For those of you looking to actually repeat your Wi-Fi signal with this router, THIS VIDEO IS NOT FOR YOU. This only shows how to EXTEND the Wi-Fi signal from the original router by creating a Wireless Access Point. It is indeed an useful tuto but it is not wireless repeating by any means. There is actually a way to wireless repeat the wireless signal, but it needs manual advanced configuration. It can be easily found on UA-cam. And there is a setback. This little guy only repeats 2.4Ghz signal. Forget about 5Ghz. If you really need to repeat 5GHz, try a mesh or the newest powerline solutions.
I don't think you saw the complete video, yes he configured the router as an AP but he's making two AP one for 2.4 GHz and one for 5 GHz, this is better a configuration than as repeater if you can feed the router with ethernet (it's gonna be more faster and reliable)
He is right. The connection between the 2 routers is via cable not via WiFi, you guys need to pay more attention. That is what Felipe and I were looking for. I want a way to make the slave router work on WiFi alone, not through Ethernet Cable.
Worked like a charm.. Thank you so much ... Tried different methods initially but it connects to a while and then disconnects afterwards. This video helped me a lot. The trick is donot connect the lan cable to the wan port initialy. Do all the configuration and connect the cable at last
Awesome tutorial. Worked like a charm. One optimization: you should use the same name and password for the secondary wireless network. The devices will automatically switch between the primary and secondary wireless networks because they share the name and password.
This is bs don't do it, you won't be able to chose the networks because they will have the same name and also it doesn't switch automatically. when you configure your router and range extender with the same SSID, your computer/phone will still see them as two networks and will not achieve the seamless roaming you expect.
TQVM! Your video at minute 0.35 really save me. I'm using archer mr200 and configure it as a 2nd access point/extender. Already done all the step correctly, but the problem arise when i change the router ip address. (default is 192.168.1.1 & it same as per my 1st access point/router) Change it to 192.168.1.2 or 192.168.1.250-254 but everytime i did that, i can't access back the router setting/interface at browser. Until i found out that doesn't matter what no. I change, it will auto configure to 192.168.0.1 (i realize this when i watch your 0.35 video) Since the ip address is different from another one, so i just maintain it to 192.168.0.1 & my mr200 working perfectly as extender. Cheers
This model cant change to repeater mode. Stop spread wrong information. Repeater is a connection you extend via wifi not via wired/lan cable. This vid show config AP mode and you still need to connect lan cable to get coonection to internet.
@@maykelbatangan5545 i am using c1200 v2.1 wirelessly it work perfectly I bought for 2350 from local market In WDS mode not displaying internet so we can't use this any feature of this router like USB drive/access from tether app with any network On WDS you can setup it with laptop or pc only You can use wds on 2.4 & 5 both If you receiving from 2.4 It will give you internet on both bands speed will according 2.4ghz of you receive with 2.4 Best range upto 40 feet one side 5gh Like you can cover easily 80 feet by placing it in centre of house Best to by for dual band wifi wireless repeater If usb not necessary just go for a6 thats latest security patch
Whenever I setup the router as accesspoint, I can't get into the settings of the router anymore, neither with the router's ip address or the named address.
I have 5 access point @home, how can i connect automatically. Eg if am here in dining hall and try to go to kitchen i need catch on AP installed in kitchen.. Automatically... So how can I configure on this setting... Please help me
My router doesn’t bring that option in the operation mode …it’s 3G/4G router mode and another with Ewan backup Wireless router mode and another with 3G/4G backup What should I do? Main router is connected to its wan port
How can I connect enable internet on the access point without having to connect a wired line from the main router to the access point? I want to use the wireless alternative instead.( Access Point: TPlink Archer C1200).
@@hoodafukisalice The wireless access point function does not appear to be available on my TPlink Archer C1200 router and I am using a LAN cable to connect my PC.
Sir, I have a router DIR 825 as primary router. I want to increase area of my WiFi without wire so kindly suggest me which router should I buy for both band. TP link Archer C6 will work? Kindly reply me as early as possible.
Its pointless. Ive been using mine connected from the original router as a router. This just changes a bunch of settings and does the same thing. If i wanted to use a wire through the house. I would just buy another ethernet cable. Then by that point, i wouldnt even use the wifi part.
i dont really understand if this is what im searching for...i want my tp link extender to work like a router...what i mean is this....i want to insert my ethernet cable to the tp link extender and to my laptop
Can I name the wifi network with the same name as the wifi network I am extending? I noticed the in video you name it something else? Is there a reason for that?
