its not a correct command having put under this video in the discription -missed one dash after the word "mode" and it must be fastboot oem off-mode-charge 0
You right, and it took a several minutes before i found correct command, cose i didnt saw this comment ;) BTW there is correct command in video subtitles.
Great tip. What would also be really cool is if you could set a minimum battery level before the system boots. You'd have to have a custom loader, but it would be a nice option.
Hi, I would like to set my old Samsung Grand Neo (GT-i9060) in auto-start mode as soon as the USB power is applied. This Grand Neo does not seem to have a fast boot mode, but something called download mode (ODIN MODE). I succefully installed the SDK kit 24.4.1 and opened the command window from the platform-tools. After entering the "fastboot"-command, the system is "waiting for any devices". The Grand Neo is connected to the same PC and is in download mode, but does not show in the device manager as a USB device. Can you help me out? Thanks in advance!
thanks! I had the issue where it just says "waiting for device" on the fastboot command - you just need to find the option in the fastboot menu on the phone that says something like "reboot to bootloader" and select that - then you should see your phone connect to the PC and be able run the command
Amazing video! Worked on my Moto G3 that I use as a router 4G. I always wanted to do that but thought that could be difficult, but with your video I did it less than 5 minutes.
Thanks for this! Really clear explanation. I’m researching using an old phone as an LTE solar powered security camera and would want the phone to automatically turn on when power comes back if the solar battery dies
Thank you, worked perfectly, although i had to install the whole studio as you cannot download just what is required anymore due to recent updates. Thanks again.
@@b94454hey can you help me understand something. In the video, it says dead battery creates power bootloop. Does that mean the phone must not goes to 0% battery? If not it'll be bootloop?
This command caused my phone to do a full factory reset and restart in some Chinese dialect. After cmd, fastboot said okay, thus "succesful". Fastboot reboot cmd and during reboot I received a droid icon with "deleting" under. My lollipop device took 5 minutes to boot, I feared boot loop. Root stayed in place and the phone turns on on charge. But good to be aware of the hard reset. thx
For the Car it would be also useful to turn device off when usb power is off.Reasons:1. Dont have to turn it off manually2. If connected directly to car baterry, dont drain it3. When car key is off, to dont drain the device's battery Do you have a video or toturiam with that command? Please
dude for turning off install tasker, like pcuser80 already said 8 months before your question. and if you dont want to spend 3€ for such a simple task (which i can totally understand) just search on google for tasker
I used this command: fastboot oem off-mode-charge 0 So far, I ran the battery down three times, and no problem. No fruit loops. I put it on a 2.5A charger and it boots right up.
Hi, I have Lenovo A6000 & Kitkat 4.4.4 original ROM, its Automatically Power on when USB charger is plug in..Offline charging not coming. But When i upgraded to Lolipop 5.2 Rom its charging as offline..How to fixed it? Please let me know.
I am stuck at point where i have to go to android SDK platform tools. I can not reach either that directory file or find it anywhere in my pc as well although I have downloaded and intalled it. Running the application i could not reach that point too, meaning to find that specific folder and open the command window. Any help?
hi. nice tutrorial. i have install usb drivers of samsung i9082 and it recognizes it in windows 7 (when my phone is on) and when my phone is in fastboot mode ( i have root my phone with odin 3). When i am in fastboot mode and i go to the command prompt typing adb devices , no list devices attached are showing. So i cant use the fastboot command. Any idea ? Thanks
Wondering if you know a file to modify to make phone go ahead and turn off before full discharged. This would help solve my potential bootloop issue....
Hi i managed to get all the way to this bit "fastboot oem-off-mode charge 0" which then displays a whole heap of commands available as in the syntax is not right for my device (Sony Xperia z3 tablet compact) i tested "fastboot reboot" and that rebooted my device ok , any help please
One correction to my previous reply. The Grand Neo does show in the device manager: "SAMSUNG mobile USB CDC Composite Device". However the "fastboot"-command is still waiting for a device to connect...
