camera was installed inside and from the top portion of the glass. The rear camera works very well. Performance is flawless, and is "transparent". When triggered, the in the mirror display is very bright. License plates are easy to read. Calibration for backup zones and monitoring blind space wasn't that difficult. I highly recommend this well engineered and fully thought out product. Be certain to buy a spare SM memory card and USB reader. I bought the 'C' thumb SM reader for my Android phone where I have the Pelsee app. for video review.
Have been thinking of getting a P12 Pro unit and this video is helpful. Question: In the P12 instructions it states to make sure that the GPS unit should have the GPS side pointing up. Did the GPS work with it being stuck backwards on the windshield?
Great video. What if I don't use the T-tap connectors? Do I just cut the red light wire, strip both ends and wire them to the rear cam wire? I know the T-taps make the installation easier, but I don't have them and don't want to wait for them to install the cam. Thanks.
Thank you for an excellent video! Is the rear camera installation necessary for the blind spot monitoring system to work? Because I'm planning to skip the rear camera installation, but would still love to have the blind spot monitoring function.
@@fuman24 very easy, the hardest part was figuring out how to remove the bumper on my Genesis Coupe. The mirror itself and the wiring was straightforward enough.
Nice presentation. One comment though. The GPS sensor should be placed on the dashboard in a horizontal position facing forward. The way you mounted it vertically on the windshield wound not work. That’s why when you turned on the car, the orientation is constantly changing from E to N to S to W, …..
You wired the camera reverse wire to the backup lights, without going into reverse to activate the rear view camera how can/does the rear view mirror see what’s behind you while driving forward? Thanks great vid btw!
I have one the rear cam is powered by the main unit (via some kind of headphone jack), it has a trigger wire but no ground - is this at risk of shorting out the reverse light? Thanks!
I would utilize the license plate to install the camera. Then I will probably go underneath the bed of the truck to run the wires. I never done a dash cam installation on a truck yet. Hopefully soon.
@JD Answers thank you! Does ADAS and BDS work simultaneously when either front or back cam are displayed? Also can the ADAS be just an alert tone or does it have to give a speech announcement?
Hello, I have the 12" Mirror strapped to my existing mirror and it's to heavy. After driving for a few minutes, I noticed my mirror can not support the weight of the smart mirror. Is there any aftermarket braces or brackets that could l help??
The dash cam covers the rearview mirror. Look at the video and it should show you how much of the rearview mirror is covered. Then you can probably tell if you will be able to see and use the buttons of your rearview mirror.
Yes, it records the front and back camera at the same time. There will be 2 separate files. One file for the front camera and another file for the rear camera.
Thanks for responding i finally figured it out.. When I'm in smart drive setting i have problems with the voice responding .. So as when to close to a vehicle, lane departure ..
Hello, my dash cam was working but for some reason, i unplugged and plugged again and now is not turning on, not with the cable c i got, but if i use a cable c to c it works wonder why
My only reasons is that the cablesl wires inside the wire might have lost connection inside the wire. Contact the company support for a new cable. I had a small issue with my dash cam and they were able to help me with the issue with no problems.
The rear camera shows traffic directly behind my right side as if it's the left side of me even though it's the right rear side of me. How do I fix it?
But what everybody cares about and what everybody wants to know is, when hardwired can this detect somebody walking around the car and start recording from both cameras?
EXCELLENT job!!! I feel very confident that I can install my new PELSEE P12 Pro now. Thank You so very much.
Thank you so much you made this look so simple! I don’t have a dad to ask these simple question. It’s always nice finding such a detailed video!
Best installation video ever... I was dreading doing a back camera and your tutorial gave me all the confidence I needed. Also saved me £100. Also bought product for me and the Mrs.. Keep up the great work.. Thank you
This is one of the best installation videos I have come across. To the point and yet detailed enough and makes one confident in doing the job.
Excellent install video. You got to the point right away without the usual 20 minute intro alot of people do. You got my thumbs up and subscription. After watching this video i'm sure I can install this no problem. Thank you JD!
The most detailed installation video I've found. Thanks
Great job! I'm doing one but as a lady. 😂 im so happy you didn't need a volt checker. The other videos make it seem so complicated. I do have an equinox so mine is different because i have to remove the pannels with a bolt twister thing.
Thank you my friend for showing us how to install this camera it's the best I just bought it but with your help I'll be safe unbelievable demonstration thank you so much I do recommend this to anybody it's not hard to do is very easy I install my already ready to to set up a mirror and very happy with this camera thank you once again my brother's going to get one I'm going to show him
Awesome video!!! Nothing left out on each sequential step. Most definitely the most comprehensive, and detailed DIY I've seen. Thank you, my new camera works perfectly...
⭐⭐⭐⭐⭐
Amazing video! Thank you for the details. The best step by step I’ve ever seen!
Thanks for the video. It definitely made me feel comfortable installing this on my own.
No problem 👍
Good Damn Installation Video JD!
I'll be installing mine in 2 days and this video will make it a Breezy!
Thanks 👍👍
The Pelsee P12 was easy to install, took less than 90 minutes on a Nissan Xterra, and the performance of the product is beyond are wildest expectations.
The most difficult part was in the driver's side rear in fishing the wire through the weatherized protector and connecting to the backside of the rubber wiring seal to the backup light. The rear camera was installed inside and from the top portion of the glass. The rear camera works very well.
Performance is flawless, and is "transparent". When triggered, the in the mirror display is very bright. License plates are easy to read.
Calibration for backup zones and monitoring blind space wasn't that difficult. I highly recommend this well engineered and fully thought out product. Be certain to buy a spare SM memory card and USB reader. I bought the 'C' thumb SM reader for my Android phone where I have the Pelsee app. for video review.