Hey please help can it extend a wifi connection without ethernet cable like i have a wifi router and i have to extend its range without connecting ethernet cable to the second router can it do the job wirelessly
For that u will need ip addresses of all the routers that are connected and the admin password. Then u can just use ip to enter to different routers just like u log in to your own
Hate it when they make idiotic changes to the setup software. Of course, no one there could actually have enough sense to sit down an pretend to be an end user. Nowhere do they have "operation mode" in the menu for the newer Archer routers.
Okay i am a wireless engineer and let me explain you how wifi works . Wifi is a half duplex network which means at any given point of time you can either send traffic or recieve it so if you 100Mb wired link your Wifi theoretically should give 50 Mb which you will never get as there are lot of environmental factors such as noise , interference etc but lets say you get 25 Mb and now you add a repeater that scans the nearby wifi and repeats the signal it would again half the speed you get i.e 12.5Mbps that too based on if you do not have aforementioned environmental factors thus people use it with lan to lan repeater and you if lucky would get same kind of wired speed on 802.11ac .
@@vinunair1676 Repeaters and Extenders are not the same. Thanks to Walmart and Amazon, everyone things its that simple. Repeaters either have to have specialized transmitting equipment or need to be wired.
For those of you looking to actually repeat your Wi-Fi signal with this router, THIS VIDEO IS NOT FOR YOU. This only shows how to EXTEND the Wi-Fi signal from the original router by creating a Wireless Access Point. It is indeed an useful tuto but it is not wireless repeating by any means. There is actually a way to wireless repeat the wireless signal, but it needs manual advanced configuration. It can be easily found on UA-cam. And there is a setback. This little guy only repeats 2.4Ghz signal. Forget about 5Ghz. If you really need to repeat 5GHz, try a mesh or the newest powerline solutions.
Can you provide me link of that procedure?
Hey. I just wanted to ask can i connect this router to my old existing single band router? Because this is a mesh router!
I don't think you saw the complete video, yes he configured the router as an AP but he's making two AP one for 2.4 GHz and one for 5 GHz, this is better a configuration than as repeater if you can feed the router with ethernet (it's gonna be more faster and reliable)
Dude watch the video
He is right. The connection between the 2 routers is via cable not via WiFi, you guys need to pay more attention. That is what Felipe and I were looking for. I want a way to make the slave router work on WiFi alone, not through Ethernet Cable.
Worked like a charm.. Thank you so much ... Tried different methods initially but it connects to a while and then disconnects afterwards. This video helped me a lot. The trick is donot connect the lan cable to the wan port initialy. Do all the configuration and connect the cable at last
does archer a6 support extender mode
Awesome tutorial. Worked like a charm. One optimization: you should use the same name and password for the secondary wireless network. The devices will automatically switch between the primary and secondary wireless networks because they share the name and password.
What is the ip address to use after seeing it up as an access point?
This is bs don't do it, you won't be able to chose the networks because they will have the same name and also it doesn't switch automatically. when you configure your router and range extender with the same SSID, your computer/phone will still see them as two networks and will not achieve the seamless roaming you expect.
That only works if you set it up as Mesh Connection tf😂
TQVM! Your video at minute 0.35 really save me.
I'm using archer mr200 and configure it as a 2nd access point/extender.
Already done all the step correctly, but the problem arise when i change the router ip address. (default is 192.168.1.1 & it same as per my 1st access point/router)
Change it to 192.168.1.2 or 192.168.1.250-254 but everytime i did that, i can't access back the router setting/interface at browser.
Until i found out that doesn't matter what no. I change, it will auto configure to 192.168.0.1 (i realize this when i watch your 0.35 video)
Since the ip address is different from another one, so i just maintain it to 192.168.0.1 & my mr200 working perfectly as extender.
Cheers
What's the process for a wireless repeater?
So we cant use it as wireless repeater or range extender? Means i cant connect it to other wifi network and increase signal range?
ua-cam.com/video/2zDveYYo2JY/v-deo.html
This model cant change to repeater mode. Stop spread wrong information. Repeater is a connection you extend via wifi not via wired/lan cable. This vid show config AP mode and you still need to connect lan cable to get coonection to internet.
By a hack you can use it as repeater but video is about van
@@TaksaliKirpan you got the link for that?
@@maykelbatangan5545 i am using c1200 v2.1 wirelessly it work perfectly
I bought for 2350 from local market
In WDS mode not displaying internet so we can't use this any feature of this router like USB drive/access from tether app with any network
On WDS you can setup it with laptop or pc only
You can use wds on 2.4 & 5 both
If you receiving from 2.4
It will give you internet on both bands speed will according 2.4ghz of you receive with 2.4
Best range upto 40 feet one side 5gh
Like you can cover easily 80 feet by placing it in centre of house
Best to by for dual band wifi wireless repeater
If usb not necessary just go for a6 thats latest security patch
That's why it's called wired repeater mode, because for different storey you will get problem of extending through wifi access
Test
Really helpful!. However when I unplugged the wire connecting both routers, the internet goes away 😢. Please help me
I wanna use an AX 1000 as an extension to my other one, can this work wirelessly to connect across my house so that I don't have a wi-fi dead zone?