Hi cauchypotato, i have xiaomi MI 4I with 5.0.1 android version, what is the SDK platform tool version i can use to do auto power on programme. Is it possible on my phone?
I was able to run command (HTC M8), however it looks like it is not saved in phone memory, because every time i run this procedure start verify is 3, not 0. Is there any tip to save this command in phone ? fastboot oem off-mode-charge 0 (bootloader) Start Verify: 3 (bootloader) off-mode-charge: Change OK value=0 OKAY [ 0.063s]
Una use that in my future project to make my old smartphone plug-powered.., it about having a home-server controlled with an automation application (Tasker) so it can be controlled with sms messages when ever pre-set for that
Tried this on an old Galaxy S3 with cyanogenmod and booting to fastboot goes into the "Downloading..." screen (bootloader?). Running the command shows "waiting for device" and does noting... solutions?
it says success for me,, but.. it still doesn't turn on when usb is connected.. so I assume that leEco Le Pro 3 doesn't work using this way. i had hopes :(
NIce!!! This would be invaluable security cam with either the Alfred app or the IP Webcam app You can also solder the 5vdc wires directly to battery connection leads in the phone, normal battery at full charge is 4.2vdc...the extra .8vdc won't damage it at all Great video...thanks!!!
Nice tip. I have a phone with broken USB. Removed battery. Connected a li battery charger board to battery terminals and fed 5v to charger board. Instead I could have fed 5v directly to battery terminals.
@@desaijm You must find the pads for 5VDC and GND on the board. Some manufacturers do include some pads for machine testing, so you can easily solder to them. Try make the USB charge, then search for 5VDC on the board with a multimeter while the other probe is on GND (almost every metal part is GND) - be sure to search near the USB port for the 5VDC pad. Once found, solder it on and give it a try.
Do not supply 5v directly to a 4.2v lithium battery, even moreso not a lipo battery unless you want it to catch fire. 5v is fine if you are applying it to where the charging port 5v rail is. But DO NOT connect 5v directly to the battery. I'm just making this comment because your comment could easily be misinterpreted
you have install driver for your device like me i am using motorola so i have to install drivers for motorola then just you have to go into fastboot mode your pc can automatically download any required drivers for fastboot
Does anyone know why i'm getting this error when using fastboot oem off-mode-charge 0 ? I'm using HTC one M7. (bootloader) [ERR] Command error !!! OKAY [ 0.005s] Finished. Total time: 0.008s
How do I make it do my phone screen DOES NOT turn on when I plug it in? I can't find anything like this in the internet. I have Samsung Galaxy S6 and whenever I plug it in, it turns on, and I hate that.
You have to download Android Studio now and install SDK tool from within the menu system.. That said I cant find a folder for SDK tools in the C drive so I have no way of launching the command prompt and I have no idea how to run SDK tools standalone.. Can anybody help me?
Go to the official Android Studio page (just google android studio download) then click on the download tab< then scroll to the bottom, you should see a download for android sdk platform tools.
Dude, check the bug in your description. You are doing "fastboot oem off-mode-charge 0" but your description says "fastboot oem-off-mode charge 0" and the same shit with 1
Good day Cauchy I'm hoping you might have an idea as to why this doesn't work for me. I'll explain: I did this with my phone before following the steps in your video to create a dedicated car informant. The phone accepted the code, multiple times booted up on charge. Then I followed to steps to setup automateit, which have also all been successful. After finishing that, apparently the phone reverted back to not booting on charge...now when I enter the code in fastboot it gives the list option command list...effectively not recognizing the command. I'm at a loss and have already bricked a phone trying to sift through the system/bin files to re-code the file responsible for the charge one phone off image... I'm hoping I'm doing something wrong. Thanks in advance for your time.
Ok, so it certainly has something to do with the automateit app. I force stopped the app, turned off the phone and applied charge. It booted up by itself. The app had restarted itself, so nav open on boot and all the other rules function. Disconnected power, shuts down...plugged it back in and I only get the charge icon on screen, doesn't auto-boot. wtf?