How did you connected to the phone mine say it didn’t find the camera to connect
Good job sir.step by step.thank you sir
thank you so much! your guidance makes me so confident to install the camera myself
Glad I could help!
very detailed and informative, thumbs up man
Have been thinking of getting a P12 Pro unit and this video is helpful.
Question: In the P12 instructions it states to make sure that the GPS unit should have the GPS side pointing up. Did the GPS work with it being stuck backwards on the windshield?
Great video. What if I don't use the T-tap connectors? Do I just cut the red light wire, strip both ends and wire them to the rear cam wire? I know the T-taps make the installation easier, but I don't have them and don't want to wait for them to install the cam. Thanks.
My installation is only a tutorial for individuals with little or no experience in automotive wiring. I'm sure your installation will be sufficient.
Thank you for the excellent video🙏. Because of it, I am confident to install mine
Thank you for an excellent video! Is the rear camera installation necessary for the blind spot monitoring system to work? Because I'm planning to skip the rear camera installation, but would still love to have the blind spot monitoring function.
Thanks for the vid! I'm installing mine this afternoon
How did it go??
@@fuman24 very easy, the hardest part was figuring out how to remove the bumper on my Genesis Coupe. The mirror itself and the wiring was straightforward enough.
Nice presentation. One comment though. The GPS sensor should be placed on the dashboard in a horizontal position facing forward. The way you mounted it vertically on the windshield wound not work. That’s why when you turned on the car, the orientation is constantly changing from E to N to S to W, …..
Thanks. I am excited to install mine, now
Thank you for this information, I will try to contact the back camera, it looks complicated 😢. But thank you so much ❤
Thank you so much for this helpful video
Me.gusto tu explicacion
Grate explanation ❤
Amazing tutorial! Big help!
this is great job thanks 💐
You wired the camera reverse wire to the backup lights, without going into reverse to activate the rear view camera how can/does the rear view mirror see what’s behind you while driving forward? Thanks great vid btw!
Yes, the rearview mirror will be showing the rear camera while driving forward.
Thanks@@JDWIRED
I have a 2012 Ford escape. How do I install the rear camera?
I have one the rear cam is powered by the main unit (via some kind of headphone jack), it has a trigger wire but no ground - is this at risk of shorting out the reverse light? Thanks!
No, It will not short the reverse light. I had rear dash cam that are connected to my reverse lights for 4 years and I have had no issues.
What is the name of the blue product that you connect to the red cable of the reverse camera?
T tap. It should be in the description.
Is there an extension wire for rear camara for a truck
I couldn't find one but if you rach out to them I'm sure they will help you out.
how to install without cigerrate holder socket, can we install directly via battery?
Will the backup camera work without using the hardwire kit?
Yes, the hardwire kit is only if you want to use the parking monitoring
@@JDWIRED thank you :)
No problem at all! Don't forget to subscribe for more great dash cam content!
Yes, but an OBD power supply connector is very simple to fit.
What do you do to hookup the rear camera on a truck?
I would utilize the license plate to install the camera. Then I will probably go underneath the bed of the truck to run the wires. I never done a dash cam installation on a truck yet. Hopefully soon.
Does the BDS work when the screen is off or when it goes to sleep?
When it's powered on
Yes, the BSD does work when the screen is off
@JD Answers thank you! Does ADAS and BDS work simultaneously when either front or back cam are displayed? Also can the ADAS be just an alert tone or does it have to give a speech announcement?
I need help for installing,where do you living?
Hello, I have the 12" Mirror strapped to my existing mirror and it's to heavy. After driving for a few minutes, I noticed my mirror can not support the weight of the smart mirror. Is there any aftermarket braces or brackets that could l help??
This bracket should help: amzn.to/3uFKEIV
Can you use this with a mirror that has buttons on the bottom?
The dash cam covers the rearview mirror. Look at the video and it should show you how much of the rearview mirror is covered. Then you can probably tell if you will be able to see and use the buttons of your rearview mirror.
I couldn’t hide the wires under the headliners it’s too tight and doesn’t move. Where do i hide the wires so it look more clean? 😢
How to get the updated version
Does it record rear view when driving.
Yes, it records the front and back camera at the same time. There will be 2 separate files. One file for the front camera and another file for the rear camera.
i dont like when the blindside and al i cant turn on front collition etc
When I set my time in the settings menu and go back to the home menu, the time not right. Can you help me out with this one
Is it always a certain time amount difference. For example a hou difference no matter what time you set it
Thanks for responding i finally figured it out.. When I'm in smart drive setting i have problems with the voice responding .. So as when to close to a vehicle, lane departure ..
What is the AWG for the T Tap?
I use the red T taps, which are 18 to 22 AWG
Thanks!
10:50 thoroughly research your own car, they are not all snap offs which I learnt the hard way.
Hello, my dash cam was working but for some reason, i unplugged and plugged again and now is not turning on, not with the cable c i got, but if i use a cable c to c it works wonder why
My only reasons is that the cablesl wires inside the wire might have lost connection inside the wire. Contact the company support for a new cable. I had a small issue with my dash cam and they were able to help me with the issue with no problems.
The rear camera shows traffic directly behind my right side as if it's the left side of me even though it's the right rear side of me. How do I fix it?
Use the mirror screen function to correct the issue
👍👍👍
What’s a reasonable charge for
Someone to install this for me?
$179.99 is what Best buy charges for the mirror dash cam. I would charge $75 to $100 depending where the rear camera will be installed.
But what everybody cares about and what everybody wants to know is, when hardwired can this detect somebody walking around the car and start recording from both cameras?
Hardwire is simply a power source that enables the dash cam to detect the movement.
Ehh we will see
my question is that i did not get the cable to connect the rear camera where can i get one ?
Just contact Pelsee and they will send you the cable.