Whenever I setup the router as accesspoint,
I can't get into the settings of the router anymore, neither with the router's ip address or the named address.
Awesome it's too much help full working thank you brother
Did your speed lower into half? Because mine did after doing this.
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
I have an archer c7 V2 don't have this operation mode
I have 5 access point @home, how can i connect automatically. Eg if am here in dining hall and try to go to kitchen i need catch on AP installed in kitchen.. Automatically... So how can I configure on this setting... Please help me
I have question. My main router is tp link 841n... And i want to connect tp link archer as repeater. Is it possible?. Can i get speed with 5ghz
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
I have setup this as AP as shown in video. But now I cannot access USB via FTP from my desktop which is connected via LAN to main router(not AP).
What does this do im trying to make my tp link my main router so im able to change the ip if i get booted
Can I use this Archer C6 router to extend my jio fiber router with lan?
Hello I have two operational mode. Router mode and Access point mode. Can i do bridge for my main to any extended router using router mode??
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
My router doesn’t bring that option in the operation mode …it’s 3G/4G router mode and another with Ewan backup
Wireless router mode and another with 3G/4G backup
What should I do? Main router is connected to its wan port
How can I connect enable internet on the access point without having to connect a wired line from the main router to the access point? I want to use the wireless alternative instead.( Access Point: TPlink Archer C1200).
I'm trying to setup the C7 as an Access Point over wireless as well. Do let me know if you figured out a way.
@@hoodafukisalice The wireless access point function does not appear to be available on my TPlink Archer C1200 router and I am using a LAN cable to connect my PC.
is this setup sharing same ip dhcp pool for client to use?
Sir, I have a router DIR 825 as primary router. I want to increase area of my WiFi without wire so kindly suggest me which router should I buy for both band. TP link Archer C6 will work? Kindly reply me as early as possible.
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
Hi if there's a Qos there's a bandwith control features?
Is there any wireless extension!?
Is there wired extender for tpwl1043nd
Bro I got an issue is that I can’t use Ethernet from the tplink router(extender). Any idea that can solve this?
Is there a way to connect setup tplink AC 1350 archer c60 as a wireless repeater. I mean my modem is on ground floor and tplink is on 1at floor
Thanks, man. It worked!!
Three years have passed. You video is still helping me!
Everything was going well until i tried to log in with 192.168.1.2. It didnt find or load anything. Any help? Cheers
watch at minute 0.35. Check back your router ip address and enter the same.
Thanks a lot 😊
Vai amar TP-Link ac1200 rawter akta problem hosse bar bar signal name ta out hoye jasse.ple aktu bolben keno hosse amon
Could it work in AP mode totally wireless?
I cant get it working... idk what I've to put in at default gateway and ip
i need to know that can i use my archer53 as Accesspoint?
Can I do this and use port 1-4? Reasons is because my pc and xbox are upstairs
What is the difference of router mode.and access point ? It should be access point always that we need to choose?
Its pointless. Ive been using mine connected from the original router as a router. This just changes a bunch of settings and does the same thing. If i wanted to use a wire through the house. I would just buy another ethernet cable. Then by that point, i wouldnt even use the wifi part.
will it work if i use it as wifi repeater thru wireless connection. planning to buy archer c60/ac1350
tried？
@@quaneu9216 na i bought an huawei wifi ax3
@@robmacoy2085 how about the peformance drop
more than 50%？
How did you connect two routers?
It's working, but after few hours it's shows no internet connection. Daily i have to do the same process twice or thrice... Very annoying
hi, what type of wifi route do you use ? is it A6 AC1200 with4 ant or C1200 with 3 ant ?
can I connect TP-Link AC1200 Archer A6 Smart as WIRELESS Extender with existing router
Were you ever successful? I want to do the same thing. TIA!
@@leroyjones1964 No, i had to use LAN cable to create an access point.
i dont really understand if this is what im searching for...i want my tp link extender to work like a router...what i mean is this....i want to insert my ethernet cable to the tp link extender and to my laptop
What about as Wireless repeater setup?
wow, wondering if I can do it with an Asus RT-AX68U that takes internet from a FIBER Gateway...
INCREDIBLY I did! now have the Archer D7 connected to the ASUS as a repeater! Great job! grazieeeeeee
my repeater speed is much slower than the main router. what can i do?
