How to Turn Any Wi-Fi Router into an Access Point or Repeater | Step-by-Step Guide

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 60

  • @MorganEdgy
    @MorganEdgy Місяць тому +1

    Thank you for the detailed explanation, I would only want to know, why can't we connect it to the WAN port in the older ones?

  • @mraz7940
    @mraz7940 5 місяців тому +3

    Bro good evening. I have tp link ax 53. I config as access point. Wired repeater is the same with wired repeater set up?

  • @HuyTran-v5v1k
    @HuyTran-v5v1k Місяць тому

    This is the best simple explanation i came across on you tube 👍

  • @blgillespie1
    @blgillespie1 4 місяці тому +2

    Hey, thanks for your videos! Can you please record one of these videos on the Netgear Nighthawk series routers, and include the software settings? Thanks!!!

  • @sodawaterbottle
    @sodawaterbottle Місяць тому

    Hi, I liked your video and your knowledge to make the setup process very simple. I have two questions… 1) What is the difference between a Repeater and an access point? 2) Out of the two, which one is better? I have CAT-6 cable laid from the main ISP router to each room.

  • @That_007Guy
    @That_007Guy 6 місяців тому +1

    Good explanation, pare. Stay dry if your in the Philippines👊🏼

  • @rufdoniedubalan2087
    @rufdoniedubalan2087 4 дні тому

    Is it possible to connect to the main router even without utp cable by using wifi?

  • @jbjeppu2488
    @jbjeppu2488 Місяць тому +1

    Is Ethernet cable is necessary between old router & modem....can we place the old router far away without connecting cable and connect internet ?

    • @savagegtalks5912
      @savagegtalks5912 10 днів тому

      short answer: some wifi router can yes.
      Like you see in the video, the router asks him if he wish to have it wireless. Make sure yours have that option, or get one that can, if you need without cable.

  • @AjaykrishnanPR
    @AjaykrishnanPR 6 місяців тому +1

    After I disabled DHCP server and save it is showing address is invalid

  • @fatesteyneit2990
    @fatesteyneit2990 4 місяці тому +1

    so is it on the second router you plugged the ethernet on the WAN instead on LAN like the first one ? what was the restriction.. you never explained

    • @chaitanyagupta1335
      @chaitanyagupta1335 2 місяці тому

      What if you just connect to WAN and it'll create a wifi. I mean why go thru such hassle of making it a repeater

  • @jahurakhanam3148
    @jahurakhanam3148 6 місяців тому

    clear and simple love love love

    • @jhayjhayjack1812
      @jhayjhayjack1812 4 місяці тому

      anong clear ka jan wala nga siyang gnawa kundi sinaksak e hndi gumana ung wireless na gnawa nya kaya sinaksak na lang sa isang router para hndi lang mapahiya sa video

  • @warrensanchez2049
    @warrensanchez2049 Місяць тому

    How about a router from pldt, globe or smart...you cannot find details at the back. Can you make a video on how to reused it as extended router

  • @fernard8985
    @fernard8985 2 місяці тому

    I have a Huawei B535 I want to configure as an access point. I switch off the DHCP and assign one of the IP from the main router's address pool but it's not working. The other router i have, ZTE, works without issues as an AP. Not sure what is causing it.

  • @emmkes-ed3hw
    @emmkes-ed3hw 7 місяців тому

    What about a router and a portable mifi(wirelessly)

  • @gulobazubair
    @gulobazubair 7 місяців тому

    Make a video on how to change Nat type especially for gaming... I have a Huawei router but don't know how too. Even placing ip adress in dmz, my console still says type 3

    • @bradblackmore2627
      @bradblackmore2627 Місяць тому

      I used to have this issue all the time when i had a roommate. I would have to reset the router almost every day and make sure i was the first to log into my PlayStation to make sure i got the type 2 (open) nat type.

  • @itslevi1004
    @itslevi1004 6 місяців тому

    Good PM, can i connect starlink mess directly to PLDT Home fibre?

  • @krishnabalan8487
    @krishnabalan8487 6 місяців тому

    Nice one bro👍😀

  • @tyronearendse1722
    @tyronearendse1722 7 місяців тому +1

    Hi friend thanks for the informative video. After connecting the TP link with the main router can you place the TP link anywhere in your house without the yellow cable?

    • @torogipro
      @torogipro  7 місяців тому

      Nope bruh. It needs to wired. Unless ur tp link supports repeater mode then you can do it with cable.

    • @tyronearendse1722
      @tyronearendse1722 7 місяців тому

      @@torogipro thank you for your response

  • @brandonlamagna7250
    @brandonlamagna7250 Місяць тому

    how can i limit the speed of each wifi router? I am planning to extend my wifi in our outdoor bar.

  • @krstndiane609
    @krstndiane609 3 місяці тому

    how would i know if my linksys router has the feature to be a wireless repeater? I did search but was not able to get answer.

    • @bradblackmore2627
      @bradblackmore2627 Місяць тому

      This is what i would like to know as well. What's the point of it being wired when you can just run it to the main then?