Hi! Thanks for your video! I have a Motorola Moto G4 with Nougat. Do you think it will work with this phone? Also, does it reboot even if the phone was ON, or only while being OFF? In my case it is for a car. I would like it to power ON/boot only if it was previously OFF and ideally if the battery has been charged at least 5% or 10%.
I think Xiaomi devices have this feature. If phone turned off due to a dead battery, it will turn on automatically only after few minutes of charging. Don't know how they are doing this. Might be a feature of their recovery.
any clue how i could do this without working power and volume buttons? been living on the edge for 3 months now by just keeping my phone charged at all times lol, but i'd love for this be an option, but i can get through step 1. it's a huawei honor 10
@@Potrinio1as a temporary solution i found an setting on my phone called 'scheduled power on' and i put it at 7am, so if my phone ever dies it'll at least power on the next day if it's charged. idk if it works tho because my phone still hasn't died yet lol
Cauchupotatu New smartphone out of the box, I noticed it a few days letter ( since then I put it in its box ) I plug the Smartphone into the charger, it starts on its own - I turn it off and it off and starts on its own !? Letting it load immediately starts automatically. While it's in the charger, I turn it off ( and it automatically turns on again ) not metter how much I turn it off while it's in the charger, ON ON ON again....
Do you have a video to make the phone shut off when the USB power goes out? That way it turns on with the car and then turns off when you turn the car off.
thanks for this video. it helps my problem to solve %50. But wanna ask you; How can we set our android device to automatically safety shut down when charge plug out? If you answer these, you will solve my problem properly.... Regards
The sdk tools only is no longer available. Do you have any recent links or instructions on how to do this? Your help is appreciated! I found a link (dl.google.com/android/installer_r24.4.1-windows.exe) but when I install it it says that Java SDK is not installed while I just installed it.
I have tried this on a Lenovo tablet and it worked great but I cannot get this to work on a Samsung tab a 10.1 (sm-t510) because samsung does not have fastboot... RATS!
The problem with this is that, we have to solve to male the android shut down after being disconnected from the power source. It should solve the problem.
not sure if this question is still not answered elsewhere since it was from a year ago, but your answer is here: ua-cam.com/video/QBKD068VIjE/v-deo.html
I cant start my device... It tries to turn on ..displays manufactur's logo ..shuts down....repeats I cant enter into fastboot or recovery mode ..not enough charge to go after manufacturers logo screen... Help me plz..... Waiting for ur response
In my moto g4 play this make the phone never power off, when I press power off the phone do a reboot. Anyway, it works for me, I think... it's for a phone used as a security camera
7 years later. Perfect! Putting a custom ROM installed amazon fire tablet in my car for a custom gauge setup with tunerview. Thanks!
For those with Nexus 6P and maybe pixels the command is:
fastboot oem off-mode-charge enable
fastboot oem off-mode-charge disable
its not a correct command having put under this video in the discription -missed one dash after the word "mode" and it must be fastboot oem off-mode-charge 0
You right, and it took a several minutes before i found correct command, cose i didnt saw this comment ;) BTW there is correct command in video subtitles.
Great tip. What would also be really cool is if you could set a minimum battery level before the system boots. You'd have to have a custom loader, but it would be a nice option.
Hi, I would like to set my old Samsung Grand Neo (GT-i9060) in auto-start mode as soon as the USB power is applied.
This Grand Neo does not seem to have a fast boot mode, but something called download mode (ODIN MODE).
I succefully installed the SDK kit 24.4.1 and opened the command window from the platform-tools.
After entering the "fastboot"-command, the system is "waiting for any devices". The Grand Neo is connected to the same PC and is in download mode, but does not show in the device manager as a USB device.
Can you help me out? Thanks in advance!
thanks i guess someone did this bought a device used off ebay i was going nuts wondering why the heck it kept on booting into android
thanks! I had the issue where it just says "waiting for device" on the fastboot command - you just need to find the option in the fastboot menu on the phone that says something like "reboot to bootloader" and select that - then you should see your phone connect to the PC and be able run the command
Amazing video! Worked on my Moto G3 that I use as a router 4G.