It works !!! Thanks !!!
Is this setup also called BRIDGE MODE?
Why my router no operation mode even exactly same with this video TPlink Ac1200,after login homepage same but no operation mode why
I need it for wireless repeater configuration... for the tplink archer D2 AC750 and the tplink WR940N
ua-cam.com/video/2zDveYYo2JY/v-deo.html
Thank you.
can i use it with out a wire
Can I name the wifi network with the same name as the wifi network I am extending? I noticed the in video you name it something else? Is there a reason for that?
No reason. You can give same name.thankyou
Does this model has capabilities to be used as a wireless repeater? My modem its in another floor so its complicated to use a ethernet
yes, also this is expensive, go for TP link Archer C60, you can use as access point or Also, it has wds, with which you can setup as extender
Can u show Wds mood and connect pls..
can i plug this into my modem as use it as a regular wireless router?
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
How to set limite others divides please help me
that`s very useful
thank you
please help after using my router as repeater in jio fiber i can't access my router ip setup for password changes and all, how i can
You cannot use router features when setting it up as AP. You can only access the jiofiber modem page for any configuration
Hey please help can it extend a wifi connection without ethernet cable like i have a wifi router and i have to extend its range without connecting ethernet cable to the second router can it do the job wirelessly
No
Can we change the mumimo feature in access point mode ?
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
Sir can i use tplink acher 1200 as a wireless repeter
Tell me how thanks u
bro how can i access the routers connected to the main router? i mean the wired clients how can i access their routers? thanks
For that u will need ip addresses of all the routers that are connected and the admin password. Then u can just use ip to enter to different routers just like u log in to your own
"Local Management via HTTPS is disabled. Please access the device via HTTP"
Care to help? 👀
Sir System tools ka option nahi he only System ka option he kiya kare sir
Thanks
Good job buddy
Hats off woks well
need help i bought archer ax20 to use it as a wireless repeater is it possible?
it will lose your internet speed
better with wired
Thank you sir
m
ine doesnt have this selection of modes
when i create my password - it doesn't give me the option to access 'advanced' settings. can someone help
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
i can't see the operation mode button after login
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
Sir please tell me tplink4grouternotdetectingsimcard it always says insert the sim into sim slot please reply
Is it necessary to disable DHCP in acess point mode?
WELL YEAH THAT'S WHAT MAKES IT A "ACCESS POINT"
ITS LIKE ASKING IF YOU NEED WHEELS ON YOUR CAR
yes
this is no good ,too many set up to do ..no good system from senior router developer..hays
Ple any body solution please
I didn't see where you insert password of wifi
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
Tiplik 850n Tap to share disable kaise karega new video dada diye
But i want wireless extent wifi
This is BS, it can´t be both. You use it as a Range Extender or as a AP.
music?
i got no connection..
No instruction for a wireless repeater.
That'd be cool if I didn't need to plug an ethernet cable into the back of if
Hate it when they make idiotic changes to the setup software. Of course, no one there could actually have enough sense to sit down an pretend to be an end user. Nowhere do they have "operation mode" in the menu for the newer Archer routers.
I want to configure my old router
ua-cam.com/video/vgd7iWSwjVk/v-deo.html
I wish it's not thau noisy
goood
🧢🧢
Twirling the cursor is annoying.
How to link ac1750 can be used as a repeater with mobile hotspot?
Pathetic router !! It should have capabilities to scan for wirless network nearby and repeat it..who uses wired connection for repeating
I do. And everyone who does not want to lose internet speed or range.
Okay i am a wireless engineer and let me explain you how wifi works . Wifi is a half duplex network which means at any given point of time you can either send traffic or recieve it so if you 100Mb wired link your Wifi theoretically should give 50 Mb which you will never get as there are lot of environmental factors such as noise , interference etc but lets say you get 25 Mb and now you add a repeater that scans the nearby wifi and repeats the signal it would again half the speed you get i.e 12.5Mbps that too based on if you do not have aforementioned environmental factors thus people use it with lan to lan repeater and you if lucky would get same kind of wired speed on 802.11ac .
@@vinunair1676 Repeaters and Extenders are not the same. Thanks to Walmart and Amazon, everyone things its that simple. Repeaters either have to have specialized transmitting equipment or need to be wired.
Music is too loud...
Bro I've watched all of ur vdos. I have some doubts. Need ur help. I've messaged u in instagram. Can u pls take a look.
Bewakoof
can I connect TP-Link AC1200 Archer A6 Smart as WIRELESS Extender with existing router
ua-cam.com/video/vgd7iWSwjVk/v-deo.html