    • @martinsrava7284
      @martinsrava7284 13 днів тому

      @@bradblackmore2627 you extend the signal strength

  • @PrashanthaKumanayake-rb6fm
    @PrashanthaKumanayake-rb6fm 5 місяців тому +1

    If a Wifi router only have one RJ45 socket (LAN/WAN) , can't we use it as AP?

  • @shinakizawa4624
    @shinakizawa4624 Місяць тому +1

    Using this method slows the internet speed a lot like it’s not even working when connected to either router
    Please help
    It starts working normally only after I disconnect the Ethernet and connect to the og router

  • @dijonmustard3297
    @dijonmustard3297 3 місяці тому

    Incredible video

  • @4custaywithme
    @4custaywithme 6 місяців тому

    My guy pliz do a video on phone Gps/gyroscope/accelerometer,also something on starlink actuated kit and the rest. do keep me waiting pliz. my phone is realme c33 128 gb i can see the gps also but the gyroscope no.Thanks again for the rooters kudos.

  • @rodolfolopes4443
    @rodolfolopes4443 3 місяці тому

    Thanks you very much🎉

  • @proverbswarrior1
    @proverbswarrior1 7 місяців тому

    Sir Guaki. Do you have flipper zero. Give me one.

    • @torogipro
      @torogipro  7 місяців тому +1

      Bruh, I dont use flipper zero😆

  • @dynamic_jameson
    @dynamic_jameson 3 місяці тому +19

    You should have not used "ANY" in your desciption. Click bait title

  • @TechDripPH
    @TechDripPH 7 місяців тому +3

    After I disable the DHCP on my old router, I can't connect to it anymore "Obtaining ip address" . Even after connecting it to my main router it is still "Obtaining ip address"

    • @torogipro
      @torogipro  7 місяців тому +1

      Thats the last settin you need to do. Once you disabled dhcp then you connect it to the main router that will send out IP address

    • @MiniSamuel-gg3bb
      @MiniSamuel-gg3bb 7 місяців тому

      How to return the wifi router to its original state

    • @torogipro
      @torogipro  7 місяців тому +1

      @@MiniSamuel-gg3bb do a full factory reset bruh

    • @blitzae
      @blitzae 6 місяців тому

      same problem

    • @AnilKumar-se1be
      @AnilKumar-se1be 4 місяці тому +1

      Can we connect it through wireless

  • @crssmd8428
    @crssmd8428 Місяць тому

    Ty bro

  • @Mjc56ps92
    @Mjc56ps92 2 місяці тому

    I have a wireless n repeater can anyone let me know why it's not showing in my list of networks and when I enter ip address in web browser it not doing anything?

  • @vjsaradhi7
    @vjsaradhi7 Місяць тому

    Tplink acts as repeater but for very short duration, how to set for long and even after power restart it has to work automatically

  • @dondizzy104
    @dondizzy104 4 місяці тому

    My friends your method is working, im using it to my ps5 with lan wire but sometimes the connection lost and im dont know why do i have to unable my firewall in the main modem

  • @AweSome-m5f
    @AweSome-m5f 4 місяці тому

    Hello, asking quietion, i have netgear nighthawk model C7000v2. Can i connect or repaet wifi from tmobile home internet 5g ? Because netgear nighthawk no line wan, have 4 line all is ethernet, 1 is coax. Thank you.

  • @FuryKnightss
    @FuryKnightss 27 днів тому

    Im using Huawei router. And when i turned off DHCP server. My phone wouldn't connect to the Wired Router extender.. why is that? But when DHCP is enable. Its fine

  • @essuthetaekwondoin
    @essuthetaekwondoin 7 місяців тому

    thk you

  • @chanakya4041
    @chanakya4041 2 місяці тому

    First you connected lan to lan. But in second you connected lan to wan. Why. can you pls tell

  • @1minuteGita
    @1minuteGita Місяць тому

    the link speed of my router is 50 mbps on 2.4 Ghz I think it won't be able to repeat a 5G signal

  • @trae74
    @trae74 Місяць тому

    When I try to open the router ip web page, it doesn't load.
    Ok so now the issue I'm having is the ip on both routers is the same.

  • @jhayjhayjack1812
    @jhayjhayjack1812 4 місяці тому

    klaseng tutorial yan hirap na hirap ka dn e haha repeater cinonnect mo naman sa isang router baka turuan pa kita

  • @AnimeMaster440
    @AnimeMaster440 6 місяців тому

    can i join ur clan coc.. nice explain verywell

  • @jhayjhayjack1812
    @jhayjhayjack1812 4 місяці тому

    paano mo nasabing wireless repeater gnawa mo e naka wired ka nga parang sinaksak mo lang na walang nangyari boss haha

  • @jhayjhayjack1812
    @jhayjhayjack1812 4 місяці тому

    pa speed test ka pang nalalaman naka wired ka naman

  • @rehaanu
    @rehaanu 5 місяців тому

    Is that a nokia

  • @jhayjhayjack1812
    @jhayjhayjack1812 4 місяці тому

    magtagalg kana lang kaya hirap na hirap ka na e