I always wanted to do that but thought that could be difficult, but with your video I did it less than 5 minutes.
Thanks for this! Really clear explanation. I’m researching using an old phone as an LTE solar powered security camera and would want the phone to automatically turn on when power comes back if the solar battery dies
Thank you for your video. If anybody has problem on Linux with a message < waiting for any device >, try sudo.
Do you need to actually plug the usb in each time to get it to turn on, or will it recognize that there is power running through the usb cable?
Thank you, worked perfectly, although i had to install the whole studio as you cannot download just what is required anymore due to recent updates. Thanks again.
Worked with Nexus 5! , Can be Added on the List! Thank you this Method Helped to Start my Nexus 5 with Dead Power Button :)
Thanks worked on my rooted Pixel 3
does it still work on your google pixel 3? Did you use the same method as in the video? And what android is on your google pixel 3?
@@ewertonopz5363 Android 12. Works better if you remove the usb after the phone lights up.
Pixel 3 Android 12 . I plug in the usb-c, wait a few seconds and remove it as soon as I see the startup.@@ewertonopz5363
@@b94454hey can you help me understand something. In the video, it says dead battery creates power bootloop. Does that mean the phone must not goes to 0% battery? If not it'll be bootloop?
do you know the list that support this command .. i need a tablet with this option
Perfect. Confirmed working on a MTK device (Tablet DL LT-741)
This command caused my phone to do a full factory reset and restart in some Chinese dialect. After cmd, fastboot said okay, thus "succesful". Fastboot reboot cmd and during reboot I received a droid icon with "deleting" under. My lollipop device took 5 minutes to boot, I feared boot loop. Root stayed in place and the phone turns on on charge. But good to be aware of the hard reset. thx
For the Car it would be also useful to turn device off when usb power is off.Reasons:1. Dont have to turn it off manually2. If connected directly to car baterry, dont drain it3. When car key is off, to dont drain the device's battery
Do you have a video or toturiam with that command? Please
Joao Amado
You can use tasker to power off when usb power is removed.
if you got the command, pls tell me :D
dude for turning off install tasker, like pcuser80 already said 8 months before your question. and if you dont want to spend 3€ for such a simple task (which i can totally understand) just search on google for tasker
Worked on a pixel 2 with last OS updates provided by Google. I use it as a permanently connected phone to my car with Android auto.
I used this command: fastboot oem off-mode-charge 0
So far, I ran the battery down three times, and no problem. No fruit loops. I put it on a 2.5A charger and it boots right up.
Hi, I have Lenovo A6000 & Kitkat 4.4.4 original ROM, its Automatically Power on when USB charger is plug in..Offline charging not coming. But When i upgraded to Lolipop 5.2 Rom its charging as offline..How to fixed it? Please let me know.
hey mate, i would really need your help for doing this on my galaxy tab active 2, i would pay you for helping me
I am stuck at point where i have to go to android SDK platform tools. I can not reach either that directory file or find it anywhere in my pc as well although I have downloaded and intalled it. Running the application i could not reach that point too, meaning to find that specific folder and open the command window. Any help?
Thank for this great information.
How about auto power off when the USB has no power or the USB line is removed
porfavor una pregunta esto se peude con una tablet samsung note 10.1 N8010 te lo agradesco
Perfect!Thank you for video tutorial,working great on Motorola Nexus 6
hi. nice tutrorial. i have install usb drivers of samsung i9082 and it recognizes it in windows 7 (when my phone is on) and when my phone is in fastboot mode ( i have root my phone with odin 3). When i am in fastboot mode and i go to the command prompt typing adb devices , no list devices attached are showing. So i cant use the fastboot command. Any idea ? Thanks
Wondering if you know a file to modify to make phone go ahead and turn off before full discharged. This would help solve my potential bootloop issue....
Hi,is possible to make the phone to turn on(from complete turned off state) when plugged in ?
Thank you very much for share your knowledge
Does this still work on modern phones? I need this for a pixel 3a
Great for my android weather cam !
Hi i managed to get all the way to this bit "fastboot oem-off-mode charge 0" which then displays a whole heap of commands available as in the syntax is not right for my device (Sony Xperia z3 tablet compact) i tested "fastboot reboot" and that rebooted my device ok , any help please
One correction to my previous reply. The Grand Neo does show in the device manager: "SAMSUNG mobile USB CDC Composite Device". However the "fastboot"-command is still waiting for a device to connect...
Hi cauchypotato, i have xiaomi MI 4I with 5.0.1 android version, what is the SDK platform tool version i can use to do auto power on programme.
Is it possible on my phone?
This also works on Moto G7 (power/play) and Lenovo Tab M10
Would it work on an m7?
I was able to run command (HTC M8), however it looks like it is not saved in phone memory, because every time i run this procedure start verify is 3, not 0.
Is there any tip to save this command in phone ?
fastboot oem off-mode-charge 0
(bootloader) Start Verify: 3
(bootloader) off-mode-charge: Change OK value=0
OKAY [ 0.063s]
Hi Cauchypotato, do you know about any option to turn it off once USB its removed?
Will this method work with Lenovo k6 power ?
Una use that in my future project to make my old smartphone plug-powered.., it about having a home-server controlled with an automation application (Tasker) so it can be controlled with sms messages when ever pre-set for that
Tried this on an old Galaxy S3 with cyanogenmod and booting to fastboot goes into the "Downloading..." screen (bootloader?). Running the command shows "waiting for device" and does noting... solutions?
Try installing another windows driver for your galaxy s3. Some drivers just don't work.
Will this work on a Samsung Galaxy A8 ?
Is this possible to do with a delay? which means when connected to power in 1 minute power on?
did you find any solution?
Thanks so much! This worked great.
Can this be done on a Galaxy S9??
I was trying to use my old phones as IP cameras, this was exactly what I needed! Is there a way to auto shutdown on lost USB power?
Or you use tasker, or automagic. Both you can find on the Play Store. It must be via a app, because Fastboot isn't active while android is running.
Download and install automateit pro...set the command from there
it says success for me,, but.. it still doesn't turn on when usb is connected.. so I assume that leEco Le Pro 3 doesn't work using this way. i had hopes :(
NIce!!! This would be invaluable security cam with either the Alfred app or the IP Webcam app
You can also solder the 5vdc wires directly to battery connection leads in the phone, normal battery at full charge is 4.2vdc...the extra .8vdc won't damage it at all
Great video...thanks!!!
Nice tip. I have a phone with broken USB. Removed battery. Connected a li battery charger board to battery terminals and fed 5v to charger board. Instead I could have fed 5v directly to battery terminals.
BTW, how to do this mod with broken USB?
@@desaijm You must find the pads for 5VDC and GND on the board. Some manufacturers do include some pads for machine testing, so you can easily solder to them. Try make the USB charge, then search for 5VDC on the board with a multimeter while the other probe is on GND (almost every metal part is GND) - be sure to search near the USB port for the 5VDC pad. Once found, solder it on and give it a try.
Do not supply 5v directly to a 4.2v lithium battery, even moreso not a lipo battery unless you want it to catch fire.
5v is fine if you are applying it to where the charging port 5v rail is. But DO NOT connect 5v directly to the battery.
I'm just making this comment because your comment could easily be misinterpreted
showing in cmd "waiting for device"
Yes...same
@@prashantg23 any update? I'm in the same boat
same
it´s like cmd cant authorized device while device is in fastboot
you have install driver for your device like me i am using motorola so i have to install drivers for motorola then just you have to go into fastboot mode your pc can automatically download any required drivers for fastboot
Can we set auto off on power supply disconnect??
Does anyone know why i'm getting this error when using fastboot oem off-mode-charge 0 ? I'm using HTC one M7.
(bootloader) [ERR] Command error !!! OKAY [ 0.005s] Finished. Total time: 0.008s
Can you do power off when power removed? Setting a tablet as gauges for my car
A little late, but this can be done with Tasker and a rooted device.
Does this work for the tab A?
How can I do this on a 2021 blackview a80pro
what if i want to turn on my phone if i cannot access fastboot option or any physical key is not working .... need your help to know the best way
is working! thanks a lot
will it work with old galaxy nexus?
Nexus 7 (2013) on Lineage OS -> fastboot oem off-mod-charge = 0
How do I make it do my phone screen DOES NOT turn on when I plug it in? I can't find anything like this in the internet. I have Samsung Galaxy S6 and whenever I plug it in, it turns on, and I hate that.
Can it be set to turn off when the USB is unplugged or powered off? Many thanks. Lee
Yes i too want its answer i want on phone work only while charging
For android you can install MacroDroid, is more easy than Tasker- and free
its not working on my ZUK Z2 plus, when i enter the command its showing finished but when i plug the charger it start to charge again
You have to download Android Studio now and install SDK tool from within the menu system.. That said I cant find a folder for SDK tools in the C drive so I have no way of launching the command prompt and I have no idea how to run SDK tools standalone.. Can anybody help me?
Go to the official Android Studio page (just google android studio download) then click on the download tab< then scroll to the bottom, you should see a download for android sdk platform tools.
Samsung does not recognize fastbooth. error Command: fastboot oem-off-mode charge 0 . Any alternative command via download mode?
Dude, check the bug in your description. You are doing "fastboot oem off-mode-charge 0" but your description says "fastboot oem-off-mode charge 0" and the same shit with 1
Can you do this on a tablet?
Good day Cauchy I'm hoping you might have an idea as to why this doesn't work for me. I'll explain:
I did this with my phone before following the steps in your video to create a dedicated car informant. The phone accepted the code, multiple times booted up on charge. Then I followed to steps to setup automateit, which have also all been successful. After finishing that, apparently the phone reverted back to not booting on charge...now when I enter the code in fastboot it gives the list option command list...effectively not recognizing the command.
I'm at a loss and have already bricked a phone trying to sift through the system/bin files to re-code the file responsible for the charge one phone off image...
I'm hoping I'm doing something wrong.
Thanks in advance for your time.
Ok, so it certainly has something to do with the automateit app. I force stopped the app, turned off the phone and applied charge. It booted up by itself. The app had restarted itself, so nav open on boot and all the other rules function. Disconnected power, shuts down...plugged it back in and I only get the charge icon on screen, doesn't auto-boot.
wtf?
Hi! Thanks for your video! I have a Motorola Moto G4 with Nougat. Do you think it will work with this phone? Also, does it reboot even if the phone was ON, or only while being OFF? In my case it is for a car. I would like it to power ON/boot only if it was previously OFF and ideally if the battery has been charged at least 5% or 10%.
hi,
To avoid the issue of getting stuck in power boot loop is there a way to auto boot up device when the charge has reached certain level??
I think Xiaomi devices have this feature. If phone turned off due to a dead battery, it will turn on automatically only after few minutes of charging. Don't know how they are doing this. Might be a feature of their recovery.
i’m stuck in power boot loop how to solve this??
Is there a command to shut off the device when usb turn off?
htc desire 850 - sadly does not work. The command works, but the device does not turn on when charged
it can not work with my android 7.1,why?
The OEM off mode command wasn't recognized on my asus a007 :/
any clue how i could do this without working power and volume buttons? been living on the edge for 3 months now by just keeping my phone charged at all times lol, but i'd love for this be an option, but i can get through step 1. it's a huawei honor 10
i have same issue lol maybe trough Android Debug Bridge
@@Potrinio1as a temporary solution i found an setting on my phone called 'scheduled power on' and i put it at 7am, so if my phone ever dies it'll at least power on the next day if it's charged. idk if it works tho because my phone still hasn't died yet lol
@@Potrinio1 i'll see if your suggestion could work! thanks :)
@@freddiebenson1064 i heard about it but i dont have it on my android 12. I will try to figure it out if change of android would help
work on Samsung s8 ?
Cauchupotatu
New smartphone out of the box, I noticed it a few days letter ( since then I put it in its box )
I plug the Smartphone into the charger, it starts on its own - I turn it off and it off and starts on its own !? Letting it load immediately starts automatically. While it's in the charger, I turn it off ( and it automatically turns on again ) not metter how much I turn it off while it's in the charger, ON ON ON again....
i have a galaxy s3 and in cm i get the message: fastboot is not a command blah blah blah. what am i doing wrong?
open command window from the folder where the sdk files are located (the fastboot.exe file)
Samsung devices don't include FASTBOOT (they have their own mode called "download mode").
Do you have a video to make the phone shut off when the USB power goes out? That way it turns on with the car and then turns off when you turn the car off.
You can do this with Macrodroid, but root will be needed.
mine keeps saying fastboot is not recognized
The command fastboot oem-off-mode charge 0 is not working on Nexus 7(2012) Tab, pls help . . . Its a rooted device with unlocked bootloader
He typed the command wrong. It's actually fastboot oem off-mode-charge 0
thanks for this video. it helps my problem to solve %50. But wanna ask you; How can we set our android device to automatically safety shut down when charge plug out? If you answer these, you will solve my problem properly.... Regards
Or you use tasker, or automagic. Both you can find on the Play Store. It must be via a app, because Fastboot isn't active while android is running.
the return of command is :
(bootloader) unknown argument
OKAY [ 0.001s]
Finished. Total time: 0.001s
what is the problem
my device is lenovo 7305x
Is it possible to turn off when the power is removed from USB power cable?
That might need a rooted phone and an app like Tasker
@@cojones9000 Thank you. I will investigate further.
The sdk tools only is no longer available. Do you have any recent links or instructions on how to do this? Your help is appreciated!
I found a link (dl.google.com/android/installer_r24.4.1-windows.exe) but when I install it it says that Java SDK is not installed while I just installed it.
I managed to install it following these instructions: www.thewindowsclub.com/set-java_home-in-windows-10
Going to test the rest now
I have tried this on a Lenovo tablet and it worked great but I cannot get this to work on a Samsung tab a 10.1 (sm-t510) because samsung does not have fastboot... RATS!
My ADB terminal is stuck on three dots. Help?
Samsung don't have fastboot,is there a different way to do this on them?
Try fastboot through TWRP , Orange Fox, or another custom recovery .
Is there any new way to do this without using a laptop?
Bro how to setup to turn off the phone when car key turned off
is this working on nexus 5?thanks
+DM videos It works on the Nexus 6 and 7, so most likely it will work on the Nexus 5 as well.
I have this working on my Nexus 5.
Not working. I'm using Lineage 18.1 on Redmi 7 (onclite).
I tried but the command just stuck at "..."
I am also stuck on a loading screen in the CMD. Oneplus One running Lineage OS 14.1.
good tutorial but what about shutting down after unplugging a charger ?
install tasker you can set the app to shut down your device when there is no power
The problem with this is that, we have to solve to male the android shut down after being disconnected from the power source. It should solve the problem.
What about samsung galaxy s4. I cant seem to get into fastboot and it would appear samsung doesnt support it.
s4 uses a similar mode called download mode. not sure if it lets you push fastboot commands through it.
not sure if this question is still not answered elsewhere since it was from a year ago, but your answer is here:
ua-cam.com/video/QBKD068VIjE/v-deo.html
I cant start my device...
It tries to turn on ..displays manufactur's logo ..shuts down....repeats
I cant enter into fastboot or recovery mode ..not enough charge to go after manufacturers logo screen...
Help me plz.....
Waiting for ur response
did you solve? im in same situation
Can't we configure automatic boot once charging reaches 15%?
No
mi mix 2s dont work
show always battery level, not booting
In my moto g4 play this make the phone never power off, when I press power off the phone do a reboot. Anyway, it works for me, I think... it's for a phone used as a security camera
How to do that in Samsung plz
motorola g4 play working :) but command is fastboot oem off-mode-charge disable
And how do we get it turn off the phone when usb is disconnected?
You can do this with Macrodroid, but root will be needed.